Huawei E5785 (MTS 8213FT) - Discussion | [usbmodem] [ltemodem]



Rep: (83)
Huawei E5785 (MTS 8213FT) - Discussion

Attached Image


Description
Mobile router CAT.6 from Huawei.
The router is sold in the MTS salons for 5900 rubles.
But along with it, under one article goes MTS862F And the online store can deliver randomly: 8213FT or 862F, despite the photo 8213 on the product card on the site.
Additional Images
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Specifications
Huawei E5785Lh-22c Specification:
technologies: LTE / 4G (Cat6) | UMTS / 3G | GSM / 2G
Frequency ranges: LTE FDD: B1 / B3 / B5 / B7 / B8 / B20 / B32
LTE TDD: B38
UMTS: B1 / B2 / B5 / B8
GSM: B2 / B3 / B5 / B8
CA combinations: Intra-band: B3 / B7 / B38
Inter-band: B3 + B5 / B3 + B7 / B3 + B8 / B3 + B20 / B7 + B8 / B7 + B20
Maximum speeds: LTE: 300 Mbit / s down, 50Mbit / s up | UMTS: 42.2 Mbps down, 5.76 Mbps up (using DC-HSPA +) | GSM: 236 kbps (when using EDGE)
WIRELESS INTERNET ACCESS 802.11a / b / g / n / ac to 867 Mbps | 2 Г— 2 MIMO | 2.4 GHz or 5 GHz | Up to 10 devices at the same time
Software in the test: Firmware Version:
Others: 2 x connection for external antenna (type TS-9) | Replaceable battery 3,000 mAh | MicroUSB connection


Huawei_e5785lh-22c_datasheet.pdf
Useful information
Known Issues

Wifi 80mhz at 5ghz not working
USB does not work on Linux
When using WiFi 5 GHz, a number of “old” devices do not see the network, since the router by default uses channel 149, and devices only see 36–48 channels

There is no curator in the subject. For questions about filling caps, please contactash16in QMS or moderators section through a buttonPictureunder the messages. How to do it right, what would you understand the first time, well describedhere.

Post has been editedash16 - 07.01.19, 15:53
Reason for editing: Modified e-dok firmware



Rep: (22)
1qqq @ 07/18/18, 16:43*
I want to buy to work in the car from the on-board network.

Isn’t it easier then something like this ?:
Huawei E8372 (MTS 8211F) - Discussion



Rep: (58)
* Romuz,

Not easier. This one has aggregation and 5 GHz.



Rep: (641)
1qqq @ 07/19/18, 11:42*
This one has aggregation and 5GHz


If you plan to constantly use it only in a car, then you can still power the B525 from the on-board network and throw it in the trunk :)
And if you still carry with you, then the proposed option is not good

Post has been editedunlochka - 19.07.18, 11:45



Rep: (6)
Does it make sense to purchase this category 6 router to work in the Moscow region at anonymous rates?
where speed can't lift too high.
But you need lesh stability.



Rep: (6)
Nobody knows - do other ops have plans, especially for Megaphone, to sell this or other РЎat.6 devices with support for 3, 7, 20 and 38 bands?

look at the Internet megaphone store Petersburg - there is a mr300-1 huwei but the price is sky-highhttps://spb.shop.megafon.ru/modems/87731.html

Post has been editedSmirnovif - 22.07.18, 13:39



Rep: (58)
Ash16 @ 07/18/2018, 15:06*
* 1qqq ,
rules cell 50364 using balong-nvtool
Without akb does not start, writes battery error

Tell me what to look for and how to pick a cell to work without battery?



Rep: (83)
* 1qqq ,
like thatHuawei B525 - Discussion (Post by rust3028 # 73270553)
but only it didn’t work out for me, and I don’t have much time



Rep: (58)
Ash16 @ 07/23/2018, 17:01*
* 1qqq ,
like thatHuawei B525 - Discussion (Post by rust3028 # 73270553)
but only it didn’t work out for me, and I don’t have much time

There is a description of how to work with it? Or what steps need to be done?

Posted on 07/23/2018, 17:19:

1qqq @ 07/23/2018, 17:18*
...
There is a description of how to work with it? Or what steps need to be done?

About time is clear.

Post has been edited1qqq - 23.07.18, 17:19



Rep: (83)
* 1qqq ,
https://github.com/forth32/balong-nvtool



Rep: (58)
Ash16 @ 07/18/2018, 2:05 p.m.*
...
disassemble
[attachment = "13369323: BootPoint.jpg"]

pour the bootloader from the installer [attachment = "13369329: E5785Lh ... nlocked.exe"]
then mod firmware


We pour the bootloader from the installer .... how is it? How to get it from there?



Rep: (2242)
We pour the bootloader from the installer .... how is it?

Just run E5785Lh-22C_21.236.01.00.234_Unlocked.exe (the first time you need to use keygen).
As soon as the bootloader fills up, sew the mod. firmware.



Rep: (58)
* Romuz,
* rust3028,
* ash16,

Greetings

When pouring the mod and bootloader, should the battery and SIM card be installed ???



Rep: (22)
* 1qqq,
The battery should stand, a SIM card for firmware is not needed.



Rep: (2242)
I think that sewing with a “needle” without a battery is possible.



Rep: (83)
* 1qqq ,
sewed with a SIM card and without and with a battery and without in different variations
no difference
it through the needle by itself

Post has been editedash16 - 26.07.18, 16:25



Rep: (58)
Ash16 @ 07.26.2018, 16:24*
* 1qqq ,
sewed with a SIM card and without and with a battery and without in different variations
no difference


Oke, thanks. Today I will try. Of course, with a battery, the issue needs to be solved somehow. I bought uart to remove the log and connect to the router. How to do it all?

Post has been edited1qqq - 26.07.18, 16:27



Rep: (58)
* Romuz,
* rust3028,
* ash16,


What is the code for the firmware mod? or where to get it? Do AT Commands Work?



Rep: (83)
1qqq @ 07/30/18, 14:51*
What is the code for the firmware mod?
what for you?



Rep: (58)
Ash16 @ 07/30/2018, 15:13*
...
what for you?

For at teams



Rep: (2242)
* 1qqq,
Work.

Posted on 07/30/2018, 16:20:

Maud. firmware OEM code does not change.


Full version    

Help     rules

Now: 08/17/19, 13:52