4 pagesV  1 2 3 4 > »  
 
REPLY
> Keenetic City (KN-1510) - Discussion | [wifirouter]
enpa
Message#1
07.06.18, 12:26
case # number
*********
[offline]

Topics Curator
Group: Curators
Messages 4323
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

Keenetic City (KN-1510)- Discussion
Attached Image

Information
Description
  • Product Name:City
  • Part Number:KN-1510-01RU
  • NDM HW ID:KN-1510
  • Wi-Fi AC750 2.4 + 5 GHz with high-precision 5 dBi printed antennas
  • Dynamic selection of the optimal Wi-Fi radio channel
  • Automatic distribution of clients between 2.4 and 5 GHz bands
  • Any Internet tariffs up to 100 Mbps, MultiWAN, IPTV and Smart TV
  • Yandex.DNS and SkyDNS: protection against cyber threats and parental control
  • Configure and manage your home network via mobileattachment

Additional photo
Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

foto by enpa
Specifications
Main characteristics

The model index is KN-1510
The processor - MediaTek MT7628AN (MIPS24Kc) @ 580MHz
RAM - 64 MB (DDR2)
Flash memory - 16 MB (DB NAND), SPI (Dual Boot)
Wi-Fi 2.4 + 5 GHz - Yes
Wi-Fi Class Antennas - MediaTek MT7603 (on-die) 2T2R / 300Mbps (2.4GHz), 2x 5dBi (fixed ext) + MediaTek MT7610EN AC750 (1T1R) / 433Mbps (5GHz), 1x (fixed ext)
Ports - 4x FE (10/100)

Wi-Fi / WPS button ✔
Modes of access point, amplifier, adapter ✔

Performance

2.4 GHz Wi-Fi network speed - 300 Mbps
5 GHz Wi-Fi network speed - 433 Mbps
IPoE / PPPoE Routing - Up to 95 Mbps
L2TP / PPTP Routing - Up to 95 Mbps

Functions and protocols

IPoE ✔
PPPoE ✔
PPTP ✔
L2TP ✔
802.1x
CABiNET ✔
Multiple PPP Tunnels ✔
PAP / CHAP / MS-CHAP / MS-CHAP v2 ✔
MPPE (Auto / 40/56/128)
VLAN IEEE 802.1Q ✔
Route Table (DHCP / Manual) ✔
Link Duo ✔
IntelliQoS ✔
DHCP (client / server) ✔
IPv6 Dual Stack ✔
NAT ✔
Igmp ✔
UPnP
Manual port forwarding ✔
PPTP / L2TP Transit ✔
SPI DoS Attack Firewall ✔
Ping checker ✔

Wi-Fi wireless network

WEP / WPA-PSK / WPA2-PSK Network Protection ✔
Support for additional guest Wi-Fi network ✔
WPS Quick Setup ✔
Wi-Fi Multimedia (WMM)

Applications

Mobile application for Android and iOS ✔
UDP to HTTP proxy ✔
IPSec VPN Client / Server ✔
PPTP VPN server 10 tunnels
Internet filter Yandex.DNS ✔
Parental control SkyDNS ✔
Dynamic DNS client ✔

Physical characteristics and environmental conditions

Device dimensions without antenna, W x D x H - 214mm x 154mm x 33mm
Mass of the device - 488g.
Operating temperature range - 0–40 ° С
Humidity of the ambient air during operation - 20–95%
Power supply - 100–240 V 50/60 Hz

Diagnostics and control

Web configurator in Russian ✔
Command Line (CLI) by TELNET
The ability to control from the external network ✔
Backup and restore configuration ✔
Software update features ✔
Logging system events ✔

Equipment

Device
Power adapter ✔
Ethernet cable ✔
Instructions for use ✔
Certificates
Documentation
Reviews, links
Useful information
Problem solving, setup
NDMS V2 + Entware
Keenopt setup
OpenVPN setup
[Entware] Raise OpenVPN server
[Entware] Openvpn client on the router
Enable 802.11n standard on NDMSv2 firmware (via CLI TELNET)
Forced assignment of N mode (compatibility N) for Wi-Fi via CLI from enpa
Wordpress on Entware
How to print from phone to printer via Android OS
Antenna Comfast CF-ANT2410DA for a place native to Keenetic II, Giga II
Flash modem in HiLink for maximum speed
CAT5 HiLink Speed ​​Test
All about IP Cloud (KeenDNS)
"White" IP from Rostelecom using Entware
Wake on Lan (WOL) function in ZyXEL Keenetic routers
A bit of theory on the mechanism of updating NDMSv2 firmware from _Danila_Master_
Yandex disk / WebDAV in ZyXEL Keenetic
Wi-Fi signal attenuation coefficients when passing through various environments
How to change the network name of the smartphone in Android?
EaseUS Partition Master Free is a handy program for partitioning a hard disk into partitions (suitable for creating a partition in ext3, creating two ntfs & ext3 partitions).
What type of file system and paging file is best to use? Enpa description
What type of file system and paging file is best to use? Option from miltt
Correction of the Transmission operation without reinstalling the router firmware from enpa
How to determine the type of antenna connector (SMA / RP-SMA)?
NTP SERVERS - time servers
Using the zram paging file (LZO) for the swap location from enpa
Creating an ISP (Internet Service Provider) interface via CLI (command line) from enpa
Lock site by name on the firmware from dezhik
If you need port 5 to distribute the Internet to devices on the wire from enpa
Speed ​​limit via CLI (command line) from enpa
PuTTY is a client program for working with network protocols SSH, Telnet, SCP, SFTP, for connecting via a COM port and ZModem, a utility for generating RSA and DSA digital SSH keys.
Solving the problem with ping in games specifically WOT for Wi-Fi from freealbert
WPS on a router - what it is and how to use it
Setting up a connection to a working VPN server using a "gray IP" at the provider from YEDkii
Forced assignment of speed on the port of the router through the CLI from enpa
Resetting factory settings (factory-reset) via CLI from enpa
2 ways to change the MAC address of a computer network card
Zyxel Keenetic Giga III + Zyxel Keenetic Plus DECT - Internet and telephony in the office from WOOF11
The impact of USB 3.0 devices on the quality of data transmission over the air
ΜTorrent client setup
Zyxel GIGA III router: setting up simultaneous work with several Internet channels from Sergei Golubitskiy (youtube video instruction)
Extending your home Wi-Fi network with Dalex-NEMAN ZyXEL PLA4201v2 EE powerline adapters
We fix the display of interfaces in the Connections section of enpa
Installing Keenetic Giga III in a private house from olezel
Setting up remote access Transmission from enpa
Setting up and installing minidlna (1.1.6 + git-8a996b-1) opag-package from enpa
Configuring and installing the syslog-ng opkg-package for recording logs to external media from enpa
Firmware update using enpa CLI TELNET command line
Turning off the LEDs of the router using the CLA TELNET command line from enpa
Disabling the FN button LED using the enpa CLI TELNET command line
When adding a torrent, you can choose which files to download?
Solving display problems \ login by domain name (hostname) of Keenetic router in Windows 10 from enpa
Using the WAN port as a LAN port in Keenetic Giga III \ Ultra II using the enpa CLI TELNET command line
Changing a Wi-Fi wireless channel in Keenetic using the enpa CLI TELNET command line
Configure automatic reboot using CLI TELNET by _Danila_Master_
Comments on the work of the Padavana TX Burst
Four Stream - Does the KN-1010 HT processor software support? Information from balian007
Installing and configuring Transmission 2.93 from Opkg Entware-3x for Keenetic Giga KN-1010 from enpa
Solving the problem of hard disk sleep using the OPKG package hdparm from balian007
Jellyfish Video Bitrate Test Files -.mkv files for testing streaming video and playing multimedia.
Installing and configuring ntfs-3g-utils from Opkg Entware for Keenetic from enpa
MT7615 Wireless Driver Information 4.4.1.2 from Padavan
Turn on seamless Wi-Fi roaming and block Internet advertising on Keenetic routers from hwp.ru
TTL lock
Keenetic Recovery
Instructions

Internet connection setup:

Install and configure KeeneticOS:

Reset:

Diagnostics:

Recovery firmware:

Reservation

Speed ​​Limit:

Remote access:

VLAN:

Forwarding and port configuration:

Wi-Fi setup:

WPS (Wi-Fi Protected Setup):

Security and DNS:

schedule:

Tunnels: PPTP, L2TP \ IPSec, IPSec, SSTP, OpenVPN, VPN server:

File server and USB-drives:

FTP server:

BitTorrent Transmission Client:

DLNA:

Digital television:

USB printer:

CLI (command line), SSH:

Modes:

Digital telephony:

OPKG packages:

IntelliQoS:
Internet speed testing
http://www.speedtest.net/ru/
https://www.nperf.com/ru/
https://2ip.ru/speed/

Attention! Testing servers are provided by external providers and the results of such tests depend on many technical factors.

Test results from these services can only be used for diagnostic purposes.
Application to manage the router
Transmission Management Application
Firmware


The official version of KeeneticOS
Debug version of KeeneticOS
Debug - test (draft) release of the operating system. Repeats the functionality that is in the officially released versions of "Release" or "Beta", but also contains additional fixes and new features. The debug version is under development and may contain bugs.

  • Testing debug versions of KeeneticOS is carried out on the forum Keenetic -here.
  • Changelog of debug versions of KeeneticOS -here.
  • Binary files of debug versions of KeeneticOS, you can download in Keenetic firmware storage -hereandhere.
The program for recovering firmware KN-1510.
KeeneticOS firmware catalog

The curator of the topic is enpa


Post has been editedenpa - 25.05.19, 18:01
Reason for editing: Keenetic (Android) - beta version of the new application for managing routers Keenetic
enpa
Message#2
07.06.18, 14:08
case # number
*********
[offline]

Topics Curator
Group: Curators
Messages 4323
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

Stable firmware version2.11.C.1.0-3 dated 04.04.2018for KN-1510


Component kit
base
easyconfig
ppp
corewireless
config-ap
config-client
pppoe
ydns
config-repeater
pptp
skydns
ppe
dhcpd
l2tp
igmp
dot1x
miniupnpd
kabinet
cloud
angular-ndw
cloudcontrol
pingcheck
trafficcontrol
ddns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes
Version 2.11.C.1.3

Available for: Keenetic Giga III, Keenetic Ultra II, Keenetic Extra II, Keenetic Giga (KN-1010), Keenetic Omni (KN-1410), Keenetic Extra (KN-1710), Keenetic Ultra (KN-1810), Keenetic 4G III rev.B, Keenetic 4G (KN-1210), Keenetic Start II, Keenetic Lite III rev.B, Keenetic Start (KN-1110), Keenetic Air, Keenetic Lite (KN-1310), Keenetic City (KN-1510), Keenetic Air (KN-1610),

New features and other improvements:

• Fixed a problem with access to local resources for domain names of the 4th level through the service KeenDNS
• Removed the "Debug version" banner in the beta version of the web interface

(c)http://service.ndmsystems.com/

Installation process and debug mode
1. Download firmware version 2.11.C.1.0-3
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.11.C.1.0-3 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Attached fileKeenetic City_KN-1510_2.11.C.1.0-3.zip(6.44 MB)

Mirror:
cloud.mail - v2.04-v2.11 Firmware Keenetic
yandex.disk - v2.04-v2.11 Firmware Keenetic
Picture




Official beta firmware version2.12.B.0.0-2 of 05/31/2018for KN-1510

<Starting with firmware version 2.12, the old web interface has been removed. >

Component kit
base
easyconfig
config-ap
corewireless
ppp
config-client
pppoe
ydns
config-repeater
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
pingcheck
trafficcontrol
nortondns
ddns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes
Version 2.12.B.0.0-2 (official beta *):

Available for: Keenetic Giga III, Keenetic Ultra II, Keenetic Extra II, Keenetic Giga (KN-1010), Keenetic Omni (KN-1410), Keenetic Extra (KN-1710), Keenetic Ultra (KN-1810),

New features and other improvements:

• A number of fixes and improvements in the user interface on the pages "Users" and "Applications"
• Also reduced the load on the processor of the Internet center, created by the work of the web interface
• Implemented FTP service stop before unmounting a disk
• Fixed co-operation of the PingChecker service with OpenVPN
• Fixed access to web applications on the home network via KeenDNS in SSL mode
(with)http://service.ndmsystems.com/changelog.html

Installation process and debug mode
1. Download firmware version 2.12.B.0.0-2
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.12.B.0.0-2 there are problems, you will need to do the following:

1. Disable disable all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all the devices from the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Attached fileKeenetic City_KN-1510_2.12.B.0.0-2.zip(6.12 MB)

Mirror:
cloud.mail - v2.04-v2.12 (Test, Beta Firmware) All Keenetic
yandex.disk - v2.04-v2.12 (Test, Beta Firmware) All Keenetic
Picture


Post has been editedenpa - 07.06.18, 14:10
enpa
Message#3
04.09.18, 19:25
case # number
*********
[offline]

Topics Curator
Group: Curators
Messages 4323
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

Stable firmware version2.12.C.1.0-3 dated 08.08.2018for KN-1510

Component kit
base
easyconfig
config-ap
corewireless
ppp
config-client
pppoe
ydns
config-repeater
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
pingcheck
trafficcontrol
nortondns
ddns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes
Version 2.12.C.1

Available for: Keenetic 4G III rev.B., Keenetic 4G (KN-1210), Keenetic Air II, Keenetic Start II, Keenetic Lite III rev.B, Keenetic Start (KN-1110), Keenetic Lite (KN-1310), Keenetic City (KN-1510), Keenetic Air (KN-1610),

New features and other improvements:
• Added work schedule selection for VPN tunnels and modems
• Fixed error updating the KeenDNS IP address in direct access mode for PPP connections
• Fixed problem with reconnection OpenVPN
• Fixed possible authentication error through the web interface.
• Fixed loading page "Other connections"
• Fixed registration of home network devices by MAC address
• Fixed the layout of the "Wi-Fi Clients" page in the "Access Point" and "Amplifier" modes
• Fixed display of mobile application clients
• Fixed the size of the log window on a mobile device

(c)http://service.ndmsystems.com/

Installation process and debug mode
1. Download firmware version 2.12.C.1.0-3
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.12.C.1.0-3 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Attached fileKeenetic City_KN-1510_2.12.C.1.0-3.zip(6.4 MB)

Mirror:
cloud.mail - v2.04-v2.12 Firmware Keenetic
yandex.disk - v2.04-v2.12 Firmware Keenetic


Official beta firmware version2.13.B.0.0-0 of 08/30/2018for KN-1510

Component kit
base
easyconfig
config-ap
corewireless
ppp
config-client
pppoe
ydns
config-repeater
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
pingcheck
trafficcontrol
nortondns
ddns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes
Version 2.13.B.0.0-0

Available for: Keenetic Air, Keenetic Start II, Keenetic Lite III rev.B., Keenetic Start (KN-1110), Keenetic Lite (KN-1310), Keenetic City (KN-1510), Keenetic Air (KN-1610),

New features and other improvements:
• Implemented access to the device via backup connections
• Fixed TTL fix on outgoing packets
• Web: changed the menu design on the main page
• Web: added option for additional Multicast VLAN and additional PVC for IPTV
• Web: improved adaptive layout for small screens
• Web: fixed bugs
• Wi-Fi: implemented MAC-Repeater mode without translating MAC addresses
• Wi-Fi: support for MAC ACL access lists on segments
• Wi-Fi: support for 802.11k / r in manual configuration mode
• Wi-Fi: support for SSID encoded in UTF-8
• IPv6: Yandex.DNS support implemented
• SSTP: Anonymous-DH mode added for compatibility with non-certificate SSTP servers
• L2TP / IPsec server: fixed adding routes through remote clients
• L2TP / IPsec client: shortened the minimum PSK length to three

(c)http://service.ndmsystems.com/

Installation process and debug mode
1. Download firmware version 2.13.B.0.0-0
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.13.B.0.0-0 you have problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Attached fileKeenetic City_KN-1510_2.13.B.0.0-0.zip(6.44 MB)

Mirror:
cloud.mail - v2.04-v2.13 (Test, Beta Firmware) All Keenetic
yandex.disk - v2.04-v2.13 (Test, Beta Firmware) All Keenetic
Picture
enpa
Message#4
07.09.18, 17:04
case # number
*********
[offline]

Topics Curator
Group: Curators
Messages 4323
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

Official beta firmware version2.13.B.0.0-2 of 09/07/2018for KN-1510

Component kit
base
easyconfig
config-ap
corewireless
ppp
config-client
pppoe
ydns
config-repeater
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
pingcheck
trafficcontrol
nortondns
ddns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes
Version 2.13.B.0.0-2

Available for: Keenetic Giga III, Keenetic Ultra II, Keenetic Extra II, Keenetic Extra (KN-1710), Keenetic Omni (KN-1410), Keenetic 4G III rev.B, Keenetic 4G (KN-1210), Keenetic Air, Keenetic Start II, Keenetic Lite III rev.B., Keenetic Start (KN-1110), Keenetic Lite (KN-1310), Keenetic City (KN-1510), Keenetic Air (KN-1610),

New features and other improvements:
• Fixed setting CaptivePortal
• Web: fixed deletion of segment settings
• Web: improved layout

(c)http://service.ndmsystems.com/

Installation process and debug mode
1. Download firmware version 2.13.B.0.0-2
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If you have problems after installing 2.13.B.0.0-2, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Attached fileKeenetic City_KN-1510_2.13.B.0.0-2.zip(6.44 MB)

Mirror:
cloud.mail - v2.04-v2.13 (Test, Beta Firmware) All Keenetic
yandex.disk - v2.04-v2.13 (Test, Beta Firmware) All Keenetic
Picture


Post has been editedenpa - 11.09.18, 17:10
maz284
Message#5
22.09.18, 03:14
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 162
Check in: 15.03.17

Reputation:-  6  +

And what is the beta version?
Slypper
Message#6
23.09.18, 00:09
User
****
[online]

Group: Friendssavagemessiahzine.com
Messages 61
Check in: 19.11.13
Samsung Galaxy A8 + (2018) SM-A730F

Reputation:-  0  +

Hello, please explain how do I make "NAT Type" Clear?

I was interested in this question recently, I was looking for an answer on the Internet, in the same place, I found instructions on port forwarding on the Internet center, it helped, but partially, from Tip'a NAT: Strict, became Moderate, this is of course good, but I wanted would completely open it.

This question interests me exclusively for games!

Post has been editedSlypper - 23.09.18, 00:19
Reason for editing: Correction
enpa
Message#7
03.10.18, 13:24
case # number
*********
[offline]

Topics Curator
Group: Curators
Messages 4323
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

* Slypperif you have a strict or moderate NAT (Network Address Translation) type, then you may have problems connecting to game servers and if you lose your role as a server, you will not be able to connect to it.

In order to get the NAT type "open", you will need to have a "white" type IP address j from the provider and execute the command inconsolewhich will change the UDP port of the source when passing NAT to an arbitrary, different from the initial one:

ip nat udp-port-preserve
system configuration save


You can also find other options on how to change the type of NAT to open, in the knowledge base article -Using Xbox and PS4 when connected via Keenetic.

Posted on 10/03/2018 13:26:

Stable firmware version2.13.C.0.0-1 dated 10/02/2018for KN-1510

Component kit
base
easyconfig
config-ap
corewireless
ppp
config-client
pppoe
ydns
config-repeater
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
pingcheck
trafficcontrol
nortondns
ddns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes
2.13.C.0.0-1

Available for: Keenetic Giga III, Keenetic Ultra II, Keenetic Extra II, Keenetic Giga (KN-1010), Keenetic Extra (KN-1710), Keenetic Ultra (KN-1810), Keenetic Omni (KN-1410), Keenetic 4G III rev.B., Keenetic 4G (KN-1210), Keenetic Air II, Keenetic Start II, Keenetic Lite III rev.B., Keenetic Start (KN-1110), Keenetic Lite (KN-1310), Keenetic City (KN-1510), Keenetic Air (KN-1610),

New features and other improvements:

• Fixed USB-modem MF710M TELE2
• Fixed VLAN support in additional modes.
• Wi-Fi: improved WPS security
• CIFS: fixed access to network storage when using access rights

(c)http://service.ndmsystems.com/

Installation process and debug mode
1. Download firmware version 2.13.C.0.0-1
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.13.C.0.0-1 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Attached fileKeenetic City_KN-1510_2.13.C.0.0-1.zip(6.39 MB)

Mirror:
cloud.mail - v2.04-v2.13 Firmware Keenetic
yandex.disk - v2.04-v2.13 Firmware Keenetic
Picture
vinny_vega
Message#8
09.10.18, 10:46
Visitor
**
[offline]

Group: Active users
Messages 18
Check in: 11.05.16
Samsung Galaxy S9 Exynos

Reputation:-  0  +

Bought yesterday. Prior to that, he was Kinetics Giga 2, worked for more than 5 years and quietly went into another world.
The router was pleasantly surprised, I realized that I never had a real Wi-Fi before) With a 100 Mbps rate, I used to consider Wi-Fi 40 Mbps to be an excellent result, so for torrents I always connected a laptop via LAN.

I installed Kinetics City yesterday with the help of a quick setup directly from a smartphone, it took about 10 minutes. I measured the speed, and O Miracle! gives out 90-95 mbps on wi-fay! But here, of course, 5 GHz decides. Because at 2.4, I have all the channels clogged completely, not overflowed, and at 5 I’m almost one. The only negative point, the router to the far room practically does not finish off (on the way 2 walls and other obstacles), before at least a couple of divisions could be caught, and then there was just one, but I knew about this feature of 5 GHz. There is a repeater in that room, with a speed of 20-30 Mbit.

Post has been editedvinny_vega - 09.10.18, 10:47
NicephorusU
Message#9
09.10.18, 14:21
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 156
Check in: 07.08.13
Samsung Galaxy Note 8.0

Reputation:-  6  +

Gentlemen, who have Sitik and firmware 2.13, look, is there in the Wifi settings Roaming settings?
https: //help.keenetic....0%B8%D0%BD%D0%B3-Wi-Fi
I want to understand exactly if he is in it.
Lavik66
Message#10
10.10.18, 16:35
Grandmother
*********
[online]

Group: Friendssavagemessiahzine.com
Messages 7571
Check in: 24.01.15
Apple iPhone 5s

Reputation:-  1180  +

Vinny_vega @ 10/09/18 10:46*
and at 5 I'm almost alone.

Similarly. )) Downturn 2.4, beyond measure. In the evenings, pipets are simple.

* NicephorusU,there is. Or show a picture?
21010
Message#11
12.10.18, 02:23
a guest
*
[offline]

Group: Users
Messages 1
Check in: 12.10.18

Reputation:-  0  +

Access control by mac addresses for this router (city) is possible? If not through the web interface, then at least through the command line. Who knows?
dead_lock
Message#12
14.10.18, 00:08
Visitor
**
[offline]

Group: Active users
Messages 19
Check in: 29.11.11
Huawei P9 Standart

Reputation:-  1  +

* 21010, there is control - both white and black list, settings in the web interface,Network Rules - Wi-Fi Access Control
strelnik
Message#13
16.10.18, 21:59
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 160
Check in: 31.08.08
Dell Axim X51v

Reputation:-  1  +

Can you please tell if Rostelecom will work with iptv?
enpa
Message#14
23.10.18, 18:33
case # number
*********
[offline]

Topics Curator
Group: Curators
Messages 4323
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

Lavik66
Message#15
27.10.18, 03:54
Grandmother
*********
[online]

Group: Friendssavagemessiahzine.com
Messages 7571
Check in: 24.01.15
Apple iPhone 5s

Reputation:-  1180  +

enpa
Message#16
01.11.18, 18:34
case # number
*********
[offline]

Topics Curator
Group: Curators
Messages 4323
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

Stable firmware version2.13.C.0.0-3 dated 10/17/2018for KN-1510

Component kit
base
easyconfig
config-ap
corewireless
ppp
config-client
pppoe
ydns
config-repeater
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
pingcheck
trafficcontrol
nortondns
ddns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes
2.13.C.0.0-3

Available for: Keenetic Air, Keenetic Start II, Keenetic Lite III rev.B., Keenetic Start (KN-1110), Keenetic Lite (KN-1310), Keenetic City (KN-1510), Keenetic Air (KN-1610),

New features and other improvements:
• Fixed the reasons for the possible instability of the software network accelerator
• IPsec: restored compatibility with CyberGhost service

(c)http://service.ndmsystems.com/

Installation process and debug mode
1. Download firmware version 2.13.C.0.0-3
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.13.C.0.0-3 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Attached fileKeenetic City_KN-1510_2.13.C.0.0-3.zip(6.39 MB)

Mirror:
cloud.mail - v2.04-v2.13 Firmware Keenetic
yandex.disk - v2.04-v2.13 Firmware Keenetic
Picture
maz284
Message#17
04.11.18, 09:29
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 162
Check in: 15.03.17

Reputation:-  6  +

Hello to all. I have such a problem, the speed on the wifi is much higher than on the computer, just like ping. For example, video fi-ping 1, more than 30 MB. and more than 90mb., computer ping more than 140, not more than 4mb. and no more than 9mb. I don’t understand what the problem is (I’m a teapot in these matters), I rummaged through the entire Internet, I didn’t find anything, tell me something or give me a link, the boil is already boiling, I have been tormented for 3 days.
And yet, on the phone it determines my provider, that is, TTC and my city, on the computer there are generally some kind of left data. Help please!

Post has been editedmaz284 - 04.11.18, 09:30
mrwrangler
Message#18
04.11.18, 10:02
Novice
***
[offline]

Group: Active users
Messages 44
Check in: 16.06.18

Reputation:-  1  +

* maz284,
It is necessary to measure and compare to the same server from different devices
maz284
Message#19
04.11.18, 10:25
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 162
Check in: 15.03.17

Reputation:-  6  +

It all started with the fact that I changed the channel from 80 to another (which I do not remember), after that I could not enter the settings from the body or from the computer. I reset it to the factory ones, I set it up again, as it used to be, and this dance started like a pancake, maybe it did something wrong ...
flomzik
Message#20
07.11.18, 08:03
Visitor
**
[offline]

Group: Active users
Messages 26
Check in: 03.01.12
Acer liquid mt

Reputation:-  1  +

Guys, and with the biline will work on l2tp?
AwAk1n
Message#21
09.11.18, 09:48
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 142
Check in: 28.08.10
Xiaomi Redmi Note 5 3/32

Reputation:-  0  +

Good day.
1) Please tell me my provider is Rostelecom. In the connection tab, I created 2 connections automatically: rt is a Rostelecom connection, the status is green, everything is OK, and the Broadband connection is a yellow indicator, so what is a Broadband connection, what is it for?
2) Just wondering how the router distributes priority to the connection of 2.4 and 5 Hz? sitting in a room with a router byvat phone connects to 2.4 and it happens at 5 Hz, more like when a good signal (and it is good) should be 5 Hz. The phone supports 5 Hz.
3) Should I use site filtering? and what type of filtering to choose: Yandex DNS, Norton, Adguard, etc., and which profile to put: Secure Internet / basic / family?

4 pagesV  1 2 3 4 > » 


 mobile version    Now: 05/27/19 16:04