X96Max (S905X2) [Android] | [Media console]



Rep: (338)
DiscussionX96Max (S905X2)
Tv box
Discussion пїЅ | Marriage and Repair пїЅ | Catalog of programs for Android set-top boxes пїЅ | Games for Android TV Box пїЅ | IPTV playlists пїЅ | discussion panels |



Specifications
old revisions
  • OS: Android 8.1 | Android 9.0
  • CPU: Amlogic S905X2 quad-core Cortex A53 to 2 GHz
  • GPU: Mali-G31 MP2 Dvalin
  • ROM / RAM: 32/64 GB + 4GB LPDDR4
  • Network: Gigabit Ethernet, WIFI 802.11 b / g / n / ac, Bluetooth 4.0
  • Video output : HDMI 2.1 to 4K at 75 Hz with HDR, AV-port 3.5mm (composite).
  • Audio: analog stereo audio through the AV-port digital audio via HDMI and optical S / PDIF
  • USB: USB 3,0x1, USB 2,0x1
  • Nutrition: 5V / 2A
  • Miscellanea: IR port for the external receiver and a slot for microSD memory cards

---------------------------------------------------------------------
  • OS: Android 8.1 | Android 9.0
  • CPU: Amlogic S905X2 quad-core Cortex A53 to 2 GHz
  • GPU: Mali-G31 MP2 Dvalin
  • ROM / RAM: 16 GB + 2GB LPDDR3
  • Network: 100 Mbit / s Ethernet, WIFI 802.11 b / g / n
  • Video output : HDMI 2.1 to 4K at 75 Hz with HDR, AV-port 3.5mm (composite).
  • Audio: analog stereo audio through the AV-port digital audio via HDMI and optical S / PDIF
  • USB: USB 3,0x1, USB 2,0x1
  • Nutrition: 5V / 2A
  • Miscellanea: IR port for the external receiver and a slot for microSD memory cards
new revision
  • OS: Android 8.1 | Android 9.0
  • CPU: Amlogic S905X2 quad-core Cortex A53 to 2 GHz
  • GPU: Mali-G31 MP2 Dvalin
  • ROM / RAM: 32/64 GB + 4GB LPDDR3
  • Network: Gigabit Ethernet, WIFI 802.11 b / g / n / ac, Bluetooth 4.0
  • Video output : HDMI 2.1 to 4K at 75 Hz with HDR, AV-port 3.5mm (composite).
  • Audio: analog stereo audio through the AV-port digital audio via HDMI and optical S / PDIF
  • USB: USB 3,0x1, USB 2,0x1
  • Nutrition: 5V / 2A
  • Miscellanea: IR port for the external receiver and a slot for microSD memory cards
A photo
Attached Image
Attached Image
Attached Image
Attached Image
How to determine the audit?
Reveals the console and see the markings on the board next to the CPU.
Example.

The old revision with 2GB RAM
Q5X2 V1.0 18482
Q5X2 V1.5 19023
Q5X2 V2.0 18375
Q5X2 V4.0 18472

The old revision with 4GB of RAM
Q5X2 V3.0 18395
Q5X2 V5.0 18483
Q5X2 V5.5 19015
Q5X2 V7.0 19133

The new revision with 4 GB of RAM
Q5X2 LP3 19215
Firmware
Linux
PC software


Recovery
Instructions
Useful


Polls
Attached Image


Before asking a question in the subject line, please use the search engine!
Attached Image


filling cap proposals sent to QMS

Post has been editedCuphead - Yesterday 12:24
Reason for editing: TWRP 3.3.1-0 OFFICIAL



Rep: (87)
All the good days. : Thank_you:
Good overview S905X2.
Cry



Rep: (124)
Vasily_5 @ 05.12.18, 11:59*
A firmware than collected. ?
The fact that amlogic tool makes it ugly.
Customization tools program does not work with Android 8.1

img here and do not need - OTA at the time.
Damn, I have the same 2/16 - so probably not core mekula starts ....
Who has the version with 4 gigs, check ...
instructional:
1. take KM9-ota-V0828.20181109.zip
2. replace the script on bezproverochny:
# (! less_than_int (1541749957, getprop ("ro.build.date.utc"))) || abort ("E3003: Can't install this package (Fri Nov 9 15:52:37 CST 2018) over newer build (" + getprop ("ro.build.date") + ").");
#getprop ("ro.product.device") == "KM9" || abort ("E3004: This package is for \" KM9 \ "devices; this is a \" "+ getprop (" ro.product.device ") +" \ ".");
#ota_zip_check ();
#ui_print ("Target: Amlogic / u211 / u211: 8.1.0 / OPM1.171019.011 / V0828.20181109: userdebug / test-keys");
set_bootloader_env ("upgrade_step", "3");
show_progress (0.650000, 0);
ui_print ("Patching system image unconditionally ...");
block_image_update ("/ dev / block / system", package_extract_file ("system.transfer.list"), "system.new.dat.br", "system.patch.dat") ||
abort ("E1001: Failed to update system image.");
show_progress (0.100000, 0);
ui_print ("Patching vendor image unconditionally ...");
block_image_update ("/ dev / block / vendor", package_extract_file ("vendor.transfer.list"), "vendor.new.dat.br", "vendor.patch.dat") ||
abort ("E2001: Failed to update vendor image.");
ui_print ("Patching odm image unconditionally ...");
block_image_update ("/ dev / block / odm", package_extract_file ("odm.transfer.list"), "odm.new.dat.br", "odm.patch.dat") ||
abort ("E2001: Failed to update odm image.");
show_progress (0.050000, 5);
#package_extract_file ("boot.img", "/ dev / block / boot");
#ui_print ( "update logo.img ...");
#package_extract_file ( "logo.img", "/ dev / block / logo");
#ui_print ("update dtb.img ...");
#backup_data_cache (dtb, / cache / recovery /);
#write_dtb_image (package_extract_file ("dtb.img"));
#ui_print ("update recovery.img ...");
#backup_data_cache (recovery, / cache / recovery /);
#package_extract_file ("recovery.img", "/ dev / block / recovery");
#ui_print ( "update bootloader.img ...");
#write_bootloader_image (package_extract_file ( "bootloader.img"));
show_progress (0.200000, 10);
set_bootloader_env ("upgrade_step", "1");
set_bootloader_env ("force_auto_update", "false");
set_progress (1.000000);

3. The necessary comments / razkommentim (dtb not replace !!!)
4. Signing instalim and update it (twrp can unsigned)
If not arbaytn, then
5. It is necessary to take the core from KM9, push back from dtb x96max - collect core and through dd to twrp terminal it is entered and try.

Post has been editedupravdom - 05.12.18, 13:20



Rep: (3490)
upravdom @ 5.12.18, 12:18*
Damn, I have the same 2/16 - so probably not core mekula starts ....
So throw off the branch on which assembled. We will test. Many boxes version 4 GB Ram.



Rep: (1)
Hello everyone! an urgent need to decide today what to take x96 max vs mi box s
so the question who already reached the prefix x96 mah:
as the case with rollers on YouTube 2160p and support VP9
as heating at the same time?



Rep: (124)
Vasily_5 @ 05.12.18, 12:38*
So throw off the branch on which assembled. We will test. Many boxes version 4 GB Ram.

It's a gig, and I run away
Here foolproof - who will not be able to collect the box zaporet not, and then I'll be guilty of a brick :)



Rep: (6)
upravdom @ 5.12.18, 13:45*
who will not be able to collect the box does not zaporet

And the poke a finger in the software which can be assembled / disassembled * img: blush:



Rep: (3490)
* upravdom Yes that's for sure, and then a lot of questions will be.
Let's mare.
In the evening I can check.
And the guys totally forgot yesterday to check for XPMC.
No. I do not work amcodec, added through
/system/etc/public.libraries.txt
libamcodec.so added to the lib folder.
Solid Zielonka goes.
A little later, I will unsubscribe screenshots lay.

Post has been editedVasily_5 - 05.12.18, 16:17



Rep: (2524)
* upravdom * Vasily_5,
Housekeeping tip: if the kernel boot.img / kernel.img throw on a flash drive inserted into yusb 3.0 and perform a reboot update bootloader loads the kernel from there (well, at least try to) ..

Posted on 12/05/2018, 14:09:

remsus @ 05.12.2018, 13:48*
...
And the poke a finger in the software which can be assembled / disassembled * img: blush:

The signature



Rep: (3490)
A.S._id @ 5.12.18, 13:05*
Housekeeping tip: if the kernel
Well you can and pour through the hose.
dd if = / sdcard / boot.img of = / dev / block / boot
It does not matter as the main thing correctly assembled.

Post has been editedVasily_5 - 05.12.18, 14:20



Rep: (295)
And at the core of our firmware traditionally absent cifs? In Hades, you can see in tutoshnih reviews / review about this kind did not mention ...



