Ulefone Power - Firmware
under the messages to which you want to add links. Kiruha_21 @ 09/10/18, 23:09
nwram error. If there is something to accomplish
Yes, there is a mistake (or rather, there is such a network), although I was already used to it, it was on the drain
by the way! that MicroG tried something with gaps (it doesn't work normally), or if you install pico, will it work without problems ??
admin1, I recommend PICO for custom firmware, the rest will not work correctly Post has been editedkiruha_21 - 11.09.18, 23:10
Only when I turn on the finger scanner does it turn on (for 2-3 seconds) and the screen turns off?
Furious.
Furious.
13.09.18
Note: I strongly recommend installing a clean build
- Updated EngineerMode (MTK) icon
- Updated font that adds support for iOS 11.1 smiles
- Replaced the icons of the stock applications had to be remade under 14.1 of 15.1
- Round Icon enabled
- Fixed device certification error. But it is not exactly
Note: I strongly recommend installing a clean build
- Updated EngineerMode (MTK) icon
- Updated font that adds support for iOS 11.1 smiles
- Replaced the icons of the stock applications had to be remade under 14.1 of 15.1
- Round Icon enabled
- Fixed device certification error. But it is not exactly
Post has been editedkiruha_21 - 15.09.18, 16:36
TWRP 3.2.3
Recovery is assembled on the basis of the Android 6.0 version kernel firmwareT875d_GQ3026AF_Power_MM_20170612:
Download TWRP
Post has been editedkiruha_21 - 23.09.18, 09:48
Lineage 14.1
Firmware compiled from source
✔Unofficial
Based on: Lineage OS
AAndroid version: 7.1.2
PDeveloper:Hadenix
%A source:Telegram | XDA | NeedROM
&List of changes
03.02.19
- Build firmware always comes from scratch.
- Security patch for December.
- Updated source codes LineageOS for 02/03/19 (a lot of fixes).
- System update - 3 points - show the change log (Attached your link with the changes, you can now watch the changes there).
- Round Icon is disabled.
- New launcher CPL (Customized Pixel Launcher) instead of Trebuchet.
- Removed NVRAM WARNING error: Err = 0x10 at the WIFI point.
Irrelevant assemblies:
14.12.18
- Sound correction.
10.12.18
Installing the firmware only clean!
- Rebuilt assembly from scratch.
- Basis for stock kernel 3.18.19, taken from firmware for 12.06.2017.
- Repaired the microphone blade.
- Fixed Google Play. The phone is quietly certified device.
- Updated source codes LineageOS for 12/10/18 (a lot of fixes).
- Security Update for November 5, 2018.
- Animation of windows, transitions and the duration of the animation is set to 0.30 x.
- YGPS (MTK) and EngineerMode (MTK) removed from the firmware.
- Advanced selection of network standards.
- Preferred network mode changed to LTE / WCDMA / GSM.
- LiveDisplay is disabled and does not turn on, as it does not work correctly (Disconnected in the source).
- Fixed autofocus, the camera functions as expected, replaced by lib.
- System update - 3 points - show the change log (Attached your link with the changes, you can now watch the changes there).
- Fixed IrDA (remote control) operation - thnk @ marc2800
- Fixed fingerprint scanner.
- Round Icon included.
- Replaced the main wallpaper from LineageOS 16.
- Icons of standard applications are replaced by mine.
- Build firmware always comes from scratch.
- Security patch for December.
- Updated source codes LineageOS for 02/03/19 (a lot of fixes).
- System update - 3 points - show the change log (Attached your link with the changes, you can now watch the changes there).
- Round Icon is disabled.
- New launcher CPL (Customized Pixel Launcher) instead of Trebuchet.
- Removed NVRAM WARNING error: Err = 0x10 at the WIFI point.
Irrelevant assemblies:
14.12.18
- Sound correction.
10.12.18
Installing the firmware only clean!
- Rebuilt assembly from scratch.
- Basis for stock kernel 3.18.19, taken from firmware for 12.06.2017.
- Repaired the microphone blade.
- Fixed Google Play. The phone is quietly certified device.
- Updated source codes LineageOS for 12/10/18 (a lot of fixes).
- Security Update for November 5, 2018.
- Animation of windows, transitions and the duration of the animation is set to 0.30 x.
- YGPS (MTK) and EngineerMode (MTK) removed from the firmware.
- Advanced selection of network standards.
- Preferred network mode changed to LTE / WCDMA / GSM.
