X96Max (S905X2) [Android] | [Media console]



Rep: (338)
DiscussionX96Max (S905X2)
Tv box
Discussion » | Marriage and Repair » | Catalog of programs for Android set-top boxes » | Games for Android TV Box » | IPTV playlists » | discussion panels |



Specifications
old revisions
  • OS: Android 8.1 | Android 9.0
  • CPU: Amlogic S905X2 quad-core Cortex A53 to 2 GHz
  • GPU: Mali-G31 MP2 Dvalin
  • ROM / RAM: 32/64 GB + 4GB LPDDR4
  • Network: Gigabit Ethernet, WIFI 802.11 b / g / n / ac, Bluetooth 4.0
  • Video output : HDMI 2.1 to 4K at 75 Hz with HDR, AV-port 3.5mm (composite).
  • Audio: analog stereo audio through the AV-port digital audio via HDMI and optical S / PDIF
  • USB: USB 3,0x1, USB 2,0x1
  • Nutrition: 5V / 2A
  • Miscellanea: IR port for the external receiver and a slot for microSD memory cards

---------------------------------------------------------------------
  • OS: Android 8.1 | Android 9.0
  • CPU: Amlogic S905X2 quad-core Cortex A53 to 2 GHz
  • GPU: Mali-G31 MP2 Dvalin
  • ROM / RAM: 16 GB + 2GB LPDDR3
  • Network: 100 Mbit / s Ethernet, WIFI 802.11 b / g / n
  • Video output : HDMI 2.1 to 4K at 75 Hz with HDR, AV-port 3.5mm (composite).
  • Audio: analog stereo audio through the AV-port digital audio via HDMI and optical S / PDIF
  • USB: USB 3,0x1, USB 2,0x1
  • Nutrition: 5V / 2A
  • Miscellanea: IR port for the external receiver and a slot for microSD memory cards
new revision
  • OS: Android 8.1 | Android 9.0
  • CPU: Amlogic S905X2 quad-core Cortex A53 to 2 GHz
  • GPU: Mali-G31 MP2 Dvalin
  • ROM / RAM: 32/64 GB + 4GB LPDDR3
  • Network: Gigabit Ethernet, WIFI 802.11 b / g / n / ac, Bluetooth 4.0
  • Video output : HDMI 2.1 to 4K at 75 Hz with HDR, AV-port 3.5mm (composite).
  • Audio: analog stereo audio through the AV-port digital audio via HDMI and optical S / PDIF
  • USB: USB 3,0x1, USB 2,0x1
  • Nutrition: 5V / 2A
  • Miscellanea: IR port for the external receiver and a slot for microSD memory cards
A photo
Attached Image
Attached Image
Attached Image
Attached Image
How to determine the audit?
Reveals the console and see the markings on the board next to the CPU.
Example.

The old revision with 2GB RAM
Q5X2 V1.0 18482
Q5X2 V1.5 19023
Q5X2 V2.0 18375
Q5X2 V4.0 18472

The old revision with 4GB of RAM
Q5X2 V3.0 18395
Q5X2 V5.0 18483
Q5X2 V5.5 19015
Q5X2 V7.0 19133

The new revision with 4 GB of RAM
Q5X2 LP3 19215
Firmware
Linux
PC software


Recovery
Instructions
Useful


Polls
Attached Image


Before asking a question in the subject line, please use the search engine!
Attached Image


filling cap proposals sent to QMS

Post has been editedCuphead - Yesterday 12:24
Reason for editing: TWRP 3.3.1-0 OFFICIAL



Rep: (338)
* volchOk,
First put on 10, and now 14, flew.



Rep: (53)
Cuphead @ 01/15/19, 4:28*
On the drain, the new OTA flew in on January 10th.

Here's what's new after installing what from January 14:
Attached Image


Post has been editedagranbox - 15.01.19, 06:11



Rep: (74)
zayats3 @ 15.01.2019, 00:53*
...
and analog, and other model ..)) are two different consoles, from X96 Max firmware can not be put on the H96 Max.

