X96Max (S905X2) [Android] | [Media console]
Guys !!! Who will understand from the outside Claudia on this [censored] box ??? Edit config Claudia does not help, ENTER is pressed the symbol, which is a pointer to a virtual Claudia ... :(
Posted on 16/10/2019, 14:33:
Everything works except for the outer Claudia. Yes, an Internet or wi-fi or cable. At all.
Posted on 16/10/2019, 14:33:
boss5555 @ 16.10.19, 14:31
Watch work?
Everything works except for the outer Claudia. Yes, an Internet or wi-fi or cable. At all.
Aquastas @ 16.10.19, 14:32
Everything works except for the outer Claudia. Yes
She ATV or normal android?
Aquastas, The only way I managed to get a fully working "iron" keyboard (operating as they should) to "freeze" in the same titanium virtual keyboard easy eГ« off does not solve the problem with Press enter to, bud its key code is still intercepted the virtual keyboard. Yes, the method is not suitable for those who use, even occasionally, but set with the remote without a voice. Perhaps the problem can be solved and reusing / other versions of the virtual keyboard, not tested. Since boxing is always a mini-keyboard is connected.
Post has been editedtalraash - 16.10.19, 16:01
RequeLine @ 15.10.19, 23:10
an old revision of prezhdnemu not working bluetooth
Hmm, but he is not used to work? Transfer of blyutuzu I have never worked in a drain, not on ATV, despite the fact that the device on which / from which a file is found mediaboksom ...
Post has been editedserge_kononoff - 16.10.19, 16:23
serge_kononoff @ 16.10.19, 16:23
Hmm, but he is not used to work? Transfer of blyutuzu I have never worked in a drain, not on ATV, despite the fact that the device on which / from which a file is found mediaboksom ...
I have a bluetooth works. Stoke March.
talraash @ 16.10.19, 16:00
"Freeze" in the same titanium virtual keyboard
And DosBokse will work? You can potestit? And another thing: where to find? What is it called? Freeze AOSP (android keyboard) cut off external Claudia, freezing "input device" made the same.
Post has been editedAquastas - 16.10.19, 17:51
Aquastas, What immeno in dosbox? enter?https://imgur.com/Tr94zhOSo why would it not work? Physical keyboard will work virutalnoy will not as a class. I have never worked globally enter, especially uncomfortable in the browser, it was necessary to choose the virtual keyboard and enter prozhimat. Now globally everywhere working in the system, the keyboard remains external keyboard helper and how and how VIRTUAL fizcheskaya (possible through other software, a matter of taste. But the software should be pre-installed and configured before you cut out the default keyboard).
Post has been editedtalraash - 16.10.19, 17:55
talraash @ 16.10.19, 17:48
So why would it not work?
Although the video shoot. All the buttons work, enteritis - NO !!! Maybe in the settings dosboksa dig deeper? Or Throw your config ...
Aquastas, And where does the dosbox settings? Global software incorrectly works with a physical keyboard. As he wrote, perhaps a version of the same rannii aosp klavatury from google will korektno work, not tested. But because staff resources virualnymi keyboard can not be disabled, only remove eГ« appearance on the screen and the app has to "freeze" or delete.
Completely assembled stock universal backupBeelink,onold and newrevision 4/32 ANDROID 9, as well as a 2/16!
WHAT where he took
The system of the latter, the latest official firmwareBeelink GT1_Mini , I took here: ===>>
On the basis of our latest official firmware Android drain 9X96max 8.1-9.0_ V311P_20190722 (for older revisions) took here X96Max (S905X2) [Android] (Post Sergey591983 # 88060309)
ANDX96Max_V311R_P_20190926-1519 (FOR NEW AUDIT) here X96Max (S905X2) [Android] (Post upravdom # 88436244)
Thanks for the idea SW. mugik04 Because on his tip-off the first time I put the firmware on Beelink, and most importantly, for providing rekaveri!
On the basis of our latest official firmware Android drain 9X96max 8.1-9.0_ V311P_20190722 (for older revisions) took here X96Max (S905X2) [Android] (Post Sergey591983 # 88060309)
ANDX96Max_V311R_P_20190926-1519 (FOR NEW AUDIT) here X96Max (S905X2) [Android] (Post upravdom # 88436244)
Thanks for the idea SW. mugik04 Because on his tip-off the first time I put the firmware on Beelink, and most importantly, for providing rekaveri!
What and how .
there is
- blind,
- the status bar,
- notification
- navigation bar,
- a full-fledged market
- Watch the console, everything works.
- involved bluetooth
- Delivered complete Ruth . For patched SuperSU, which no longer needs to be updated, thanks Uv. anpaza
- Added program "Shutdown Scheduled"
- Make voice search program , the search itself has appointed a long press of a button "House / home" , In the navigation pane.
there is
- blind,
- the status bar,
- notification
- navigation bar,
- a full-fledged market
- Watch the console, everything works.
