[X]Assistant

[devilfm]

Archer C2 (AC750)- discussion пїЅ
usbmodem wifirouter: 2.4GHz (300 Mbit / s Mbit \ s) - 5 GHz (433 Mbit / s Mbit \ s) + 4 • 1 Gbit \ s | USB: 1 USB 2.0 port (3G or 4G modem, printer, flash drive)

• In the subject are allForum Rulesor10 commandments novice who is hard to master the Rules of the Forum
  
• Discussion of devices not related to this topic is prohibited. If the theme you need for a specific model does not exist - create it.
  
• Instead of saying “Thank you!” Use+If you have less than 15 posts - click on the button.

  пїЅпїЅпїЅпїЅпїЅпїЅ download

  under the message where they helped you, and write thanks.
  
• Useful topics to note:Forum FAQ, How to search the forum?, How to remove the image under the spoiler.

Description

Archer C2 (AC750) Dual Band Wi-Fi Gigabit Router with 802.11ac Wireless Support

Additional Images

Specifications

HARDWARE CHARACTERISTICS

Interface:
4 10/100/1000 Mbps LAN ports
1 10/100/1000 Mbps WAN port
1 USB 2.0 port
Buttons:
WPS / Reset button
Wireless On / Off Button
(Turn on / off wireless broadcast)
Power on / off button
(Power On / Off)
Antenna:2 dual band antennas
External power supply:12V DC / 1.5A
Sizes (ShhDhV):230 x 144 x 35 mm
Antenna Type:Two dual-band removable antennas (RP-SMA connector)

PARAMETERS OF WIRELESS MODULE

Wireless standards:
IEEE 802.11ac / n / a 5 GHz
IEEE 802.11n / g / b 2.4 GHz
Frequency range (receive and transmit):
2400-2483.5 MHz
5150-5350 MHz
5650-5725 MHz
Transmission channel width:
5 GHz: up to 433 Mbps (only if the client device has the 11AC wireless adapter); up to 150 Mbps when working with 11N standard adapters;
2.4 GHz: up to 300 Mbps
Sensitivity (reception):
5 GHz:
11a 6 Mbit / s -91 dBm
11a 54 Mbps: -74 dBm
11ac HT20: -66 dBm
11ac HT40: -64 dBm
11ac HT80: -61 dBm
11n HT20: -71 dBm
11n HT40: -69 dBm
2.4 GHz:
11g 54M: -74 dBm
11n HT20: -72 dBm
11n HT40: -69 dBm
EIRP (wireless signal strength): <20 dBm or<100 mW
Wireless features:Enable / Disable Wireless Broadcast, WDS Bridge, WMM, Wireless Connection Statistics
Wireless network protection:Encryption Modes: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK

Firmware

Official Website - Download Page

Useful

Web interface emulator

There is no curator in the subject. For questions about filling the caps, contact the author in the QMS or the section moderators via the buttonA complaintunder the messages. How to do it right, what would you understand the first time, well describedhere.

Post has been editeddevilfm - 09.05.18, 16:36

[onmitt]

Who put the radiator on the chip, share your experience.

Post has been editedonmitt - 20.05.18, 22:18

[devilfm]

My results are SpeedTest. Internet Triolan, Kharkov.
The wire:
Download: 929.71 Mbit
Recoil: 940.13 Mbit
WiFi 5Ghz
Download: 248.30 Mbit
Recoil: 256.07 Mbit

Post has been editeddevilfm - 26.05.18, 23:29

[linaro]

If interested, then there is firmwarepadavanto your device.

Post has been editedlinaro - 27.05.18, 17:36

[u810310]

linaroIn fact, it’s interesting, however, after fumbling around the World, I found such a number of negative reviews about this router - and the speed cuts, and weak, and is not sewn properly with alternative firmware, and if you don’t really understand the question - the brick is almost guaranteed. On OpenWRT, there are some misunderstandings with the server ... Although there are ready-made options.
Could you help, as they say, “decide”: from the end user point of view, improvements are felt - then it hits, the speed is higher — or are these characteristics maximum at the drain? Is it worth some risk to kill the machine of possible gain? They are interested in these “landed” wins, but you will not explain the subtleties of setting to an ordinary person.
Or is the meaning of alternatives precisely in the variety of settings, and for those who do not need it, is it really better to sit on the drain exactly?

[linaro]

u810310 @ 06/03/18 10:09

Could you help, as they say, “decide”: from the end user point of view, improvements are felt - then it hits, the speed is higher — or are these characteristics maximum at the drain?

Ask abouthim. I have an Archer C20, so I cannot speak objectively about Archer C2.

With the openwrt server, everything is fine. This Roskomnadzor blocked their IP. How to set up a transparent bypass of locks (by the way, just on the router) - there were no more problems with the source code.

