Main characteristics

The model index is KN-1610
The processor - MediaTek MT7628AN (MIPS24Kc) @ 580MHz
RAM - Winbond W9751G6KB-25 64 MB (DDR2)
Flash-memory - Winbond W25Q128CSIG 16 MB (Dual Boot, SPI)
Wi-Fi 2.4 + 5 GHz - Yes
Class Wi-Fi - MediaTek MT7603 2T2R / 300Mbps (2.4GHz) + MediaTek MT7612EN 2T2R / 867Mbps (5GHz)
Antennas - 4x 5dBi
Ethernet ports - 4x FE (10/100)
Wi-Fi / WPS button вњ”
Support module for Wi-Fi - Yes, with a switch on the housing

Model Index -KN-1611
The processor - MediaTek MT7628AN (MIPS24Kc) @ 580MHz
RAM -ESMT M14D1G1664A 128 MB (DDR2)
Flash-memory -Winbond 25Q256JVFQ 32 MB (Dual Boot, SPI)
Wi-Fi 2.4 + 5 GHz - Yes
Class Wi-Fi -MediaTek MT7603 2T2R / 300Mbps (2.4GHz) + MediaTek MT7613BEN 2T2R / 867Mbps (5GHz)
Antennas - 4x 5dBi
Ethernet ports - 5x FE (10/100)
Wi-Fi / WPS button вњ”
Support module for Wi-Fi - Yes, with a switch on the housing

Performance

2.4 GHz Wi-Fi network speed - 300 Mbps
5 GHz Wi-Fi network speed - 867 Mbps
IPoE / PPPoE Routing - Up to 95 Mbps
L2TP / PPTP Routing - Up to 95 Mbps

Functions and protocols

IPoE вњ”
PPPoE вњ”
PPTP вњ”
L2TP вњ”
802.1x
CABiNET вњ”
Multiple PPP Tunnels вњ”
PAP / CHAP / MS-CHAP / MS-CHAP v2 вњ”
MPPE (Auto / 40/56/128)
VLAN IEEE 802.1Q вњ”
Route Table (DHCP / Manual) вњ”
Link Duo вњ”
IntelliQoS вњ”
DHCP (client / server) вњ”
IPv6 Dual Stack вњ”
NAT вњ”
Igmp вњ”
UPnP
Manual port forwarding вњ”
PPTP / L2TP Transit вњ”
SPI DoS Attack Firewall вњ”
Ping checker вњ”

Wi-Fi wireless network

Seamless roaming 802.11 k / r / v вњ”
MU-MIMO * вњ”
Airtime Fairness * вњ”
Beamforming * вњ”
Pre-configured protection Wi-Fi вњ”
WEP, WPA-PSK вњ”
WPA2-PSK, WPA2-Enterprise вњ”
WPA3-PSK, WPA3-Enterprise, OWE вњ”
Multi-SSID and guest network вњ”
MAC access control вњ”
Wi-Fi Multimedia (WMM)

* Support for the KN-1611

Applications

Mobile application for Android and iOS вњ”
UDP to HTTP proxy вњ”
IPSec VPN Client / Server вњ”
PPTP VPN server 10 tunnels
Internet filter Yandex.DNS вњ”
Parental control SkyDNS вњ”
Dynamic DNS client вњ”

Physical characteristics and environmental conditions

Device dimensions without antenna, W x D x H - 159mm x 110mm x 29mm
Mass device - 236g
Operating temperature range - 0-40 В° РЎ
Humidity of the ambient air during operation - 20% - 95% (no condensation)
Power supply - 100–240 V 50/60 Hz

Diagnostics and control

Web configurator in Russian вњ”
Command Line (CLI) by TELNET
The ability to control from the external network вњ”
Backup and restore configuration вњ”
Software update features вњ”
Logging system events вњ”

Equipment

Device
Power adapter вњ”
Ethernet cable вњ”
Instructions for use вњ”

Internet connection setup:

• NetFriend Initial Setup Wizard
  
• Ways to connect to the Internet
  
• Ethernet connection to the Internet
  
• Internet connection via optics (SFP module)
  
• PPPoE Internet connection
  
• Connect to the Internet via PPTP or L2TP
  
• Connecting to the Internet via a 3G / 4G modem
  
• Connect to the Internet via ADSL
  
• Connect to the Internet via VDSL
  
• Configure a VDSL connection between two Internet centers
  
• Connecting to a Wi-Fi network (Wireless ISP)
  
• Other connections
  
• Connection Priorities
  
• Connecting home network devices
  
• Web Configurator (control panel)
  
• Instructions for the initial setup of Internet centers through the Quick Setup Wizard (for NDMS versions 2.11 and earlier)
  
• Self-configuring Keenetic to connect to the Internet via an Ethernet cable (for NDMS versions 2.11 and earlier)
  
• Internet Center and GPON-modem sharing options
  
• MTU value setting
  
• Configuring the network adapter MAC address cloning (for NDMS versions 2.11 and earlier)
  
• WAN MAC address change

Install and configure KeeneticOS:

• System monitor
  
• Host traffic monitor
  
• Network accelerator
  
• Windows network (file and printer access)
  
• Online Center Software Update
  
• Automatic update of the operating system
  
• Beta Software Update
  
• Installing and updating firmware by downloading the system file
  
• Saving startup-config configuration file
  
• Saving self-test system file
  
• Change the mode of operation and assignment of network connectors
  
• Purpose of buttons and indicators of the Internet center
  
• Indicator Management
  
• Users and access (how to change the administrator password)
  
• Description of the components of the Internet Center firmware
  
• Installing and upgrading NDMS versions by downloading a file (for NDMS versions 2.11 and earlier)
  
• Configuration files (system files)
  
• Updating the components of the Internet center through the mobile application My.Keenetic
  
• Installation of NDMS operating system components via a web interface (for NDMS versions 2.11 and earlier)
  
• Setting up Internet center user accounts
  
• Internet center light indicators control (for NDMS versions 2.11 and earlier)
  
• Why is Keenetic Internet Center unavailable at my.keenetic.net web address, but only at IP address?
  
• How to assign functions to the buttons that are located on the Keenetic case (for NDMS versions 2.11 and earlier)
  
• Variants of the DHCP server on the interfaces of the Internet center
  
• Option "Install updates automatically" (for NDMS versions 2.11 and earlier)

Reset:

• Resetting the Internet center and administrator password
  
• Resetting the Internet center and administrator password (using the Reset button)

Diagnostics:

• Diagnostics
  
• Collecting logs from the Keenetic system log when the device is unavailable (hang)
  
• Perform diagnostics (debugging) to resolve configuration issues or troubleshoot (for NDMS versions 2.11 and earlier)
  
• Saving configuration file, system log and diagnostic file (for NDMS versions 2.11 and earlier)
  
• Configure SNMP server
  
• Saving the log of system messages (logs) on the Syslog server
  
• Diagnostics of client and DHCP server operation
  
• Capture network packets using Wireshark
  
• Using the built-in network packet capture module (for NDMS versions 2.11 and earlier)
  
• How to find out port numbers for some services displayed on the Connections tab in the System Monitor?
  
• Setting speed / duplex parameters on the Ethernet port (for NDMS versions 2.11 and earlier)
  
• When do I need to collect network packet dumps from a computer or a router port?
  
• The ability to use one of the LAN ports as a WAN port in Keenetic Giga III / Ultra II

Recovery firmware:

• How to restore the operating system of the Internet center?
  
• KeeneticOS recovery method (for advanced users)

Reservation

• Connect to multiple providers and reserve online channel
  
• Setting up Internet reservations via 3G / 4G-modem
  
• Internet Accessibility Checker - Ping Check (for NDMS versions 2.11 and earlier)
  
• Simultaneous connection to two providers and reservation of the Internet channel (for NDMS versions 2.11 and earlier)

Speed ​​Limit:

• Speed ​​limit for home network devicesGuest Wi-Fi network
  
• Setting a speed limit for a home network device (for NDMS versions 2.11 and earlier)
  
• Connection speed limit for Guest Wireless devices (for NDMS versions 2.11 and earlier)
  
• How is the bandwidth of the Internet channel between the devices in the local Keenetic network?

Remote access:

• Domain Name Service KeenDNS
  
• An example of remote access to home network resources via KeenDNS
  
• Access to the Internet center via KeenDNS over HTTPS
  
• How to provide remote access to Keenetic Internet Center for technical support?
  