- involved bluetooth
- Delivered complete Ruth . For patched SuperSU, which no longer needs to be updated, thanks Uv. anpaza
- Added program "Shutdown Scheduled"
- Make voice search program , the search itself has appointed a long press of a button "House / home" , In the navigation pane.
How to set, write in detail:
For the previous revision
InstructionFor older revision And he backups
Many words if not frightening, but fewer questions.
You need to download:
Stock firmware revision for the old here: X96Max8.1-9.0_V311P_20190722 , X96Max (S905X2) [Android] (Post Sergey591983 # 88060309)
RekaevriTWRP_322.zip ( here: X96Max (S905X2) [Android] (Post mugik04 # 89803865) or in the cap (throw the stick or card sd)
Sam backups later in the post, which should be unpacked and put on the sd card or USB flash drive, the path TWRP \ BACKUPS \ 1234567890 \ X96Max_Bil_Req_7
NeedAmlogic USB Burning Tool (Post zgenia44 # 89418469). It must therefore set.
1 Standard sews our official firmware X96Max8.1-9.0_V311P_20190722 (at an older revision) or X96Max_V311R_P_20190926-1519 (a new revision), referred to above, using USB_Burning_Tool_v2.1.7.3., Boot
2 Go to the rekaveri TWRP_322.zip (through stock rekaveri-apply updates from ext-way to a flash drive or sd card), install the System section, and remove the checkbox "read only".
3 Go to the Restore (restore), we choose our backup (set the path to the sd card or USB flash drive), put the check ONLYsystem, data and sewn (slider to the right).
PS Who sits on and so these drain firmware, you can start from step в„–2
DOWNLOAD:
MD5- 251979DA356BE31CC11BB0C6AB62AE32
MEGA
https://mega.nz/#!b0M0...3iwWCF--duxq86cdixxp3s
You need to download:
Stock firmware revision for the old here: X96Max8.1-9.0_V311P_20190722 , X96Max (S905X2) [Android] (Post Sergey591983 # 88060309)
RekaevriTWRP_322.zip ( here: X96Max (S905X2) [Android] (Post mugik04 # 89803865) or in the cap (throw the stick or card sd)
Sam backups later in the post, which should be unpacked and put on the sd card or USB flash drive, the path TWRP \ BACKUPS \ 1234567890 \ X96Max_Bil_Req_7
NeedAmlogic USB Burning Tool (Post zgenia44 # 89418469). It must therefore set.
1 Standard sews our official firmware X96Max8.1-9.0_V311P_20190722 (at an older revision) or X96Max_V311R_P_20190926-1519 (a new revision), referred to above, using USB_Burning_Tool_v2.1.7.3., Boot
2 Go to the rekaveri TWRP_322.zip (through stock rekaveri-apply updates from ext-way to a flash drive or sd card), install the System section, and remove the checkbox "read only".
3 Go to the Restore (restore), we choose our backup (set the path to the sd card or USB flash drive), put the check ONLYsystem, data and sewn (slider to the right).
PS Who sits on and so these drain firmware, you can start from step в„–2
DOWNLOAD:
MD5- 251979DA356BE31CC11BB0C6AB62AE32
MEGA
https://mega.nz/#!b0M0...3iwWCF--duxq86cdixxp3s
For the new revision
Instructions fornew revisionAnd he backups
Many words if not frightening, but fewer questions.
You need to download:
Stock firmware to the new revisionX96Max_V311R_P_20190926-1519 here X96Max (S905X2) [Android] (Post upravdom # 88436244)
RekaevriTWRP_322.zip ( here: X96Max (S905X2) [Android] (Post mugik04 # 89803865) or in the cap, and there rekaveri TWRP2.IMG (Sd throw on the card or stick)
Sam backups later in the post, which should be unpacked and placed on a flash drive or sd card, whichever you. by the wayTWRP \ BACKUPS \ 1234567890 \ X96Max_Bil_NEW_Req_7
NeedAmlogic USB Burning Tool (Post zgenia44 # 89418469). It must therefore set.
1 is sewn official standard firmware X96Max_V311R_P_20190926-1519 (a new revision), cited above, using USB_Burning_Tool_v2.1.7.3., Boot
2 Go to the rekaveri TWRP_322.zip (through stock rekaveri-apply updates from ext-way to a flash drive or sd card), install the System section, and remove the checkbox "read only".
3 Go to the point of Install - install image (below right) - indicate your sd card and select where TWRP2.IMG, put the check on the Recovery and reaffirm the slider to the right.
4 Use the top right back to the main section, - Reboot- Recovery, thus loaded in a new rekaveri 3331.
5 Check the Vendor mount partitions. System. Data, put the check in the MOUNT section
6 Go to the Restore (restore), we choose our backup (set the path to the sd card or USB flash drive), set dawsystem, data, vendor and sewn (slider to the right).