Post has been editedlinaro - 03.06.18, 11:29

[u810310]

linaro @ 06/03/18 11:20

This is Roskomnadzor

But he has long hands! Somewhere on the OpenWRT forums, some problems were mentioned on the server, due to which some of the archive of messages and uploads were lost, such as restoring ... But that’s what Archer C2 was about, nowmissing(pos. 1054). According to another version, the support of the model was allegedly discontinued due to the blocking of the runoff updates caused by overseas bans on excessive opportunities ... Plus"easy, simple, space profit"on a non-core resource and, most importantly, the answer there was “worn out, but restored like this” -copy-paste with translation, well, like advertising. And damn the circumstances are such that the flow is not enough, theoretical knowledge 0, x, experiment / unscientific tyk / brick is now unacceptable - andbegugly - and there is no clarity in the main thing: will it be better? I do not have enough coverage in terms of the reinforced concrete structure - both in a straight line and through the reinforced concrete channel, the former Asus RT-N11P (on the Padavan prosh, of course)) broke through - "another half-meter reinforced concrete wall and room behind it "further than this. Burned out at work: blush:

[devilfm]

u810310 @ 06/03/18 09:09

Or is the meaning of alternatives precisely in the variety of settings, and for those who do not need it, is it really better to sit on the drain exactly?

Well, I do not even know, here are my results on the stock firmware
http://www.speedtest.net/ru/result/7362444886

Attached images

Post has been editeddevilfm - 05.08.18, 13:53

[xperia10]

I have the first revision, the AC protocol with my Mac, iphone, appleTV is not friendly at all, constantly low speed, some interrupts, disconnected AC in general, now I tried the padavan firmware, everything became super, AC works as it should, speed 100+, so that those who had problems with the wi-fi connection, then it is definitely worth switching to padavan, and the interface is more pleasant and there are a lot of buns) Thank you very much, linarofor the works)

Post has been editedxperia10 - 22.08.18, 19:04

[bobr11]

I bought a router, for WiFi, it gives 20 Mbps at 100 stated by the provider, for Lan all the rules. Throw the firmware to fix it and what is the reason for the MB?

[Iskorkin]

xperia10,
Did you flash through tftp or what?

[xperia10]

Iskorkin @ 09/03/18 12:58

Did you flash through tftp or what?

Yes, via tftp, here is the instructionTP-Link Archer c20 - Discussion
All that is written in red applies to our routers of the first revision!

Post has been editedxperia10 - 03.09.18, 20:27

[J1ekc]

Something in my laptop is constantly losing the Wi-Fi signal (2.4 GHz), stupidly the SSID stops seeing (5 GHz is disabled), resetting the settings and flashing the router helped for a while, but then the connection became even more torn.
About 5 GHz: a friend came with the phone, first the bodies saw a signal at 5 GHz, and then stopped, now there is nothing to potent.
Now I’m thinking, either to take it under warranty (and this is how much brains soar), or try alternative stitching. Maybe there are more options, where to poke?

xperia10,
Could you drop the file of the assembled firmware to the thread?and everything read that nez ...

Post has been editedJ1ekc - 04.09.18, 18:05

[J1ekc]

Ie, until I created the irreparable, will it be possible to return to the stock? Is the instruction from the C20 topic relevant for our router? Is the stock loader file suitable?

[linaro]

J1ekc @ 09/05/2018, 13:57

Ie, until I created the irreparable, will it be possible to return to the stock? Is the instruction from the C20 topic relevant for our router? Is the stock loader file suitable?

You can return to stock. File loader will not suit you. You need to take it for your device. For example, from the stock firmware.

[J1ekc]

linaro @ 09/06/18 19:42

You need to take it for your device. For example, from the stock firmware.

tknte, pliz how to make it? HEX to pull out?

[linaro]

J1ekc @ 09/07/2018 09:14

...
tknte, pliz how to make it? HEX to pull out?

Here it can be used as a sample:PROMETHEUS (Post h31p # 75216259)
Only as a donor, the firmware should be from your device with the word boot in the name.

Post has been editedlinaro - 07.09.18, 20:51

[The_satellite]

I decided to upgrade to the firmware andy.padavan, and got a brick. I understand I missed this momentTP-Link Archer c20 - Discussion. Waiting for tips on the resurrection of the router.

[linaro]

The_Satellite @ 09/09/18, 19:02

Waiting for tips on the resurrection of the router.

If they sewed on tftp without a bootloader, then only the programmer. In the same post with your link there is material under the spoiler about which programmer is needed and a link to the post for recovery.

[The_satellite]

linaroIs the bootloader from that post suitable for the C2 AC750? Can I then combine it with an alternative firmware and sew it through a programmer? By the way, through the series something can be seen, but it is impossible to flash it. The programmer ordered I will wait, then accomplish your goal.

Post has been editedThe_satellite - 09.09.18, 21:31

[linaro]

The_Satellite @ 09/09/18, 21:28

By the way through the series that you can see

Drop the log of what serial gives out.

Here is the bootloader for your device:uboot_c2v1.zip(49.61 KB)

I corrected the update line for tftp with the following:

tftp 0x80060000 ArcherC2V1_tp_recovery.bin; erase tplink 0x20000 0x7a0000; cp.b 0x80080000 0x20000 0x7a0000

Now when updating via tftp, the bootloader will not be overwritten. It is also done on newer versions of tp-link devices.

Post has been editedlinaro - 10.09.18, 11:33