• Remote access via SSH to the Keenetic command line
  
• What is the difference between the "white" and "gray" IP-address?Using KeenDNS remote access service (for NDMS versions 2.11 and earlier)
  
• An example of remote access to home network resources via KeenDNS using domain names 4th level (for NDMS versions 2.11 and earlier)
  
• Setting up remote access to the Internet center from the Internet
  
• Remote access from the Internet to a home network computer connected via Keenetic (for NDMS versions 2.11 and earlier)
  
• An example of remote access to home network resources via the KeenDNS service when Keenetic operates in the Amplifier, Adapter or Access Point mode
  
• An example of remote access to home network resources via the KeenDNS service (using classic NAT rules)
  
• Wake device over network (Wake-on-LAN)
  
• Transfer the domain name KeenDNS to another Internet center

VLAN:

• Sharing tagged and untagged traffic on the WAN port of the Internet centerConfiguring simultaneous operation with tagged and untagged traffic
  
• Organization of several local networks with different main gateways
  
• Creation of several independent subnets on the local area network's Internet using VLAN
  
• Internet reservations between two Internet centers

Forwarding and port configuration:

• Port Forwarding
  
• Forwarding all ports to a local network host (organization of a DMZ host)
  
• Using Xbox and PS4 when connected via Keenetic
  
• Syntax and description of the ip static command to configure NAT network address translation
  
• What to do if port forwarding does not work?
  
• What to do if port forwarding does not work? (for NDMS versions 2.11 and earlier)
  
• When should you use port forwarding and firewall rules?
  
• Port forwarding through the VPN server’s Internet channel to a remote local network behind the VPN client
  
• Configuring port forwarding through a backup connection
  
• Configuring port forwarding in the Internet center (for NDMS versions 2.11 and earlier)
  
• Setting port forwarding in Keenetic to work correctly with the ВµTorrent program
  
• Configure forwarding of all ports to one computer in a local network (for NDMS versions 2.11 and earlier)
  
• How to replace the port number of the Internet center?
  
• Change of standard ports of control of the Internet center
  
• UPnP service

Wi-Fi setup:

• Wi-Fi seamless roaming
  
• Captive portal
  
• Connect to a Wi-Fi network
  
• How to change the name and password of the Wi-Fi network?
  
• 2.4 GHz wireless Wi-Fi network
  
• Wi-Fi 5 GHz Wireless Network
  
• General recommendations for the placement in the apartment of an Internet center with Wi-Fi interface for stable and high-quality wireless network
  
• What affects the operation of wireless networks, Wi-Fi? What could be a source of interference and what are their possible causes?
  
• Keenetic Wireless Power Level Indicator Scale
  
• Wireless connection to the Internet center from Windows 10
  
• Mobile device does not see the Wi-Fi network 5 GHz?
  
• Wi-Fi signal attenuation coefficients when passing through various environments
  
• Why is the Wi-Fi connection speed lower than stated?
  
• MAC address of the access point (BSSID) to connect
  
• Print a QR code to connect to a Wi-Fi network
  
• Wi-Fi network management with a button on the case
  
• Same network name (SSID) in the 2.4 / 5 GHz band
  
• The "Hide SSID" option in the access point settings
  
• Do I need to register an Internet center in Roskomnadzor?
  
• Guest Wi-Fi network
  
• Setting up a Wi-Fi guest wireless network (for NDMS versions 2.11 and earlier)
  
• Setting up an Internet center in WISP mode to work with an upstream access point or a Wi-Fi provider (for NDMS versions 2.11 and earlier)
  
• Selecting a wireless channel for the access point to work
  
• Real connection speed used in Wi-Fi technology
  
• How to scan a Wi-Fi network and determine the most free channel?
  
• How to set the direction of antennas on the Internet center of the Keenetic series?
  
• No internet access from the guest Wi-Fi network
  
• Create additional Wi-Fi access points
  
• What affects the change in the signal power parameter in the settings of the access point?
  
• Basic provisions of the IEEE 802.11ac standard
  
• Basic provisions of the IEEE 802.11n standard
  
• Setting the width of the wireless channel 20/40 MHz
  
• Ways to increase connection speed, bandwidth and stability of a wireless Wi-Fi network
  
• Possible malfunctions of the Wi-Fi network after connecting a USB 3.0 device to the Internet center
  
• Band steering
  
• Beamforming technology
  
• How the Band Steering mechanism works and why include it (for NDMS versions 2.11 and earlier)
  
• Differences in the 2.4 GHz and 5 GHz frequency bands

WPS (Wi-Fi Protected Setup):

• Connect to a Wi-Fi network using the WPS standard
  
• Quick WPS configuration (for NDMS versions 2.11 and earlier)
  
• Setting up a connection to the Internet center via Wi-Fi from a mobile device running Android OS using the WPS function

Security and DNS:

• How is the firewall implemented?
  