PS Who and so sits on the listed drain flashing, you can start from step в„–2
Download:
MD5- 8911FC3FEFE6045B7E9ACB436E4D900D
MEGA
https://mega.nz/#!Sh9n...fOXaoj9MQniqEsTG2TL3WM
You need to download:
Stock firmware to the new revisionX96Max_V311R_P_20190926-1519 here X96Max (S905X2) [Android] (Post upravdom # 88436244)
RekaevriTWRP_322.zip ( here: X96Max (S905X2) [Android] (Post mugik04 # 89803865) or in the cap, and there rekaveri TWRP2.IMG (Sd throw on the card or stick)
Sam backups later in the post, which should be unpacked and placed on a flash drive or sd card, whichever you. by the wayTWRP \ BACKUPS \ 1234567890 \ X96Max_Bil_NEW_Req_7
NeedAmlogic USB Burning Tool (Post zgenia44 # 89418469). It must therefore set.
1 is sewn official standard firmware X96Max_V311R_P_20190926-1519 (a new revision), cited above, using USB_Burning_Tool_v2.1.7.3., Boot
2 Go to the rekaveri TWRP_322.zip (through stock rekaveri-apply updates from ext-way to a flash drive or sd card), install the System section, and remove the checkbox "read only".
3 Go to the point of Install - install image (below right) - indicate your sd card and select where TWRP2.IMG, put the check on the Recovery and reaffirm the slider to the right.
4 Use the top right back to the main section, - Reboot- Recovery, thus loaded in a new rekaveri 3331.
5 Check the Vendor mount partitions. System. Data, put the check in the MOUNT section
6 Go to the Restore (restore), we choose our backup (set the path to the sd card or USB flash drive), set dawsystem, data, vendor and sewn (slider to the right).
PS Who and so sits on the listed drain flashing, you can start from step в„–2
Download:
MD5- 8911FC3FEFE6045B7E9ACB436E4D900D
MEGA
https://mega.nz/#!Sh9n...fOXaoj9MQniqEsTG2TL3WM
For testing and validating the backup to the new revision, thanks to ourSW. And_rjy
How to bet on 2/16 read here ==> , but put a backup the previous revision.
For experiments with 2/16 thanks to Uwe.Qwerty3001
============================================
LOOKING
 |
 |
 |
 |
 |
 |
 |
RECOVERY
 |
 |
 |
 |
 |
PS
If the update arrives, do not update! I myself do an update.
ARCHIVE OLD VERSION
Old revisions:
Yandex:
https://yadi.sk/d/DFcVD87ceHJUSA
MD5: 48DF4B8D11413A2D00E9E5B01F713CCA
The new revision:
MD5 - EFB7E1F1BA3C7AE80281A4090707986E
Yandex
https://yadi.sk/d/gtxlp2WVoJJZHA
Yandex:
https://yadi.sk/d/DFcVD87ceHJUSA
MD5: 48DF4B8D11413A2D00E9E5B01F713CCA
The new revision:
MD5 - EFB7E1F1BA3C7AE80281A4090707986E
Yandex
https://yadi.sk/d/gtxlp2WVoJJZHA
======================================================================================
ULUCHSHALKI HERE===>>>>
- Disable shumodava
- WakeLock, if the box does not come out properly after sleep. pressing the "Believe"
- HD channels in IPTV . Who has problems on the channels in the IPTV, heavy streams to high bitrate
- Splitting the screen!
- Customizable screen saver!
Post has been editedRequeLine - 27.02.20, 15:47
Reason for editing: new version
Hello! In the settings screen has a dark theme but for some reason does not want to darken.
How to overcome it? Firmware runoff last revision. The previous was the same.
How to overcome it? Firmware runoff last revision. The previous was the same.
talraash @ 16.10.19, 18:04
the application has to "freeze" or delete.
Yes I agree with you a million per cent, only tkni, pliz, nose me what you want to freeze. Screenshot welcome and impunity will not.
Buratino Karlovich @ 16.10.19, 19:25
not easy to install TWRP and flash backup?
How do you install it, if you like on board android8? He did not deliver. Otherwise, for what man has done this kind of work?
X96Max (S905X2) [Android] (Post mugik04 # 89803865)
there are different structures
RequeLine @ 16.10.19, 19:40
android8? He did not put
X96Max (S905X2) [Android] (Post sasvlad # 80668754)
have firmware already installed tvrp, XTMOD like or
"People" firmware for Android TV X96 Max devices (Post sasvlad # 87697375)
Post has been editedBuratino Karlovich - 16.10.19, 19:50
maxvidstudio, Prompt, and how should it work here? Immediately I found. but I have not use division.
plusodin , Not only in the 2 gigs blyutuza version does not, and is very convenient thing, so not to disturb anyone, sit in the wireless headphones. Console rvbotaet already almost a year, it is a pity the author of popular firmware has not rolled out a new version, but also on the very, very old nedurno.i notice is true, Wi fi works just fine here
maxvidstudio, It does not work accurately
RequeLine @ 22.01.19, 20:18
How to turn on 2 the screen.
According to the application in the window, making a long tap on the top part of the application window and drag it to the side
According to the application in the window, making a long tap on the top part of the application window and drag it to the side
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement