pars01 @ 05.03.19, 18:56
as dialing numbers substrate. and a list of the buttons pressed files
An interesting way to pressing treatment was podsmotren Topic
WM Dusk and implemented in the topic
BlackRUS2 (version
2.25 without indexes _mod, _RN)
1) At the bottom of the common substrate for all buttons -
dialer_background.9.png2) Slightly higher laminated pressed button lights (
it is one for all the buttons !!! ) -
dialer_button_pressed.png 3) A key top is located with prozrachkoy through which looks through the lower light -
dial_num_X .png(Where the X - button number 0 ... 9, and two more -
dial_num_star.png and
dial_num_pound.png - for the sprocket and the lattice)
On the drain insertion RedmiNote4X - it is displayed normally
And on many other devices / firmware letters began to stray / zadvaivatsya
The custom firmware could play value
dpi and setting it to 420 or 480 to achieve a normal display of buttons, but runoff firmware set
arbitrary value
dpi there is no way, therefore, in versions threads with indices
2.25_mod and
2.25_RN5 lighting has been simplified - left only the lower common substrate
dialer_background.9.png and contour illumination button
dialer_button_pressed.png So it looks simpler, but displays the same on all devices ...
buttons size depends on the
necessary height dialer. Some like high dialer, almost the entire screen, so the buttons were more, someone less - draw your own taste. I have a small dialer - occupies a third of the height of the screen - the size of its
1080x584 . The width and height of the other buttons (backlight and the numeric buttons) - obtained by dividing
size backgrounds
3 and
4 respectively -
360x146 Post has been editedSinister - 06.03.19, 16:44