Archer C2 (AC750) - discussion | [usbmodem] [wifirouter]: 300 Mbit / s Mb / s - 433 Mb / s Mb / s + 4x1Gb | 1 p



Rep: (7)
Archer C2 (AC750) - discussion »
usbmodem wifirouter: 2.4GHz (300 Mbit / s Mbit \ s) - 5 GHz (433 Mbit / s Mbit \ s) + 4 • 1 Gbit \ s | USB: 1 USB 2.0 port (3G or 4G modem, printer, flash drive)


Attached Image

Description
Archer C2 (AC750) Dual Band Wi-Fi Gigabit Router with 802.11ac Wireless Support
Additional Images
Attached Image
Attached Image
Specifications
HARDWARE CHARACTERISTICS

Interface:
4 10/100/1000 Mbps LAN ports
1 10/100/1000 Mbps WAN port
1 USB 2.0 port
Buttons:
WPS / Reset button
Wireless On / Off Button
(Turn on / off wireless broadcast)
Power on / off button
(Power On / Off)
Antenna: 2 dual band antennas
External power supply: 12V DC / 1.5A
Sizes (ShhDhV): 230 x 144 x 35 mm
Antenna Type: Two dual-band removable antennas (RP-SMA connector)

PARAMETERS OF WIRELESS MODULE

Wireless standards:
IEEE 802.11ac / n / a 5 GHz
IEEE 802.11n / g / b 2.4 GHz
Frequency range (receive and transmit):
2400-2483.5 MHz
5150-5350 MHz
5650-5725 MHz
Transmission channel width:
5 GHz: up to 433 Mbps (only if the client device has the 11AC wireless adapter); up to 150 Mbps when working with 11N standard adapters;
2.4 GHz: up to 300 Mbps
Sensitivity (reception):
5 GHz:
11a 6 Mbit / s -91 dBm
11a 54 Mbps: -74 dBm
11ac HT20: -66 dBm
11ac HT40: -64 dBm
11ac HT80: -61 dBm
11n HT20: -71 dBm
11n HT40: -69 dBm
2.4 GHz:
11g 54M: -74 dBm
11n HT20: -72 dBm
11n HT40: -69 dBm
EIRP (wireless signal strength): <20 dBm or<100 mW
Wireless features: Enable / Disable Wireless Broadcast, WDS Bridge, WMM, Wireless Connection Statistics
Wireless network protection: Encryption Modes: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK
Firmware
Useful


There is no curator in the subject. For questions about filling the caps, contact the author in the QMS or the section moderators via the buttonA complaintunder the messages. How to do it right, what would you understand the first time, well describedhere.

Post has been editeddevilfm - 09.05.18, 16:36



Rep: (8)
- hold the WPS / Reset button until the WPS indicator lights up (~ 10-15 seconds), then you can release the button


and what to do if wps does not light up?

Posted 04/04/2019, 20:22:

How is it going? What programmer bought and if there is an instruction how to sew them?


While away from the topic in view of strong employment. As I continue, I will write it off.



Rep: (1)
and what to do if wps does not light up?


Turn on the TFTPD prog, select the folder where the firmware was installed (well, the folder with the tftpd itself) and the main thing before launching the router, select its ip in TFTPD. And you just turn on the router with the wps button held down and I had to hold it for 10 seconds. The computer determined the router for a second, but if properly configured, it is enough for the program to pick up and install the firmware.



Rep: (8)
* melihov07 ,
No, in my case it does not help, nothing happens, the router is dead, it is necessary to rustle the programmer.



Rep: (8)
In general, I revived the animal with the help of the programmerCH341A
But bought on Avito.
Connect the clip without soldering. The truth had to suffer, the contact at the clip is very fucking, while the programmer is plugged into the USB - the loop will move a little and the clip will be lost from the contacts.

Filled OpenWrt recovery firmware found like somewherehere

Post has been editedolegr1 - 23.04.19, 10:05



Rep: (18)
Good evening, does anyone know how to set up a Rostelecom blocking bypass on a router, stock firmware



Rep: (34)
* Zalman99 , put Padavan, and read manuals. Their sea: happy:



Rep: (18)
* aciddon , I have an Archer C5 V4 router and I haven’t found the firmware from it



Rep: (34)
* Zalman99,
1. You are wrong topic.
2. Firmware from Padavan, prohibited for distribution, except for brands of ASUS.
3. Download Prometheus, and collect it yourself. But if there is no support, then alas.
4. OpenVRT does not seem to support your router either.
5. Here you can either change the router or put a VPN on each device, etc. I can be wrong.



Rep: (37)
2. Firmware from Padavan, prohibited for distribution, except for brands of ASUS.

why?



Rep: (2)
Is it possible in any way to flash the device with the EU (the latest available firmware was flashed) with microcode with US firmware? In standard ways this is not possible.
By the way, my device was originally the US region. Before a certain version of the firmware, it was possible to flash the US version with EU firmware and then come back, but at one point (first warned about it), having flashed a new (at that time) EU version, it was impossible to return back to the US. Well, I stayed with the EU version of the firmware on the originally US router. With this European firmware, constant problems started to arise, and I wondered if I could somehow return to the US firmware and try the last ones.



Rep: (34)
why?

Well, when I studied the topic, I read about it very often.
If something has changed, ask Mil Sorry.



Rep: (0)
Good evening. If you need someone, then I offer you the "update" of the padavan firmware mod fromlinaro :)

Differences from the assembled firmwaremerage :
Commit: 56960f9
Sawed out:
Appearance settings (standard theme is active. No others.)
Added by:
OpenSSH, OpenSSL, FTP, SFTP

Instructions:

I already have Padavan
1. Download the fileAttached fileupdate.zip(6.79 MB)

2. We pull out from the archive update.bin
3. Verify the hash of the update file..bin - MD5: D42AA9BD3D981EDCE878E20D087295D6
4. Go to the web interface of the router
5. Administration>Firmware update
6. Select the update file..bin and click send

I have stock
There are 2 options:
1. Tftpd64 (instructionin postmerage ).
Archive:Attached fileArcherC2V1_tp_recovery.zip(6.84 MB)

MD5 hash:D6DC9A7C7F74C22D1BA08156F0B77B20

2. Sew programmer (archive line above: yes2 :)


Attention: before upgrading Padavan, change the theme to the standard one, otherwise you will have to clean the cookies / cache, or the eternal page refresh will start on the web: D
I hope someone will find this useful;)

Post has been editedsasha0597 - 22.05.19, 20:04



Rep: (7)
I have no relation to microticism under any condition. Both asusovskaya and open wrt.

Trying to configure it client + up.



Rep: (0)
* ghl456 , you mean that Archer in AP client mode does not connect to the Mikrotik?

If I understood correctly, then in my case everything works on Padawan. OpenWRT did not check.
By the way, it is very stable: smile:

Post has been editedsasha0597 - 24.05.19, 22:47



Rep: (7)
Sasha0597 @ 05.22.19, 08:31*
Good evening. If you need someone, then I suggest you update the padavan firmware mod from linaro :)

Differences from the assembled merage firmware:
Commit: 56960f9
Sawed out:
Appearance settings (standard theme is active. No others.)
Added by:
OpenSSH, OpenSSL, FTP, SFTP

Instructions:

#
I already have Padavan

#
I have stock


Attention: before upgrading Padavan, change the theme to the standard one, otherwise you will have to clean the cookies / cache, or the eternal page refresh will start on the web: D
I hope someone will find this useful;)



But tell me, is there a dream in this beauty? regarding 3g modem, for example.
Or at least a reboot on a schedule.

Post has been editedghl456 - 29.05.19, 22:56



Rep: (0)
ghl456 , I did not quite understand what was meant by whatchdog for connecting via mob. network, but watchdog on the collapse of the kernel (hardware WatchDog) is present.
If you are interested in a reboot on a schedule, now I’ll stop by and check

upd: there are no separate features with a reboot, or I did not notice, but you can organize everything with a cron, the main thing is to be able to. On the Internet, everything can be found. The main thing in the endless reboot is not to send it: D all the same, time is lost.

Post has been editedsasha0597 - 29.05.19, 23:22



Rep: (7)
Sasha0597 @ 05.29.19, 12:13*
what is meant by whatchdog


I mean that when the Internet fell off on 3G, the router reboots on power. Than distorts dongle.



Rep: (77)
ghl456 @ 05/30/19, 14:09*
The router restarts on power. Than distorts dongle.

in order not to force the router, you can reset the power on the usb port.

Attached fileusbreset_padavan_mips.7z(36.97 KB)



Rep: (0)
* ghl456 , already answered below. So better and do



Rep: (7)
Butaford @ 05/30/19 03:19*
in order not to force the router, you can reset the power on the usb port.

Attached file usbreset_padavan_mips.7z (36,97 РљР‘)


possible for stupid manual how to screw this thing?


Full version    

Help     rules

Now: 07.21.19, 05:13