Assistant
We strongly recommend to readRules section "Android - firmware"
New threads need to be created only inroot partition! In the future, they will be processed by moderators.
REPLY |
Xiaomi Pocophone F1 - MIUI firmware |
Message#2 29.08.18, 19:34 | |
Whom [offline] Group: Banned Messages 7563 Check in: 15.04.17 Reputation: 1127 | Miui 9 9.6.18.0 Recovery -http: //bigota.d.miui.c...IFD_d0f8f81f64_8.1.zip Post has been editedJSPiRiT - 29.08.18, 19:38 -------------------- My Your Cavo. what |
Message#3 29.08.18, 19:40 | |
Guru [offline] Topics Curator Group: Curators Messages 9361 Check in: 17.03.12 Xiaomi Redmi Note 4X Snapdragon 3/32 Reputation: 2982 | |
Message#4 29.08.18, 19:41 | |
Whom [offline] Group: Banned Messages 7563 Check in: 15.04.17 Reputation: 1127 | |
Message#5 30.08.18, 08:40 | |
Whom [offline] Group: Banned Messages 7563 Check in: 15.04.17 Reputation: 1127 | Butanimation From global -PocoGLOBALBootanimation.zip(187.8 KB) From Indian -PocoINDIAbootanimation.zip(185.18 KB) -------------------- My Your Cavo. what |
Message#6 30.08.18, 12:41 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 560 Check in: 30.08.09 Xiaomi Mi 8 Reputation: 34 | Kernel sources https://github.com/MiC...urce/tree/dipper-o-oss -------------------- Nokia 5100>Siemens C65>SE K700i>Nokia E50>Samsung i900>Nokia E52>LG P500>Lenovo P780>Jiayu S3>Ulefone power>Xiaomi Mi 5S>Xiaomi Mi 8 |
Message#7 31.08.18, 08:17 | |
Guru [offline] Topics Curator Group: Curators Messages 9361 Check in: 17.03.12 Xiaomi Redmi Note 4X Snapdragon 3/32 Reputation: 2982 | Twrp 3.2.3.0 UNOFFICIAL. Only on unlocked bootloader! XDA Installation via fastboot. Downloadtwrp-3.2.3.0-beryllium-20180831_microSD.img(55.3 MB) Decoding scriptDisableForceEncryption_Treble_v17.2.zip(4.15 MB) Auto installer Instructions. Unzip the archive to the root of drive C in the adb folder (where the drivers are installed). Put the phone in modefastboot(at the same time we hold down the "Volume-" and "Power", we connect to the PC. In the folder, double-click on the Flash_twrp mouse, then follow the instructions. InstalTWRP.rar(27.38 MB) Temporary problem solving While TWRP does not work with encryption, by default it is enabled on miui, because of this, after the first installation, it does not see the internal memory, it sees the memory card and OTG. It is necessary to decrypt data, encrypted by default. First, download the firmware on the PC, Install TWRP, go clean - we do full wipes (caches, data, system, vendor) / reboot into recovery / again clean - data format, reboot again. Now you can download the firmware and the necessary files to the memory card in advance, or connect to the PC and reset the firmware, magisk, you can directly to the root, or create a folder, install. If you do not install magisk, or a decryption script, then TWRP will fly off, return to the drain and back up with data. Post has been editedvovcik3 - 23.09.18, 10:21 -------------------- Road going by walking. Curator 4 |
Message#8 31.08.18, 20:41 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 3938 Check in: 21.05.12 Samsung Galaxy Note9 Snapdragon Reputation: 413 | Can anyone see what file system is used on this phone? |
Message#9 31.08.18, 20:42 | |
Whom [offline] Group: Banned Messages 7563 Check in: 15.04.17 Reputation: 1127 | |
Message#10 31.08.18, 20:47 | |
Whom [offline] Group: Banned Messages 7563 Check in: 15.04.17 Reputation: 1127 | |
Message#11 01.09.18, 16:26 | |
Teamsavagemessiahzine.com [offline] Group: Curators Messages 6831 Check in: 31.07.12 Oneplus 5T 8/128 Reputation: 2220 | MiFlash in Russiancan be found here -Xiaomi Redmi Note 5 Global / Note 5 China - MIUI firmware (Post bullik01 # 76608776) Post has been editedbullik01 - 01.09.18, 16:26 -------------------- |
Message#12 02.09.18, 10:31 | |
Visitor [offline] Group: Active users Messages 19 Check in: 10.09.07 Sony Xperia C4 Reputation: 1 | JSPiRiT, on the screen you have the correct version, and hereXiaomi Pocophone F1 - MIUI Firmware (JSPiRiT Post # 76515239)not Post has been editedKhugoHada - 02.09.18, 10:43 |
Message#13 03.09.18, 18:31 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 562 Check in: 07.11.11 Apple iPhone SE Reputation: 168 | The region of India stood. Update 18 has arrived. Updated. Face iDi flew off, but the menu was not lost. Just had to register the person again. In the region of Russia, the input menu disappears. Post has been editedmax654 - 03.09.18, 18:32 |
Message#14 04.09.18, 00:00 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2777 Check in: 19.03.16 Xiaomi Mi Mix 2 Reputation: 1531 | |
Message#15 04.09.18, 14:13 | |
Whom [offline] Group: Banned Messages 7563 Check in: 15.04.17 Reputation: 1127 | MIUI GLOBAL BETA 8.9.4 -http: //bigota.d.miui.c...9.4_db2a7c3cf4_8.1.zip -------------------- My Your Cavo. what |
Message#16 04.09.18, 23:27 | |
Not Guru, just learning [offline] Group: Moderators Messages 6082 Check in: 07.03.11 Reputation: 1571 | |
Message#17 05.09.18, 13:00 | |
Not Guru, just learning [offline] Group: Moderators Messages 6082 Check in: 07.03.11 Reputation: 1571 | |
Message#18 05.09.18, 13:01 | |
Guru [offline] Topics Curator Group: Curators Messages 9361 Check in: 17.03.12 Xiaomi Redmi Note 4X Snapdragon 3/32 Reputation: 2982 | Installation instructions, backup, repair firmware in TWRP. The code name of our phone (Xiaomi Pocopfone F 1) -beryllium, check before downloading, and before installation, the zip name should beberyllium . Warning - after installing or updating the firmware, we are sure to sew the decryption script, otherwise data is encrypted.DisableForceEncryption_Treble_v19.0.zip(4.91 MB) Login to TWRP In any state of the phone- press together the power button and the sound + (plus), until the vibration and release. Section Information Boot- Boot kernel. Recovery- Recovery (installed by TWRP) System- System installed firmware. System Image (system.img)- System image in img format. It is not recommended to back up, and even more to restore, often the bootlap. Data- Installed applications, downloads, except for photos and music, are in the internal memory. Cache- Cache (remnants of programs, browsing, cached files, simple - garbage) Internal Storage- Internal memory (photos, music, downloads, etc.) Modem- Modem (responsible for communication, you can try to change - to improve communication). Cust- Section responsible for the regions. EFS- IMEI, MAC-addresses, SN devices (mostly backed up once and for all, while the phone is on hand). Persist- Various device sensors, also related to MI Account. Splash- Boot logo. Vendor- so let's say drivers, now rendered separately Vendor image- Vendor look Error codes, and their solution ERROR 7- one of the most common mistakes. It has many options 1. The firmware is not for your device, check whether the name of the zip is exactly beryllium. 2. Maybe with a swing with an error (the so-called broken file) - check for errors, siphon again. 3. May need more recent vendor (for custom firmware) 4. If everything is fine with the upper points - try changing TWRP to a fresher, more up-to-date one. Backup Be sure to remove any passwords, prints before backup!If you do not delete, when restoring, it will not let it into the firmware. In TWRP, select Backup, a menu will appear For a standard backup, system (firmware), data (installed applications, downloads, except for photos and music, are in the internal memory), boot (kernel), vendor (roughly - drivers) are enough. You can choose where to save, compress, set the password. All selected - svayp and wait. Switching to custom is carried out without restoring data, so if you need to save something and then restore it, use® Titanium Backup ,®Migrate , Mybackup ,Super Backup: SMS & Contactsor any other program. Photos, and music can be just on the PC. If you want to return - then backup in TWRP Firmware update from one command When updating the firmware from one command, wipes are not required, usually the formatting of caches and the system is registered in the script. But if you fear the old habit, then after flashing the wipe caches, it will be offered there. When updating the firmware, all changes to the system that were made (patches, custom kernel, etc.) will be deleted, reinstalled. Magiks (built-in auto update script) will remain. All data and applications will remain. After updating the official firmware, be sure to flash after the decryption script. Recommendations - Disable all Magisk modules before upgrading, they may often break or not at all update them, after upgrading it is better to turn on one at a time. Installing firmware Installing a new firmware is sure to clean. Download the desired firmware. You can throw on a memory card, USB flash drive, or PC (then transfer to the phone). We go to TWRP, do full wipes (system, data, internal memory, both caches), after rebooting into recovery, doing data format (to decrypt data, encrypted by default), reboot again. If there is a memory card, clean it also from the tails of the old firmware, the Android folder and Lost.Dir, MIUI (if any) in the TWRP file manager. Now you can proceed to install. Install, select the drive, find your firmware file, select. If you need root (® Magisk - The Universal Systemless Interface), or patches - then click to add. Files will be in the queue, all will be sewn at once. When installing custom firmware, you may need to still flash the vendor (lookHere) release date - not lower than recommended by the author. Plus if you need GApps (google apps) we takeHere, choose ARM64 according to the version of android, the package is optional (you can find out the package by clicking on the green square next to the name. In some firmware they may already be embedded, see the description. TWRP update and kernel installation (boot) You can update or install a new one in TWRP itself, go to Installation, at the bottom right click img (TWRP files and cores go in img extension), find your file, select, swipe. After installation, it will reboot into recovery, and set up a new one. We are also flashing the kernel, only loading it immediately into the system. How to add internal memory to backup XDA It is installed as an ordinary arch, carefully read the instructions. When you turn on the usual data wipe, it will erase all the internal memory, it is better to turn it off in the utility after backup. tipatch-app-v1.4.apk(2.17 MB) If not allowed in firmware, requires a password Stock recovery If flew TWRP - but remained root If after any action TWRP has flown down, but it remains root - you can use the utilityFlashify Full _for root users_ v1.9.2_Rus.apk(12.23 MB) Post has been editedvovcik3 - 29.03.19, 08:04 -------------------- Road going by walking. Curator 4 |
Message#19 05.09.18, 14:14 | |
Rw [offline] Group: Friendssavagemessiahzine.com Messages 4012 Check in: 06.10.14 Pocophone F1 6/64 Reputation: 2729 | Instructions for beginners / beginners to check the bootloader and install custom recovery through fastboot and ..... All instructions in this post for unlocked bootloader Please do everything as in the instructions, without adding gag, before starting work, before installing the drivers and later, before working with the bootloader, I recommend restarting the computer and smartphone. Driver installation and connection check We go to the settings-about the device-tap according to the version of MIUI, until it registers that you became a developer. Further settings-extra-for developers (developer mode) we look to enable factory unlocking and USB debuggingYou can also see the bootloader unlock status (the easiest way), sometimes the item may differ slightly, instead ofBootloader status-Unlocked m. Lock open (unlocked) or closed (locked)And even as a precursor of an unlocked bootloader when the device is loaded before the boot animation, under the MI icon there should be an inscriptionunlocked Note, it is desirable to connect the cable from the phone to the computer from the "back" side (from the motherboard side), there are people who have the front side defined in the controller and in the MTP mode, but with commands via fastboot, which we will use below, sends computer mother. 1. Download the archive with adb-hereand unpack, preferably on the C drive (I call the folder in Latin, without spaces or dashes) I did 2. Transfer the phone to fastboot (power button + volume minus, until the green robot android appears, with the inscription FASTBOOT) and connect it to the computer. 3. Check (for example, windows 7), go to the Control Panel — all the device manager programs should be, without question marks, if the question mark is downloading driversheredepending on your system (32/64) 4. Next we go to the folder with adb and the shift combination + right mouse button- a window will appear select Open command window (it may not always work the first time) AppearIf you have a 10th Windows we doSo 5. To check that our device was defined, we enter a command, for a start fastboot getvar product fastboot devices If our device is determined, enter the command fastboot oem device-info Installing the drain via Fastboot 1. Preparation: we look at the first instruction spoiler completely, i.e. prepare adb folderdownloadarchive, check the bootloader and drivers 2. Download the official firmware, look hereherewe look through to our device, todaydownload. 3. Unpack (double unpack) and transfer files from the unpacked folder to the folder with ADB, should look like 4. We transfer the device to the fastboot mode (power buttons + volume minus, until the green robot appears) connect to the computer, and presswhere we choose one of three batch file: Green-firmware install cleanly, tz "plant" all data is deleted the system and the data is reformatted, the bootloader will remain open Blue- System partition is reinstalled as a “factory”, but user data will not be erased (photos, game applications, etc.), the bootloader will accordingly remain open Red - firmware install on clean, tz. "plant" all data is deleted system and data is reformatted, bootloaderCLOSED / LOCKED. P.S. There are various circumstances when you need to flash the device via fastboot, I’m doing it on the "old memory" periodically in order to "reset" the phone, sometimes there are glitches that can only help with firmware via fastboot. Install TWRP Before starting the procedure, I suggest that you familiarize yourself with the first spoiler instructions andBe sure to transfer all the necessary data to the computer, you never know how it will go.. Immediately a reservation, if you put TWRP on the official firmware, so as not to fly to the stock, you must sew a desphratorDisableForceEncryption_Treble_v18.0r2.zip(4.13 MB) TWRP official websitehere, unofficial TWRP can be downloaded in the topic header. Ready auto installer. Download InstallerInstalTWRP.rar(33.68 MB) unpack and drop on the C drive (desirable), transfer the phone to Fastboot mode (hold down the power button and volume minus at the same time, it doesn't matter if it is turned off or on), connect the installer folder to the computer and double-click on Flash_twrpNext to install, enter the number 1 and press ENTERThe installation of TWRP will begin and after a few seconds the device will reboot into TWRP itself. For the future, you can download any TvRP, throw it into the folder with the auto-installerIf you ask for a password when entering TvRP, click Cancel and try to flash through the memory cardDisableForceEncryption_Treble_v18.0r2.zip(4.13 MB) and pervruzhitsya in tvrp. If this procedure does not help and TvRP does not find the internal memory, you need to format the data section, while all data will be erasedand install the magisk if, when booting into the system, the device hangs on the MI logo. On official firmware, most likely it will be so, on localized and unofficial this will not happen. P.S. If after installing the PC does not see the phone in TWRP mode, restart and TWRP to TWRP Deleting passwords / fingerprints (pin graph) All informationhere Return to stock with OTA without data loss For those who want to return the OTA after flashing the SU / Magisk custom recovery, and generally decided that this is not his, but the unlocked bootloader wants to leave just in case. My example, I stitched the developer (it is possible and stable), but in order not to lose data, from the previous firmware or from another phone, I patched the custom recovery, then I patched Magisk, I restored the application data using Titanium backup. Further.. 1. We are loading into TvRP and deleting Magisk, the uninstaller can be taken in the Magisk branch 2. From TWRP we boot into Fastboot, connect it to the computer, go to the folder with the firmware, which for fastboot / Miflash>>the images folder we find the recovery file there, we copy it to the folder with the firmware or to the folder with adb, which is at hand. 3. From under the folder where you copied the recovery with a combination of Shift buttons + right mouse button - open the command window and prescribe fastboot flash recovery recovery.img Note: if you deleted the system apk or other files, before returning to the stock condition, I highly recommend wiping both caches and flashing the firmware that you currently have, naturally, the firmware is needed for recovering with the zip ending. Installing firmware / cleaning, etc. working with TWRP Not a big preface: If during the use of the firmware, some fixes, kernels were not installed correctly, something was deleted in the system, because of this, errors, glitches, or the device did not boot into the system, etc., download the firmware that You are now on board, for recovery, we throw it into the phone, wipe both caches and flash the firmware, everything should work, except that different modes, custom kernels and other "uluchalki" will be removed to restore the system as you had before. .. without flashing firmware from the top, you need to make a Backup from to d TWRP For starters, for convenience, we will translate into Russian as in the screenshots 1. Next, before sewing another firmware, we do the cleaning, there are two ways a) Complete cleaning with data formatting (for me the best way) Go to p. Cleaning>>Formatting data>>in the line we write YES and a tick as onIt is necessary to understand that with this method all data is deleted, so transfer data to another medium in advance (card / OTG / comp) b) With this method, we do not touch the internal memory (if laziness, if it is not possible to transfer data to another medium), then immediately go to section>>Selective cleaning>>select items / Dalvik / ART Cashe / System / Data / Cashe>>Swipe for cleaningWith this cleaning, I recommend to delete two folders Android and Miui. for this we go to p. Advanced>>Conductor>>sdcard>>Android>>checkmark in the bottom right corner>>Delete>>Swipe to confirm again in>>sdcard>>MIUI>>checkmark in the bottom right corner>>Delete>>Swipe for confirmation 2. a) Install the firmware. After the Cleaning procedure, I recommend to reboot into TWRP, then go to p. Installation>>Select the folder where you downloaded our files (in my case, the Download folder, select the Firmware (symbol), if you want to add so-called. Google apps for joint firmware (usually not bundled with custom firmware), then click on Add more zip (you can add up to 10 zip) choose Gapps and Swipe for firmware b) Update via TWRP. There are two ways to "dirty roll" and update with wipe. When dirty, just go to the folder where our firmware is downloaded, tap it and swipe for the firmware, the second way, before updating, go to Cleanup and select as in the screenshotAfter we go to the folder where our firmware is taped and if it was installed for example supersu We add another zip and select the file supersu (This is done because with the wipe the cache will fly off everything that was added by the mods not embedded in the firmware) In the same way we can, through TWRP, separately to the firmware, you can sew mods, fixes, etc. In case you did not backup the firmware and thanks to fashion, fix, etc. the phone does not boot (often hangs on the MI logo), you can artificially reboot into rekoveri (power button + volume plus, to the victorious "), make wipe cache and flash our firmware with a new one, in this case 99% of the firmware will safely boot, thus avoiding data loss Backup via TWRP Create backup.Boot into TWRP>>Backup>>We select partitions for backup (I do only those that are ticked by me, you can do a full one), you can immediately choose a drive where the backup will be made>>Svayp for a start, now you need patience until a backup is made. Recovery. Before restoring, I recommend transferring the backup to a card or to another medium, then do ashereorherein the second case, respectively, the backup will remain in the internal memory of the phone. Next n. Recovery>>The choice of backup, their m. several, each one contains the date and name of the firmware, immediately the choice of media from where the backup will be restored>>Selection of sections>>Swipe for recovery. If there are errors, glitches and other delights, reinstalling TvRP and firmware does not help, I recommend "resetting" the phone with the firmware of the drain via fastboot, followed by, if necessary, installing TvRP and local / custom firmware. If you find flaws or osh Post has been editedFRust79 - 20.03.19, 13:41 -------------------- All that I write is my personal opinion, that is, it strenuously confirms that this opinion is mine as an author and it is not connected with official or other interpretation. |
Message#20 07.09.18, 11:31 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 192 Check in: 24.06.14 Xiaomi Redmi Note 4 3/32 Reputation: 30 | And who knows why 4 days ago on the site en.miui.com was firmware 9.6.18, and then it was deleted and left 9.6.14? I do not know why but firmware 9.6.18 is excellent, the speed of work is much better than 9.6.13 (there were some micro-freezes in this one), the autonomy is chic, in antutu it gains a little more than 9.6.13 - 265600 against 262200 |
Message#21 07.09.18, 20:34 | |
Novice [offline] Group: Active users Messages 37 Check in: 08.02.16 Google nexus 5 Reputation: 1 | How to flash TWRP on Windows 10 x64? |
mobile version | Now: 04/03/19, 02:25 |