[X]Assistant

[Crazyzy]

Hubsan H501S, H501SS (Pro) - discussion пїЅ
Official site | H501S on the official website, Pro version

• In the subject are allForum Rules | Section Rules;
  
• Useful topics to note:Forum FAQ | How to clean the image under the spoiler;
  
• Instead of saying “Thank you!” Use. If you have less than 15 posts - click on the button.under the message where you were helped, and write thanks;
  
• In the absence of the curator, the moderator fills the topic header. Use the buttonon the message, which, in your opinion, you need to add to the header to contact the moderator.
  

Device photos

Device description

Radio-controlled quadcopter "Hubsan X4 FPV H501S"Equipped with powerful brushless motors and a high-quality HD FPV flight camera. A modern stabilization system with a six-axis gyroscope and a barometer, as well as a Li-Po battery with a capacity of 2700mAh provide an easy and stable flight for a long time.

All of the above features, plus the built-in GPS system, allow for this model to implement features such as automatic return to the starting point, “follow me”, intelligent control mode and altitude fixing. The radio remote control has a very ergonomic design of the case and a color screen on which the image from the model camera is broadcast in real time. This is the perfect four-engine unit for FPV flights!

Built-in HD camera with a resolution of 720p and broadcast video in real time over a distance of 300 meters (with a standard remote control).
4 powerful brushless KV1650 PM1806 motors and 4 reliable 12A rev regulators.
Lipo 7.4V 2300mAh battery provides flight time up to 20 minutes
Lipo battery charging time approximately 150 minutes
Modern control panel with LCD screen (resolution: 480 * 272)

Device characteristics

• Size: 220x220x70mm
  
• Diameter of propellers: 185mm
  
• Weight: 410g
  
• Engines: brushless KV1650 PM1806 (1650 revolutions per 1 V)
  
• Transmitter: 4 channels, 4.3 inch LCD screen (3.7 for the Pro version)
  
• Control range: about 300 meters (1.5 km from the Pro version), 2.4 GHz frequency
  
• Video broadcasting range: about 300 meters (1.5 km from the Pro version), frequency 5.8 GHz
  
• Battery: Li-Po 7.4V 2700mAh
  
• Charging time: about 150 minutes
  
• Flight time: about 17-20 minutes
  
• Camera: video recording resolution of 1280 * 720 30fps
  

Useful information

FAQ on Hubsan.my1.ru
Orda2000 FAQ

Useful

Flasher and firmware

K

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedmihadom - 22.07.18, 13:45

Reason for editing: flasher and firmware

[sadko2000]

For these models it would be good to give in the FAQthislink, there is a lot of information and well structured.

[mr. ego]

Program to remove restrictionsHubsan H501S FW Tool.

[ramzay666]

In the topic of quadrics newbie. Habsan is the first quadric. 3 battery managed to fly off, now I have a new hobby;).
When you first fly further 50m. dying picture on the remote (simple). Rearranged the antenna according to the "Spanish" method. I flew 700m., The picture never disappeared.
Now I think about the battery from 18650 ... More precisely, about several batteries :)

[Crazyzy]

Colleagues, if the topic develops, I will add everything to the cap. And firmware, and software, and utility, and video examples, and FSE is.
Two weeks there was no response.

I created the topic when I waited for the ordered H501SS.
During this time, the device arrived, plus two batteries to it, but the wrong one was brought to the console (Pro). And this is for the best, since in a related forum they shared links to really good and cheap batteries + charging. Now I'm waiting, but for now I took the battery from a 10.8 V screwdriver, two wires a meter long and pins in the battery slot. And I walk like a robot: the battery in your pocket, the wires from your pocket to the remote.

On the copter: definitely liked. When choosing, I expected a simple camera at 720p, but it turned out that in the fresh SS (and possibly S) there is an excellent camera at 1080p. I have flown about 3 hours already, the video was recorded about 12 gigs, I can upload the source files directly to evaluate the picture. Any video hosting strongly cut the quality.

ZY The first copter is a small Syma X21W. It flies only around the house. Carried out on the street, grabbed dust and ruined the engines.