You do not say, SW. "Expert", stands in my boxing. X96 firmware h96 for a couple of days and do not know the problems, though it is worth mentioning that my boxing 2/16, 100 network and wifi 2.4



Rep: (33)
The question came prefix with the stock control. Prompt, the better to manage it? Air mouse, Klava with the touchpad, or simply attach a usb mouse? Have a headset with a microphone, so you can try it and like an ordinary wireless mouse?



Rep: (11)
* nicodimus1973, nothing is more convenient than conventional wireless mouse is not desirable battery, so as not to be fooled with batteries.
For example, such
usb rechargeable wireless mouse 2400 dots / inch internal battery
https://aliexpress.com/item/-/32700090015.html

Post has been editedfontan83 - 15.01.19, 07:53



Rep: (4)
agranbox @ 15.01.19, 5:05*
Here's what's new after installing what from January 14:

And I did not flew. Also drain. please tell me what to click



Rep: (0)
* lama_alex Thanks for the answer. That's how it was. Updates take out hats. I was sure that everything is checked.



Rep: (9)
* koss7777 ,
It is through the bootloader or apply update from exp? Give, pzhsta, a link to the video.

Post has been editedtipanic - 15.01.19, 09:22
Reason for editing: Supplement



Rep: (25)
After updating to 01.14 on the date the image was then disappear, then appear. Restart to reboot cyclical. 15 times with only progruz. And frequency limited in kernel from 1.9 to 1.8



Rep: (518)
maximelson @ 15.01.2019, 01:31*
And from under Ubuntu can be both something to ask? Windows are long gone.

a) there is a certain samopal working on USB burning tool protocol under linux, but I did not really wound up - is not detected USB cable to the console, more precisely detected times out of ten. Most likely, the "incompatibility" computer and set-top box, and many on Windows is the same.
https: //forum.freaktab...logic-usb-burning-tool
b) So that the firmware has to brush away the dust from old netbook with Wendy more XP. And then detected with a probability of 50-70%, but it is bearable.
c) Is there a way to convert the firmware from the format for UBT to format the SD card, it is somehow easy to do it, but I did not understand how. The UBT is a function of "write the firmware to the SD card", but in the wine, most likely, will not work under Dev must. We will just ship with button pressed and card inserted. But this method works even if the bootloader live and on usb lace-top box can be removed from any position (circuit board from the bottom two pins).
---
Hmm, and then I thought - by closing the processor simply loads another copy of the boot loader, not a flush. Maybe she and the card will be able to sew? We will have to try at your leisure.

Post has been editedanpaza - 15.01.19, 09:29



Rep: (518)
fontan83 @ 15.01.2019, 07:48*
nothing is more convenient than conventional wireless mouse is not present,

ordinary mouse can not be used while lying on the couch and scratching his belly. This is not a personal computer on a table, on which it is convenient vozyukat. Aeromysh, although it is not as accurate, it can be used even while standing on his head.
It is clear that everyone has their own preferences. But I have a mouse and Claudia do not like, though, and tried. A matter of habit, in general, and the habit is possible and develop.

Post has been editedanpaza - 15.01.19, 09:25



Rep: (413)
anpaza @ 15.01.19, 09:14*
there is a certain samopal

This is why samopal? -tyts



Rep: (295)
* anpaza
Hmm, and then I thought - by closing the processor simply loads another copy of the boot loader, not a flush. Maybe she and the card will be able to sew? We will have to try at your leisure.

This method sewed bd player. Firmware on yusb memory stick, food, pause 1-2 sec (peripheral initialization - spun drive, etc.), circuit, flash drive blinked - opening and the process has begun ... The challenge was to "seize the moment" to flush circuit. This method is for the database player was, we got on the other, close to the power supply is necessary, but not the essence ...



Rep: (172)
tipanic @ 15.01.2019, 09:09*
* koss7777 ,
It is through the bootloader or apply update from exp? Give, pzhsta, a link to the video.

