X96Max (S905X2) [Android] | [Media console]



Rep: (349)
DiscussionX96Max (S905X2)
Tv box
Discussion � | Marriage and Repair � | Catalog of programs for Android set-top boxes � | Games for Android TV Box � | IPTV playlists � | Playlists IP-radio � | discussion panels |



Specifications
old revisions
  • OS: Android 8.1 | Android 9.0
  • CPU: Amlogic S905X2 quad-core Cortex A53 to 2 GHz
  • GPU: Mali-G31 MP2 Dvalin
  • ROM / RAM: 32/64 GB + 4GB LPDDR4
  • Network: Gigabit Ethernet, WIFI 802.11 b / g / n / ac, Bluetooth 4.0 | Ampack AP6356S
  • Video output : HDMI 2.1 to 4K at 75 Hz with HDR, AV-port 3.5mm (composite).
  • Audio: analog stereo audio through the AV-port digital audio via HDMI and optical S / PDIF
  • USB: USB 3,0x1, USB 2,0x1
  • Nutrition: 5V / 2A
  • Miscellanea: IR port for the external receiver and a slot for microSD memory cards

---------------------------------------------------------------------
  • OS: Android 8.1 | Android 9.0
  • CPU: Amlogic S905X2 quad-core Cortex A53 to 2 GHz
  • GPU: Mali-G31 MP2 Dvalin
  • ROM / RAM: 16 GB + 2GB LPDDR3
  • Network: 100 Mbit / s Ethernet, WIFI 802.11 b / g / n | Realtek 8189E
  • Video output : HDMI 2.1 to 4K at 75 Hz with HDR, AV-port 3.5mm (composite).
  • Audio: analog stereo audio through the AV-port digital audio via HDMI and optical S / PDIF
  • USB: USB 3,0x1, USB 2,0x1
  • Nutrition: 5V / 2A
  • Miscellanea: IR port for the external receiver and a slot for microSD memory cards
new revision
  • OS: Android 8.1 | Android 9.0
  • CPU: Amlogic S905X2 quad-core Cortex A53 to 2 GHz
  • GPU: Mali-G31 MP2 Dvalin
  • ROM / RAM: 32/64 GB + 4GB LPDDR3
  • Network: Gigabit Ethernet, WIFI 802.11 b / g / n / ac, Bluetooth 4.0 | Ofeixin 6222B-SRB RTL8822BS
  • Video output : HDMI 2.1 to 4K at 75 Hz with HDR, AV-port 3.5mm (composite).
  • Audio: analog stereo audio through the AV-port digital audio via HDMI and optical S / PDIF
  • USB: USB 3,0x1, USB 2,0x1
  • Nutrition: 5V / 2A
  • Miscellanea: IR port for the external receiver and a slot for microSD memory cards
A photo
Attached Image
Attached Image
Attached Image
Attached Image
How to determine the audit?
Reveals the console and see the markings on the board next to the CPU.
Example

The old revision with 2GB RAM
Q5X2 V1.0 18482
Q5X2 V1.5 19023
Q5X2 V2.0 18375
Q5X2 V4.0 18472

The old revision with 4GB of RAM
Q5X2 V3.0 18395
Q5X2 V5.0 18483
Q5X2 V5.5 19015
Q5X2 V7.0 19133

The new revision with 4 GB of RAM
Q5X2 LP3 19215
Firmware
Linux
PC software


Recovery
Instructions
Useful


Polls
Attached Image


Before asking a question in the subject line, please use the search engine!
Attached Image


filling cap proposals sent to QMS

Post has been editedCuphead - 26.06.20, 16:33



Rep: (41)
maximelson @ 17.04.19, 19:43*
The picture freezes, buzzing sound and reboot

Can change the power unit. Or it is necessary to update the firmware and reset to factory settings.



Rep: (89)
The people, as this console update Pleymarket? Something unnerving that he still 12.5.5. Are there safer ways? About Amlozhiktuls know, but dumb.

Post has been editedlama_alex - 17.04.19, 20:59



Rep: (295)
Cody updated on 19 alpha, seemingly unchanged (custom shell aura) vskidku - everything works as work ...



Rep: (74)
kigba @ 17.04.19, 21:11*
Cody updated on 19 alpha, seemingly unchanged (custom shell aura) vskidku - everything works as work ...


Can I have a link?

Now, too, there was a time, put Cody 18.1, with Afrd generally does not work when switching TV channels times three twitches, although all the frequency one and settings Afrd prescribed long endless stop (so that when the stop switch video was not), in spmc 17 amkodeke everything worked well, the switching frequency only when a new video with other multiple frequencies

And another question, there is no add-ons to speed up the script only works for HD (in the 17 version) to SD channels normally show?

Post has been editedPavelka - 17.04.19, 21:58



Rep: (69)
lama_alex @ 17.04.19, 21:54*
The people, as this console update Pleymarket?

Since iron is not certified in the play of market protection (it is written in the Play Store app), and apparently this is not updated. Of course you can try to download 4dpa market fresh and manually update. But I have not tried it, all that is necessary to sue have already downloaded, although part of a convenience store stock is set.



Rep: (295)
* Pavelka,
Cody here
Kodi (Post vansai # 84488126)
Refresh afrd. After version 0.3.1 (seemingly) switching correctly, in the winding speed does not jump, in general, all became clear, as in other players.



Rep: (0)
sasvlad @ 17.04.19, 10:19*
Who is to say what are the changes in the March firmware X96MAX_V311_20190302-1355? Do I need to update the custom?
On friktabe write that again nothing new, empty update:

* sasvlad
And why custom update, if the surface to install the update?
I found no flied anything like that.



Rep: (0)
State13 @ 17.04.19, 15:21*
jnon58 @ 17.04.19, 15:51
usb in the TV or set-top box so that it switches off the console when you shut down


that is turned off, and stuck there
logical, not?

At Thalmann usb power is not enough for the console.



Rep: (88)
The next branch "Instruction on the TWRP"
Thanks to the author!
X98 Pro [Android] (Post ☯ Alex ☯ # 84465499)



Rep: (827)
A.S._id @ 17.04.19, 19:38*
Prior to this experience was amlozhikov firmware?
Of course it was not, the prefix on the second day of a brick on the level ground, doing nothing, watching on youtube now I can not sew, that battle screenshotstytsCan have that on the advice of, still have a lot of experience in this
XFNeo @ 17.04.19, 20:04*
that Berner was unable to parse the firmware image. This error is issued after the firmware of choice?
in the course of a problem in windows 10, with images, those that are lined with accounts in the properties of an image to unlock, and a link that the Chinese vendor prefixes gave that to reflash do not come out, a permanent error, the image is damaged, I've launched a set-top box for the first time, immediately updated over the air, on the move, needed now is the latest that would flash, can in this whole thing, where it is, that would not drive on Yandex?



Rep: (0)
Good day to all! A few days ago I became the owner of the device. While I understand what's what. And I ask this question - the prefix want to use exclusively with an Internet connection via the LAN, and the not through Wi-Fi, and it turns out that the pre-installed applications seamlessly connect to the internet on the LAN, and the here, for example, set Tricolor TV online application, as there is plate with an annual subscription, and here's the rub - the app requires a Wi-Fi, connection via LAN in emphasis does not see. Can someone tell me if there is a way out of this situation with this specific application and other applications in similar situations?



Rep: (60)
* LekSPS,
In the topic in the fashion hat, try on one bet, I 2.2.439 of cable shows



Rep: (180)
LekSPS @ 18.04.19, 12:41*
is there any way out of this situation with this specific application

write the application developer



Rep: (0)
M.L.B. @ 04/18/19, 9:19*
In the topic in the fashion hat, try on one bet, I 2.2.439 of cable shows

And about fashion, I somehow did not think very stupidly downloaded from Google Play. Thank you very much for the advice. It turns out there is online 4pda whole theme dedicated tricolor TV online, and there are different modes. Thanks again, I will test today!



Rep: (2524)
bek775 @ 18.04.19, 01:40*
can in this whole thing, where it is, that would not drive on Yandex?

4/32/64 I have only version if you need to:
https://cloud.mail.ru/public/6fGf/ECng1d3AV



Rep: (0)
maximelson @ 17.04.19, 19:43*
The picture freezes, buzzing sound and reboot.


And I have this ... How are we going to fight?



Rep: (0)
Someone tell me how to work on the TV depends AFRD? TV for information of 24 frames, AFRD writes 23.96 on dynamic scenes visible friezes films. Without AFRD better. Maybe on TV need uplavnyalka?



Rep: (39)
anatoliatom @ 18.04.19, 13:02*
Without better AFRD


your TV itself does pull down
I think many so
me too
when it is impossible to look through the script spmc switching frequency, then I look through the MX PRO twitching and I do not notice, in the same youtube
afrd therefore did not put



Rep: (253)
* smarte72 Does not interfere with work-top box



Rep: (3534)
smarte72 @ 18.04.19, 13:15*
Well if someone suggested that over
do first?
What about the view header.
X96Max (S905X2) [Android] (Post Vasily_5 # 81341373)


Full version    

Help     rules

Time is now: 03/07/20, 21:32