> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Xiaomi Mi 8 - Unofficial firmware



Rep: (248)
Xiaomi Mi 8 - Unofficial firmware
PictureXiaomi Mi8, dipper
Description | Discussion пїЅ | Purchase пїЅ | Accessories пїЅ | Marriage and Repair пїЅ | Xiaomi club пїЅ | Modification and decorations пїЅ | Power consumption and autonomy пїЅ | Camera talk пїЅ | Catalog of topics for MIUI пїЅ | Google Pay does not work пїЅ | Mi Account пїЅ | Unlocking XIAOMI bootloaders пїЅ | Project treble пїЅ | MIUI firmware пїЅ | Unofficial firmware пїЅ

FAQ

Important information
In this topic, all content assumes use on devices with an UNLOCKED bootloader!
If you have any problems with the work of the firmware, be sure to stick the device logs (logcat)! How to get themwritten here.
You can not block the bootloader in the presence of any modifications of the device!
Before you make a backup or reflash the device, it is advisable to remove all types of LOCK (figure, PIN, password, fingerprint or face)
Drivers and Utilities
ADB, Fastboot and drivers
Installing ADB / Fastboot drivers - recommended.
ADB Installer v1.4.3Drivers, ADB and Fastboot without problems.
Automatic installation of ADB drivers
Minimal ADB Fastboot 1.4.1 portable
USBDeview- Display and remove USB drivers installed on your computer.
Utilities
Miflash v2018.5.28.0 portable- The official flasher for fastboot firmware.
MiFlashPro- official flasher.
XiaoMiTool V2 project- unofficial flash driver.
TOOL ALL IN ONE- universal program for working with the device.
Mi PC Suite 3.0 beta- official firmware flasher Recovery.
Universal Installer Recovery for Windows
Firmware
Our device has a code namedipper
-proshivka updated weekly / monthly
-proshivka has not been updated for 3 months


AICP
AOSIP
AOSiP DerpFest
Ancient Civilization
Aosp Extended
AqariOS Unofficial
ArrowOS
BaikalOS
BlissOS
BlissRom
Bootleggers rom
CesiumOS
CorvusOS
crDroid
Dotos
Evolution X
Flyme 8
IONOS
LegionOS
LineageOS
MSM Xtended
MoKee ROM
NitrogenOS Unofficial
OxygenOS PORT
Posp
Paranoid Android
Pixel Experience
PixysOS
RebellionOS
Resurrection Remix
RevengeOS
ShapeShiftOS
StagOS
SuperiorOS
Syberia project
The PixelROM
ZenXOS
Kernels
Our device has a code namedipper
the kernel is updated weekly / monthly
the kernel has not been updated for 3 months


canting kernel
Disrupt kernel
LawRun kernel
Malakas kernel
MiPa kernel
NetHunter kernel
No Gravity kernel
Pendulum kernel
Polar kernel
Revolution kernel
Simple kernel
Sphinx kernel
Twisted kernel
yuki kernel
Instructions
Gapps / Recovery / Root / Vendor
Googleapps
To gain access to all Google services, you must use a basic set of Google apps - GoogleApps.
Googleapps

Recovery
Official TWRP
Pitch black recovery
OrangeFox Recovery
OrangeFox RecoveryR11 (Beta / Alpha (Unofficial))

Root
To get Root access, simply flush the Magisk archive from the TWRP.
В® Magisk | Uninstall magisk

Vendor / firmware
To install unofficial firmware, you need to use the recommended version of the Vendor or Firmware (specified in positions with firmware) or newer.
Vendor / firmware
miscellanea
Poll results
Poll Result 06.15.2019
Attached Image
Poll Result 07.22.2019
Attached Image
Poll Result 08.10.2019
Attached Image
Attached Image
Attached Image
Poll Result 07.18.2020
Attached Image
Attached Image



For filling caps, please contactmoderatorssection through a button Pictureunder the messages to which you want to add links.

Post has been editeddestroyer71 - 23.11.20, 09:34
Reason for editing: Editing



Rep: (33)
Firmware reviews


Post has been editeddraiv88 - 26.08.19, 01:40



Rep: (1860)
M
We move to subsectionXiaomi



Rep: (59)
Installing Pixel4Rom based on Android 11
!!! Hyde covers installation from scratch, without saving the data, so make a backup of your computer files.

Official page of the firmware -Forum.xda-Developers.com + Android 11

Before installing the firmware:
1. You must have unlocked bootloader
2. Necessary Adb Driver -https: //drive.google.c...-YUEhzTHBqaWphbmM/view
3. Downloads the latest versionhttps://osdn.net/proje....009-rel.20200912.zip/
4. Scanned TWRP or Orange

Optional: need if you are having some problems are not typical, or want to completely reset the system, if there are any problems. It is recommended to establish through the MI-FLASH latest Global Beta MIUI, TWRP, and after this firmware R3R
- InstallMIUI 10 BETA 9.6.27 - download => https: //bigota.d.miui...._global_30e0fc22ef.tgz
- InstallTWRP File attachments
1. Archive with MIUI 10 BETA 9.6.27 unpack to the C drive, then it will have to select
2. Download and unzip the MI-FLASH 2018-5-28 how to work with it, is described in detail by reference =>Xiaomi Mi 8 - Unofficial firmware
3. Switch the phoneFastboot =>Turn off the phone, then we press the button "turn the volume down +" appears hare, and attach to a computer
4. ThroughMI-FLASH 2018-5-28 set MIUI 10 BETA for Fastboot !!! do not forget to MI-FLASH choose "clean all" !!! can not stand "clean all and lock" !!!
5. After installation, translate phone againFastboot =>Turn off the phone, then we press the button "turn the volume down +" appears hare, and attach to a computer
6. We putTWRP_3.4.0-0 (there is in investments) - how to put TWRP => How to put TWRP
7. PutOrangeFox R10.1 Stable TWRP Even the latter does not yet support 11 Android, so we put TWRP, and the last OrangeFox R10.1 Stable rolling out of it
There are in investments, or download the links
DOWNLOAD 1 -https: //sourceforge.ne...rangefox/files/dipper/
Download 2 -https: //files.ogenefo...angefox-stable/dipper/
We load in TWRP, throw the file with OrangeFox R10.1, choose itInstall , then a reboot will be rebooted in OrangeFox

Installing firmware (The last OrangeFox you must be installed)
1. Make Format Data -Menu -> MANAGE PARTITION -> Data -> Jackdaw -> Format Data ->handles write - yes , then back, by arrows <- , go out to the main menu, reboot ->Recovery
2. Go down to the tabWipe , celebrate the first 5 points (with Dalvik to Internal Storage), and move the slider Swipe to Wipe , Further Back , Menu -> Reboot -> Recovery
3. Connect to the computer through the cord, the firmware is poured from the computer to the root.
4. At the bottom of the left, choose Files, click on the firmware, and thenSwipe to Install
5. After EEPROM HitWipe cache / davlink , Doing " Swipe to Wipe "And click Reboot system

Add fingerprint
Settings ->Security ->PIXEL IMPRINT ->Add a fingerprint

Attached images
Attached Image
Attached Image
Attached Image
Attached Image


Attached files

Attached fileTWRP_3.4.0-0.zip.(33.23 MB)
Attached fileOrangeFox-R10.1-Stable-Dipper.zip.(42.04 MB)


Post has been editedlinuzzz7 - 13.09.20, 12:45
Reason for editing: Updated 11 Android'a



Rep: (108)
* linuzzz7,
* Mr.Fail,
There is recognition to face, they stuck it in Smart Lock, there is. But it frankly works much worse than in MUE - sometimes it does not work and does not work in the dark at all (IR illumination does not turn on). Yes, and in any case, it simply allows you to unlock, it does not throw out at once on the desktop. And the print scanner works Korivaya than in MUE (worse recognizes), but it throws away at once on the desktop. Smart unlock works well when the smart scatter clock is connected (in particular Gear S3) - as soon as the connection disappears - it requires authentication by the face / finger / password (PIN code).
Manage gestures - a parody of control gestures, is not much different from the buttons at the bottom, take up much space. In Mui, IMHO, an ideal control gestures!
Super Bomb - ANM with full notification of all that has notified all! with normal application icon, the weather and the percentage of the battery at the bottom! If the same will be delivered to Mui - it will be a total success! Well, in the right-hand side edge of the notification icons are - they would have to Mui ... but not without a spoon of tar - the location is static - always in the same place are located the clock and the battery - if postoyanke use - will burn amoled with time in the wrong place .
The camera sucks, almost no settings, there frontalanya reason only 5MP shows the maximum, and if mesenzherah fotkat - overexposure makes a terrible reason. We have to take a picture with the camera and instant messengers (vayber / votsap) has chosen a photo to throw - uncomfortable :(
The rest - responsive without lags. Daily use can be.
The battery is based on always-on ADP - quite norms ADP functionality is fully justified on all 500%.
* linuzzz7,
ANM off - it is in the settings screen - Automatic. the inclusion of the screen.

By the way why vibration works otherwise than Mui - a nice, different. Definitely I like more than Mui.
And yet - Fingerprint works as a button is always everywhere as the Enter-key. I did not find where this stuff shut down - and it accidentally touches something itself presses on the screen or throws line, or preceded by a space. Sometimes takes out much.

Post has been editedwinmustdie - 08.10.18, 12:47



Rep: (1068)
MiPa Kernel
by palaych

MIUI-AOSP [9.0]

Description:
  • Base on LineageOS Pie Sources (Bruno Martins commits) with upstream linux-stable
  • Merge CAF tag 'LA.UM.7.3.r1-06900-sdm845.o'
  • Linux version 4.9.166
  • Compiled with Clang 9
  • Add Boeffla Wakelock Blocker
  • Enable support for NTFS r / w
  • Enable support for sdFAT filesystem
  • Kcal Advances Color Control
  • Enable TTL target
  • Vibration Control
  • Sound Control by flar2
  • Add Wireguard Driver
  • Enable support Sony Dualshock PS3 / PS4 (usb-otg) and Xbox Controller
  • Boost Drivers by sultanxda
  • Some tweaks for battery / performance
  • AnyKernel2 flashable zip by osm0sis

List of changes:
V5.2:
  • I removed a lot of useless and harmful patches
  • Crypto upstream bump
  • dipper: fix gps
  • Update cpu boost driver by sultanxda
  • Some other fix / changes


V5.1: - dropnul GPS driver, the next version Fixed a
  • Merge Linux version 4.9.166
  • Merge many CAF patch
  • Upstream Google Common 4.9
  • Compile with Clang 9.0.2
  • Fix deepsleep with 898000.qcom, qup_uart wakelock
  • Add API to mark IRQs and kthreads as performance critical


V5.0:
  • Full re-write kernel tree, cleaner tree, removed many patch (useless and unnecessary), many other changes (patch's)
  • Merge Linux version 4.9.164
  • Compile with Clang 9.0.1
  • Updated Boost Drivers by sultanxda


v4.9:
  • Fix last merge caf / als
  • Updated fs / f2fs (support F2FS_FS_VERITY)
  • Compile with Clang 8.0.9


V4.8:
  • Upstream Linux version 4.9.161
  • Merge CAF tag 'LA.UM.7.3.r1-06900-sdm845.0'


v4.7:
  • Upstream Linux version 4.9.160
  • Update and clean cpu_input_boost / devfreq_boost drivers
  • Revert some tweaks
  • Some optimize in defconfig
  • Other tweaks / fix / etc..too lazy to write.


V4.6:
  • Upstream Linux version 4.9.155
  • Merge some last LOS commits
  • Revert: 'Dynamic SchedTune Boost v3'
  • Update cpu_input_boost driver
  • Some merge fix in wlan driver
  • Update camera drivers (cleaned patch)
  • Other tweaks / fix / etc..too lazy to write


V4.5:
  • Upstream Linux version 4.9.154
  • Merge last LOS commits
  • Add some tweaks / fix / etc..too lazy to write.


V4.4:
  • Merge tag 'LA.UM.7.3.r1-06700-sdm845.0'
  • Upstream Linux version 4.9.152
  • tweaks tcp_westwood
  • Add Dynamic SchedTune Boost v3
  • merge some last los commits
  • revert gpu 180mhz
  • revert some sched tweaks
  • other changes / tweaks


V4.3:
  • Upstream Linux Version 4.9.151
  • Compile with Clang 8.0.7 and GNU GCC 8.2.1, add optimize for sdm845
  • GPU UC 180Mhz (test)
  • Enable LZ4 compression
  • Some update dts to dipper-p-oos
  • Fix Kcal
  • DTS: Adjust Energy Model to be inline with Pixel 3 (test)
  • Tweak's sched
  • Other changes
  • Updated drivers camera (maybe full fix portret mode in miui camera)
  • Full re-write boot scripts


V4.2:
  • fix freeze (don`t work) potrait mode in miui camera
  • some change / tweaks
  • disabled some debug in defconfig
  • block kernel wakelock 898000.qcom, qup_uart by default
  • add sound control by flar2


V4.1:
  • Update Linux version 4.9.148
  • drivers camera: checkout dipper-p-oos (fix OIS)
  • Enable support xbox controller
  • Some changes in anykernel2 script


V4.0 (only for Android Pie):
  • Rebase on pie source (based on Bruno Martins commits)
  • Merge CAF tag 'LA.UM.7.3.r1-06600-sdm845.o'
  • Upstream Linux version 4.9.147
  • Optimize defconfig
  • Add Boeffla Wakelock Blocker
  • Enable support for NTFS r / w
  • Enable support for sdFAT filesystem
  • Backlight Minimum Brightness Control
  • Kcal Advances Color Control
  • Enable TTL target
  • Vibration Control
  • Add maple i / o scheduler
  • Add Wireguard Driver
  • Compiled with CLANG 8.0.6
  • Fix source code
  • Enable support Sony Dualshock PS3 / PS4 (usb-otg)
  • Boost Drivers by sultanxda
  • Some tweaks for battery / performance


Past versions:
V3.6:
  • upstream linux version 4.9.140
  • removed boost drivers by sultanxda and some others tweaks
  • enable support sony controller (usb)
  • compile with Linaro 7.3.1


v.3.5:
  • compiled with GNU GCC 8.2
  • merge commits binder
  • merge commits sdcardfs
  • merge linux version 4.9.137
  • merged tag "LA.UM.6.3.r4-05800-sdm845.0"
  • boost drivers by sultanxda
  • merge los commits fs: sdfat


v.3.4.2:
  • compiled with GNU GCC 8.2.1
  • add cortex-a75 / a55 flags
  • some fix source code
  • merge latest los commits


v.3.3:
  • add i / o schedulers maple (by default)
  • Kcal Advances Color Control (experimental features)
  • Vibration Control (experimental features)
  • Backlight Minimum Brightness Control (experimental features)
  • schedutil tweaks
  • fix brightness led notification (polaris)
  • maybe something else ...


V3.2:
  • LOS-source based
  • re-base linux-stable tree
  • Merge CAF tag 'LA.UM.6.3.r4-05300-sdm845.o'
  • Linux version 4.9.135
  • optimize defconfig
  • use last google toolchain 4.9
  • add boeffla wakelock blocker
  • ttl target
  • ntfs r / w support
  • exfat support
  • something fix / tweaks and etc ...


V3.1:
  • not public realised, first realised for mi8


Settings:

Installation:
  1. If there is another custom kernel or my old version to 4.3, before you install this, it is necessary to flash the stock firmware of your boot.img in TWRP, then already magisk and my core. All new versions starting with 4.4, you can update without it.
  2. Flash in TWRP.
  3. If Magisk has already been set, it will remain if magisk was not, then you need to flash.



Download V5.2: AFh | IDisk
Past versions:
All versions: AFh


XDA

It is forbidden to spread to other sites and mirrors.


Post has been editedpalaych - 02.04.19, 22:14
Reason for editing: 5.2



Rep: (59)
Clean install Lineage 16.0 for Xiaomi Mi 8 (dipper) - 2019-08-07
Firmware page on XDA -https: //forum.xda-deve...-0-unofficial-t3845218
Download the latest version fromhttps://download.lineageos.org/dipper

Before installing the firmware:
1. You must have unlocked bootloader
2. Necessary Adb driver on a computer -https: //drive.google.c...-YUEhzTHBqaWphbmM/view
3. Downloads the firmware itself -https://download.lineageos.org/dipper
4. Downloadgaps https://opengapps.org/ - choose Arm64 + 9.0 + nano - file open_gapps-arm64-9.0-nano-20190828
5. Download the MIUI 10 BETA 9.6.27 -https: //bigota.d.miui...._global_30e0fc22ef.tgz
6. Installed TWRP (file attachments with him - TWRP_unofficial_ + Decrypt + works)

Firmware MIUI, LineageOS + OpenGaps
1. Switch the phoneFastboot =>Turn off the phone, then we press the button "turn the volume down +" appears hare, and attach to a computer
2. ThroughMI-FLASH 2018-5-28 set MIUI 10 BETA 9.6.27 for Fastboot !!! do not forget to MI-FLASH choose "clean all" !!! can not stand "clean all and lock" !!!
3. After installation, translate phone againFastboot =>Turn off the phone, then we press the button "turn the volume down +" appears hare, and attach to a computer
4. We putTWRP file attachments, unpack the archive, and run InstallTWRP and reboot automatically in TWRP
5. We doformat data => Wipe -> format data - writing yes . Go back to main menu and reboot in TWRP -> Reboot recovery
6. Wipe ->A dvanced Wipe ->choose topics / System, / data and / cache and format them.
7. Connecting to the computer via a cable, to fill the computer to the root of the firmware and franca
8. Go to the menuInstall - choose lineage-16.0-xxx ...- nightly-dipper-signed.zip , Press " Add more zips "- and choose open_gapps-arm64-9.0-nano-20190129 and svaypaem " Swipe to confirm Flash "
9. After the firmware clickWipe cache / davlink , Doing " Swipe to Wipe "And click reboot system

Additions:

1. Set up Google Pay
1. Becoming Google Pay-Market, launch it and get the message - "that the card can not be bound"
2. swing with Magisk + MagiskManagerhttps: //forum.xda-deve…al-systemless-t3473445
Or direct links
- Magisk 19.3 - https://github.com/top...v19.3/Magisk-v19.3.zip
- MagiskManager 7.3.2 - https://github.com/top...giskManager-v7.3.2.apk
3. reloaded into TWRP put Magisk 19
4. Reboot the system, put MagiskManager 7.3.2
5. Go to the root MagiskManager hide from Google Pay
6. reloaded into TWRP and putGPay.SQLite.Fix.v1.7.zip - have attachments, and reboot the system
7. Go to the Google Pay and bind your card.

2. Turn on the control in the pixel
Settings ->System ->gestures ->Touching the main screen and hold up

3. Change the launcher
Can be exchanged for lawnchair, put it out PlayMarket

4. Installation chamber with additional functions
Downloading -https: //f.celsoazevedo...cm1/F1v9.5_6.2.030.apk
It puts the system

5. Keyboard
You can change the keypad on guglovuyu downloading of PlayMarketa or any other.

Attached images
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image


Attached files

Attached fileGPay.SQLite.Fix.v1.7.zip(8.24 KB)
Attached fileTWRP_unofficial_ + Decrypt + works.rar(31.61 MB)


Post has been editedlinuzzz7 - 28.08.19, 19:03
Reason for editing: Current instructions on 28/08/2019



Rep: (59)
Installation - AOSiP Official
Official page of the firmware -https: //forum.xda-deve...usion-project-t3858987
Download the latest version to date 03.10.2019 -http: //get.aosiprom.co...al-dipper-20190310.zip
New versions spread here -https://ota.aosiprom.com/dipper

Actions before the firmware:
0. The phone needs to be unlocked bootloader !!!
1. Backup all data to a PC
2. InstalledAdb driver - https: //drive.google.c...-YUEhzTHBqaWphbmM/view
3. downloadedMI-FLASH 2018-5-28 - //savagemessiahzine.com/forum/d...18.5.28.0+portable.zip
(I will sew through MI-FLASH, so you can sew through TWRP if it is installed you)
4. Download the latestTWRP-3.2.3-11-10 //savagemessiahzine.com/forum/dl/post/14597085/TWRP.zip
5. Download the firmware itself -http: //get.aosiprom.co...al-dipper-20190310.zip
6. Downloadgaps https://opengapps.org/ - choose Arm64 + 9.0 + nano - file open_gapps-arm64-9.0-nano-20190312
7. DownloadMIUI 9.2.21 BETA 10 http: //bigota.d.miui.c..._global_4c00e625fa.tgz - in the instructions below, I'll put it through

Firmware:
0. translate phoneFastboot =>Turn off the phone, then we press the button "turn the volume down +" appears hare, and attach to a computer
1. ThroughMI-FLASH 2018-5-28 set MIUI 9.2.21 BETA 10 for Fastboot !!! do not forget to MI-FLASH choose "clean all" !!! can not stand "clean all and lock" !!!
2. After installation, translate phone againFastboot =>Turn off the phone, then we press the button "turn the volume down +" appears hare, and attach to a computer
3. We putTWRP , Reboots TWRP
4. Makeformat data => Wipe -> format data - writing yes . Go back to main menu and reboot in TWRP -> Reboot recovery
5. Wipe -> Advanced wipe ->select all but, USB ...
6. Connecting to the computer through a cord, with the company fill in the root of the firmware and franca
7. Go to the menuInstall - choose AOSiP-9.0-Official-dipper-20190310.zip , Press " Add more zips "- and choose open_gapps-arm64-9.0-nano-20191202 and svaypaem "Swipe to confirm Flash "
8. After EEPROM HitWipe cache / davlink , Doing " Swipe to Wipe "And click reboot system

Additions:
1. Hide cutout screen - Owl's Nest - Status bar - Icons - Hide cutout screen
2. Turn control in pixel - Owl's Nest - Gesture - standard gestures AOSP - Touching the main screen and hold up
3. AlwaysOnDisplay - Settings - Display - Auto power on screen - Always On
4. Google put the camera - go to the link https: //www.celsoazeve...google-camera/dev-bsg/ and swing the latest camera phone for mi8
5. Enabling file transfer - Settings - For Developers - Configuration USB default - file transfer
6. Magisk - https: //forum.xda-deve…al-systemless-t3473445
7. To work Google Pay - Xiaomi Mi 8 - Unofficial firmware

Attached images
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image


Post has been editedlinuzzz7 - 12.03.19, 14:08
Reason for editing: raised in the topic header



Rep: (59)
OFFICIAL MIUI BETA firmware via MI-FLASH
!!! This step needs to be done before going to the custom
0. device must be unlocked (at bootinscription Unlock and open padlock )
1. Download and set driversAdb driver https: //drive.google.c...-YUEhzTHBqaWphbmM/view
2. Downloading the programXiaomi Flashing Tool Miflash v2018.5.28.0 This portable version, you only need to unpack on drive C - Xiaomi Mi8 - MIUI firmware
3. Downloading the latest firmware version from the sectionMIUI 10 BETA recent global -> GLOBAL BETA
Fastboot version - Xiaomi Mi8 - MIUI Firmware (Dogsly Post # 74506282) (Extension of the file has to be .tgz)
Or from here -https://mirom.ezbox.idv.tw/en/phone/dipper/
4. Razarheviruem firmwareto drive C For example in my case
C: \ dipper_global_images_8.11.15_20181115.0000.00_9.0_global_362a4999b7
(In the attached picture, a screenshot and procedures)
5. RunMI-FLASH , Expose the bottom "Clean all " !!! IT IS IMPORTANT !!! can not stand "clean all and lock"
6. ClickSelect , choose C: \ dipper_global_images_8.11.15_20181115.0000.00_9.0_global_362a4999b7
7. Switch the phoneFastboot =>Turn off the phone, then we press the button " power on + volume down "Appears hare, and attach to a computer
8. InMI-FLASH and push refrash , The device will
9. Once again check that the exposed bottom "clean all "
10. Clickflash , Will the firmware - time about 5 minutes and it will be written success
11. Next, can be disconnected from the computer and wait for the first run and setTWRP => Xiaomi Mi 8 - Informal firmware (Post linuzzz7 # 79695774)
P.S. Return to the original MIUI stable version is carried out similarly!

Attached images
Attached Image


Post has been editedlinuzzz7 - 12.03.19, 17:31
Reason for editing: raised in the topic header



Rep: (59)
There are 2 variants
1. Installing from scratch
2. Upgrade the current version

Installing from scratch
1. Downloading the file from the version of investmentsTWRP_3.3.1 Android 10 / Q Support or newer version
2. Extract the folder inC: \ TWRP
3. Switch the phoneFastboot =>Turn off the phone, then we press the button " power on + volume down "Appears hare, and attach to a computer
4. Starting from the folderInstalTWRP.bat
automatic installation will be done, and restart in TWRP
!!! the latest version of swing there -Latest TWRP

Updating the current version
1. Downloading the latest version
2. Reboot into TWRP
3. sews a new version

Then you can put any custom
Installation instructions are available on the link kastomov -Xiaomi Mi 8 - Informal firmware (Post trenisk # 76984183)

Attached files

Attached fileTWRP.zip(30.87 MB)
Attached filePitchBlack.rar(34.86 MB)
Attached fileTWRP_unofficial_ Decrypt works.rar(31.61 MB)
Attached fileTWRP_3.3.1.zip(33.12 MB)
Attached fileTWRP_3.4.0-0.zip.(33.23 MB)
Attached fileOrangeFox-R10.1-Stable-Dipper.zip.(42.04 MB)
Attached fileOrangeFox-R11.0-Unofficial-dipper.zip.(41.71 MB)


Post has been editedlinuzzz7 - 28.09.20, 12:43
Reason for editing: updating information



Rep: (59)
Push installation Pixel Experience for Xiaomi Mi 8 (Dipper) - 2020/21/08
!!! Hyde covers installation from scratch, without saving the data, so make a backup of your computer files.
Page on XDA -https: //forum.xda-deve...el-experience-t3969169

At this point there are 2 nd main versions:
1. Android Pie - I put it
2. Android Pie (Plus edition) with additional features directed to customization.

Before installing the firmware:
1. You must have unlocked bootloader
2. Necessary Adb Driver -https: //drive.google.c...-YUEhzTHBqaWphbmM/view
3. Downloads the firmware itself -https://download.pixelexperience.org/dipper
4. Downloads TWRP (there are attachments)

Optional: need if you are having some problems are not typical, or want to completely reset the system, if there are any problems. It is recommended to establish through the MI-FLASH latest Global Beta MIUI, TWRP, and after this firmware PE
- InstallMIUI 10 BETA 9.6.27 - download => https: //bigota.d.miui...._global_30e0fc22ef.tgz
- InstallTWRP File attachments
1. Archive with MIUI 10 BETA 9.6.27 unpack to the C drive, then it will have to select
2. Download and unzip the MI-FLASH 2018-5-28 how to work with it, is described in detail by reference =>Xiaomi Mi 8 - Unofficial firmware
3. Switch the phoneFastboot =>Turn off the phone, then we press the button "turn the volume down +" appears hare, and attach to a computer
4. ThroughMI-FLASH 2018-5-28 set MIUI 10 BETA for Fastboot !!! do not forget to MI-FLASH choose "clean all" !!! can not stand "clean all and lock" !!!
5. After installation, translate phone againFastboot =>Turn off the phone, then we press the button "turn the volume down +" appears hare, and attach to a computer
6. We putTWRP_3.3.1 (there are attachments) - how to put TWRP => Xiaomi Mi 8 - Unofficial firmware

Installing firmware (TWRP you must be installed)
1. Reboot inTWRP
2. We doformat data => Wipe -> format data - writing yes . Go back to main menu and reboot in TWRP -> Reboot recovery
3. Wipe -> Advanced wipe ->select all (except USB) !!!
4. Connecting to a computer via a cord, with the company fill in the rootfirmware
5. Return to the main menu and reboot inTWRP -> Reboot recovery
6. Go to the menuInstall - choose PixelExperience_dipper-10.0 ... and svaypaem "Swipe to confirm Flash "
7. After the EEPROM HitWipe cache / davlink , Doing " Swipe to Wipe "And click reboot system

Additions:
1. If you need to change management with gestures to another
Settings ->System ->gestures ->Navigation system

2. Set up Google Pay
!!! In the latest versions of the firmware, these actions are not required, Google Pay works out of the box. Just install Google Pay from the market
1. Google Pay shutters in the Market
2. swing with Magisk + MagiskManagerhttps: //forum.xda-deve…al-systemless-t3473445
Or direct links, and throw in the root
- Magisk 21.0. - https://github.com/top...isk/releases/tag/v21.0.
- MagiskManager 8.0.3. - https://github.com/top...giskmanager-v8.0.3.apk.
3. Reboot in TWRP Put Magisk 21
4. Reboot to the system, put MagiskManager 8.0.3
5. Go to the root MagiskManager hide from Google Pay
6. reloaded into TWRP and putgpay-db-mod - have attachments
7. Boot the system and set up a payment

3. Enable developer mode
Settings ->About phone ->in the bottom of the "build number" press 5 times on it.

4. If not allowing Instagram or other applications from PlayMarket
Downloading the apk file, for example the link below
https://apkpure.com/

5. To extend the battery life, you can put MiPa Kernel
Official page -xda-developers.com
Mipa Kernel V9.9 Direct links:
Download link ->https: //sourceforge.ne..per_v.9.9.zip/download
Installation is made through TWRP, then Reboot, then Magisk

6. Cameras from other vendors
!!! carefully read the description
https: //www.celsoazeve...android/google-camera/
You can put from BSG - https: //temp2-f.celsoa...m1/mgc_7.4.104_v0a.apk.

Attached images
Attached Image
Attached Image
Attached Image


Attached files

Attached filegpay-db-mod.zip(4.27 KB)
Attached fileTWRP_3.3.1.rar(31.65 MB)
Attached fileTWRP_3.4.0-0.zip.(33.23 MB)
Attached fileMagisk-v21.0.zip(5.91 MB)
Attached fileMagiskManager-V8.0.3.apk.(3.01 MB)


Post has been editedlinuzzz7 - 17.11.20, 08:30
Reason for editing: Actual instruction from 24.10.2020



Rep: (43)
There was a camera with a telephoto switch to long press on the shift of cameras but kastomov I PE gives an error

Attached images
Attached Image


Attached files

Attached fileMGC_6.1.021_MI8_V1d_fu24-01f.apk(99.41 MB)


Post has been editeddenlisbk - 14.12.18, 14:49
Reason for editing: 1



Rep: (769)
Aicp pie Edition 14
Download



Rep: (89)
Remove rattle notification Viper FX to any AOSP firmware


Montrovat vendor in TWRP then removed through conductor TWRP:
/vendor/lib/soundfx/libvolumelistener.so and /vendor/lib64/soundfx/libvolumelistener.so

It was also observed that the viper2.5.0.5 It does not work properly. Effects do not apply to the energy saving mode. Part falls on \ off the slider to apply effects or convolver to apply effects to take effect. If you notice this same bug, it is recommended to install version 2.4.0.1. There, everything works like clockwork.

Post has been editedthe_virus_ua - 26.05.19, 11:35
Reason for editing: Fix



Rep: (59)
Install Havoc-OS v2.0 Official

Official page - https://sourceforge.net/projects/havoc-os/
Link to discussion on xda -https: //forum.xda-deve...pment/prepare-t3841106
Download the latest version - https: //sourceforge.ne...havoc-os/files/dipper/

Firmware upgrade
When you update the firmware before installing the update you want to removemagisk link to uninstaller - https://github.com/top...installer-20181208.zip
Update the firmware, download the axle and then sewmagisk 18 - https: //forum.xda-deve…al-systemless-t3473445

Actions before the firmware:
0. The phone needs to be unlocked bootloader !!! When loading label Unlock and open padlock
1. Backup all data on the computer !!!Sew necessary to complete cleaning !!! (Author's recommendation)
2. Must be installed TWRP, manual -Xiaomi Mi 8 - Unofficial firmware
3. Download Firmware - 9.1.17https: //drive.google.c...AxXETPllj8X4DbQKs/view
4. Download firmwarehttps: //sourceforge.ne...havoc-os/files/dipper/
5. Download Open Gapshttps://opengapps.org/- choose Arm64 + 9.0 + micro - file open_gapps-arm64-9.0-micro-20190129
6. Download Magisk v18https: //forum.xda-deve…al-systemless-t3473445

Firmware:
0. Reboot to TWRP =>Turn off the phone, then we press the button "Volume Up" + "Power Button" How will logotig Mi release the button and wait for the download TWRP
1. sews vendor =>Install , Select the file with the Firmware 9.1.17 And svaypaem "Swipe to confirm Flash "
2. We doformat data =>go in Wipe -> format data - writing yes . Go back to main menu and reboot in TWRP -> Reboot recovery
3. Net Forums =>Wipe ->A dvanced Wipe ->select all but System (and Persist one visible)
4. Put the firmware =>Install - choose Havoc-OS-v2.1-20190128-dipper-Official , Add franca Add more Zip and choose open_gapps-arm64-9.0-micro-20190129 and svaypaem "Swipe to confirm Flash "
5. After EEPROM HitWipe cache / davlink , Doing " Swipe to Wipe "And click reboot system
6. Configure system reboot in TWRP and sewsMagisk 18
7. Reboot to the system

Screenshots after the installation:

Posted 23/12/2018, 9:34:

Attached images
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image


Post has been editedlinuzzz7 - 29.01.19, 06:55



Rep: (325)
Attached Image
MIUI port chamber (ANX Camera)


It does not work on all firmware versions!
We discuss the events and pictures from it in this threadDiscussion camera Xiaomi Mi 8


Developer: XEonAX, Luffitys (alternate version)
Page fashionXDA
Source: GITHUB
How to install / download link
Important:
  • The firmware must be spelled out the possibility of work telephoto lens!
  • Namely: vendor.camera.aux.packagelist = com.android.camera in build.prop!
  • Need a last VENDOR! Works with 9.5.30 and above!
  • If you change the camera does not start fingerprint on mi8 or pixel using 3this instruction.

1. Download fromGithub, Github (Alternate Version)
2. Install the zip in Magisk (if it exists) or through TWRP (if not magisk).
3. Start to use.

Optionally, you can putrazblokirovschik 60 fps videoandmiui scanner for this camera.
Screenshots
Attached Image
Attached Image


Post has been editedthe_virus_ua - 20.06.19, 18:20
Reason for editing: update



Rep: (10)
If anyone needed, then came TWRP update from L.R Team, Room 1208

Attached files

Attached fileTWRP-3.2.3-1208-XIAOMI8-CN-wzsx150.zip(30.14 MB)



Rep: (59)
balalain2014 @ 02.01.19, 20:58*
So I can safely download mi unlock, and unlock again! But the question is why would I do that if the device is unlocked and so, although not to my account. I did everything exactly can unlock it again - but with your account, if need be!

If for some reason, when a failed firmware, or forget to put MI Flash an option and catch a brick, then he will not be able to unlock.
This is the only reason for the blocking and linking to your account is your machine (mi8) old phones do not count.
All instructions have a cap on TVRP firmware and custom firmware.

Post has been editedlinuzzz7 - 02.01.19, 22:04



Rep: (14)
* Luxuria_Cat ,
Luxuria_Cat @ 2.01.19, 19:44 *
Pre-configured Flash and Forget - this requires Magisk
Buttoned with AnyKernel2

And what's that? And how to use?



Rep: (9)
Hello! I have a problem. I put clean novoobnovlenny PE. Everything works, but no release in the face, and when you come in the first 5 seconds of the camera's fine, and then the program just Wisnu, and the camera shows is 3 fps ..



Rep: (1)
TheLogan @ 04.01.19, 05:11*
No release face

Franca put what? There's sort of just a nano or micro has smartlok


Full version    

Help     rules

Now: 13.12.20, 01:59