X96Max (S905X2) [Android] | [Media console]
New poll. !!!
HDMI Worker or Burned Out.
I have a worker. [ 2526 ] ** [90,83%]
Burned out For no reason. [ 164 ] ** [5,9%]
Plugged in hot. [ 85 ] ** [3,06%]
What firmware is right for me.
Stock. [ 2028 ] ** [72,92%]
Beelink. [ 237 ] ** [8,52%]
Android ATV. [ 504 ] ** [18,12%]
Boxing version.
Version 2/16. [ 332 ] ** [11,94%]
Version 4/32. [ 1268 ] ** [45,6%]
Version 4/64. [ 1181 ] ** [42,47%]
Do I like Boxing.
Like. [ 2089 ] ** [75,12%]
I do not like [ 107 ] ** [3,85%]
So-so. [ 583 ] ** [20,96%]
Total votes: 2781
 



Rep: (3)
DiscussionX96Max (S905X2)
Tv box
Discussion » | Marriage and Repair » | Folk "firmware for Android TV consoles X96 Max »
Specifications
Complete list of all audits

CPU - Amlogic S905X2 quad-core Cortex A53 processor up to 2 GHz
GPU - ARM Dvalin MP2 GPU
Memory - LPDDR4: / 4 GB LPDDR3: / 2 GB
Flash - EMMC: 16 GB No BT4.0 2 / 16g, 2.4 GHz WiFi RJ45 ethernet 10/100 port
Flash - EMMC: / 32 GB / 64 GB 4 / 32g and 4 / 64g Wi-Fi 2.4 and 5 GHz + BT4.0 RJ45 ethernet port 10/100/1000
Wi-Fi - IEEE 802.11 b / g / n / ac, 2.4g Wifi or 2.4 g and 5.8 GHz Wi-Fi
Bluetooth - BT 4.x + HS; Voice console support
I / o
1 * HD - HD 2.1, support HD CEC, dynamic HDR and HDCP 2.2, 4 K x 2 K 75 Maximum resolution output.
1 * AV - 480i / 576i standard definition
2 * USB - 1x USB 3.0, 1x USB 2.0
1 * IR - Remote connection receiver
1 * RJ45 - Ethernet interface, support 10/100/1000 m
1 * TF card - Support 4 GB / 8 GB / 16 GB / 32 GB / 64 GB
Power - DC 5 V / 2A; LED indicator, Work: blue; Standby: red
OS - Android 8.1
Video
* Amlogic video engine (AVE) with dedicated hardware decoders and encoders
* Support multi-video decoder up to 4K x 2K 60fps + 1x1080 P 60fps
* Supports multiple “secured” video decryption sessions and simultaneous decoding and encoding
* Video / picture decoding
-VP9 profile-2 to 4 K x 2 K 60fps
-H.265 HEVC MP-10 L5.1 to 4 K x 2 K 60fps
-AVS2-P2 profile up to 4 K x 2 K 60fps
-H.264 AVC hp L5.1 to 4 K x 2 K 30fps
-H.264 MVC up to 1080p 60fps
-MPEG-4 ASP L5 up to 1080p 60fps (ISO-14496)
-WMV / VC-1 SP / MP / AP up to 1080p 60fps
-AVS-P16 (AVS +) / AVS-P2 JiZhun profile up to 1080 P 60fps
-MPEG-2 MP / HL up to 1080 P 60fps (ISO-13818)
-MPEG-1 MP / HL up to 1080 P 60fps (ISO-11172)
-RealVideo 8/9/10 to 1080 P 60fps
A photo
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image


Firmware
A selection of firmware (received from the seller)
https: //droidboxforums…-firmware-links.14717/
Message No. 2094, author A.S._id Archive of firmware For Box X96 MAX.
Mail.ru cloud
Google drive
Beelink GT1 MINI total firmware for the whole series 2/32 4/32 4/64
Perezalita on poison. "Mirrored" .img + ota-11/30/18
2019.02.23. For stock firmware version boxes 2/16 and 3-4 / 32-64
Firmware for 2g ram.
Firmware for 3-4g ram.
Build. Custom firmware.
Useful.
Scattering
For those who like and I did not know how to distinguish the new from the old revision:
Firmware instructions.
Recovery.

