TP-LINK TD-W8960N - Firmware | [Firmware]: 300 Mbit / sMb \ s | 4xLANx100Mb



Rep: (2)
TP-LINK TD-W8960N - firmware
firmware: Do not have time to see if someone will take advantage of the dump please check the firmware version and let the topic, then tinkering in the cap

Attached Image
Attached Image
Attached Image

Description
They brought me to repair a routerTP-LINK TD-W8960N V 7.0
The problem was on pitaniyu.Vnutri router worth stabilizer body
Sot23 if anyone knows what it understands takoe.Tak here
on one of the legs of the stabilizer comes to certain food
Well say +3 or + 5V and ceramic capacitors are usually placed
one foot to the other to + - Well, I had closed the capacitor
that it is obtained from the closed plus minusom.Prichinu ustranil.Posle checked
by typing in the IP router's browser bar192.168.1.1 I hit the Web page settings.
Prveril on Android device opredelilos.Otdal client, everything is normal, the customer is satisfied.
And just in case it merged with flushes dump another language full flash
Dump read out the programmingTL866A
Here lay the dump can not believe someone would ever need it.
Therefore, I put in a dumpcloud mail I .naskolko know I may be wrong though
sdes on the forum I have not found so this marshrutizatore.Imenno this model I have
in vidu.Vot small infa, what could be written off as long as I have it was under repair

TP-LINK TD-W8960N V 7.0
1 processor
Broadcom
BCM43217TKMLG
TN1639P11
2 Processor
Broadcom
BCM6318KMMLG
TE1638P20
3-SPI Flash
Winbond25Q32VFSIG
Additional Images
Attached Image
Attached Image
Specifications
Specifications

Type Wi-Fi ADSL access point
Support for "ADSL2 +" technology has
Wireless standard 802.11n, 2.4 GHz frequency
Supports MIMO technology has
The maximum wireless speed of 300 Mbit / s
Information Security WEP, WPA, WPA2
Power transmitter 20 dBM
switch 4xLAN
Port speed 100 Mbps
The "bridge mode" there
The router is
Firewall (FireWall) is
Technology "NAT" there
Filtering packets based on the state of the data connection has
Built-in "DHCP Server" have
Support has Dyn DNS
Demilitarized Zone (DMZ) is
Static routing is
dynamic routing protocols RIP v1, RIP v2
Support for "VPN pass through" technology has
The number of external antennas 2 x 3 dBi
External antenna type removable
The presence of "Web-interface" has
Telnet access is available
Support for "SNMP" technology has
VLAN support has
Dimensions (Wxhxd) 195x36x130 mm

Full flash (dump) can be downloadedBy this link
Warning: As far as I know, when the read dump fullflash all settings as they are transferred from a flash.
If someone else uses the data dump for recovery (revival) of your router, I recommend after flushes programming
to makereset -Resets the factory settings (a reset button located on the back of the router body) for a given device is configured as a full network is hidden.

Topic Curator: Topic with no curator


Post has been editedavg73 - 25.12.18, 01:05
Reason for editing: added a link to jump full flash (dump)



Rep: (0)
Good day !
A full flash on the V5 version is no coincidence, or do not tell me where to find? I want to return home with firmware openwrt, according to the instructions on the Internet at Tplink does not work. May have specific instructions for model W8960N v5.



Rep: (2)
gamaynov @ 19.12.18, 22:58*
A full flash on the V5 version is no accident

Yet, if you will get to consider and repair or lay you on the e-mail if that, but there are no



Rep: (79)
avg73 @ 22.10.18, 03:08*
Full flash (dump) can be downloaded from this link

Attached Image


The iskorozhen archive?

Post has been editedtsss13 - 24.06.19, 11:41



Rep: (5)
And there is the firmware to a version of TD-W8960N v1-3?



Rep: (32)
Hello everybody. IPTV slows when changing channels, with what can be connected?



Rep: (2)
AmYn @ 30/07/19, 19:18*
And there is the firmware to a version of TD-W8960N v1-3?

8960v3 8960v1

Attached files

Attached file8960_V3_ok.rar(3.8 MB)
Attached file8960_V1.rar(3.83 MB)



Rep: (0)
He died a modem, but v8.
Lit only by light and power, if connected, LAN.
On reset is not responding.
Just stopped working all of a sudden, in the middle of work.
Do not tell whether there is an opportunity to revive him?
Attached Image



Rep: (0)
Add information.
At power-up while pressing the reset button, the proposal goes to update the firmware. But the firmware on this site (the only one) is not suitable.
Maybe it needs to be in something to rename? Or need some special firmware = -What?



Rep: (2)
Likely to flash through 8960V8 rekaveri fail. I have to work the firmware dump, if there is a programmer you can try to fill. The trouble this model overheating CPU Broadcom degradation from c 5 version removed the radiator. It is advisable for them to glue the heat sink and chip Wi-Fi too. If you want a dump, then on Monday I can throw.



Rep: (0)
Alexflex

Good day please throw off a dump I also very problem on and reboots and the processor heats normally here I think to fill dump



Rep: (2)
Sorry runs. Here dump name has poppy address. in Hex editor can be replaced.

Attached files

Attached file8960_V8_34E89447A7EE.rar(1.99 MB)
Attached file8960_V8_7C8BCA643108.rar(1.99 MB)



Rep: (0)
Hi all, who knows how to limit the speed of the connected device to this router?



Rep: (17)
Guys. Hello everyone! There is this device v6, I want to sew on openwrt. I searched, found nothing there at all customization on this device? Gargul or ddvrt. Stoke generally started to slow down and pick off air network connecting devices 5



Rep: (0)
Hello how to limit the speed of the other user, I did not find this model of DHCP



Rep: (0)
Good day, this problem all the time rebooting the router, in turn light up the network, and then after half a second dsl (inserted cord or not does not matter), and even after half a second, all indicators except vayf, then they all go out later turns wai fi, and then he goes to reboot, and so is cyclical, reset does nothing, if included in the network while holding the button reset, it burns only network, and nothing else, no matter what does not respond, and after switching off and on the network begins scenario of perpetual reboot, when connected to a computer, and he sees a couple of seconds when you turn on, and then continue with the reboot anymore.
Disassembled, and rang all that is possible, in order Conder unit produces 9c. even from paranoia solder the new Kander, did not help, noticed just cool is that it can be?



Rep: (0)
Good day !
A full flash (dump) on the V6 version is no coincidence, or do not tell me where to find? I want to return home with firmware openwrt, model W8960N (RU) v6. thanks in advance



Rep: (2)
W8960N (RU) v6 by content similar to the version 5. Try it from version 5 to fill dump

Attached files

Attached file840_V6_AC84C665DEDA.rar(3.82 MB)


Post has been editedAlexflex - 22.05.20, 12:32



Rep: (0)
Welcome and have a v8 in the firmware? And nowhere points to lan wan to convert. I had read somewhere that the firmware needed



Rep: (0)
Alexflex @ 22.05.20, 14:29*
Thanks for the help but it does not dump the dump came home needed



Rep: (2)
Ras_kr sorry not the attached file

Attached files

Attached file8960_v5_60E3272B206C.rar(5.75 MB)


Full version    

Help     rules

Time is now: 26/05/20, 18:37