[X]Assistant

[washerron]

Magisk Module Collection

Magisk talk | Talk modules for Magisk | GitHube selection | Compilation on XDA

Before installing modules for Magisk, make a nandroid backup in order to protect the device from flashing and data loss! All that you bet, you bet only at your own peril and risk!

Theme Rules

1. The topic is intendedonlyfor publicationready modulesfor Magisk.Any questions and discussions are prohibited and punishable.Discussion of the work of Magisk and modules is conducted in the profiletopic. If you have a question / comment to any post, write it to the author in QMS.
   
2. All new modules are published in this topic.on a ready-made template.Non-template publications are deleted without warning. Screenshots need to be hidden under the spoiler.
   
3. Procedure before publishing a new module:
   - Be sure, using the search on the topic, check if this module has not been published here before. If the module has not yet been published, arrange your post on the template adopted in the topic (see. Below).
   - If you publish a new (updated) version of the module and are NOT the author of a post with a previous version, then next to the module name, be sure to indicate: “update” and give a link to the original post.
   - If you publish a new (updated) version of the module and are the author of a post with a previous version, simply update (reload) the content in that post and create a message in the subject with information about the update and a link to your post with the module.
   
4. Dear developers, patch and moduladela note that this topic is not a platform for testers. Herealready proven are publishedand closer to the stable version.
   
5. Systemless fonts are published in the next topic вћњFont replacement
   

пїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅ пїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ download

Copy the content into your message and fill

[size = 3] [color = crimson] [b] Full module name [/ b] [/ color] [/ size]
[size = 2] [b] version: [/ b] [/ size] Version number, release date

[b] [COLOR = teal] Developer: [/ COLOR] [/ b] specify the name (nickname) of the author (you can link)
[b] [COLOR = teal] Homepage: [/ COLOR] [/ b] specify the link to the page (if any), or the link of the topic is not a magic program (for example, ViperFX, Greenify, etc.)
[b] [COLOR = teal] Xda: [/ COLOR] [/ b] indicate the subject of the module on XDA (if there is one)
[b] [COLOR = teal] Link to the original post: [/ COLOR] [/ b] (if you are publishing a new version of the module and are not the author of a post with a previous version; otherwise, remove this line from the template)
[B] [COLOR = teal] Russian interface: [/ COLOR] [/ B] Yes / no
[b] [COLOR = teal] Technical requirements: [/ COLOR] [/ b] if available, indicate the required version of Android, Magiska; specify the required firmware or device brand, if there is such a restriction; specify.
[b] [COLOR = teal] Job description, functionality: [/ COLOR] [/ b] indicate the main functions performed by the module, as well as the features of working with the module, if any

[spoiler = [b] [COLOR = Teal] Screenshots [/ COLOR] [/ b]] pictures

[/ spoiler] [spoiler = [b] [COLOR = teal] What's new [/ COLOR] [/ b]] [list]
[*] CHANGELOG (if you publish a new (updated) version of the module; otherwise, remove this line from the template)

[/ list] [/ spoiler] [b] [color = blue] [size = 2] Download: [/ size] [/ color] [/ b] the archive file itself
[spoiler = [COLOR = Teal] Past versions [/ COLOR]] [list]
[*]
[/ list] [/ spoiler]

What does the template look like

Full module name
version:Version number, release date

Developer:specify the name (nickname) of the author (you can link)
Homepage:specify the link to the page (if there is one), or the link of the topic is not a magic program (for example, ViperFX, Greenify, etc.)
Xda:we indicate the theme of the module on XDA (if there is one)
Link to the original post:(if you are publishing a new version of the module and are not the author of a post with a previous version; otherwise, remove this line from the template)
Russian interface:Well no
Technical requirements:if available, specify the required version of Android, Magiska; specify the required firmware or device brand, if there is such a restriction; specify.
Job description, functionality:indicate the main functions performed by the module, as well as the features of working with the module, if any

Screenshots

Pictures

What's new

• CHANGELOG (if you are posting a new (updated) version of the module; otherwise, remove this line from the template)
  
  

Download:archive file itself

Past versions

• 
  

useful links

• How to install Magisk modules
  
• 
  

• Alphabetical Module Catalog
  
• Magisk font collection
  
• Collection of modules many outdated versions

Post has been editedwasherron - 23.03.19, 23:17

Reason for editing: Amendments

[PalychRv]

Detach
Detach Market Links for Theme Ready Apps *
version:v2.6.4 11/03/2018

Developer:hinxnz rom
Homepage: XDA
Russian interface:Not
Technical requirements:Magisk 17+, all Android / Devices / Archs supported
Job description, functionality:Module to disable PlayStore updates for specific applications.

Installation and Setup

• 1) DownloadDetach_Magisk.zip, detach.txtanddetach.custom.txt.
  
• 2) detach.custom.txtrename todetach.custom.
  
• 3) detach.txtanddetach.customMove to the root of the memory card (sdcard) or internal storage.
  
• 4) Indetach.txtSelect the application you need and remove the comment - delete the "#" sign.
  
• 5) Install the moduleDetach_Magisk.zip.
  

detach.txt- The main list of applications to disconnect from Google Play.
detach.custom- the file for your list of applications that are not in the main list - here we add the applications we need.

Screenshots

What's new

• CHANGELOG:
  v1.0
  - Initial release
  v1.1
  - Changed detach method
  v1.2
  - Disabled service for database
  v1.3
  - Bug fixes
  v1.4
  - Added static sqlite binary
  v2.0
  - Added the apps to detach with configuration txt file (optional)
  v2.1
  - Cleaned up installation script
  - Added mod removal option
  v2.2
  - Magisk compatible (systemless installation)
  - SuperSU systemless mode compatible (systemless installation)
  - Fixed init.d detection
  - Fixed market links reappearing
  - Updated detach.txt (added Wallpapers, Pixel Launcher, Capture (GoPro))
  v2.3
  - Updated script and detach.txt (added Gboard, Clock, Camera, Google Connectivity Services, Google VR Services, Google Play Services)
  v2.4
  - Updated script and detach.txt (added Google Carrier Services and the ability to add custom packages)
  v2.5
  - Fixed market links reappearing
  v2.6
  - Main script updated for removal process
  - Disabled code for playstore
  - Removed Contacts, Phone and Photos from default install
  20181106:
  - Detach.txt file detection improvments
  - detach.custom file detection improvments
  - better compatibility with iYTBP (continue necessary)
  
  

Download: Detach_2.6.4_Magisk_17 + .zip(1.14 MB)

detach.txt(419 bytes)

detach.custom.txt(2 bytes)

Filedetach.custom.txt rename to detach.custom (the site was not allowed to fill in on another!)

Past versions

• 
  

P.S. If suddenly the module is not working or is working crookedly, use Auto_Detach .

Post has been editedPalychRv - 20.12.18, 01:32

Reason for editing: P.S. "If a friend happened suddenly"

[Andrwolf]

Auto_Detach
version:no version, release date: 11/14/2018

Developer: djparent
Homepage: XDA

Russian interface:no interface - this is a service (script).
Technical requirements:the presence of rut.
Job description, functionality:This is an additional service for the module.Detach magisk-Who someone periodically appears in the play market the item about updating YouTube (or another program) when the Detach module in the Magisk Manager is properly configured and properly configured, the author (or one of them) on Xda has publishedscript as an applicationTo solve this problem, it is necessary to provide the root program with rights and give exceptions in order for it to work in the background.

Download:
Auto_Detach.apk(2.8 MB)

p.s. - this is not a module, but an application - but still for the Magisk module as well.

Post has been editedwasherron - 17.11.18, 19:41

Reason for editing: Amendments, links

[washerron]

ViPER4Android FX
version:v4.2 of 05/04/2019

Developer:ViPER520, ZhuHang, Ahrion, Zackptg5
Homepage: http://vipersaudio.com/blog/
Our main theme is: 4
Neighbor theme
Open source code
Russian interface:Yes
Technical requirements:
- Android Gingerbread +
- all devices with Root rights (requires init.d support if magisk or supersu are not used. Try Init.d Injector)
Job description, functionality:Global system equalizer for the entire device with many features. Support for enabled Selinux (enforcing mode).

Screenshots

In the main topic

What's new

• v4.2
  - Update to Unity v4.1
  
• v4.1
  - Make app open / close / fc workaround optional
  - Added mtk sepolicy
  - Misc unity bugfixes
  
• v2.3
  Unity v2.2 update
  
• v2.2
  Fix uapp / sapp zipname trigger
  Fix lib workaround
  Update to Unity v2.1
  
• v2.0
  Unity v2.0 update
  Fixed limitation in zipname triggers - you can use spaces in the zipname now
  Fixed boot boot script for some users
  Fix fix bootloop issues
  Removed really old stuff
  
• v1.8.2
  - Add usb audio fix- donjoe0 - @ xda-developers
  
• v1.8.1
  Add libstdc ++ workaround for pixel 3 and 3xl

Download:
ViPER4Android_FX-v4.2.zip(15.36 MB)

Past versions

• ViPER4Android_FX-v2.3.zip(17.48 MB)
  
  
• ViPER4Android_FX-v2.2.zip(16.96 MB)
  
  
• ViPER4Android_FX-v2.0.zip(18.07 MB)
  
  
• ViPER4Android_FX-v1.8.2.zip(17.47 MB)
  
  
• ViPER4Android_FX-v1.8.1.zip(16.36 MB)
  

Post has been editedwasherron - 10.05.19, 10:28

Reason for editing: New version

[PalychRv]

Energized вљЎ Protection - MagiskUpdate:
version:v.flaky 12/08/2018

Changelog:

v.flake

• - Added Magisk 18.0+ Systemless Hosts Support
  - Fixed Update Checking Issue.
  - Improved Script Quality.

Post has been editedPalychRv - 08.12.18, 22:35

[rusya77]

Russian translation forViper4AndroidFX1.8.2

Screenshot

ViPER4Android_FX-v1.8.2.zip(15.73 MB)


Post has been editedrusya77 - 09.12.18, 20:19

[tugo.vhodit]

MaudViPER4Android FX
Languages ​​only English, Russian, Ukrainian.
Translation fromKutep0v Raise Kutep0v's reputation

ViPER4Android_FX_Legacy-v4.3-signed.zip(15.47 MB)

Past versions

ViPER4Android_FX-v4.3-signed.zip(15.47 MB)
ViPER4Android_FX-v4.2-signed.zip(15.47 MB)
ViPER4Android_FX-v4.2-signed.zip(15.47 MB)
ViPER4Android_FX-v4.1-signed.zip(15.47 MB)
ViPER4Android_FX-v4.0-signed.zip(15.5 MB)
ViPER4Android_FX-v4.0-signed.zip(15.47 MB)
ViPER4Android_FX-v4.0-signed.zip(15.5 MB)
ViPER4Android_FX-v3.4.2-signed.zip(19.04 MB)
ViPER4Android_FX-v3.4.1-signed.zip(19.04 MB)
ViPER4Android_FX-v3.4-signed.zip(19.05 MB)
ViPER4Android_FX-v3.3-signed.zip(19.38 MB)
ViPER4Android_FX-v3.2-signed.zip(19.38 MB)
ViPER4Android_FX-v3.2-signed.zip(19.72 MB)
ViPER4Android_FX-v3.1-signed.zip(19.7 MB)
ViPER4Android_FX-v3.0-signed.zip(19.69 MB)
ViPER4Android_FX-v2.4-signed.zip(17.03 MB)
ViPER4Android_FX-v2.3-signed.zip(17.93 MB)
ViPER4Android_FX-v2.2-signed.zip(17.41 MB)
ViPER4Android_FX-v2.1-signed.zip(17.4 MB)
ViPER4Android_FX-v2.0-signed.zip(18.51 MB)
ViPER4Android_FX-v1.8.2-signed.zip(17.58 MB)

Post has been editedtugo.vhodit- Today, 06:37

Reason for editing: New version

[PalychRv]

LKT в„ў | High performance & Power saving tweaks for all device
version:v1.6 (03/23/2019)

Developer: Mar koulache - korom42
Homepage:
Xda:module topic onXDA
Russian interface:Not
FAQmodulo
Technical requirements:

• An android device
  
• Magisk 17+ or SuperSU or init.d support
  
• Busybox
  
• Android Terminal Emulator
  

Job description, functionality:
LegendaryKernelTweaks -LKT в„ўseeks to achieve a balance between power consumption and performance.

More details

What is LKT в„ў?
At first glance, you might think that this is another BS tweaks collection .. Well, then think again.
But most universal placebo tweaks either do more harm than good. Right?! Actually it is true.
But what separates LKT from the crowd is the versatility and at the same time the specificity of the device.
Let me explain. Using simple functions, LKT detects the hardware of your device, then applies the appropriate changes.
This would not have been possible without the help of the WIPE project participants, who provided interactive configurations of the regulator for all major platforms (Snapdragon, Helio, MediaTek and Intel Atom) covering hundreds of devices. These settings have been tested and can withstand up to 12-14 hours SOT without any compromise in performance, everything is as smooth as a child’s ass.
However, it should be noted that this does not apply to games, intensive use of cameras, etc.
Nothing can be done for anything that is an automatic battery killer and requires maximum use of resources at any time.

Features
LKT strives to achieve a balance between power consumption and performance.
Compared to manual parameter settings, LKT perfectly accepts the open source Project WIPE parameters for all major SOCs that are generated through machine learning (A.I) and can be adapted to different styles of workload sequences. This idea is similar to EAS, which takes into account both performance and energy costs through energy consumption patterns and workload consistency, but obviously, EAS has a much shorter response time and replaces customization with decision logic.
In addition, LKT also includes other settings, such as HMP parameters, Virtual Memory, GPU, TCP, I / O scheduler and doze, to combine the rest of the environment for more consistent work.

Installation:

• Flash to TWRP or Magisk Manager
  
• Follow the installer instructions.
  
• Reboot
  
• In Android Terminal Emulator Enter commands and customize as desired:
  
  su
  lkt
  To change the profile you need to enter the corresponding number from the columnLKT PROFILES -This number is indicated in[ ]as an example:
  to activate the Turbo profile, you need to enter in[+] Your Input -number four (4), and press enter.
  Or enter the appropriate number, sign, combination to activate the item from the sectionOTHER OPTIONS -
  

**Setting to pure ROM is preferred.
**No other similar mods, Tweaks (NO AKT, NO HELIX ENGINE, NO L SPEED & ABSOLUTELY NO NFS !!)

Compatibility:

• Intel Atom (Z3560-Z3580)
  
• Kirin 970 (Huawei)
  
• Kirin 960 (Huawei)
  
• Kirin 950-955 (Huawei)
  
• Kirin 650-655-658-659 (Huawei)
  
• Helio x20-x25 (MT6797-MT6797T)
  
• Helio x10 (MT6795-MT6795T)
  
• Helio P10 (MT6755)
  
• Exynos 9810 (Samsung)
  
• Exynos 8895 (Samsung)
  
• Exynos 8890 (Samsung)
  
• Exynos 7420 (Samsung)
  
• Snapdragon 845
  
• Snapdragon 835
  
• Snapdragon 820-821
  
• Snapdragon 810-808
  
• Snapdragon 801-800-805
  
• Snapdragon 660
  
• Snapdragon 652-650
  
• Snapdragon 636
  
• Snapdragon 625-626
  
• Snapdragon 615-616
  
• Snapdragon 450
  
• Snapdragon 435
  
• Snapdragon 430
  
• Snapdragon 425
  
• Snapdragon 410-412
  
• Snapdragon 400

How to check what works and works?
After installing the module and rebooting, go along the path and look at the file/data/LKT.prop (sample file is in the screenshots) .

Starting with version 1.3.9LKT в„ў purchased interface.

After installing the module and rebooting, open the Android Terminal Emulator and enter successively commands; and customize:

su
lkt

Do not forget that we put every module of our own accord, and the responsibility lies only with us: shok:

Screenshots

What's new

v1.6 (03/23/2019)

• Responsiveness enhancements for EAS
  
• Fixed lockscreen stutter / lag issue
  
• Increased wait time to boot conflicts
  
• Many bug fixes and code optimizations

Changelog older versions:

v1.5.2 (11/03/2019)

• Disabled GPU thermal restrictions on Mediatek SoCs
  
• Various fixes and CPU enhancements for Mediatek SoCs
  
• Removed zRAM (SWAP) configuration
  
• Other minor changes & enhancements
  
• Bug fixes

NOTE Flash the LKT + zRAM Manager addon to enable / disable SWAP.

v1.5.1 (08/03/2019)

• Bug fixes

v1.5.0 (06/03/2019)

• EAS fixes and performance improvements
  
• Added GPU enhancements
  
• Storage scheduler enhancements
  
• Memory management enhancements
  
• Enabled & configured swap for better multitasking and performance
  
• Other minor changes & enhancements
  
• Bug fixes

v1.4.9 (09/02/2019)

• Memory management adjustments
  
• For some devices
  
• Added back deep-sleep enhancements props
  
• SWAPs / zRAM are no longer disabled
  
• Auto-detect existing profile when upgrading (user interaction is not needed anymore)
  
• Minor bug fixes

v1.4.8 (05/02/2019)

• Increased delay after boot
  
• Bug fixes

v1.4.7 (04/02/2019)

• EAS profiles fixes
  
• CPU boost fixes for some devices
  
• Memory management enhancements
  
• Removed tweaks
  
• Bug fixes

v1.4.6 (02/02/2019)

• Important bug fixes
  
• zRAM is not tweaked anymore and left for the kernel (only disabled for devices + 6GB RAM)

v1.4.5 (01/02/2019)

• Re-worked EAS profiles
  
• Prefer schedutil on EAS kernels
  
• Added CPUSET optimizations
  
• Added schedtune optimizations
  
• Added control groups (CGroups) optimization
  
• Enabled zRAM for 4GB RAM devices
  
• Enabled & adjusted Low memory killer
  
• IO block tuning enhancements
  
• FileSystem (FS) enhancements
  
• Enabled Fast Dormancy (may help with cellular network idle drain)
  
• Major bug fixes

v1.4.4 (19/01/2019)

• Unity template update 3.2
  
• SoC detecion enhancements
  
• Increased delay at boot before applying tweaks to 1 min
  
• Minor enhancements
  
• Bug fixes

v1.4.3 (1/16/2019)

• Unity template update v3.1
  
• Fixed LKT profile not sticking after reboot
  
• Added ability to change profiles with simple commands (useful for tasker)
  • lkt1: for battery profile
    
  • lkt2: for balanced profile
    
  • kt3: for performance profile
    
  • lkt4: for turbo profile
• Improved EAS tweaks for non sd845 devices
  
• Improved compatibility for custom kernels
  
• Removed Low Memory Killer tweaks
  
• Swapping is no longer disabled for devices less than 4GB RAM
  
• A ton of fixes

v1.4.2 (01/01/2019)

• More bug fixes

v1.4.1 (01/01/2018)

• Fixed some bugs after last update

v1.4.0 (01/01/2018)

• SoC detecion enhancements
  
• Bug fixes

v1.3.9 (29/12/2018)

• Added command line controls
  
• Now LKT perefers interactive if kernel has both schedutil & interactive
  
• Less aggressive LMK
  
• Fix boot for some devices
  
• Other minor changes & fixes

Screen terminal terminal terminal

v1.3.8 (27/12/2018)

• SoC detection issues fixes for samsung & other devices

v1.3.7 (27/12/2018)

• Fixed system crash & logs after last update
  
• Other minor changes

v1.3.6 (27/12/2018)

• Fixed soc.txt file not being created when SoC detection fail
  
• Added new wakelocks to block
  
• Adreno Idler parameters changes
  
• Reduced delay at boot
  
• Other minor changes & fixes

v1.3.5 (26/12/2018)

• SoC detection issues fixes
  
• Reduced entropy values
  
• Other minor changes & fixes

v1.3.4 (24/12/2018)

• Added support for snapdragon 4xx series
  
• Added support for Helio P10 (MT6755), kirin655, kirin658, kirin659
  
• Fixed LTE Signal Bug
  
• Fixed some parameters not being applied
  
• Fix bug for snapdragon 660
  
• Added device support check in logs
  
• Unity template update 2.2
  
• Script improvements
  
• Bug fixes

v1.3.3 (23/12/2018)

• EAS parameters adjustments
  
• Reverted HMP scheduler changes
  
• Fixed RAM capacity & CPU frequency not displayed in LKT.prop
  
• Bootloop bug fix
  
• Scrolling bug fix
  
• Crashing apps fix
  
• Other minor changes & fixes
  

v1.3.2 (22/12/2018)

• Minor installation bug fixes

v1.3.1 (22/12/2018)

• EAS tuning for back up devices (manual parameters - not WIPE)
  
• EAS parameters adjustments
  
• HMP scheduler adjustments
  
• Updated RAM detection method
  
• Memory management fixes
  
• LMK enhancements
  
• Added Lazyplug tunning
  
• Removed busybox check
  
• Module template updated to latest UNITY 2.1
  
• Module installation fixes
  
• Other minor changes & fixes

v1.3.0 (12/19/2018)

• Fix for some devices
  
• Added support for sultanxda cpu boost implementations
  
• Updated to latest UNITY template 2.0
  
• Bug fixes and refinemetns
  
  v1.2.9 (12/18/2018)
  Important chip detection fixes
  Improved swap detection & removal
  Minor bug fixes
  
  v1.2.8 (12/18/2018)
  Bug fixes for manual chip detection workarround
  
  v1.2.7 (12/18/2018)
  Minor fixes
  
  v1.2.6 (17/12/2018)
  Added manual workarround for devices with unrecognized chip (Huawei, Xiaomi etc ..)
  Removed EAS support (except sd845) untill further notice (too experimental)
  Corrected SD845 configs
  Agressive tunded LMK for Turbo profile for better gaming experience
  Fixed terminux app conflicts
  Bug fixes and refinemetns
  
  v1.2.5 (17/12/2018)
  Added Performance & Turbo profiles
  Added support (balanced profile only) for exynos9810, kirin650, sd615
  Fixed battery drain for EAS devices
  Fixed some devices not being recognized (again)
  Fixed some bugs with low RAM devices
  Fixed RAM capacity not being displayed correctlly
  Script refinements
  A ton of fixes
  
  v1.2.4 (16/12/2018)
  
  • Fixed connectivity issues for some devices
    
  • Improved SOC chip recognition for some devices
    
  • Thanksgiving @pKrysenko all telegram group members for testing
    
  
  v1.2.3 (15/12/2018)
  Minor bug fixes
  
  v1.2.2 (14/12/2018)
  EAS parameters enhacements
  Memory tuning enhancements
  Added support to SD615 / SD616
  Changed hardware detection method
  I / O scheduler changes
  Removed forced doze for GMS & ril services
  Improved scrolling & FPS in applications
  Added detailed battery health check
  Bug fixes & improvements
  
  v1.2.1 (07/12/2018)
  Not fixed after a while
  Fixed a bug where CPU is not detected correctly (Improved SoC detecting)
  Bug fixes & improvements
  
  v1.2 (05/12/2018)
  Added for some SoCs on balanced profile
  Improved swap detection & disabling (again)
  Reviewed & removed some stuff
  Bug fixes & improvements
  
  v1.1 (04/12/2018)
  Fixed
  Swap partitions detecting improvements
  Thanks for the whalesplaho
  
  v1.0 (12/04/2018)
  First release

Download:
LKT-v1.6.zip(3.14 MB)

[ADDON] zRAM manager 1.1.zip(3.11 MB)

Past versions

LKT-v1.5.2.zip(3.14 MB)

[ADDON] zRAM Manager.zip(3.1 MB)

LKT-v1.5.1.zip(3.14 MB)

LKT-v1.5.0.zip(3.14 MB)

LKT-v1.4.9.zip(3.14 MB)

LKT-v1.4.3.zip(3.17 MB)

LKT-v1.4.2.zip(4.06 MB)

LKT-v1.3.9.zip(4.06 MB)

LKT-v1.3.8.zip(4.05 MB)

LKT-v1.3.7.zip(4.05 MB)

LKT-v1.3.6.zip(4.05 MB)

LKT-v1.3.5.zip(4.05 MB)

LKT-v1.3.4.zip(4.05 MB)

LKT-v1.3.3.zip(3.53 MB)

LKT-v1.3.2.zip(3.53 MB)

LKT-v1.3.0.zip(3.53 MB)

LKT-v1.2.9.zip(2.6 MB)
LKT-v1.2.8.zip(2.6 MB)

LKT-v1.2.6.zip(2.6 MB)

LKT-v1.2.5.zip(2.6 MB)

LKT-v1.2.4.zip(2.59 MB)

LKT в„ў -v1.2.3.zip(2.59 MB)

Post has been editedPalychRv - 24.03.19, 23:32

Reason for editing: v1.6 (03/24/2019) + [ADDON] zRAM manager

[PalychRv]

Magisk fonts
A collection of fonts for Magisk from our members of the forum

from xavbek
from Zipper @
fromartebo
from[-Aleksiy-]

Post has been editedPalychRv - 13.02.19, 10:31

Reason for editing: fonts from [-Alexy-]

[PalychRv]

LKT в„ў | High performance & Power saving tweaks for all deviceUpdated on 12/19/2018

version:v1.3.0

Changelog

v1.3.0 (12/19/2018)

• Fix for some devices
  
• Added support for sultanxda cpu boost implementations
  
• Updated to latest UNITY template 2.0
  
• Bug fixes and refinemetns

Post has been editedPalychRv - 19.12.18, 12:07

Reason for editing: v.1.3.0

[kvdkvd]

ViPER4Android FXUpdate v2.1 - 12/20/2018 1:34:46
Change v2.1:
- Remove usb policy patching - it's in a separate module now
ViPER4Android_FX-v2.1.zip(16.96 MB)

[PalychRv]

LKT в„ў | High performance & Power saving tweaks for all deviceUpdated on 12/23/2018

version:v1.3.3

Changelog

v1.3.3 (23/12/2018)v1.3.3 (23/12/2018)
EAS parameters adjustments
Reverted HMP scheduler changes
Fixed RAM capacity & CPU frequency not displayed in LKT.prop
Bootloop bug fix
Scrolling bug fix
Crashing apps fix
Other minor changes & fixes

• EAS parameters adjustments
  
• Reverted HMP scheduler changes
  
• Fixed RAM capacity & CPU frequency not displayed in LKT.prop
  
• Bootloop bug fix
  
• Scrolling bug fix
  
• Crashing apps fix
  
• Other minor changes & fixes

Post has been editedPalychRv - 23.12.18, 20:09

[Linkinpro]

1Controller

• Version: 1.2
  
• Developer:Electric1447 (Github, XDA).
  
• Home pages: Github, XDA.
  
• Previous Post:(There is none)
  
• Requirements: Magisk corev17 and up.
  
• Job description, functionality(Google-Kryakozyabry):This module is intended to become a universal module for controllers. It adds .kl files to fix the key bindings on any game controllers.(Like on a PC, the drivers are installed and the controllers are shy.)
  
  
• Screenshots

  (The module has no interface!)
• Note

  Original

  • High delay when Dualshock 4 with Bluetooth (Seems to be a problem with the controller itself).
  • Doesn’t work on MIUI 10 devices.

  Google-Kryakozyabra

  • High delay with Dualshock 4 with Bluetooth (it seems to be a problem with the controller itself).
  • Does not work on MIUI 10 devices.
• Changes

  Original

  - 1.2

  • Fixed some DS4 mappings.

  - 1.1

  • Added Dualshock 3 support.

  Google-Kryakozyabra

  - 1.2

  • Fixed some DS4 mappings.

  - 1.1

  • Added support for Dualshock 3.
• Installation + Download

  As usual -1Controller v1.2.zip(11.56 KB)
  
  >>>FAQ on installing magisk-modules via ZIP-installer

  Previous versions

  1.1

  As usual -1Controller v1.1.zip(11.56 KB)
  

• For questions and comments - inQMS for first aid. I don’t do much, because I’m not familiar with the module, but I’ll help with what I can ...

Post has been editedLinkinpro - 18.02.19, 17:53

Reason for editing: Completed the requirements ...

[PalychRv]

LKT в„ў | High performance & Power saving tweaks for all deviceUpdate 12/27/2018

version:v1.3.8

Changelog

v1.3.8 (27/12/2018)

• SoC detection issues fixes for samsung & other devices

Post has been editedPalychRv - 27.12.18, 19:03

Reason for editing: v.1.3.8

[Linkinpro]

Update 1Controller

• Version: 1.2
  
  
• Changes

  Original

  - 1.2

  • Fixed some DS4 mappings.

  Google-Kryakozyabra

  - 1.2

  • Fixed some DS4 mappings.
• Download

  >>>Post LinkinPro, # 80598523
  
  

Post has been editedLinkinpro - 17.01.19, 12:29

Reason for editing: Changed the contents of the "Changes" spoiler ...

[Linkinpro]

[CVC] ChargingVoltageController

• Version: 3.0
  
• Developer:TheHitMan7 (Github, XDA).
  
• Home pages: Github, XDA.
  
• Previous Post:(There is none)
  
• Requirements: Magisk corev15 and up.Works only onRevoltto the core!
  
• Job description, functionality(Google-Kryakozyabry): [CVC] Charging Voltage Controller(from EnglishCharging voltage controller abbr. CVC ) is a set of commands written in a bash script to improve charging speed by setting parameters fast chargeRevolt - core. Revolt - The core supports fast charging function. This kernel mod will help you charge your device faster. You will get good results only from voltage ~ 220V (in the sockets).
  
  
• Screenshots

  (The module has no interface!)
• Development note

  Original

  - Supported Kernel: Revolt Kernel Only!
  - MIUI Support: No!

  Google-Kryakozyabra with changes to the "human zyak"

  - Supported onlyRevolt -core!
  - No supportMIUI !
• Basic har-ki

  Original

  - Enable Fast Charge.
  - 4 Different Modes 3000mA | 2400mA | 2000mA | 1800mA.
  - Suppor Wall Charger Charging Only.
  - Maximum amps allowed for 5V / 2A Charger is 2400mA.
  - Maximum amps allowed for QC 3.0 18watt Charger 2400mA - 3000mA.
  - Maximum Voltage 4.4V.
  - High amps (mA) and Low Voltage when battery Charge in between 1% - 85% during charging.
  - Low amps (mA) and High Voltage when battery charge in between 85% - 100% during charging.

  Google-Kryakozyabry with changes to the "human language"

  - Fast charging is activated.
  - 4 different modes: 3000 mA, 2400 mA, 2000 mA and 1800mA.
  - Charger support only from ~ 220V.
  - Max. The permissible current value for a 5 V / 2 A charger is 2400 mA.
  - Max. The permissible current values ​​for the QC 3.0 charger are 18 W 2400 mA - 3000 mA.
  - Max. voltage - 4.4 V.
  - High current (mA) and low voltage when charging the battery in the range from 1% to 85% during charging.
  - Low current (mA) and High voltage when charging the battery in the range from 85% to 100% during charging.
  
• Changes

  Original

  - v4.0:

  • Fix uninstaller issue.
  • MSM-thermal optimization in kernel.
  • Fixes in thermal-engine.conf.
  • SMB-charger module fixes.
  • Remove unused files and codes.
  • Fix wakeup delay in pie ROMs.

  - v3.0:

  • Remove kernel setup script.
  • Code cleanup.
  • More universal.
  • Allow checking for Fast Charge toggle status.
  • Allow files checking.
  • Using optimized thermal-config now.

  
  

  Google-kryakozyabry to changes in "human language"

  - v4.0:

  • Fixed deletion issue.
  • MSM thermal optimization in the core.
  • File fixes thermal-engine.conf .
  • Fixes SMB-module charger.
  • Removed unused files and part of the code.
  • Fixed delay in waking a disk on Android Pie .

  - v3.0:

  • Removed kernel installation script.
  • Cleaned code.
  • More versatile.
  • It is allowed to check the status of the fast charge switch.
  • File verification allowed.
  • Optimized Therm-config is used.
  
  
• Installation + Download

  >>>Magisk Manager can only return changed files that have been replaced by the module! We make a backup of the kernel, if you need to roll back!
  
  Install and reboot the device, follow the instructions below -[Kernel] [FastCharge] CVC Module v4.0.zip(1.1 MB)
  
  

  We still need to run a modification script, it will not die itself!

  Original

  - Install Terminal Emulator App First.
  - Open it.
  - Type "su" without quotes.
  - Then Type "run.sh" without quotes.
  - Follow given instructions.
  - Done.

  Google-kryakozyabry to changes in "human language"

  Note: In some places I will write short and clear. If you, as one person said, "the pioneers who cannot be told yet - they are not shifted" - your problems. I am not a pioneer, alas - I have written clearly and intelligibly ...
  

  1. To installAndroid Terminal Emulatorand run.
  2. Enter "su "(without quotes) and execute, issue a ROOT access to the Terminal.
  3. Enter " run.sh "(without quotes) and execute.Then choose what you need ...
     1. General Information.(Main info)
        1. Get CVC Info.(Get CVC info)
           
           
     2. Check Toggle Status(check switch status)
     3. Check Fast Charge Files(check fast charge files)
        1. Start File Testing.(run test files)
        2. Exit.(Exit, of course ...)
           
           
     4. Toggle fast charge(switch to fast charge)
        1. Do you use Quick Cherge 3.0 Charger(Do you useQuick Charge 3.0?)
           1. Toggle Fast Charge upto 2400mA & 3000mA.(Enable for batteries2400 mA & 3000 mA)
           2. Toggle Fast Charge upto 2000mA.(Enable for batteries2000mA)
           3. Toggle Fast Charge upto 1800mA.(Enable for batteries1800mA)
              
           
           
        2. Do you use 5V / 2V Charger(Do you use 5V / 2V charging?)
           1. Toggle Fast Charge upto 2400mA & 3000mA.(Enable for batteries2400 mA & 3000 mA)
           2. Toggle Fast Charge upto 2000mA.(Enable for batteries2000mA)
           3. Toggle Fast Charge upto 1800mA.(Enable for batteries1800mA)
              
           
           
           
     5. Reset(Restore / Rollback)
     6. Exit.(Exit, of course ...)

  
  >>>FAQ on installing magisk-modules via ZIP-installer
  
  

  Previous versions

  3.0

  Install and reboot the device, follow the written instructionshere - [CVC] ChargingVoltageController v3.0.zip(1.1 MB)
  

• For questions and comments - inQMS for first aid. I don’t do much, because I’m not familiar with the module, but I’ll help with what I can ...

Post has been editedLinkinpro - 18.02.19, 17:54

Reason for editing: Modified / Corrected modification launch instruction ...

[Linkinpro]

ADB & Fastboot for Android NDK

• Version: 1.0.39
  
• Developer:osm0sis & Surge1223 (osm0sis:Github, XDA; Surge1223:Github, XDA).
  
• Home pages: Github, Talk onXDA, Thank you for pushingPayPal.
  
• Previous Post:(There is none)
  
• Requirements: Magisk core.
  
• Job description, functionality("humanly" from Google-Kryakozyabr):ATMarshmallowremoved ADB from directory/ system / bin. For those who need this functionality, here’s a simple installer that sends ADB & Fastboot static compilations to/ system / xbinand uses the command shell to point the ADB to the correct HOME directory and install TMPDIR for compatibility. Detects and supports system-less installation throughSuperSU / Magisk. Then it can be used from the terminal when loading from now on.(That is, as I understood, inMMhave cut out the adb and this module returns its system-less setting to/ system / xbin)
  
  
• Screenshots

  (The module has no interface!)
• Changes

  (Razrab did not provide)
• Installation + Download

  As usual -ADB & Fastboot for Android NDK v1.0.39.zip(1.13 MB)
  
  >>>FAQ on installing magisk-modules via ZIP-installer

• For questions and comments - inQMS for first aid. I don’t do much, because I’m not familiar with the module, but I’ll help with what I can ...

Post has been editedLinkinpro - 18.02.19, 17:56

Reason for editing: Changed the description of the link with the installation instructions ...

[Linkinpro]

Android Mic Fix

• Version: 3.2.4
  
• Developer:Nomelas (Github, XDA).
  
• Home pages: Github, Talk onXDA, Thank you for pushingPayPal.
  
• Previous Post:(There is none)
  
• Requirements: Magisk Core v16or higher(according to the manifest data - v15 and higher).
  
• Job description, functionality(Google-Kryakozyabr):Resolves low volume microphone issues for various Android devices. You can also fix the “OK Google” detection.
  
  
• Screenshots

  (The module has no interface!)
• Development note

  (Google-Kryakozyabry)
  - Originally developed for OnePlus One, but will work for some others. Your mileage will vary.
• Changes

  Original

  - v3.2.4

  • Bump to 3.2.4.

  - v3.2.3:

  • Updated template to v1500.

  - v3.2.2:

  • Updated template to v1400.

  - v3.2.1:

  • Fixed Template & cache bug.

  - v3.1.1:

  • Fixed Magisk Manager download bug. Should be through the manager now.

  - v3.1:

  • Updated template to v4.
  • Updated to Magisk v13.1.

  - v3.0

  • Changed to now use PROPFILE.
  • Updated to Magisk v12.0.

  - v2.0

  • Name changed from OnePlus One (bacon) Mic Fix.
  • Updated template to v3.

  Google-Kryakozyabra

  - v3.2.4

  • Raise to 3.2.4.

  - v3.2.3:

  • Updated template to v1500.

  - 3.2.2:

  • Updated template to v1400.

  - v3.2.1:

  • Fixed template and cache error.

  - v3.1.1:

  • Fixed loading Magisk Manager. It should be good to download through the manager now.

  - v3.1:

  • Updated template to v4.
  • Updated to Magisk v13.1.

  - v3.0

  • Changed now to use PROPFILE.
  • Updated to Magisk v12.0.

  - v2.0

  • Name changed from OnePlus One (bacon) Mic Fix.
  • Updated template to v3.
• Installation + Download

  As usual -Android Mic Fix v3.2.4.zip(9.37 KB)
  
  >>>FAQ on installing magisk-modules via ZIP-installer

  Previous versions

  3.2.1

  As usual -Android Mic Fix v3.2.1.zip(9.65 KB)
  

  3.1.1

  As usual -Android Mic Fix v3.1.1.zip(9.52 KB)
  

  3.0

  As usual -Android Mic Fix v3.zip(10.73 KB)
  

  2.0

  As usual -Android Mic Fix v2.zip(10.66 KB)
  
  
  
• How to do without a magisk module(I do not guarantee that I will kill)

  As the developer says, the module only changesbuild.propto the desired values. In fact, if you change / add them, you can do the same result without the intervention of the module. The code on the screen below with of. pages onXDA.

  Screenshot

  >>>Backup prop'nik has not been canceled!
  

• For questions and comments - inQMS for first aid. I don’t do much, because I’m not familiar with the module, but I’ll help with what I can ...

Post has been editedLinkinpro - 18.02.19, 17:57

Reason for editing: Minor fixes ...

[PalychRv]

LKT в„ў | High performance & Power saving tweaks for all deviceUpdated on 01/01/2019

version:v1.4.2

Changelog

v1.4.2 (01/01/2019)
More bug fixes

Post has been editedPalychRv - 01.01.19, 12:46

Reason for editing: v 1.4.2

[esleer]

Greenify4Magisk
version:v4.5.1 21.12.2018

Developer: abacate123
Xda: [DEPRECATED] Greenify4Magisk [v4.5.1]
Russian interface:Yes
Technical requirements:Android 5.0 - 8.1.0, Magisk v15.3 +
Job description, functionality:allows you to identify and put into sleep mode background processes and services that run on certain events (network connection, unlocking the device, installing / removing programs, etc.)