Here is the link to take a file and, if you have not set up smooth video.
X96Max (S905X2) [Android] (Post koss7777 # 81094303)
The file has the letters ota, on the Google Drive folder "Stock firmware"
Night released a new firmware update, I still have not tested it, so long as there is not the last video

Post has been editedkoss7777 - 15.01.19, 10:01



Rep: (413)
Not a big manual in pictures how to make a bootable SD card to flash from it
Start the Burn Card Maker
1. Notes all the checkboxes where there is no
2. Select your SD card
3. Select a firmware
Attached Image


Make click and agree that all data will be destroyed
Attached Image


In the resulting window, click "Start", wait until the end when formatting and close the window
Attached Image


This starts up the firmware and other files on the SD card, wait for the end
Attached Image


Click OK, close the application, take out the card.
Attached Image


Now, insert the card in the box, hold reset and powered.
If everything is successful, it will flash process.


anpaza @ 15.01.19, 09:14*
The UBT is a function of "write the firmware to the SD card"

Yes like there is no such function
anpaza @ 15.01.19, 09:14*
But this method works if at least loader alive

This method works even if there is no boot loader. But if he stayed, but not the work, in any case, close the "penny"

The method of flashing with SD card on the principle is the same as through the cord.
When the firmware is loaded via a cord uboot.usb, when firmware via SD card is used u-boot.bin.sd.bin
When you create a bootable SD card usedAttached fileBurn_Card_Maker.zip(1.21 MB)

orAttached fileBurn_Card_Maker_202.zip(2.08 MB)

Two areas are created on the map. 1-16mb for u-boot.bin.sd.bin, 2-fat partition
In the first area, u-boot.bin.sd.bin is sewn as
dd if = u-boot.bin.sd.bin of = / dev / sdb conv = fsync, notrunc bs = 1 count = 444
dd if = u-boot.bin.sd.bin of = / dev / sdb conv = fsync, notrunc bs = 512 skip = 1 seek = 1

The fat profile is copied to the firmware in img format ini file aml_sdc_burn.ini
where its variables actually like UBT
[common]
erase_bootloader = 1<----- wash yubut
erase_flash = 1<------ format flash
reboot = 0<------ is not to restart after the
; Package will filled by sdacard burning tool
[Burn_ex]
package = update.img<------ firmware name
; Media =


If yubut lively and pressed a reset button that launches the SD card with proshivalschika
read ini file, if there erase_bootloader, it erases it, restart the box and because yubuta in the internal memory is then loaded with yubut sd card and sewn on.

ZY I hope nothing is messed up
Zzy For sozadniya from under Linux - smallmanualThe only thing that you need to pull the firmware from img u-boot.bin.sd.bin
Picture


Post has been editedsurkov.alex - 27.01.19, 20:01
Reason for editing: In the Hat



Rep: (98)
maximelson @ 15.01.19, 01:31*
And from under Ubuntu can be both something to ask? Windows are long gone.


Somehow, too, I was interested in the matter, but then no answer. I found out how to sew TV box. To make a bootable USB flash drive with the so-calledWindows XP x86 Universal USB Virtual. Orthis system.
In this release, we implemented the ability to work from a removable storage device (USB flash disk, USB HDD) on any computer, regardless of the type of processor. The result is a versatile operating system that can be worn on a flash drive or removable hard drive with a USB interface and run on almost any computer, regardless of its hardware structure.


The system is loaded directly from the stick. And there it is possible to sew quietly through UBT. I beg the first time.

Post has been editedRomarik.by - 15.01.19, 10:35



Rep: (33)
anpaza @ 15.01.19, 10:24*
It is clear that everyone has their own preferences.
you need for the kitchen TV set



Rep: (9)
* koss7777 ,
HOW TO RESET X 96 MAX THROUGH SD CARD
1. Download the zip-file firmware to the root of sd-card fat 32 format.
2. Insert the card into the STB.
3. Enter the rekaveri mode using the reset button in the av-nest (for this off on the network TV box press the reset button and holding the button does not release the button to turn on the TV box to the network.! Rekaveri 10-20 seconds and turn on. release the button.)
4. Using the remote consoles, select the item APPLY UPDATE FROM EXT.
5. Select the item UPDATE FROM SD CARD.
6. Choose our downloaded file.
7. After flashing select REBOOT SYSTEM NOW.
Firmware finished!
Picture


Post has been editedVasily_5 - 15.01.19, 19:03
Reason for editing: SHAPE



Rep: (9)
* koss7777 ,
ATP successfully reflash!



Rep: (172)
* tipanic,
excellent, someone in the comments below the video just had to be like that, I will write them, how to detail :)


Full version    

Help     rules

Time is now: 01/06/20, 05:07