Archer C2 (AC750) - discussion | [usbmodem] [wifirouter]: 300 Mbit / s Mb / s - 433 Mb / s Mb / s + 4x1Gb | 1 p



Rep: (8)
Archer C2 (AC750) - discussion пїЅ
usbmodem wifirouter: 2.4GHz (300 Mbit / s Mbit \ s) - 5 GHz (433 Mbit / s Mbit \ s) + 4 • 1 Gbit \ s | USB: 1 USB 2.0 port (3G or 4G modem, printer, flash drive)


Attached Image

Description
Archer C2 (AC750) Dual Band Wi-Fi Gigabit Router with 802.11ac Wireless Support
Additional Images
Attached Image
Attached Image
Specifications
HARDWARE CHARACTERISTICS

Interface:
4 10/100/1000 Mbps LAN ports
1 10/100/1000 Mbps WAN port
1 USB 2.0 port
Buttons:
WPS / Reset button
Wireless On / Off Button
(Turn on / off wireless broadcast)
Power on / off button
(Power On / Off)
Antenna: 2 dual band antennas
External power supply: 12V DC / 1.5A
Sizes (ShhDhV): 230 x 144 x 35 mm
Antenna Type: Two dual-band removable antennas (RP-SMA connector)

PARAMETERS OF WIRELESS MODULE

Wireless standards:
IEEE 802.11ac / n / a 5 GHz
IEEE 802.11n / g / b 2.4 GHz
Frequency range (receive and transmit):
2400-2483.5 MHz
5150-5350 MHz
5650-5725 MHz
Transmission channel width:
5 GHz: up to 433 Mbps (only if the client device has the 11AC wireless adapter); up to 150 Mbps when working with 11N standard adapters;
2.4 GHz: up to 300 Mbps
Sensitivity (reception):
5 GHz:
11a 6 Mbit / s -91 dBm
11a 54 Mbps: -74 dBm
11ac HT20: -66 dBm
11ac HT40: -64 dBm
11ac HT80: -61 dBm
11n HT20: -71 dBm
11n HT40: -69 dBm
2.4 GHz:
11g 54M: -74 dBm
11n HT20: -72 dBm
11n HT40: -69 dBm
EIRP (wireless signal strength): <20 dBm or<100 mW
Wireless features: Enable / Disable Wireless Broadcast, WDS Bridge, WMM, Wireless Connection Statistics
Wireless network protection: Encryption Modes: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK
Firmware
Useful


There is no curator in the subject. For questions about filling the caps, contact the author in the QMS or the section moderators via the buttonA complaintunder the messages. How to do it right, what would you understand the first time, well describedhere.

Post has been editedferhad.necef - 27.02.20, 05:49
Reason for editing: "update" mode padavan firmware from linaro



Rep: (0)
herehttps://yadi.sk/i/b4X8MIbFQjG-lg

Posted on 06/11/2019 at 21:51:

and sohttps://yadi.sk/i/kDjM22u4rOIBCw



Rep: (0)
and sohttps://yadi.sk/i/wkKbr_sXz4UNxA



Rep: (445)
* genius1010,
You do everything wrong, spok.nochi. I will explain tomorrow.

Post has been editedvovan26_ - 11.06.19, 22:35



Rep: (0)
* vovan26_,
Ok, thanks.



Rep: (445)
* genius1010,
Download and install this program. :)
CH341A Programmer (Post vovan26_ # 83071216)



Rep: (0)
* vovan26_,
Yesterday I tried it again and it was sewn, I set it up. If possible, tell me where the error was for the future.



Rep: (0)
vovan26_ @ 06/12/19, 09:40*
genius1010,
Download and install this program.
CH341A Programmer (Post vovan26_ # 83071216)

downloaded and installed



Rep: (12)
* genius1010 Most likely, garbage was recorded in the bootloader, so you had to flash through the programmer

when flashing through tftp in the firmware file, before the firmware itself there must be a bootloader;



Rep: (45)
* genius1010 , a very interesting case. All tested before posting.
How do you manage to kill something? The benefit of the programmer was: i-m_so_happy:
And the flash was in my post for the programmer: drag:

Post has been editedsasha0597 - 13.06.19, 22:50



Rep: (0)
sasha0597 @ 05.22.19, 21:31*

I already have Padavan
1. Download the update.zip file (6.79 MB)

2. We pull out from the archive update.bin
3. We verify the hash update.bin - MD5: D42AA9BD3D981EDCE878E20D087295D6
4. Go to the web interface of the router
5. Administration>Firmware update
6. Select the update.bin file and click send.

* sasha0597,

where to do it in the programmer?



Rep: (45)
* genius1010 , what you just quoted to update the padawan. We are interested in the firmware for the programmer. She is in the same post which was quoted.

Programmer with a clothespin? Put it? Chip chosen in the program?



Rep: (0)
* sasha0597,
It means I did not understand



Rep: (45)
* genius1010 Do not know how to flash a chip? Write in a personal.



Rep: (0)
All already asked, thanks for all the help



Rep: (7)
Share sink iOS firmware for a Padawan to the TP-Link firmware via tftp



Rep: (445)
* melihov07,
How many times do you need to stick your nose that you need to specify the version of the iron?



Rep: (15)
Good day everyone, tell me where to dig? Router v1 firmware drain extreme Russian language. Recently I began to cut the speed with Google Play Store, just to 0.1kb / s. 2megabayta shakes 7 hours! Reset done. Firmware lowered / raised + reset - does not help! Where to dig?

PS. Put another router, still flies .... So it is not a provider



Rep: (7)
vovan26_ @ 25.06.19, 10:29*
How many times do you need to stick your nose that you need to specify the version of the iron?


Sorry. MEND)

Attached images
Attached Image



Rep: (445)
* melihov07,
It is enough to cut the header from the OF firmware at 0x0 - 0x200 and there will be a firmware for rollback and recovery.
Linux
dd if = original.bin of = tp_recovery.bin skip = 1 bs = 512
Attached Image


Post has been editedvovan26_ - 02.07.19, 18:41



Rep: (7)
Posted on 07/02/2019, 18:24:

vovan26_ @ 02.07.19, 18:10*
It is enough to cut the header from the OF firmware at 0x0 - 0x200 and there will be a firmware for rollback and recovery.


Yes, that is precisely the point that not whisking here and thought maybe someone ready to eat)

Post has been editedmelihov07 - 02.07.19, 18:24


Full version    

Help     rules

Time is now: 14/07/20, 11:42