Keenetic Ultra (KN-1810) - Discussion | [wifirouter]



Rep: (1146)
Keenetic Ultra (KN-1810)- Discussion
ZyXEL Keenetic Ultra II - Discussion
Attached Image

Information
Description
  • Product Name: Ultra
  • Part Number: KN-1810-01RU
  • NDM HW ID: KN-1810
  • AC2600 Wave 2 MU-MIMO 2.4 + 5 GHz with four amplifiers and 5 dBi antennas
  • Any Internet tariffs up to 1 Gbps, MultiWAN, IPTV and Smart TV
  • SFP port for connecting via fiber optic cable
  • USB 2.0 and 3.0 for 3G / 4G / LTE / DSL modems, disks, printer or DECT station
  • File server, DLNA, Time Machine, standalone torrent client Transmission
  • Yandex.DNS and SkyDNS: protection against cyber threats and parental control
  • Configure and manage your home network via mobileattachment

Additional photo
Specifications
Main characteristics

The model index is KN-1810
Processor - MediaTek MT7621AT (MIPS1004Kc) @ 880 MHz, 2 cores
RAM - Nanya NT5CC128M16IP-DI 256MB (DDR3-1600)
Flash-memory - Spansion S34ML01G200TF100 128MB (Dual Boot, NAND)
Wi-Fi 2.4 + 5 GHz - Yes
Class Wi-Fi - 2x MediaTek MT7615N - 2x 4T4R 2.4 / 5GHz (800 + 1733Mbps)
Antennas - 4x 5dBi (FEM Skyworks SKY85303-11 (ePA / eLNA) 2,4GHz, FEM Skyworks SKY85717-21 (ePA / eLNA) 5GHz, fixed DB PIFA ext), AC2600 (ARM + Andes)
Ports - SFP: 1x GE (RTL8211FS combo GPHY), RJ45: 5x GE (10/100/1000)

Wi-Fi / WPS button ✔
FN button - Yes, two buttons
USB ports ✔
3G / 4G connectivity - Via compatible USB modem
Connect via DSL ADSL2 + / VDSL2 viaKeenetic Plus DSL
Telephony support -C Keenetic Plus DECT
Support module for Wi-Fi ✔

Performance

2.4 GHz Wi-Fi network speed - 800 Mbps
Wi-Fi 5 GHz network speed - 1733 Mbps
Gigabit home network ✔
For tariffs above 100 Mbit / s ✔
IPoE / PPPoE Routing - Up to 1800 Mbps Duplex
L2TP / PPTP Routing - Up to 800 Mbps
Reading from a USB disk - 90 MB / s (USB 3.0)

Functions and protocols

IPoE ✔
PPPoE ✔
PPTP ✔
L2TP ✔
802.1x
CABiNET ✔
Multiple PPP Tunnels ✔
PAP / CHAP / MS-CHAP / MS-CHAP v2 ✔
MPPE (Auto / 40/56/128)
VLAN IEEE 802.1Q ✔
Route Table (DHCP / Manual) ✔
Link Duo ✔
IntelliQoS ✔
DHCP (client / server) ✔
IPv6 Dual Stack ✔
NAT ✔
Igmp ✔
UPnP
Manual port forwarding ✔
PPTP / L2TP Transit ✔
SPI DoS Attack Firewall ✔
Ping checker ✔

Wi-Fi wireless network

Seamless roaming 802.11 k / r / v ✔
MU-MIMO ✔
Airtime Fairness ✔
Beamforming ✔
Pre-configured protection Wi-Fi ✔
WEP, WPA-PSK ✔
WPA2-PSK, WPA2-Enterprise ✔
WPA3-PSK, WPA3-Enterprise, OWE ✔
Multi-SSID and guest network ✔
MAC access control ✔
Wi-Fi Multimedia (WMM)

Applications

Mobile application for Android and iOS ✔
Transmission torrent client ✔
File server ✔
DLNA server ✔
UDP to HTTP proxy ✔
FTP server ✔
Print server ✔
IPSec VPN Client / Server ✔
PPTP VPN server - 10 tunnels
Internet filter Yandex.DNS ✔
Parental control SkyDNS ✔
Dynamic DNS client ✔

Physical characteristics and environmental conditions

Device dimensions without antenna, W x D x H - 214mm x 154mm x 33mm
Mass of the device - 488g.
Operating temperature range - 0–40 ° С
Humidity of the ambient air during operation - 20–95%
Power supply - 100–240 V 50/60 Hz

Diagnostics and control

Web configurator in Russian ✔
Command Line (CLI) by TELNET
The ability to control from the external network ✔
Backup and restore configuration ✔
Software update features ✔
Logging system events ✔

Equipment

Device
Power adapter ✔
Ethernet cable ✔
Instructions for use ✔
List of supported SFP modules
Certificates
Documentation
Reviews, links
Useful information
Problem solving, setup
NDMS V2 + Entware
Keenopt setup
OpenVPN setup
[Entware] Raise OpenVPN server
[Entware] Openvpn client on the router
Enable 802.11n standard on NDMSv2 firmware (via CLI TELNET)
Forced assignment of N mode (compatibility N) for Wi-Fi via CLI from enpa
Wordpress on Entware
How to print from phone to printer via Android OS
Flash modem in HiLink for maximum speed
CAT5 HiLink Speed ​​Test
All about IP Cloud (KeenDNS)
"White" IP from Rostelecom using Entware
Wake on Lan (WOL) function in ZyXEL Keenetic routers
A bit of theory on the mechanism of updating NDMSv2 firmware from _Danila_Master_
Yandex disk / WebDAV in ZyXEL Keenetic
Wi-Fi signal attenuation coefficients when passing through various environments
How to change the network name of the smartphone in Android?
EaseUS Partition Master Free is a handy program for partitioning a hard disk into partitions (suitable for creating a partition in ext3, creating two ntfs & ext3 partitions).
What type of file system and paging file is best to use? Enpa description
What type of file system and paging file is best to use? Option from miltt
Correction of the Transmission operation without reinstalling the router firmware from enpa
How to determine the type of antenna connector (SMA / RP-SMA)?
NTP SERVERS - time servers
Using the zram paging file (LZO) for the swap location from enpa
Creating an ISP (Internet Service Provider) interface via CLI (command line) from enpa
Lock site by name on the firmware from dezhik
If you need port 5 to distribute the Internet to devices on the wire from enpa
Speed ​​limit via CLI (command line) from enpa
PuTTY is a client program for working with network protocols SSH, Telnet, SCP, SFTP, for connecting via a COM port and ZModem, a utility for generating RSA and DSA digital SSH keys.
Solving the problem with ping in games specifically WOT for Wi-Fi from freealbert
WPS on a router - what it is and how to use it
Setting up a connection to a working VPN server using a "gray IP" at the provider from YEDkii
Forced assignment of speed on the port of the router through the CLI from enpa
Resetting factory settings (factory-reset) via CLI from enpa
2 ways to change the MAC address of a computer network card
The impact of USB 3.0 devices on the quality of data transmission over the air
ÎœTorrent client setup
Extending your home Wi-Fi network with Dalex-NEMAN ZyXEL PLA4201v2 EE powerline adapters
We fix the display of interfaces in the Connections section of enpa
Setting up remote access Transmission from enpa
Setting up and installing minidlna (1.1.6 + git-8a996b-1) opag-package from enpa
Configuring and installing the syslog-ng opkg-package for recording logs to external media from enpa
Firmware update using enpa CLI TELNET command line
Turning off the LEDs of the router using the CLA TELNET command line from enpa
Disabling the FN button LED using the enpa CLI TELNET command line
When adding a torrent, you can choose which files to download?
Solving display problems \ login by domain name (hostname) of Keenetic router in Windows 10 from enpa
Changing a Wi-Fi wireless channel in Keenetic using the enpa CLI TELNET command line
Configure automatic reboot using CLI TELNET by _Danila_Master_
Comments on the work of the Padavana TX Burst
Four Stream - Does the KN-1010 HT processor software support? Information from balian007
Installing and configuring Transmission 2.93 from Opkg Entware-3x for Keenetic Giga KN-1010 from enpa
Solving the problem of hard disk sleep using the OPKG package hdparm from balian007
Installing and configuring ntfs-3g-utils from Opkg Entware for Keenetic from enpa
Information about capacitors in KN-1010 \ KN-1810 from Ilya Khrupalov
Turn on seamless Wi-Fi roaming and block Internet advertising on Keenetic routers from hwp.ru
Selective bypass blocking on routers with Padavan and KeeneticOS firmware
We share USB drive via NFS protocol and IPTV broadcast to DLNA using playlists from face_ltd
How to mount a partition from NAS storage in a torrent client using OPKG Entware? by balian007
Setting push notifications and alerts from Keenetic router from enpa
Choosing a Wi-Fi system channel in a multi-apartment building, dense and uneven apartment utilization of channels by neighbors from Support Keenetic, ASilver1974
Connecting PON-terminal SERCOMM Routing mode in a KN-1810 from fixafixa
TTL lock
Keenetic Recovery
Instructions

Internet connection setup:

Install and configure KeeneticOS:

Reset:

Diagnostics:

Recovery firmware:

Reservation

Speed ​​Limit:

Remote access:

VLAN:

Forwarding and port configuration:

Wi-Fi setup:

WPS (Wi-Fi Protected Setup):

Security and DNS:

schedule :

Tunnels: PPTP, L2TP \ IPSec, IPSec, SSTP, OpenVPN, Wireguard, VPN-server:

File server and USB-drives:

FTP server:

BitTorrent Transmission Client:

DLNA:

Digital television:

USB printer:

CLI (command line), SSH:

Modes:

3G / 4G modems:

Digital telephony:

OPKG packages:

IntelliQoS:

Internet speed testing
http://www.speedtest.net/ru/
https://www.nperf.com/ru/
https://2ip.ru/speed/

Attention! Testing servers are provided by external providers and the results of such tests depend on many technical factors.

Test results from these services can only be used for diagnostic purposes.
Application to manage the router
Transmission Management Application
Firmware


The official version of KeeneticOS
KeeneticOS out of the box

2.11

2.12

2.13

2.14

2.15

3.00

3.01

3.03
Debug version of KeeneticOS
Debug - test (draft) release of the operating system. Repeats the functionality that is in the officially released versions of "Release" or "Beta", but also contains additional fixes and new features. The debug version is under development and may contain bugs.

  • Testing debug versions of KeeneticOS is carried out on the forum Keenetic -here.
  • Changelog of debug versions of KeeneticOS -here.
  • Binary files debug versions KeeneticOS, can be downloaded in Files Keenetic -hereandhere
The program for recovering firmware Keenetic Giga KN-1810.
KeeneticOS firmware catalog

The curator of the topic is enpa


Post has been editedenpa - 05.03.20, 01:31
Reason for editing: Stable version KeeneticOS 3.03.C.12.0-0 from 25.02.2020 to KN-1810



Rep: (33)
* enterfaza,
I have somewhere to put ultru2, so I will take



Rep: (1)
Hello!
Took KN-1810 instead of KN-1010, it was necessary since one Keenetic.
I understand the differences in these models only in the radio part. If the price increase is not confused, then with the future is better to take KN-1810. I hope that this backlog will be realized, since the last firmware there is Wi-Fi degradation.
For example, RT-AC86U at the same points Fitting router and client outputs the result to tens times the indicators KN-1010 and KN-1810. All possible actions and settings are done.
KN-1010 have to be used in conjunction with an access point Ubiquiti, and KN-1810 Apple AirPort Extreme.
Unfortunately, there is degradation in all my eight Keenetic'ah. The most obvious was in the Omni II, when the transition to the last of Delta, has led to what speed laptop connectivity, standing 2 meters away from the router, I went from 270 to 26 Mbit / s.



Rep: (178)
Incidentally, after the auto upgrade I found that included all of which have application filters: yandeksDNS, skayDNS, adguard ... Surfing the web browser on a PC through the wire significantly podlagiaal and generally unpleasant tupil. Turn off all filters at once became good.



Rep: (269)
KSereb @ 14.07.18, 22:20*
For example, RT-AC86U at the same points Fitting router and client outputs the result to tens times the indicators KN-1010 and KN-1810. All possible actions and settings are done.
KN-1010 have to be used in conjunction with an access point Ubiquiti, and KN-1810 Apple AirPort Extreme.
Unfortunately, there is degradation in all my eight Keenetic'ah. The most obvious was in the Omni II, when the transition to the last of Delta, has led to what speed laptop connectivity, standing 2 meters away from the router, I went from 270 to 26 Mbit / s.

Since the beginning of the use KN1010 not noticed nor any degradation to their customers - tablets / smarts / TV from Sams, Acer. There is only one piece in all Broadcom customers.
The maximum that squeezed 250-270Mbit. On one release was a problem where trying wi-fi Mediatek driver was v5.h but then returned back to v4.h. I passed KN1010 c 2.12 to 2.13
On Extra II last checked with Sams TB 4K as the problems are not noticed.
Again, if we consider that a forum about routers Keenetic users and 99% use them, then such a defect would have been a lot of posts here on ixbt and forum.keenetic.net



Rep: (1)
Why a simple router loads the memory, writes
Memory: 40%
Thus CPU utilization: 0-1%



Rep: (396)
* scati , CPU, memory unrelated processes.



Rep: (1)
NikIv @ 15.07.2018, 12:01*
* scati , CPU, memory unrelated processes.
This is understandable, just wondering why so many eats memory in a simple, couple of days ago when I bought it was a mere 22%



Rep: (20)
I think to take this router for the home and use it as a torrent-rocker, 4k film for TV, active torrents from about 10 to 20pcs.
How this will affect the operation of the router?
Will the iron to give a load to the Internet for 5-6 people at a time.
Especially if it is broadcasting 40 + GB of files on the TV at the moment.


Or this piece of hardware can not cope with my ambitions?

Although the manufacturer and businesses the opportunity -_-

With me +



Rep: (81)
* nightfox88, * You only in theory may say, the branch still quite empty, only appeared on the market *



Rep: (269)
scati @ 15.07.18, 11:47*
Why a simple router loads the memory, writes
Memory: 40%
Thus CPU utilization: 0-1%

KN1010 comparison
Without torrent service of WEB service shows "Memory 20% (51/256 Mb)" where used is used, free free, SHRD shared, buff buffers, caches cached is

Mem: 192252K used, 63772K free, 168K shrd, 2852K buff, 144040K cached
CPU: 0.0% usr 4.7% sys 0.0% nic 95.2% idle 0.0% io 0.0% irq 0.0% sirq

Mem: 192492K used, 63532K free, 168K shrd, 2852K buff, 144040K cached
CPU: 0.0% usr 2.2% sys 0.0% nic 97.7% idle 0.0% io 0.0% irq 0.0% sirq

/ # Cat / proc / meminfo
MemTotal: 256024 kB
MemFree: 63976 kB
Buffers: 2852 kB
Cached: 144040 kB
SwapCached: 0 kB
Active: 21324 kB
Inactive: 136356 kB
Active (anon): 10828 kB
Inactive (anon): 128 kB
Active (file): 10496 kB
Inactive (file): 136 228 kB
Unevictable: 0 kB
Mlocked: 0 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 10800 kB
Mapped: 15452 kB
Shmem: 168 kB
Slab: 18504 kB
SReclaimable: 1508 kB
SUnreclaim: 16996 kB
KernelStack: 800 kB
PageTables: 356 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 128012 kB
Committed_AS: 32368 kB
VmallocTotal: 1048372 kB
VmallocUsed: 5164 kB
VmallocChunk: 946 396 kB
/ #




Rep: (1)
Bought today, dnla reason movies in 4K come with podgruzku



Rep: (33)
* nightfox88,
Judging by the fact that iron is the same as ultre2 (except HF unit) I think that active torrents will swing at a speed of 4-6 mb / s, very much want to make a mistake.



Rep: (1)
And 5g speed cuts



Rep: (269)
blade102 @ 15.07.18, 14:11*
Bought today, dnla reason movies in 4K come with podgruzku
And 5g speed cuts

Start with the client that they may have received for a specific type of connection, the second check 5GHz configuration, start by selecting a channel, and the second with the band, etc.



Rep: (396)
* room31 , * room31 Tell us more what does not suit vayfay? Which customers, speed, coverage.



Rep: (1)
Why not tyane movies in 4K by dnla for wi-fi? Or should not? Lg tv

Post has been editedblade102 - 16.07.18, 07:45



Rep: (396)
* room31,
what conditions? Which customers? This is something incredible, to cut in the same room, of course, if the air is not 50ti neighboring points or strong broadband noise in the range.



Rep: (102)
Tarasus @ 14.07.18, 22:52*
Incidentally, after the auto upgrade I found that included all of which have application filters: yandeksDNS, skayDNS, adguard ... Surfing the web browser on a PC through the wire significantly podlagiaal and generally unpleasant tupil. Turn off all filters at once became good.

Sorry, but you have something to fantasize. All filters can be simultaneously installed, but is included can always be only one of them. By default. Of course, none of them is turned on. All of them are only small additions to the DNS-proxy, so erasing them (especially if no one was not included) does not solve anything. Placebo effect.



Rep: (102)
KSereb @ 14.07.18, 22:20*
KN-1010 have to be used in conjunction with an access point Ubiquiti, and KN-1810 Apple AirPort Extreme.
Unfortunately, there is degradation in all my eight Keenetic'ah.


* KSereb, it's amazing what you eight kinetics, ADR, and point ubikviti Airport. And only eight posts you ...
You can with the facts? What the delta that the speed drop by several times that of the customers? What are the "last" on ultru1810 firmware, if it is possible only as long as the factory firmware and the one on which it is immediately updated? Maybe you have a reference to support?

Posted on 16/07/2018, 10:51:

Suboru @ 15.07.18, 03:38*
Do I understand correctly that if you disable 2yu4 frequency is 5 Hz, only two antennas will work? the other two will not be active?

* Suboru, No, wrong, because both 4x4 chip have access to the antenna through the diplexers.



Rep: (116)
any differences from the Ultra II? It seems there is no sense or am I mistaken?


Full version    

Help     rules

Time is now: 21/03/20, 16:19