Screenshots

Download:

Greenify4Magisk_v4.5.1.zip(6 MB)

Past versions

• Greenify4Magisk_v4.5.0.zip(5.05 MB)
  
  

Post has been editedesleer - 08.01.19, 00:31

Reason for editing: Spelling;)

[Kirhe]

Magisk Manager Recovery Tool
version:2.1 ALPHA

Developer: Pzqqt
Homepage: https://github.com/Pzq…_Manager_Recovery_Tool
Xda: https: //forum.xda-deve...ool-v1-0-t3866502/amp/
Russian interface:Yes, unofficial translation. On the observed under translation, inform me in QMS
Technical requirements:Any recovery with touchscreen support. TWRP recommended
Job description, functionality:Not a module, but a VERY handy tool for configuring Magisk. Powerful analogthis tool. With it, you can remove, disable / enable modules, configure ROOT rights, etc. It can be very helpful when, after installing a module, the system suddenly stopped loading. Using the tool is very simple. Install as a regular zip with firmware and further, in a very accessible way, you can configure Magisk. It works only in recovery and after a reboot, no traces remain in the system, except for those operations that you performed in the program.

Screenshots

Changes

Version 1.2 ALPHA
1. Give up zip, use 7za

Version 1.3 ALPHA
1. Improve magisk.img mount method
2. Draw a fake Magisk logo
3. Show module ID on title
4. Add an option to show module description
5. Version text italic
6. Code clean

Version 1.4 ALPHA
1. Show different icons depending on the module status
2. Adjust the method of getting module description
3. Add an option to enable / disable Magisk core only mode
4. Remove all unnecessary "-ex" parameters
5. Code clean

Version 1.5 ALPHA
1. No longer use the textbox to return the results (all use Alert dialog)
2. Dynamic enable / disable module (auto_mount) options
3. Adjust UI & some text (like the Magisk Manager app)
4. Code clean

Version 1.6 ALPHA
1. Support operate / data / adb / modules directory (compatible with magisk.img). And make some adjustments to the UI.
2. 7za: set compression method to 0 (reduce startup time by at least 30%)
3. Show more execution details when flashing
4. Shrinking magisk.img: only show results, no details
5. Code clean

Version 1.7 ALPHA
1. Force use DroidSansFallback font
2. Use an easier way to create symbolic link
3. Faster way to get magisk.img size
4. Mount / system as readonly
5. Support reading build.prop from system-as-root devices
6. Show installed Magisk version code in the welcome interface
7. Show magisk.img information (size & free) in the welcome interface
8. Remove useless partition information in the welcome interface
9. Show module's size on subtitle
10. Add an option to the show module's recursive directory listing
11. Add an option to the module.
12. Code clean

Version 1.8 ALPHA
1. Show magisk.img used size instead of free size
2. Use an easier way to show installed Magisk version
3. License: change to GPL-3.0
4. Handle compatibility with Magisk v19.0
5. Code clean

Version 1.9 ALPHA
1. Handle modules with exception path (module ID / directory name endswith \ r)
2. Improve the mount_image & symlink_modules method again
3. With the help of Aroma Installer's built-in function_file function, reduce startup time at least 50%
4. Add -h flag to du command
5. Improve generate icon prop method, shorten interface conversion time
6. Hide unavailable options directly
7. Get the module's status
8. Add an option to clear the MagiskSU logs
9. Add an option to remove all saved apps MagiskSU permissions
10. Add an option to reject all saved apps MagiskSU permissions
11. Add your option to all saved apps MagiskSU permissions
12. Add build script
13. Code clean

Version 2.0 ALPHA
1. List installed modules: sort by module id (case insensitive) or sort by module name
2. Add it to your system.
3. Add an option to uninstall Magisk (include latest Magisk-uninstaller package)
4. Add an option to manage Root rights
5. Remove some residual options from v1.9
6. Some UI & text adjustments
7. Code clean

Version 2.1 ALPHA
1. Automatic creation modules dir when MAGISK_VER_CODE> 18000
2. Automatic creation /data/adb/magisk.img when MAGISK_VER_CODE<= 18000 (drop check /data/magisk.img)
3. Shrink magisk.img: Fix sometimes "awk: not found"
4. Give some sorting tasks to sqlite3
5. Rebuild tree binary with Android ndk
6. Include a prebuilt sqlite3 binary (built with Android ndk)
7. List installed modules: force sort by module name
8. Some UI text adjustments, and remove "Geek mode" debug option
9. Update Magisk uninstaller to 20190501
10. Drop unused resources
11. Show more execution details
12. Code clean

Download original version: Magisk_Manager_Recovery_Tool-2.1-Alpha.zip(4.34 MB)
Download the Russified version: Magisk_Manager_Recovery_Tool-2.1-Alpha_Russian.zip(4.34 MB)

Previous versions

Magisk-Manager-Recovery_V1.2-ALPHA5.zip(1.52 MB)
Magisk-Manager-Recovery_V1.2-ALPHA5-Russian.zip(1.52 MB)
Magisk_Manager_Recovery_Tool_v1.4-Alpha.zip(1.55 MB)
Magisk_Manager_Recovery_Tool_v1.4-Alpha_Russian.zip(1.55 MB)
Magisk_Manager_Recovery_Tool_v1.5-Alpha.zip(1.53 MB)
Magisk_Manager_Recovery_Tool_v1.5-Alpha_Russian.zip(1.53 MB)
Magisk_Manager_Recovery_Tool-1.6-Alpha.zip(1.53 MB)
Magisk_Manager_Recovery_Tool-1.7-Alpha.zip(3.29 MB)
Magisk_Manager_Recovery_Tool-1.8-Alpha.zip(3.33 MB)
Magisk_Manager_Recovery_Tool-1.8-Alpha_Russian.zip(1.78 MB)
Magisk_Manager_Recovery_Tool-1.9-Alpha.zip(1.77 MB)
Magisk_Manager_Recovery_Tool-2.0-Alpha.zip(3.98 MB)

Post has been editedKirhe- Today, 08:31

Reason for editing: New version