Afrd - This is Automatic Framerate Daemon
SuperSU for AndroidTV boxes
List of software problems with the X96 Max console and their solution
The most reliable way to check Root rights.
Instructions for setting up a regular remote.
Smart YouTube TV
Setting up a physical keyboard.
ADB through the local network.
Run the Auto Frame Rate in SPMC using a script.
The perfect bundle of SPMC + Amlogic + AFR, for film fans
Setting the Power button on the Vontar G10 remote
For Beelink firmware for remote control.
Post number 1822, by anpaza "Direct audio output 2.0-5.1 from Cody"
KODI MIRRORS All versions 15.0-18.0 + Repo all assemblies.
Alternative Core for X96 Max
The Reset button does not work after flashing a problem on Beelink.
Connect our box via AV connectors.
The method of flashing with SD card on the principle is the same as through the cord.
Launcher Bilink (Lighthome) in Russian
Made a small mod launcher Lighthome 1.1.4
INSTRUCTIONS FOR DISPLAYING STARTED APPLICATIONS AND THEIR DELETION ON STOCK
Another instruction Recently launched applications on X96 Max
A small patch, for STOCK firmware, as a double tap, call the "Recent" menu
Multi-window mode.
Mbox Launcher v2
More Launcher on the usertalory
X96Max (S905X2) [Android] (Post talory # 89654584)
X-Plore Transfer files from one device to another.
Instructions for optimal operation of the PRA on the S905X2
No Ads on YouTube.
Bars in the firmware Android 9: img x96Max_311_P_20190722 for the previous revision 4/32
Correct Root on the new-old revision, android 9. SuperSU.apk, SU binary and 99SuperSUDaemon,
Miracast ported under the old revisions with the stock vendor 9th android.
How to Install a samba server on the console
To help the user of choice.

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonPictureunder the messages to which you want to add links.
If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).


Post has been editedmihadom - 15.03.20, 11:36
Reason for editing: Improvements to stock firmware 9ki



Rep: (249)
* vova0502 , Look inexpensive on the number of purchases and a good rule otzyvam.kak quality and price does not correlate with the cables, low-cost cable exactly how expensive



Rep: (178)
vova0502 @ 24.07.19, 22:09*
Advise quality hdmi cable v2.0 with aliekspress.

Now look here:https: //ugreen.ru.alie...00002.2.39257fa4wKfcQd



Rep: (0)
Model x96max_v311_P VYa 4.9.113
Tell me, why aida64 = manufacturer should droidlogic, franklin board, and the purity of the range of 100-1800
When the photo other options?



Rep: (904)
wertolet77 @ 24.07.19, 20:27*
Tell me, why aida64

This question is here:
https://www.aida64.com/support



Rep: (2521)
wertolet77 @ 24.07.19, 21:27*
Model x96max_v311_P VYa 4.9.113
Tell me, why aida64 = manufacturer should droidlogic, franklin board, and the purity of the range of 100-1800
When other photo options

Because:
1. Ondroid P to x96 max, this is not the official of a test betka
2. franklin is the code name for amlogic s905x2 assemblies
3. Chinese molodsy quickly orient



Rep: (1)
diabolusss @ 24.07.19, 15:37*
Good afternoon, forum users. Recently I received this wonderful boxing and was happy with everything until the FOTA upgrade the software to the latest version ... 311_190302_1355. Before that ran Tspu_trottl, as surveys have met an interesting opinion that additional cooling provokes CPU throttling, and hoped to refute it ... But not in time, because after the second consecutive update found that:
1. The maximum frequency of the processor everywhere (Aida, system, etc.) is now less than 100 MHz, i.e. 1.8 GHz instead 1.9Ggts and therefore the best results in the test throttling is not about 45k, and 40k.
2. The last update brings stiffer throttling and now after a few minutes of operation frequency decreases steadily (without discontinuities) up to 80% of maximum. The temperature as above is less than 54 degrees on the passive cooling. The result is accordingly an average of 30fps, that is on the z28 Pro level.

Who can faced with such behavior? I understand now the only option is to rewrite a custom kernel (some recommend)? or the ability to roll back to a previous version without flashing? I want to make sure that I understand from reading on the forums: with the SD card, you can flash any custom kernel on this box !?


* lolas34,
It's not about parrots, and that the last upgrade is clearly lowered productivity consoles. And at the moment I am concerned it is a solution to this problem, but thank you for sharing your opinion.

And earlier voiced issues I want to add one more - Were you able to override the behavior of the basic hours of boxing? Those. what would you shutdown or sleep boxing clock continue to operate.

