X96Max (S905X2) [Android] | [Media console]
New poll. !!!
HDMI Worker or Burned Out.
I have a worker. [ 1753 ] ** [90,83%]
Burned out For no reason. [ 117 ] ** [6,06%]
Plugged in hot. [ 55 ] ** [2,85%]
What firmware is right for me.
Stock. [ 1405 ] ** [72,8%]
Beelink. [ 187 ] ** [9,69%]
Android ATV. [ 328 ] ** [16,99%]
Boxing version.
Version 2/16. [ 232 ] ** [12,02%]
Version 4/32. [ 891 ] ** [46,17%]
Version 4/64. [ 807 ] ** [41,81%]
Do I like Boxing.
Like. [ 1458 ] ** [75,54%]
I do not like [ 82 ] ** [4,25%]
So-so. [ 388 ] ** [20,1%]
Total Votes: 1930

Rep: (3)
DiscussionX96Max (S905X2)
Tv box
Discussion » | Marriage and Repair » | Folk "firmware for Android TV consoles X96 Max »
CPU - Amlogic S905X2 quad-core Cortex A53 processor up to 2 GHz
GPU - ARM Dvalin MP2 GPU
Memory - LPDDR4: / 4 GB LPDDR3: / 2 GB
Flash - EMMC: 16 GB No BT4.0 2 / 16g, 2.4 GHz WiFi RJ45 ethernet 10/100 port
Flash - EMMC: / 32 GB / 64 GB 4 / 32g and 4 / 64g Wi-Fi 2.4 and 5 GHz + BT4.0 RJ45 ethernet port 10/100/1000
Wi-Fi - IEEE 802.11 b / g / n / ac, 2.4g Wifi or 2.4 g and 5.8 GHz Wi-Fi
Bluetooth - BT 4.x + HS; Voice console support
I / o
1 * HD - HD 2.1, support HD CEC, dynamic HDR and HDCP 2.2, 4 K x 2 K 75 Maximum resolution output.
1 * AV - 480i / 576i standard definition
2 * USB - 1x USB 3.0, 1x USB 2.0
1 * IR - Remote connection receiver
1 * RJ45 - Ethernet interface, support 10/100/1000 m
1 * TF card - Support 4 GB / 8 GB / 16 GB / 32 GB / 64 GB
Power - DC 5 V / 2A; LED indicator, Work: blue; Standby: red
OS - Android 8.1
* Amlogic video engine (AVE) with dedicated hardware decoders and encoders
* Support multi-video decoder up to 4K x 2K 60fps + 1x1080 P 60fps
* Supports multiple “secured” video decryption sessions and simultaneous decoding and encoding
* Video / picture decoding
-VP9 profile-2 to 4 K x 2 K 60fps
-H.265 HEVC MP-10 L5.1 to 4 K x 2 K 60fps
-AVS2-P2 profile up to 4 K x 2 K 60fps
-H.264 AVC hp L5.1 to 4 K x 2 K 30fps
-H.264 MVC up to 1080p 60fps
-MPEG-4 ASP L5 up to 1080p 60fps (ISO-14496)
-WMV / VC-1 SP / MP / AP up to 1080p 60fps
-AVS-P16 (AVS +) / AVS-P2 JiZhun profile up to 1080 P 60fps
-MPEG-2 MP / HL up to 1080 P 60fps (ISO-13818)
-MPEG-1 MP / HL up to 1080 P 60fps (ISO-11172)
-RealVideo 8/9/10 to 1080 P 60fps
A photo
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image

A selection of firmware (received from the seller)
https: //droidboxforums…-firmware-links.14717/
Message No. 2094, author A.S._id Archive of firmware For Box X96 MAX.
Mail.ru cloud
Google drive
Beelink GT1 MINI total firmware for the whole series 2/32 4/32 4/64
Perezalita on poison. "Mirrored" .img + ota-11/30/18
2019.02.23. For stock firmware version boxes 2/16 and 3-4 / 32-64
Firmware for 2g ram.
Firmware for 3-4g ram.

Build. Custom firmware.
Firmware instructions.

Afrd - This is Automatic Framerate Daemon
SuperSU for AndroidTV boxes
List of software problems with the X96 Max console and their solution
The most reliable way to check Root rights.
Instructions for setting up a regular remote.
Smart YouTube TV
Setting up a physical keyboard.
ADB through the local network.
Run the Auto Frame Rate in SPMC using a script.
The perfect bundle of SPMC + Amlogic + AFR, for film fans
Setting the Power button on the Vontar G10 remote
For Beelink firmware for remote control.
Post number 1822, by anpaza "Direct audio output 2.0-5.1 from Cody"
KODI MIRRORS All versions 15.0-18.0 + Repo all assemblies.
Alternative Core for X96 Max
The Reset button does not work after flashing a problem on Beelink.
Connect our box via AV connectors.
The method of flashing with SD card on the principle is the same as through the cord.
Launcher Bilink (Lighthome) in Russian
Made a small mod launcher Lighthome 1.1.4
Another instruction Recently launched applications on X96 Max
A small patch, for STOCK firmware, as a double tap, call the "Recent" menu
Multi-window mode.
Mbox Launcher v2
X-Plore Transfer files from one device to another.
Instructions for optimal operation of the PRA on the S905X2
No Ads on YouTube.

To help the user of choice.

Post has been editedVasily_5 - 30.08.19, 18:13
Reason for editing: A selection of firmware (received from the seller)

Rep: (-3)
Good afternoon. Prefix new memory 2/16, while viewing TV torrent, and generally when viewing video unit is heated to 70 degrees. Tell me this is normal, and what critical temperature for it? In youtube sing beautifully heated to a maximum of 60, but in fact that's how it turns out.

Rep: (17)
* Mixail071977 , Torrents give greater load. So standards. 70 is not scary.

Post has been editedtipitun - 18.07.19, 12:26

Rep: (6)
* Mixail071977,
Disassemble the console and remove bolt .... I have no bolt to 5-7 gr reduce the heat (2/16).

Post has been editedLIALAV - 18.07.19, 14:20

Rep: (-3)
* LIALAV , Tell me where and what a bolt. Photo can throw?

Rep: (74)
* Mixail071977, 70 degrees is the normal operating temperature, which does not require attention (which is at about 90 would be worth to think)

Where about 60 degrees say, there is talk about your modifications (2/16)?

Generally there are two points about the temperature
1) If the critical temperature of the device hangs
2) If the temperature is close to critical is happening processor frequency discharge (throttling), that is, the prefix should be slower (when viewing video content is generally not critical)

If you have not noticed neither the first nor the second point, it does not matter what the temperature of the work-top boxes. The temperature may be at least 100 degrees, more importantly to avoid the above two points.

Many write here hot or overheated console, nor is it has nothing to do with the set-top box. You need to talk, so if you work with consoles problems: freeze, brake, that's only if you need to look for the cause, one of the reasons is the temperature

Post has been editedPavelka - 18.07.19, 14:43

Rep: (15)
Mixail071977 @ 18.07.19, 16:21*
where and what kind of bolt

Carefully dissected prefix and there will see on the top cover.
Attached Image

Rep: (0)
* doom1980
And where to go for warranty case?

Rep: (49)
sergunokk @ 14.07.19, 00:28*
Did not check on the new firmware, sleep normally works?

I checked, all unchanged, falling asleep on a dull ...

Rep: (15)
Mixail071977 @ 18.07.19, 11:24*
In yutyube beautifully sing heated to a maximum of 60

I 4/64, and I and the torrent does not exceed 60. And by the way torrents - this is not a full CPU load. There are games that are loaded in full.

The advantage of this processor - actual temperature is low.
If the room is hot and poor ventilation box, then the temperature and may rise.

Rep: (33)
tipitun @ 18.07.19, 12:24*
... Guys. A question about the possibility of using the box with 4g usb modem remained open.
Will it work this bunch?

