Disclaimer
All firmware takes place via Bluetooth, directly from your mobile device. By this it is desirable to have a telephone charge and bracelet more than 30%. Also, if you want to get an extreme version of the official firmware for bracelets without NFC suitable standard application Xiaomi Mi Fit, which after the first connection of the bracelet will set an extreme version of the firmware with the language associated with your mobile device (for devices with NFC, this method will not work for them, only the modified firmware and the instruction below)
Instructions for firmware Mi Band 3
According to this manual, you can install any firmware. Official and no, roll back, overstate, in any order. Video instruction on the firmware of the bracelet from m0zg24You need to know that the firmware consists of 3 files: Mili_wuhan.fw - The firmware itself
Mili_wuhan.res - firmware resources
Mili_wuhan.ft - Font 1 (for Russian firmware)
So, for example, to switch from Chinese firmware to Russian, you need to flash these three files.
Instruction: 1. You will need to install on the phone GadgetBridge (the program that will flash your bracelet)
LINK 2. Run any MiFit that you have. If you do not have MiFit, you can put for example
official version from google play and tie a bracelet to it, after the bracelet is tied - read on. We climb into the settings of the bracelet - "Profile - Mi Band 3 - Visibility" and turn on the visibility.
3. Run GadgetBridge. If the list already has your Mi Band 3, then click on the Mi Band 3 sign and wait for it to be written "connected." If you can not connect, remove the Mi Band 3 from the list in GadgetBridge and restart the phone. After the reboot, launch GadgetBridge, click + and add your Mi Band 3. The word "connected" should appear.
4. Download the archive with the firmware you need and unpack it into the phone's memory. Next, consider an example
offrus_mb3.zip (official Russian firmware 1.3.0.4 for Mi Band 3).
5. Once connected to your bracelet GadgetBridge, displace GadgetBridge and open your file manager on the telephone. Open the folder where the unpacked firmware. You should see 3 files - Mili_wuhan.fw, Mili_wuhan.res, Mili_wuhan.ft. I use as a file manager - SolidExplorer, by way of example and will be telling. Long press Mili_wuhan.fw file open select Open with, choose GadgetBridge. GadgetBridge should open with a proposal to install the firmware, click install.
I strongly recommend that you turn on the “Flight” mode during the firmware and stop MiFit, because at any moment there may come a notification that can disrupt (interrupt) the firmware process.
6. After the firmware, again open the folder with the firmware files and similarly flash Mili_wuhan.res and Mili_wuhan.ft
7. The order of the firmware is. Flash the first file with the .fw extension, then the file with the .res extension, then the file with the .ft extension
8. That's all, now you can close GadgetBridge permanently and open MiFit. If GadgetBridge is no longer needed, you can even delete it.
9. The visibility of the bracelet in MiFit (see point 2) after all the firmware is better to turn off, because This adversely affects the battery consumption of the bracelet.
Addition: If you already have official firmware 1.3.0.4 installed for example and you want to install any modification, for example the same 1.3.0.4, but with a modified date format, you only need to flash the files that the modification author himself laid out. Usually it is only a file with the extension .fw. If you want to switch from, for example, 1.2.0.8 immediately to modification 1.3.0.4 with a modified date format, you should flash the missing files from the original 1.3.0.4 in order to avoid various problems.
How to remove firmware from any Mi Fit (Android), so that the modified firmware is not updated