Post has been editeddiabolusss - 24.07.19, 22:16



Rep: (76)
* diabolusss,
dvfs amogic taxis on a separate module in the soc, which receives from the figures in proprietary binary file. So that only the downgrade will help ... But you uereny
proizvditelnosti in the fall? Another benchmark did not try?



Rep: (0)
Does not start Tricolor TV Online

x96 max 4/64, of the box, firmware sink is connected to a cable grid.

Uploaded by Tricolor TV Online (I subscribe to the cottage).

At start Tricolor outputs "Error 21" (there is no connection to the network).

In the setting grid Tricolor (nowhere else he will not allow) with the cable-existent. According vayfay hangs.

Thus Vink by cable runs.

Does anyone know how to fix this bug?

Thank.



Rep: (93)
* Huntvar , Ruth mb reaction.? Vink scrambled with unhidden Ruth also does not seem ..

Post has been editedItMan_75 - 25.07.19, 09:40



Rep: (9)
* Huntvar, by searching in the subject look about the flag, someone has written



Rep: (198)
* ItMan_75,
Vidoz on copyright: D



Rep: (198)
* ItMan_75,
This video is unavailable
This video contains content owned by the user to the UFC. He blocked their show in order to comply with copyright.



Rep: (198)
ItMan_75 @ 24/07/19, 23:45*
driven, not had time to disrupt it there .. works

There's no display. Cache cleaned, press Ctrl + F5))



Rep: (1)
talraash @ 24.07.19, 22:44*
dvfs amogic taxis on a separate module in the soc, which receives from the figures in proprietary binary file. So that only the downgrade will help ... But you uereny
in the fall of performance? Another benchmark did not try?

At the moment, I'm only in lowering the drain chvstoty with the original 1.9 GHz to 1.8 GHz and the hard throttling. In view of this, I have not watched benchmarks as they originally were not interested in me, but a couple of the standard drive out for greater certainty. With throttling all clear, but I do not understand why and for what purpose it was necessary to lower the base rate !? Or is it just a bug or my bad luck ... If custom firmware based on stock and include all of the factory upgrade, and do not understand anyone else is not affected?

Do I understand correctly that the downgrade is the same process of firmware only with a PC through usb male to male? Difficult to find the drain insertion in the cap for this box, you tell where to look?



Rep: (76)
* diabolusss,
Zaguglit about "amlogic fake frequency". That shows you that the monitoring software - parameters which "gives" the core. But as I wrote earlier, there is at least on amogic temperaura on the moon can be. Puts the frequency and voltage at soc separate chip, it takes a value from a binary file, i.e., it can only change yourself amlogic.
P.S. Nkakih changes in prozvodtelnosti in synthetics, is not observed.



Rep: (904)
diabolusss @ 24.07.19, 22:59*
Difficult to find the drain insertion in the cap for this box, you tell where to look?

You can then easily find:
https://chinagadgetsreviews.com/?s=X96Max



Rep: (1)
talraash @ 25.07.19, 00:08*
diabolusss,
Zaguglit about the "frequency and amlogic". That shows you that the monitoring software - parameters which "gives" the core. But as I wrote earlier, there is at least on amogic temperaura on the moon can be. Puts the frequency and voltage at soc separate chip, it takes a value from a binary file, i.e., it can only change yourself amogic.

Good and not so good. Zaguglit, but that's where to look? Indications from forum to forum and a review of the review vary, but between the two values ​​of 1.8 and 1.9. Tell me, please, a decision that is way to downgrade to the drain, and where to look for this stock. : Blush:

upd. ahead, thank you!

Post has been editeddiabolusss - 25.07.19, 00:18



Rep: (76)
* diabolusss,
I do not know how to write even more to understand ... That you see the value of the buyout in any program for the monitoring is not necessarily equal to the actual application value ... can flash the old firmware, but the more performance you get (except on the level of the previous build sofovom It worked better than the new one), but i test a few builds stkovyh difference in synthetics on the level of errors ...

Post has been editedtalraash - 25.07.19, 00:31



Rep: (27)
Cakypa23 @ 24.07.19, 20:00*
and it will Hadron Collider

then it android :)



Rep: (31)
Guys, all the greetings. I would like to clarify on the service life of our box. I read the forum - it turns a lot of marriage, or a lot of boxes sold, and turned to the forum only a part of who bought that have manifested glitches and breakdowns. Ordered this device, I wait. Judging by the next branch about similar devices, it is clear that things are not without sin. But here's a poll to spend when bought if it works, when broken down, it is out of order?


Full version    

Help     rules

Time is now: 10/04/20, 15:28