A modem you already bought? If not, easier mobile router and connect on wifi. With only modem stick and test. Theoretically everything is possible, may itself be acquired, and may have to pick your firmware.

Rep: (3107)
Firmware with voice dialing. Android 9.0 + Google Assistant Russ.

Attached Image
Attached Image

Screenshots from the firmware.
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image

Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image


Post has been editedVasily_5 - 30.07.19, 15:33

Rep: (74)
* Vasily_5, Such an issue on skinshotam invisible app ad blocker, and such as I have understood it is installed. There may be more about it ?. For me personally, it is critical, I need advertising, I have to see when testing applications where advertising is located, and so on.

Rep: (3107)
* Pavelka ,
No problem right now lay aaplet. It works great in Android 9.0
Well, I can still be manually added itself Host file.
The firmware is present minimal.
Laid out in a personal.

Post has been editedVasily_5 - 18.07.19, 21:56

Rep: (4)
Vasily_5 @ 18.07.19, 21:52*
It works great in Android 9.0

Do you plan to Version 2/16 and ATV?

Rep: (33)
Fizklavu found how to switch from English to rusky the drain. WIN pinch, then presses a space. In fizklavy settings, clear the stump should be Russian and to the example of the US international.

Posted on 07/18/2019, 23:56:

Frights @ 07/18/19, 15:23*
And where to go for warranty case?

Well, maybe to the seller. There I had a firm Moscow and parcel arrived from Moscow.

Rep: (41)
* doom1980
And I have other problems with the keyboard. The truth is on the remote T6 Plus that. When typing, symbols are repeated 2, 3, sometimes even more. Find the setting that would delay between pressing a small inputs. Although the print could not correcting every word. I never met such a setting?

Rep: (33)
* AL22,
Maybe that is not so with the remote control? I generally defective Claudia came with an attachment! Catching general signal just next to it, a step the waste is not working! Generally vypayal resistor antenna made directly from mikruhi plus medyahu wire loop has started at the keyboard as an antenna. Now catches console keyboard from the next room!

Rep: (33)
But since the rules consoles. Included HDMI-CEC on the console, is now remote from the tele-controls and console. TV set is turned off, set-top box automatically goes to sleep, wakes up when you turn on a TV and set-top box. Generally handy feature! All applications fly, sales Asphalt 9 but with the brakes but pulls.

Posted on 19/07/2019, 00:50:

I liked the app "Numbers tv" on Market. All 20 channels of commercial-free. It's a pity the number buttons are not fastened to the application, the channels are switched by means of a joystick, left-right.
Attached Image

Post has been editeddoom1980 - 19.07.19, 00:53

Rep: (41)
doom1980 @ 19.07.19, 01:46*
Asphalt 9 but with the brakes but pulls.

Yes, I also tried it. Brakes. For me not playable. 8 works best. GPU seen weak for such games. Accustomed to the PC to play 120FPS, now those 15 FPS with a frieze that gives 9 tar as something not very much.
Although I remember earlier on the PC managed to take the game to the same 15 FPS. I was on such DOOM3 Duron 900 and MX440. SchA I I7 8700k + GTX1080, almost everywhere in FullHD FPS 100 Ultra on. Monitor 120HZ way.

And on account of the console, I do not know if he is defective. Mikrikov dablklikayut the button (on the remote button is clicked in me as a mouse). Maybe even all such T6Plus. So the good control, if not such a defect. Here it is hoped that we can somehow delay when typing when you press enter. Normal keyboard I have not tried to connect to the console. I think there doubleclick will not be, though it is necessary to try.

Rep: (0)
I read a lot online, including dedicated repair. I ordered X96 Max 6/64 to Ali / Vontar, waiting. By cable clear change for good. Connect the cable with the technique off from the wall outlet, turn on and never touch the cable. It's enough? Worth buying HDMI ESD Protection for HDMI?
Maybe someone can write a brief instruction you need to do / change to normal operation after unboxinga consoles?

Full version    

Help     rules

Time is now: 27/09/19, 15:26