Connected to x98 directly


Post has been editedBengun - 29.12.19, 20:44

Okay. I understood.
Full confidence what category cable I do not have. It just strained that the laptop and the prefix show different port speed on the same cable.

quency,
Connect the prefix to the laptop directly preferably a short cable, and look at the properties of the network laptop the speed of the connect.
Then you will seek the reason why it does not go 1Gbit on the router.
The gigabit network is quite sensitive to the quality of the components.
After breaking the console, you can visually determine which networks in it is installed.
100m connected to the transformer only 4 RG45 contacts. For 1GB, all 8 pins are connected.
You can check without disassembly to check the usual multimeter tester.
Something like this.

Post has been editedBengun - 29.12.19, 21:52

Good day to all!
I will be glad to help on the following question
I am trying to install on the X96MAX PS4 Remote Play.
After installation, the application writes an error code 88001003 (related to the presence of root rights on the device). On the phone Xiaomi Mi6, this problem was overcome by hiding the root through Magisk Manager.
But then the same way did not work - I checked on the assembly No. 2 from the header (firmware from 2018.11.28) and on the stock firmware 2019.03.02.
So I would like to know if there are firmware on our device without root access either there is any more reliable way to hide the installed root?
X96max 4/64, old revision

manja1991 , Thank you! I will try.

Iopiopiop1234 , Good evening! We put the TRWP hinged from the header, by mounting the System, through the conductor go to the System / Xbin and delete the SU binary (it is better to just cut to throw on the SD card). Reload and root will disappear. If the root is needed, move back and put the resolution 6775, reboot and root on the spot. I do it myself so that Wink has not seen root, and then many channels do not work. Yes, I have a new revision, it works on the old one did not check, but should. Do not forget, after removing the root, we get to recovery
Only through the match in the AV mode.

Post has been editedOlegS4 - 29.12.19, 22:35

Although this post is about S509x3, but also for S905x2 it is relevant. Everything is checked by me, the working method.


You can in the cap.

Tell me please, why my X96 MAX is not flashingthisAnd other custom firmware (tried several)?
Somewhere 3% freezes, waits and then gives an error. Is this my prefix inappropriate or do I do something wrong?
Stock Focus in IMG format is normal.

On AOS 9-ke, everything works as well. I wrote about Atv-firmware. We need a tambourine there

If anyone knows which program correctly shows the temperature and loading of Proceas: monitoring the resources of the pro or Cool Tool. The second shows 2-4 times less download.

Posted on 12/30/2019, 00:10:

I reflash for 9 android and decided to check the test that showed under 70,000 antute. It used to be about 600,000 on the old firmware. It turns out that the old processor is equal to the new one.

Hello. How to put 3D wallpaper on the screensaver. In the "Screensaver" point there is no specific application?

It would be necessary to check too, at least just to reduce the frequency to 1700mhz, I also have the trollet prefix wild. Although in my case, it is possible that I have not replaced the regular BP, which I never replaced, although many advised here. I only remembered the tension, it gives 5,31V without load. Although it can under load and deals, if so is normal. If it does not see it, it is probably a bit too much. Although in the idea of ​​the console, there must still be a voltage stabilizer that reduces to the required value.

Post has been editedAL22 - 30.12.19, 02:13

Klalnavas , After changing the regulator, the program can be deleted?

No. It is like a script in autoload from under root. After the reboot, the installations of the program are applied. You will delete - and everything will disappear :)

the old

Post has been editedFog07 - 30.12.19, 11:45

az020784z Most likely trying on Android 8.1 to roll up the update from Android 9, this is not put on this.

[QUOTE NAME = "AL_3755" DATE = "12/23/19, 04:01" POST = 92160366]
All newcomers who are unreasonable, doubting!
Current software on 21-22.12.2019
At the end of the year, the update will be rated for 2-3 per week.
So that this link live for long.
What you can update.
Everything works, but could miss.
On setting up applicationssavagemessiahzine.comWe are looking for.

https://cloud.mail.ru/public/5umu/ajaev9BYA.

I have a firmware stock version Android 8.1.0
[/


Complemented. Partially updated.



Post has been editedAl_3755 - 30.12.19, 13:58

Can I link to AOSP 9 on an old ventilation box?

Post has been editedApmypN - 30.12.19, 15:40

Today I will try.