ZZY In the first flight of Khabsan, too, almost killed. By inexperience. Video is: D

Post has been editedCrazyzy - 03.06.18, 19:37

[Tileva]

Sadko2000 @ 02.06.18, 20:20

For these models it would be good to give this link in the FAQ

And this -http://forum.rcdesign.ru/f135/thread450608.html
640 pages.

[ramzay666]

CrazyDron @ 06/03/18 19:36

but it turned out that in the fresh SS (and possibly S) there is an excellent 1080p camera.

By the way, yes. I looked at myself, really writing in 1080p. Suddenly, but nice.

[hanuma17]

Tileva @ 06/03/18 19:39

640 pages

... before the new year I will probably read, I read selectively on my problem .. And I have a theme, which program to look at the file structure on H_501S ?, * _. log files I would like to see (?), all the programs on the firmware, change Parameters, but you need an Explolera type. Who came across such a program (?), But I’m looking to figure out why it’sn’t written on SD-carat photo / video. The monitor goes video + telemetry, SD-carate tested: speed 70 MB / s, the inscription photo \ video on the monitor appears when you click on the book. and all The SD card is empty and on the quad and on the remote. Need any information. Who will respond - thanks!

[dolroma8]

hanuma17 @ 06/04/18 05:46

Why not write on SD-carate photo \ video.

This problem has already been discussed for a long time - it is connected with a memory card, and more specifically with a CLASS card - for our beast (especially for the SS version) you need a card of class 10 and higher, preferably a branded one, and not some Chinese! Checked not only by me. On the forum (in 640 pages) - there is a lot of information on improvements and improvements! Read - this information will not be superfluous !!! I myself have already been flying MORE of the year on the S version - there was ONLY one fall from 100 meters of height - and then by MY WINE - it got into my brain deeply ...: D Again, before switching to it, I had a small Sylet X11 - survivable infection turned out, but he gave me an invaluable experience in management! And so the device (H501S) for your money - SUPER !!! The only thing that he lacks is video stabilization! Firmware periodically updated, there are already a lot of upgrades! So it makes sense to take him as a half-professional!

Post has been editeddolroma8 - 04.06.18, 05:00

[hanuma17]

Yes thank you. There is a lot of information, really especially on OPDA and everything is connected with the characteristics (speed) of SD, but nowhere (and off) it says about the recommended card manufacturers (SD), [for example, like NEOLINE at one time, but now they also put 10 cl ] then we use class 10 and higher, as in all photo / video recorders - progress is moving, somehow. Here is a test of the speed of the card that you set (from Nikon 3300):

I agree about the quality of the video, it is really high quality, I support this opinionramzay666 at 7.
Further, I think that it is necessary to check the conformity of the console and drone, here are the data on the monitor:
v.4.2.24
LCD v.1.3.4
501SS v.2.1.29
v.1.1.38
, today I’ll go to service M, I’ll see what kind of information is there. And about the brain, I agree, you should not climb without need, but from my work experience I know that maybe there is something to read ....

Post has been editedmihadom - 09.06.18, 10:24

Reason for editing: image under spoiler

[grigorii585]

People help! H501s bought to my son, everything works well but the memory card does not see micro sd Kingston 10th grade, 16 Gb in the instructions is written to format in the remote control .. how to do it not a word. I tried to insert into the console and quadrics, the green icon of the memory card with an exclamation point is constantly on the display of the console ... When you press the photo / video buttons, the inscriptions light up. But the card is empty. I tried to pharmacize fat32 does not help.

[hanuma17]

In the 107D manual there is how to format the card, you need to try.
I read something else about my flash drive from my colleagues:
- ....... a lot of people who do not see a memory card, many complaints on the Internet found that the slot does not work and does not see the cards, it’s like a march. (fromgrigorii585) (from myself: the reason is not married after all, but in the overestimated demand for recording speed - that is, the quality of the video, I think so)
- ........ if the card is recognized - the time of possible recording is on the remote control. Recording may not be included if the copter is not ready to run. You need to do the calibration, the mode "without satellites" (for testing) and turn on the recording or take a photo without starting the engines.
Yes, for testing the class is absolutely unimportant. But for flights, if the SS variant (and its program with a variable video stream - then you can see the video characteristics), then the 10th grade at a speed not lower than 90 Mb / s. (fromTileva)
- .......Hooray! comrades h501ss! turned out to be very picky about memory cards! sifted through six pieces of 10th grade of different speeds, not seen more than one! I went to the store bought a new sandisc ultra hc-i 80mb / s 16GB 10th grade, put in and lo and behold! photo and video is written! take note! thanks to all! (fromgrigorii585)

Post has been editedhanuma17 - 16.06.18, 07:45

[ramzay666]

I also had to sort through flash drives. I saw everything, but many did not stop recording on the remote, but in fact not all parts were recorded at all. As a result, it did not work with the new 10th class, but earned it from the ancient 4th class.

[hanuma17]

then the manufacturer doesn’t finish speaking or it’s not read yet ...

Post has been editedhanuma17 - 16.06.18, 09:48

[Ssabmurd]

ramzay666 @ 06.16.18, 09:18

I also had to sort through flash drives. I saw everything, but many did not stop recording on the remote, but in fact not all parts were recorded at all. As a result, it did not work with the new 10th class, but earned it from the ancient 4th class.

In order to close, I think for many a topic with flash drives! The joke is that not so much the class and the company is important, as the format of the flash drive itself, or rather, it should be exclusively in FAT32 format. I tried 10th grade (and top firms). As a result, they couldn’t even be formatted into this file system. And the reason is this, it turned out that many smartphones, tablets, etc. do not support the exFAT format - simply because developers do not want to pay Microsoft for using this format. Therefore, they only support FAT32. And in Windows, FAT32 cannot be formatted without an external utility.
The solution is simple
1. Format the microSD memory card in exFAT.
2. Download the free software program Guiformat FAT32 and format the card with the default settings. She formats it in FAT32.
And voila, we write everything perfectly and take pictures and work with our Quadric and not only.

Post has been editedSsabmurd - 16.06.18, 15:52

[mr. ego]

[email protected], 15:08

And in Windows, FAT32 cannot be formatted without an external utility.

How is it? Perfectly formatted!

Attached images

[Alfred]

Became the owner of this quadric. I use the week, but I can’t figure it out. The questions are:
1. Turn on the quad and remote. The GPS button on the console is up (we turn on), we twist the quad (we adjust the compass, we tie it to the point), we take off (from 10 satellites), everything is fine, the position holds well, even with the wind of 10 m / s, but the dog spins around its axis in a clockwise direction arrow, and can not do anything with it. Not quickly of course, but nothing good. Left-left joystick left-right does not help (although it is necessary to correct it in the instructions). Straightening, he immediately starts spinning further. The right joystick, for example, pressed down, it flew in which direction (depending on where it is spinning). It takes 5 seconds and you press down, and it flies in the other direction, because of its torsion, the position of the nose changes constantly. And so the whole flight, you catch it with all the joystick.
2. Auto return home does not work. When flying by GPS, press the dial up, the quadric does nothing at all, just hangs in place. If it is at the same time low, it climbs about 10 meters and hangs, does not sit down.

Who knows what I'm doing wrong, give advice.

[Kent]

Hello!

Alfred @ 06/22/18, 08:42

give advice.

Calibration was not carried out correctly.
We put the copter on a flat platform for takeoff. On the console, then the copter, it is important to leave the copter alone: ​​yes2: until you see the command to calibrate the compass 1.
Slowly rotate the copter in the horizontal plane until the words "calibration compass 2" appears and the LEDs blink in green. Then lower the copter nose down and slowly rotate in the vertical plane until ready.

Alfred @ 06/22/18, 08:42

GPS button on the remote up (turn on)

No, calibrate the compass when off. GPS on the remote.

Post has been editedKent - 22.06.18, 16:28

[PHPoeniX]

Tell me, how is h501s different from h501ss? Should I take the pro version?

Post has been editedIFrIT1439 - 29.06.18, 16:23

[ramzay666]

S from ss differ for everyone except the console, the case and the engines. S out of production and buy almost unreal. The pro version differs only in remote control.

[PHPoeniX]

By the way, is uboot on this quadcopter?