- LiveDisplay is disabled and does not turn on, as it does not work correctly (Disconnected in the source).
- Fixed autofocus, the camera functions as expected, replaced by lib.
- System update - 3 points - show the change log (Attached your link with the changes, you can now watch the changes there).
- Fixed IrDA (remote control) operation - thnk @ marc2800
- Fixed fingerprint scanner.
- Round Icon included.
- Replaced the main wallpaper from LineageOS 16.
- Icons of standard applications are replaced by mine.
YScreenshots
 |
 |
 |
 |
 |
 |
 |
^Installation Instructions
Recommended. TWRP
First you need to make a backup of the following sections on the stock firmware (This is done for when IMEI flies then restoring these sections IMEI will return): nvram, frp, nvdata.- Download the archive with the firmware.
- Go to Wipe = Format Data - write yes
- Then make Wipe = Advanced Wipe - Dalvik / ART Cach, System, Cache, Data sections.
- Flash through TWRP firmware + GApps.By desire Magisk.
- Reboot device.
F.A.Q
Question. How to enable the item in the "For Developers" settings
Answer: Go to the settings / about the phone and tap on the "Build Number" 7 times
Question. How to make an advanced reboot menu?
Answer: You need to enable an extended reboot in the "For Developers" settings.
Question. I can not apply the theme, what to do?
Answer: In Lineage OS 14.1 is missing Theme engine - the use of themes is impossible. Alternative, we putSubstratum theme engine.
Answer: Go to the settings / about the phone and tap on the "Build Number" 7 times
Question. How to make an advanced reboot menu?
Answer: You need to enable an extended reboot in the "For Developers" settings.
Question. I can not apply the theme, what to do?
Answer: In Lineage OS 14.1 is missing Theme engine - the use of themes is impossible. Alternative, we putSubstratum theme engine.
!Additions to the firmware
вљЎпёЏ Download: LineageOS 14.1 for Power | Gapps ARM64 (7.1 Pico) | Magisk (root)
Attention: Please respect the work of others and indicate the link to the source: thank_you:
- PROJECT CLOSED -
Post has been editedHadenix - 01.05.19, 14:03
Reason for editing: updated post
15.09.18
- Reboot menu: recovery mode is renamed to recovery.
- Camera focus corrections
- Changed the focus of the Teal system to blue (Pixel XL).
Download: lineage-14.1-20180915-UNOFFICIAL-power
Post has been editedkiruha_21 - 15.09.18, 21:46
- Reboot menu: recovery mode is renamed to recovery.
- Camera focus corrections
- Changed the focus of the Teal system to blue (Pixel XL).
 |
Download: lineage-14.1-20180915-UNOFFICIAL-power
Post has been editedkiruha_21 - 15.09.18, 21:46
In general, I won the firmware for certification helpsnanodroid
The nano-droid is not an official replacement for gapps (this is in general) but a real open implementation of the google application service with all the consequences
need to
1. install magisk
2. install nano droid
For interaction with Google, it will no longer be gapps, but microG
does not always work directly, but it works :-)
need to
1. install magisk
2. install nano droid
For interaction with Google, it will no longer be gapps, but microG
does not always work directly, but it works :-)
admin1 , I realized. I try to build other builds, working on the g play certification solution. As something will, I will release a correctional build.16.09.18
- Fixed Google Play
admin1, It will be available soon and will be able to download. You can see screenshots with opengapps installed, everything works.
Download: lineage-14.1-20180916-UNOFFICIAL-power
Post has been editedkiruha_21 - 16.09.18, 20:39
- Fixed Google Play
admin1, It will be available soon and will be able to download. You can see screenshots with opengapps installed, everything works.  |
 |
Download: lineage-14.1-20180916-UNOFFICIAL-power
Post has been editedkiruha_21 - 16.09.18, 20:39
Kiruha_21 @ 09/16/18, 18:41
Download: lineage-14.1-20180916-UNOFFICIAL-power
put this firmware
The firmware works fine, the gaps have been installed and do not turn your head :-)
as far as I understand, the IR port does not work, in general, the performance is higher than the drain (or just the fact that firmware from 0 costs) consumption, it seems to be half a bit on my half-dead battery (again, it is possible that the placebo effect also affects what firmware from 0 costs)
overall impression - great firmware
for permanent use, I think it is suitable, because during use it has never been rebuilt :-)
admin1 @ 09/17/18 11:42
while I understand it does not work IR port
©savagemessiahzine.com2005-2019. All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement