Cube Knote 8 - Discussion
Windows 10 пїЅ | Windows 8 and 8.1 пїЅ | Windows RT | Ubuntu linux пїЅ | Change the operating system пїЅ | Search programs пїЅ | Antivirus пїЅ | Ambulance tablet owners пїЅ | Operating systems and software | Accessories






Post has been editedAndrewP_1 - 19.08.18, 14:06

Photos of the tablet in the analysis:

Thermo mode from the Chinese forum Baidu
A source:link

Hi all. I have been using Visual FoxPro 9.0 for a long time, but I have not encountered such a problem as file errors. The DB started to give an error ...
I made copies of the database files at the moment and connected directly to the tables via the db commander, defining the table with an error.
Also deleted the index file, so that the database itself would be tightened.

0 .... or rather you can? I can only answer your question in the same style: Try online dbf recovery
https://dbf.recoverytoolbox.com/online/ru/

1. Either antivirus
2. Either rights (VFP + Win 7 do not like My Documents and Program Files)
3. Either the base is occupied by another process (may point 1)
4. Either compatibility mode

Post has been editedshemihe - 20.07.18, 01:35

Are there any owners? How much battery is really enough?

Photo of the completed thermomode. Results: 55 degrees in stock, 65 degrees when unlocking tdp up to 13 watts.

Posted 20/07/2018 20:31:

Kolay,
I haven’t got it myself yet, but on Chinese forums they say an average of 5-6 hours with quiet use (movies, surfing, office).

I looked at a couple of reviews and apparently the reference point is rather 4 + hours of work at 25% brightness in the video viewing mode and surfing. Charges from dc 3-4 hours. So it is better to take care of fast charging and powerbank will not hurt if you need more than 4 hours of work.

Hi everyone! People tell me, I’m thinking of ordering a Chuwi Corebook or Alldocube Knote 8?
But on Techtablets they write that strong heating is the same as for Mix, and the thermo mode with tubes will come out not cheap at the same time, they write about Chuwi that the company itself is not very good ... what do you say about the tablet?

Today I received a tablet. It is heated during charging approximately as mix plus, so the thermo mode is highly desirable. It is not necessary to make a thermomode with heat pipes, you can simply put a copper plate instead of a thermal pad and it will be good already. It is also desirable to lay a thermal pad between the plate and the back cover, but I think this is not necessary.
In general, I chose between cube knote8, chuwi corebook and teclast x5 pro, and chose a cube primarily because of the screen and the ssd volume. The screen is really rich and the detail is excellent. In general, I really liked the screen) So, look what is more important to you.

Post has been editedtyomik1996 - 07.08.18, 15:59

In general, I used a little tablet. The processor turned out to be unlocked up to 15 watts out of the box, on the first day it warmed up pretty well, but after upgrading Windows to 1803 it stopped heating. I saw a maximum of 48 degrees, but I didn’t load him much. Hours following: out of the box twisted full HD video on YouTube 4 hours and 20 minutes at 50 percent brightness. After I changed the power scheme settings, the tablet lasted just over 6 hours with the same scenario. Maybe if you reduce the tdp in the BIOS, it will last even longer, although it is not so bad. Despite the fact that the description indicates single-band wifi, in fact it costs intel dual band ac 3165 to 433 mb / s. RAM memory samsungovskaya. SSD Micron_1100_MTFDDAV256TBN speed on the photo. Matrix TV133QHM-NL0 (from Lenovo Yoga tablet 2 Pro). The tablet turned out to be faster than I thought, the interface works smoothly, the video plays up to 8k60fps, I really liked the screen, in general I am satisfied with the tablet.

Friends, where to take and clave?

At Alieksperss now for 29 thousand is, but the dollar is growing, so it is becoming more expensive every day. You can of course on taobao through intermediaries, but I do not think it will be cheaper.

Where there is? What are you? Links can do?

I paid for the tablet!Alireleased 29909 rubles. without a keyboard, when I come, I will check and make a review, I thought at first about Chuwi Corebook, but of. A spokesman for Chuwi said that the tablet was discontinued and the remnants were being sold out, well I found out in time ...

tyomik1996,
By the way, the SSD of such a company is around 6000-7000 rubles. it already pleases that it’s not just some kind of nouneym, and indeed the stuffing pleases, now I look forward to: D

What kind of 29 thousand speech? 31,594.66 rubles.


Post has been editedGoryna - 15.08.18, 01:56

Goryna ,
This is a new price, I paid for the old one, I had it in reserve

I see the RAM soldered?

There are no opportunities to upgrade?

Until the copper plates came, he disassembled the tablet and made a temporary thermo mode. Cut an aluminum plate 1mm thick from an old network card and put it in place of a gasket. But it seemed to me that the contact between the aluminum and the cooling plates was bad, I had to spread a rather thick layer of thermal paste. So I think it's better to order a record of 1.2 mm. Thermal strip from the processor put on a plate and on it another piece of aluminum 0.5 mm. Temperatures dropped. Now for 20 minutes of stress test 72 degrees max at TDW 7W. For a time come. In principle, I am thinking of soldering a full-sized usb (ideally 3.0), but there is not enough space on the edge, I will have to somehow spin.

Posted 08/15/2018 at 21:07:



Soldered 4 chips 2GB each. The only ghostly option is to solder chips to 4GB, but it's not worth it.

Wow, I did not have time to retire) It is strange that it was the top tablet that was removed.

tyomik1996 , the Chinese did 0.1 mm in general, which surprised me, I didn’t understand much how he stuck the tubes and how thick it was because the plate was curved because of the tubes, I found tubes 1mm and 2mm thick on Ali, I think I won’t cut the main plate much I glue it on the inside where I plug the thermal insulation tape with adhesive tape, put one tube and glue the plate to it, and glue all the elements on top with a graphite film like PGS, also on Ali, it removes heat faster than copper, but for now it’s all plans to make