X96Max (S905X2) [Android] | [Media console]
under the messages to which you want to add links. tim0161 @ 15.04.20, 21:36
F_L, ATV purely for our set-top box is not
F_L @ 16.04.20, 18:12
Yes, but not this, "manufacturer"
... install the update and will from this manufacturer
Attached images
 |
 |
 |
100 pounds @ 16/04/20, 18:12
Well Run, tell me where to look for compiling the driver under your gamepad?
And what does "run"?
To start, you need to specify the device id of your gamepad.
At the forum there is a special theme of "plant" gamepads -Native support for input devices | Native support for input devices in Android with their own hands
There is, of course, not about the compilation, but may find the desired module / config for your gamepad.
tim0161, You put on H96mah ATV firmware of Slim House (SLIMBOX ATV OTA by SlimHouse Android 9)? Everything works fine? I somehow did not adjust the screen size! I like this flash, it is on my boxing X96 plus max. Post has been editedalvas94 - 16.04.20, 20:00
tim0161, That is, you are on Maud firmware-based flow for the previous revision (4GB) from Cuphead moved onto ATV firmware of Slim House (SLIMBOX ATV OTA by SlimHouse Android 9)? : Dbaltik_lex @ 16.04.20, 20:18
where to run ?
try it hereX96Max (S905X2) [Android] (Post Cakypa23 # 95305970)
tim0161 @ 16.04.20, 19:35
... install the update and will from this manufacturer
alvas94, Judging by the screenshots - yes! Here I ask how he did it :)
Post has been editedF_L - 17.04.20, 16:48
f_L, By advice tim016 He flashed his boxing X96 max 4 / 32GB Maud firmware-based flow for the previous revision (4GB) from Cuphead and it already freewheeling firmware SLIMBOX X3 ATV and AOSP by SlimHouse version 2.1 Android 9 and now I test-like while OK! : DAlexey.Kondratiev @ 19.03.20, 15:54
I will ask a question and can not find answers.
I registered a trial subscription to IVI, to see if it will work 5.1 sound (used before self-assembling player on the basis of raspberries and kodi, but tech support IVI said that sound 5.1 + Malinke Cody did not get)
In general, after connecting x96max - exactly the same rake, 5.1 sound in films by ivi - No (although in the properties of the film is written 5.1, receiver comes flow 2.0, tried, and optics and hdmi)
When this box is perfectly displays the flow of 5.1 to the receiver, if you include movie playback from a local drive through Cody (no ivi).
The technical support at this time was told that maybe I have not \ not included AC3 codec support.
Maybe someone will tell you how to add the correct codec or he may already have and what you want to include the artful setting?
I registered a trial subscription to IVI, to see if it will work 5.1 sound (used before self-assembling player on the basis of raspberries and kodi, but tech support IVI said that sound 5.1 + Malinke Cody did not get)
In general, after connecting x96max - exactly the same rake, 5.1 sound in films by ivi - No (although in the properties of the film is written 5.1, receiver comes flow 2.0, tried, and optics and hdmi)
When this box is perfectly displays the flow of 5.1 to the receiver, if you include movie playback from a local drive through Cody (no ivi).
The technical support at this time was told that maybe I have not \ not included AC3 codec support.
Maybe someone will tell you how to add the correct codec or he may already have and what you want to include the artful setting?
Good day!
I have the same question! Join now!
Ivi is also applied to the support, but really can not say anything. I can say: ivi claimed in 5.1 sound is. Similarly, 100% I have a smart TV Samsung. There ivi perfectly gives 5.1 in the content in which the icon is displayed 5.1.
In our set-top box can not achieve this.
If you have found the solution, please help.
baltik_lex @ 17.04.20, 17:16
And not those 2 contacts have
No need to blame Vasily_5 he have the right contacts .. For this purpose, a specially made these copper pad. The fact is that enterprising Chinese sometimes soldered one resistor and therefore the closure of the copper areas does not lead to the expected result. I suggested to you how to get around this simple problem. This has already been written or a dozen times.
Post has been editedCakypa23 - 17.04.20, 19:25
alvas94 @ 17.04.20, 17:52
and it already freewheeling firmware SLIMBOX X3 ATV and AOSP by SlimHouse version 2.1 Android 9
alvas94, I have laid out an update for the processor to an older revision 905H2 ,those. you need to install SLIMBOX X2 ATV and AOSP
Post has been editedtim0161 - 17.04.20, 19:24
dimitriz / 1 @ 04/17/20, 19:53
Also flashed slimbox x3 ATV 2.1, first events of Cuphead. Boxing Revision old.
dimitriz / 1 @ 04/18/20, 18:07
Yes. The remote does not know I have a G30.
So find out what your console. And in general, to whom you write? What is it?
zaglog, Yes, it works! But no longer connected on bluetooth headsets, smart ... He returned to the firmware of theRequeLine ATV Android 9. the old and the new audit, as well as 2/16! Sorry ... o.O
Post has been editedalvas94 - 18.04.20, 12:07
And it is possible to duplicate the screen with consoles on other smart TV that is connected to the same network?
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement