5 pagesV  « < 3 4 5 »  
 
REPLY
> TP-LINK Archer C9 (AC1900 Dual Band Wi-Fi Gigabit Router) - discussion | [wifirouter]: 600Mb \ s - 1300Mb \ s + 4x1Gb | 1xUSB 2.0 and 1xUSB 3.0
A.r.c.h.e.r.
Message#1
21.07.18, 16:48
Old resident
*******
[offline]

Group: Curators
Messages 960
Check in: 12.04.18

Reputation:-  47  +

TP-LINK Archer C9 (AC1900 Dual Band Wi-Fi Gigabit Router)- Discussion
wifirouter: 2.4GHz (600Mbit \ s) - 5GHz (1300Mbit \ s) + 4 • 1Gbit \ s | USB: 1xUSB 2.0 and 1xUSB 3.0

Attached Image

The forum decided to post images under the spoilerPicture

Description
Support next-generation 802.11ac wireless standard
Total bandwidth up to 1.9 Gbps: up to 1300 Mbps at 5 GHz and up to 600 Mbps at 2.4 GHz
3 removable dual-band antennas for maximum omnidirectional wireless coverage
Beamforming technology provides high-performance wireless connectivity.
Dual-core 1 GHz processor ensures no delays while processing tasks performed over a wired and wireless connection
USB 3.0 and USB 2.0 ports allow you to create shared access to printers, files and media for devices on a local network or remotely via an FTP server
The ability to connect 3G / 4G-modems to the USB port
Specifications
HARDWARE CHARACTERISTICS

Interface: 4 LAN ports 10/100/1000 Mbit / s, 1 port WAN 10/100/1000 Mbps, 1 port USB 2.0 and 1 port USB 3.0
Buttons: WPS / Reset Button, Wireless Broadcast On / Off Button, Power On / Off Button
External power supply: 12 V / 3.3 A
Dimensions (W x D x H): 221 x 86 x 168.5 mm
Antenna: 3 dual-band removable antennas

PARAMETERS OF WIRELESS MODULE

Wireless standards: IEEE 802.11ac / n / a 5 GHz, IEEE 802.11b / g / n 2.4 GHz
Frequency range (reception and transmission): 2400-2483.5 MHz, 5150-5350 MHz, 5650-5725 MHz
Transmission speed: 5 GHz: Up to 1300 Mbps, 2.4 GHz: Up to 600 Mbps
Sensitivity (reception):
5 GHz : 11a 6 Mbps: -94 dBm, 11a 54 Mbps: -76 dBm, 11ac HT20: -68 dBm, 11ac HT40: -64 dBm, 11ac HT80: -60 dBm
2.4 GHz: 11g 54 Mbps: -77 dBm, 11n HT20: -73 dBm, 11n HT40: -71 dBm
EIRP (wireless signal strength):<20 dBm or<100 mW
Wireless Mode Features: Enable / Disable Wireless Broadcast, WDS Bridge, WMM, Wireless Connection Statistics
Wireless Network Security: Encryption Modes: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK

CHARACTERISTICS OF SOFTWARE

QoS (data prioritization): WMM, bandwidth control
WAN Connection Type: Dynamic IP / Static IP / PPPoE / PPTP (Dual Access) / L2TP (Dual Access) / BigPond
Management: Access Control, Local Management, Remote Management
DHCP: Server, client, DHCP client list, address reservation
Port Forwarding: Virtual Server, Port Triggering, UPnP, DMZ
VPN traffic pass: PPTP, L2TP, IPSec
Access Control: Parental Control, Local Management Control, Node List, Scheduled Access, Rules Management
Network Security (firewall): Protection against DoS attacks, SPI firewall, filtering by IP address / MAC address, domain name, binding by IP and MAC address
Protocols: Supports IPv4 and IPv6
Shared via USB: Supports Samba (storage device) / FTP server / media server / print server
Guest network: one 2.4 GHz guest network, one 5 GHz guest network
Additional photos
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Firmware
Useful

The curator of the topic isA.r.c.h.e.r.


Post has been editedA.r.c.h.e.r. - 11.04.19, 19:57
Kitty
Message#82
19.02.19, 11:37
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 84
Check in: 18.12.10
Apple iPhone 7 Plus

Reputation:-  1  +

Devils0411 @ 02.18.19, 00:38*
The firmware version becomes 3.0.0 (4555). There are subtleties. DDNS does not work, NTP does not work. Firmware update does not work

On the state of the site tplink firmware, there is no postscript in the file name. But maybe she just did not fit there? There is a long name.
I also changed, as you, NTP earned after a reboot, the entrance to the cloud and the update - does not work.
Devils0411
Message#83
19.02.19, 23:21
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 50
Check in: 17.09.07
Xiaomi Redmi Note 3 Pro Special Edition

Reputation:-  1  +

* Kittygenerally killed two nights. There are sorts on the site TPLinka, but it was not so easy to collect them. I tried both on ubunt and redhat (with grief I found the version that the developer recommends) - it gives a lot of errors during the build.
I tried to repeat the same trick (to fill my hand, so to speak :), like a friend who wrote down the return firmware — the result was a brick (last 10 times he sent it there, and in different incarnations :)). But the benefit of the experience of resurrection from brick in DD-WRT is already available :)
I wrote on the forum TPLinka about this problem, but after reading it (forum), I realized that they simply and stupidly unsubscribe: "Broke / crookedly ask / just dummy - blow to the SC and put off a bunch of attendants!"

I wrote a pepper (which made this most returnable firmware) asking for help - I am waiting for an answer.

Post has been editedDevils0411 - 19.02.19, 23:25
Kitty
Message#84
20.02.19, 08:07
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 84
Check in: 18.12.10
Apple iPhone 7 Plus

Reputation:-  1  +

Devils0411 @ 02.19.19, 11:21*
Wrote on the forum TPLinka about this problem.

I turned technical support. They said - we do not have such firmware, you need to the service center.
Called in the SC, they say - this is not for us, you need technical support.
You keep in touch please reply to you and what happens ...

Post has been editedKitty - 20.02.19, 08:19
A.r.c.h.e.r.
Message#85
12.04.19, 20:39
Old resident
*******
[offline]

Group: Curators
Messages 960
Check in: 12.04.18

Reputation:-  47  +

* Devils0411,
About the results, sign off, if you send, then add to the header.

5 pagesV  « < 3 4 5 » 


 mobile version    Now: 04/18/19, 14:59