FAQ on flashing RoverPC N7



Rep: (51)
FAQ on flashing -RoverPC N7
FlashinglDiscussion пїЅ | FAQ-flashing l FAQ

Useful topics : We do firmware independently l Catalog of topics for RoverPC flashing l Before flashing - check! l useful links
Dear users!
Everything you do, you do at your own peril and risk !!! No one except yourself is responsible for the possible consequences !!!

Post has been editedKUKUndrik - 29.08.16, 14:32



Rep: (51)
Rubricator


Official firmware
N7_V11_080317_RUSSIAN_QVGA_BSP1.0.7 -Russian
N810_V11_080415_ENG_QVGA_BSP1.0.7 -english
N810_V08_080229_CHS_BYD7787_BSP1.0.6 -Chinese


Unofficial firmware
Orefkov_RoverPC N7RUS - initfiles.dat need to tweak in the kitchen
AndreeeRoverPC_N7RUSClean - problem with IE
AndreeeWM6.0RoverPC N7_Soft - Vod like without glitches
New firmware files are located intopicand -a hat

Flasher
mondo.exe.rar

Kitchen (designer to edit the firmware)
Orefkov_Krichmar_Andreee RoverPC N7 Kitchen

Kitchen (dismantling of firmware):
Kitchen_rover_pc_n7

Kitchen WM 6.5
RoverPC N7 - Flashing (Post # 2004820)

porting xip n7
fast

Post has been editedkrichmar - 16.11.10, 21:25



Rep: (51)
How to go to the RoverPC N7 in the but-loader?

To go to the but-loader, you must: switch off the device, hold down the volume, and negative power (power) at the same time on the screen inscription -perustanovka software obespcheniya should appear.

Post has been editedAndreee - 27.09.08, 01:31



Rep: (51)
Is there access to the official Russian firmware on this device?

Freely available on the official website of ROVER PCHEREWM 6.0 pro

Post has been editedkrichmar - 18.06.09, 21:20



Rep: (51)
At clone kakgo device can alter RoverPC N7 and what firmware freely available?

ROVER PC N7 - IT AMOI N810 (as it is written in our animals)
At the moment there are: English and Chinese v11 v12

Post has been editedAndreee - 27.09.08, 01:39



Rep: (51)
Is it possible to paint the points, the firmware update process?
  • Turn off your device.
  • stifle negative volume and power (the screen legend, reinstalling the software will appear)
  • USB sticks
  • run mondo.exe
  • select the firmware file (browser)
  • Hit StartDownload!
  • launch the Task Manager go to the Processes tab and complete wcescomm.exe and if there is, WCESmgr.exe -If these processes do not have means you do not have active sync 4.5 or younger
  • The firmware will start automatically
  • After flashing to make hard reset -zazhat keys simultaneously on the red tube power and gps (near power) press YES


Post has been editedkrichmar - 12.07.10, 13:27



Rep: (51)
What's the difference if I ask to clone N810?

The difference is only one - nebudet Russian language firmware language on its behalf.
Example:
N810_V08_080229_CHS_BYD7787_BSP1.0.6
N810_V11_080415_ENG_QVGA_BSP1.0.7
N7_V02_080303_RUSS_BYD7787

Post has been editedAndreee - 27.09.08, 02:22



Rep: (51)
If rover n7 does not light up the screen -reinstalling software,what to do then ? how to sew?

Perform all the same thing just can not let go clamped klavishi.PROShOTSYa!

Post has been editedPrislav - 28.02.11, 16:37
Reason for editing: + from Cider Matrasych



Rep: (51)
Are there any unofficial firmware on RoverPC N7?

There are, in Russian and English ...are here

Post has been editedkrichmar - 14.07.09, 21:59



Rep: (51)
Are there opportunities and tools to edit the firmware RoverPC N7?

There is a kitchen for full editing firmware image:are here

Post has been editedkrichmar - 14.07.09, 21:57



Rep: (51)
In case of failure, if unofficial firmware is able to return the animal to life?

Yes, capable, even if no message appears on the screen "Reinstalling Software"

Post has been editedAndreee - 29.09.08, 22:26



Rep: (51)
For the firmware, whether there are any additional drivers will be needed?

No, but IDD must be installed Microsoft ActiveSync-for Windows XP.
Yes, the driver ishere- for Vista and 7

Post has been editedkrichmar - 14.07.09, 22:02



Rep: (51)
Can I post the firmware in the future, icpytat any problems during the campaign in SC?

PoliticsROVER PC does not mean punishment and thus void the warranty for independent software upgrade.

Post has been editedkrichmar - 14.07.09, 22:03



Rep: (1296)
Firmware RoverPC N7 out of the operating system Windows7 (and perhaps Vista)

1.Podklyuchaem apparatus in bootloader mode by holding the power button simultaneously and less volume. Open Device Manager, find it in paragraph mobile devices. (Fig.1)
Attached Image

2.Otkryvaem properties of the device and click update driver. (Fig.2)
Attached Image
3.Vybiraem click Run Search computer for driver software. (Fig.3)
Attached Image

4. In the window that opens, choose Select a driver from a list of device drivers. (Fig.4)
Attached Image

5.Nazhimaem Disk. (Figure 5)
Attached Image

6.Dalee click Browse. (Fig.6)
Attached Image
7.Vybiraem one of the two drivers, as will be repeated with the second driver in the same way as for the first. (Fig.7)
Attached Image

8.Zhdom driver installation. (Fig.8)
Attached Image

9. After installing the update to see this ustroysta successful. (Figure 9) Repeat the whole procedure for the second driver.
Attached Image

10.VSO!




also I enclose a file with drivers and manual in word format. Driver took from the same branch, just wrote manualchik :)
1.Attached fileUSB_MODEM_VISTA.rar(65.53 Kb)

2.Attached file___________________ roverpc_n7 ________ windows7.rar(312.16 KB)

wood for x64
you need to boot the computer press F8 until a menu will come out and choose not to verify the signature mode drivers, because the driver is not signed

Attached files

Attached filewindows_7_x64.rar(49.33 Kb)
Attached filedrvupdate_amd64.exe(12.45 MB)


Post has been editedkrichmar - 23.12.12, 21:23



Rep: (51)
Battery Calibration: Charges up to the green light, disconnected from the charger, switch off, hold the volume plus and power - on screen will appear calibrating, we lay down for the night (the process lasts until the full discharge of the battery - about -6+ hours), wake up turn, the new sticks charger, charging. All!
Perform after flashing sure (if I ask to be constantly to Use)

Post has been editedkrichmar - 01.12.09, 19:03



Rep: (51)
in windose 7 x64 firmware goes like in Vista and 7 windose the same, but need wood for x64,
you need to boot the computer press F8 until the menu and select "do not check the driver signature", because the driver is not signed
Attached filedrvupdate_amd64.exe(12.45 MB)
orAttached filewindows_7_x64.rar driver firmware(80.86 KB)


Post has been editedkrichmar - 08.01.13, 19:59


Full version    

Help     rules

Time is now: 30/08/20, 21:44