Rep: (20)
Hello, I ordered a 4/32. I read the topic and can not understand why something that will come in the run-off is necessary so to distort, to break? Something does not work or why these dances with a tambourine? Recompile the kernel, the bricks get it ... why? Or just masochism :)



Rep: (295)
* z-zander
Here's how to get the parcel, then you will understand ... :) this type of technology is almost neubivaem, "bricks" are stitched again and continue working. A dopilivat firmware is necessary, drain even Yabloko does not fit all ...



Rep: (20)
kigba @ 05.12.2018, 20:27*
* z-zander
A dopilivat firmware is necessary, drain even Yabloko does not fit all ...

So I want to understand why this is necessary? What's wrong? For games of course it will not work, at least for serious, there is at least for sewn. Movies I realized PCD pulls no problems, it is necessary to watch telly 4k have sootvetsvuyuschitsyuy, and the difference is not particularly carried movies to watch, if only for neshenal Geographic viewed drops on leaves :)



Rep: (11)
z-zander @ 05.12.2018, 16:42*
...
For games of course it will not work,
I ordered exclusively for the game, and the straight bit for video !!!!



Rep: (295)
* z-zander
Uh ... you want to pay the owners of TV boxes to Buddhists? They sent (sent), then good? Will not work! :-D



Rep: (169)
I came console box still in the "air"

Attached images
Attached Image



Rep: (6)
fontan83 @ 5.12.18, 17:35*
I ordered exclusively for the game

Excuse me, but on it yet and you can play?



Rep: (3490)
Vasily_5 @ 5.12.18, 12:50*
And the guys totally forgot yesterday to check for XPMC.
No. I do not work amcodec, added through
/system/etc/public.libraries.txt
libamcodec.so added to the lib folder.
Solid Zielonka goes.
A little later, I will unsubscribe screenshots lay.

Run the Auto Frame Rate in SPMC using a script.
Well, in general, guys, things like that. I decided to try to remove the default KD Player and set the SPMC, installed version v7a 16.7.2 is what I did in the archive ..
Attached Image

Go to Settings - Videos - Acceleration. Enable hardware acceleration - amcodec.
Turn test video Auto Frame Rate does not work and there is a video, but gets one green fodder.

Yes naturally Droid Setting settings enabled.
OK we go further I go to the Settings - Video disable hardware acceleration - amcodec.
I turn on hardware acceleration Media Codec (Surfase)
I go to test video I turn. And as we can see from the screenshots video goes without Auto Frame Rate.
Screenshots turns a video image This indicates that the Auto Frame Rate did not load.
Attached Image
Attached Image
Attached Image
Attached Image
The same picture when hardware acceleration Media Codec.
Not fire Auto Frame Rate.But I want to note that there is a video without any pull is enough.
OK dalie think Install script for Auto Frame Rate launch.
Install script version 2.1.0. Well, it is considered new only recently released. Here I was an error an error when the script is run.
OK. what to do next? Remove Scripts install an older version of the script 2.0.6.
Creaking established the message "Add-ons Installed". Run a script Go to the Settings - My additions - Software additions -
We find addition Frequency Switching configuration. And click Update.
Updated version 2.1.0.
But going to the Service upgrade. It not, as promised (v2.1.0: 25hz and 30hz modes).
Here you can download a new script.
https://github.com/jef…ency.switcher/releases
Well, what do we establish what it is. Back to the test videos include Opanki fires Auto Frame Rate. shows video.
We can see from the screenshots of the picture is not seen as the fires Auto Frame Rate.
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image

These are the tests.
So avtofreymreyt our boxes work.
Picture


Post has been editedVasily_5 - 15.12.18, 11:52
Reason for editing: In the Hat



Rep: (11)
remsus @ 05.12.18, 18:03*
Excuse me, but on it yet and you can play?

You take two of the joystick, you go to a theme android game supports a joystick or a mouse, and enjoy

Attached images
Attached Image


Post has been editedfontan83 - 05.12.18, 18:29



Rep: (295)
* Vasily_5,
It turns out amkodek gone forever ... with a tambourine screwed PRA Cody (ICPC) still works with mediakodekov because by amkodeka sense is not even with the PRA, although no. Hence the conclusion - it makes no sense "drag" the old version of Cody / ICPC and should use a stable 17.6 or 18 RK. They even MultiCH HD displays :)


Full version    

Help     rules

Time is now: 06/01/20, 4:09