X96Max (S905X2) [Android] | [Media console]
New poll. !!!
HDMI Worker or Burned Out.
I have a worker. [ 1785 ] ** [90,7%]
Burned out For no reason. [ 121 ] ** [6,15%]
Plugged in hot. [ 57 ] ** [2,9%]
What firmware is right for me.
Stock. [ 1435 ] ** [72,92%]
Beelink. [ 190 ] ** [9,65%]
Android ATV. [ 333 ] ** [16,92%]
Boxing version.
Version 2/16. [ 234 ] ** [11,89%]
Version 4/32. [ 909 ] ** [46,19%]
Version 4/64. [ 825 ] ** [41,92%]
Do I like Boxing.
Like. [ 1486 ] ** [75,51%]
I do not like [ 83 ] ** [4,22%]
So-so. [ 397 ] ** [20,17%]
Total Votes: 1968
 



Rep: (3)
DiscussionX96Max (S905X2)
Tv box
Discussion пїЅ | Marriage and Repair пїЅ | Folk "firmware for Android TV consoles X96 Max пїЅ
Specifications
CPU - Amlogic S905X2 quad-core Cortex A53 processor up to 2 GHz
GPU - ARM Dvalin MP2 GPU
Memory - LPDDR4: / 4 GB LPDDR3: / 2 GB
Flash - EMMC: 16 GB No BT4.0 2 / 16g, 2.4 GHz WiFi RJ45 ethernet 10/100 port
Flash - EMMC: / 32 GB / 64 GB 4 / 32g and 4 / 64g Wi-Fi 2.4 and 5 GHz + BT4.0 RJ45 ethernet port 10/100/1000
Wi-Fi - IEEE 802.11 b / g / n / ac, 2.4g Wifi or 2.4 g and 5.8 GHz Wi-Fi
Bluetooth - BT 4.x + HS; Voice console support
I / o
1 * HD - HD 2.1, support HD CEC, dynamic HDR and HDCP 2.2, 4 K x 2 K 75 Maximum resolution output.
1 * AV - 480i / 576i standard definition
2 * USB - 1x USB 3.0, 1x USB 2.0
1 * IR - Remote connection receiver
1 * RJ45 - Ethernet interface, support 10/100/1000 m
1 * TF card - Support 4 GB / 8 GB / 16 GB / 32 GB / 64 GB
Power - DC 5 V / 2A; LED indicator, Work: blue; Standby: red
OS - Android 8.1
Video
* Amlogic video engine (AVE) with dedicated hardware decoders and encoders
* Support multi-video decoder up to 4K x 2K 60fps + 1x1080 P 60fps
* Supports multiple “secured” video decryption sessions and simultaneous decoding and encoding
* Video / picture decoding
-VP9 profile-2 to 4 K x 2 K 60fps
-H.265 HEVC MP-10 L5.1 to 4 K x 2 K 60fps
-AVS2-P2 profile up to 4 K x 2 K 60fps
-H.264 AVC hp L5.1 to 4 K x 2 K 30fps
-H.264 MVC up to 1080p 60fps
-MPEG-4 ASP L5 up to 1080p 60fps (ISO-14496)
-WMV / VC-1 SP / MP / AP up to 1080p 60fps
-AVS-P16 (AVS +) / AVS-P2 JiZhun profile up to 1080 P 60fps
-MPEG-2 MP / HL up to 1080 P 60fps (ISO-13818)
-MPEG-1 MP / HL up to 1080 P 60fps (ISO-11172)
-RealVideo 8/9/10 to 1080 P 60fps
A photo
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image


Firmware
A selection of firmware (received from the seller)
https: //droidboxforums…-firmware-links.14717/
Message No. 2094, author A.S._id Archive of firmware For Box X96 MAX.
Mail.ru cloud
Google drive
Beelink GT1 MINI total firmware for the whole series 2/32 4/32 4/64
Perezalita on poison. "Mirrored" .img + ota-11/30/18
2019.02.23. For stock firmware version boxes 2/16 and 3-4 / 32-64
Firmware for 2g ram.
Firmware for 3-4g ram.

Build. Custom firmware.
Useful.
Scattering
Firmware instructions.
Recovery.

Afrd - This is Automatic Framerate Daemon
SuperSU for AndroidTV boxes
List of software problems with the X96 Max console and their solution
The most reliable way to check Root rights.
Instructions for setting up a regular remote.
Smart YouTube TV
Setting up a physical keyboard.
ADB through the local network.
Run the Auto Frame Rate in SPMC using a script.
The perfect bundle of SPMC + Amlogic + AFR, for film fans
Setting the Power button on the Vontar G10 remote
For Beelink firmware for remote control.
Post number 1822, by anpaza "Direct audio output 2.0-5.1 from Cody"
KODI MIRRORS All versions 15.0-18.0 + Repo all assemblies.
Alternative Core for X96 Max
The Reset button does not work after flashing a problem on Beelink.
Connect our box via AV connectors.
The method of flashing with SD card on the principle is the same as through the cord.
Launcher Bilink (Lighthome) in Russian
Made a small mod launcher Lighthome 1.1.4
INSTRUCTIONS FOR DISPLAYING STARTED APPLICATIONS AND THEIR DELETION ON STOCK
Another instruction Recently launched applications on X96 Max
A small patch, for STOCK firmware, as a double tap, call the "Recent" menu
Multi-window mode.
Mbox Launcher v2
X-Plore Transfer files from one device to another.
Instructions for optimal operation of the PRA on the S905X2
No Ads on YouTube.

To help the user of choice.


Post has been editedVasily_5 - 29.09.19, 22:33



Rep: (7)
Syrill Snir @ 06/01/19 7:20*
1.8 GHz although in the characteristics (and even in the header of this topic) it is stated up to 2 GHz

understated firmware, in theory 2 ghz, but it can make problems overheating and so on.
The s912 was also designed for 2, in reality 1.5.

Post has been editedDrugsavagemessiahzine.com - 01.06.19, 08:02
Reason for editing:



Rep: (12)
* Syrill snir There is such a thing as peak and working.
Working is when the device will work stably for a long time.
Peak is when the device can work for a short time.
Obviously, the processor supports a frequency of 2 GHz, but for the device to work stably, the manufacturer limited the maximum frequency to 1.8GHz.



Rep: (70)
* Syrill snir
This is a common amlogic practice. Look in google s905 and the scandal that was with this soc. In fact, they say one thing; in fact, at the level of the blob, the frequency is set lower.

Post has been editedtalraash - 01.06.19, 11:16



Rep: (14)
Syrill Snir @ 06/01/19 6:20*
(and even in the header of this topic) announced up to 2 GHz

So, 1.8 is, in fact, “up to 2” and no more (by the way, even 2 no longer fits, then the term “inclusive” should somehow be used) ... Now, if there were more than 2, then the reason for accusation of lying, and so - "the wizard Suleiman is all honest, everything is without deception":) ...



Rep: (3142)
Sergey591983 @ 06/01/19 8:02*
Obviously the processor supports 2 GHz
Guys. Yes, this processor perfectly supports the frequency of 2.016 GHz.
At one time, another processor Amlogic s912 removed the lock to the maximum.MECOOL BB2 / MECOOL BB2 PRO [Android] (Post Vasily_5 # 61832801)
The fact is that the processor does not work all the time at the maximum frequency only when needed, this frequency rises to the maximum.
For example, my latest firmware is Frankenstein 1.2, where the processor runs 1.908GHz. works stably.
And the firmware for a minute is a little colder than the original stock.

Post has been editedVasily_5 - 01.06.19, 11:56



Rep: (70)
* Vasily_5,
How was it filmed? Amlogic has everything at the blob level to which there are no sources, even large partners collect custom blobs themselves. And any changes to cpu_freq will not give anything, except for beautiful and large tsiferok.
That's how it was on the s905 / 12 line ... And it is very similar that in the new soc the same approach.
Amlogic SoCs have an embedded microcontroller (Cortex-M3) used for controlling power and clocks
A proprietary and closed source firmware is loaded on the M3 at boot. Blob we have to include
Bangus clockspeeds bangus clockspeeds ign firmware firmware ign ign ign ign ign ign ign ign ign ign ign ign ign ign 15 12 12 12


Post has been editedtalraash - 01.06.19, 12:21



Rep: (3142)
* talraash ,
Well, if you disassemble the kernel there in the Boot section, take the ramdisk.
In the binary file init.rc
A lot of things written.
But again, it all depends on the version of Android.
On versions 6-7, this was spelled out to init.amlogicBoard.rc.



Rep: (70)
* Vasily_5,
It is clear) The kernel can request at least 100GHz until you rebuild bl30.bin from another DVFS at the output, when prompted, you will receive the fake frequency, but in reality it will be installed what is written in the blob)



Rep: (3142)
Guys. Hello. Good health.

Searching the global expanses of the Internet found an interesting thing.
Turn your boxing into Windows 10.
We get a kind of MINI-PC. Without the need for top and bottom bar status.
We get a desktop with the bottom line in which you can add any programs that are installed on your box.
Also on the desktop, you can create any shortcut.
Attach to the desktop any widgets installed in the box.
Attach your favorite programs to the Start panel.
There is a separate program to create a screen capture screenshot.
With the ability to install Microsoft Office package. (I did not check it is not really necessary).
In short, I will not scribble a lot, the system is very flexible and is configured for any desired result.
Screenshots:
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image

Made a full backup of the system. Those who want to try contact the PM. Everything is set up under Android 9.0.
Installation via mounted Recovery TWRP.
Archive BACKUP_Win10.7z unzip change folder name to BACKUPS, copy with all the contents next to Recovery twrp folder.
How to enter the mounted Recovery TWRP.X96Max (S905X2) [Android] (Post Vasily_5 # 79867668)
1. Flash firmware through computer using USB burning Tool. Here is the firmwareAndroid_P 9
2. Go to the twrp recovery.
3. Item recovery, mark all sections.

Must write againAll that you do at your own peril and risk.

Post has been editedVasily_5 - 01.06.19, 13:13



Rep: (215)
really it will be installed what is written in the blob)

I do not know how it is there in fact, but on my "people's" aosp firmware with a core and system from bilink 115 (firmware), the upper frequency is 1908 MHz. Well, it works for itself and works, without problems and overheating (there was a slight kolkhozing cool). :)



Rep: (4)
I wonder who uses which players to watch iptv?
And where do you get playlists?



Rep: (209)
vetaxa7_22 @ 06/01/19 5:55 pm*
where do you get playlists?

IPTV Playlists and Videos (Post K03blPb # 12688857)



Rep: (14)
UP
Merzkaya Gnida @ 05/31/19, 19:12*
Gentlemen, can someone ping a sabzh for a hundred requests (for windows: ping IP_Your_X96Max -n 100) and drop the statistics? Interests specifically on wi-fi when the device is not loaded by viewing / downloading / etc ... Thanks in advance.

Does the Koran not allow?



Rep: (105)
Merzkaya Gnida @ 05/31/19, 20:12*
Gentlemen, can someone ping a sabzh for a hundred requests

Between the router and the box ~ 8 m and a brick wall.
ping 192.168.xxx.xxx -n 100

Packet exchange from 192.168.xxx.xxx with 32 data bytes:
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 104ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 23ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 45ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 66ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 88ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 110ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 29ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 50ms TTL = 64
Reply from 192.168.xxx.xxx: number of bytes = 32 time = 71ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 93ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 12ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 33ms TTL = 64
Answer from 192.168.xxx.xxx: number of bytes = 32 time = 54ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 76ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 98ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 16ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 38ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 68ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 82ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 104ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 24ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 45ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 89ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 2ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 73ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 35ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 56ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 77ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 37ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 58 ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
Answer from 192.168.xxx.xxx: number of bytes = 32 time = 100ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 40ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 61ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 82ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 2ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 22ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 106ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 25ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 46ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 20ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 89ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 111ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 29ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 50ms TTL = 64
Reply from 192.168.xxx.xxx: number of bytes = 32 time = 71ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 92ms TTL = 64
Answer from 192.168.xxx.xxx: number of bytes = 32 time = 113ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 32ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 52ms TTL = 64
Answer from 192.168.xxx.xxx: number of bytes = 32 time = 44ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 25ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 34ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 17ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 38ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 59ms TTL = 64
Answer from 192.168.xxx.xxx: number of bytes = 32 time = 79ms TTL = 64
Answer from 192.168.xxx.xxx: number of bytes = 32 time = 100ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 18ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 39ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 59ms TTL = 64
Reply from 192.168.xxx.xxx: number of bytes = 32 time = 80ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 101ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 20ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 84ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 104ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 23ms TTL = 64
Answer from 192.168.xxx.xxx: number of bytes = 32 time = 44ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 64ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 85ms TTL = 64
Reply from 192.168.xxx.xxx: number of bytes = 32 time = 107ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 25ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 47ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 110ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 50ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 1ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 92ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 11ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 32ms TTL = 64
The answer from 192.168.xxx.xxx: number of bytes = 32 time = 53ms TTL = 64

Ping statistics for 192.168.xxx.xxx:
Packets: sent = 100, received = 100, lost = 0
(0% loss)
Approximate round-trip time in ms:
Min = 1 msec, Maximum = 113 msec, Mean = 45 msec


Post has been editedmaxvidstudio - 01.06.19, 20:37



Rep: (14)
Between the router and the box ~ 8 m and a brick wall.

Many thanks ...
It's even worse for me (up to 400 with an average of 110) ... The wall is there, even fewer meters But this is understandable - different routers / settings / radio environment / ...
You can, of course, attributed to the walls / meters / noise / etc. Another thing is unclear - why ping in the opposite direction (from box to router or computer and even speedtest server), through the same meter-walls I have from 1 to 6 with an average of 3 (for speedteste - somewhere from 5 to 12) - i.e. ten times faster? Well, if you put boxing in place, for example, raspberry (RaspberryPi) - ping is beautiful in both directions ... What is it that the Chinese have namut?
N.B. I tried the firmware different. On the X96s stick (S905Y2) - a similar story ...

Post has been editedMerzkaya gnida - 01.06.19, 21:41



Rep: (4)
Can I flash a 2/16 box with popular firmware or other firmware from 4/32?



Rep: (162)
* vetaxa7_22,
not



Rep: (4)
* Aktai ,
Does it come out for 2/16 custom firmwares?



Rep: (14)
* vetaxa7_22 , search taxis: stop_flood:



Rep: (209)
vetaxa7_22 @ 2.06.19, 9:10*
for 2/16

X96Max (S905X2) [Android] (Post LIALAV # 85307400)


Full version    

Help     rules

Time is now: 10/06/19, 1:57