• Firewall
  
• Configuring Firewall Rules from the Command Interface
  
• Copy, move and delete multiple firewall rules
  
• The brute force protection feature for accessing the Internet Center
  
• Denying access to the web configurator from the guest network
  
• AdGuard DNS Internet Filter
  
• Internet filter Yandex.DNS
  
• Internet filter SkyDNS
  
• Home network protection and content filtering using the Yandex.DNS service (for NDMS versions 2.11 and earlier)
  
• Protect your home network and filter content using SkyDNS (for NDMS versions 2.11 and earlier)
  
• DDNS Domain Name
  
• Setting up and using the dynamic DNS service from No-IP
  
• Dynamic DNS Service Setup - DNS Master
  
• Using a firewall to provide different access rights to the Internet
  
• Examples of using firewall rules
  
• Examples of using firewall rules (for NDMS versions 2.11 and earlier)
  
• Internet access control feature on home network devices page
  
• How in the Internet center to block access to the Internet on port 80 (HTTP) to all users, except one, with the specified IP address?
  
• How to block access to a specific site?
  
• Configuring the Internet Center to block the access of the home network to a specific web resource (for NDMS versions 2.11 and earlier)
  
• How to block access to your own Internet center resources (web, cli, cifs, ftp, transmission) from the Guest Wireless Network?
  
• Configure Internet Center firewall rules that use a range of IP addresses or ports
  
• Examples of Internet center firewall rules that use port ranges
  
• When should you use port forwarding and firewall rules?
  
• Wi-Fi access control
  
• MAC access control for Wi-Fi wireless network (for NDMS versions 2.11 and earlier)
  
• In what order are the firewall rules executed?
  
• Using public DNS servers in the Internet center
  
• Firewall Description (for NDMS 2.11 and earlier)
  
• WPA2 KRACK vulnerability protection
  
• DNS over TLS and DNS over HTTPS protocols for encrypting DNS queries

schedule :

• Connection schedule
  
• Schedule home network devices
  
• Setting up schedules in the Internet center (for NDMS versions 2.11 and earlier)
  
• Parental Control: Disconnecting the Internet on a Schedule (for NDMS versions 2.11 and earlier)
  
• Disable all indicators on schedule
  
• Internet center reboot on schedule
  
• Schedule of firewall and port forwarding rules

Tunnels: PPTP, L2TP \ IPSec, IPSec, SSTP, OpenVPN, Wireguard, VPN-server:

• An introductory article about WireGuard VPN
  
• Wireguard tunnel interface and example settings VPN LANs connect two routers Keenetic
  
• Internet access Wireguard-tunnel
  
• Connection protocol Wireguard VPN from Android
  
• Connection Wireguard VPN protocol of iOS
  
• Connection Wireguard VPN protocol from Windows 10
  
• PC with Windows 7 connection to the remote network through the tunnel Keenetic Wireguard
  
• Connection Wireguard VPN protocol of Linux
  
• All about IPIP, GRE and EoIP tunnels (starting with firmware v2.08)
  
• Tuning IPIP, GRE and EoIP tunnels
  
• Setting up an IPSec VPN tunnel between the Internet hub and a Windows computer
  
• IPSec VPN client / server
  
• IPSec VPN tunnel organization between two Keenetic Internet Centers (for NDMS versions 2.11 and earlier)
  
• An example of creating IPSec connections using Windows operating system
  
• Connect Windows to IPsec Virtual-IP via Shrew VPN Client
  
• Setting up an IPSec VPN (IPSec Virtual IP) tunnel between Keenetic and a mobile device with Android OS
  
• Setting up an IPSec VPN tunnel (IPSec Virtual IP) between Keenetic and a mobile device with iOS
  
• Setting up an IPSec VPN (IPSec Virtual IP) tunnel between Keenetic and a Windows computer
  
• Setting up an IPSec VPN (IPSec Virtual IP) tunnel between Keenetic and a computer with Mac OS
  
• Combining two local area networks with gray IP addresses using Keenetic via vpnki
  
• PPTP VPN server
  
• Setting up a PPTP VPN server in Keenetic (for NDMS versions 2.11 and earlier)
  
• Creating a PPTP Connection in Windows OS to the Internet Center VPN Server
  
• Static IP address for user when connecting to Keenetic PPTP server
  
• Connection to the PPTP server of the Internet center for several users under one account
  
• How can I set up IPTV viewing through a connection to a PPTP server on the Internet center?
  
• Network Routing through VPN
  
• Connect two local networks using Keenetic Internet Centers using PPTP Server (for NDMS versions 2.11 and earlier)
  
• Connect to the VPN server of the Internet center to access a remote local network and to gain access to the Internet
  
• Features of connecting to the PPTP server of the Internet center from Windows
  
• Is it possible to connect more than two home networks with the help of Internet centers using PPTP Server?
  
• Port forwarding through the VPN server’s Internet channel to a remote local network behind the VPN client
  
• OpenVPN Client
  
• OpenVPN server
  
• Local area networking via OpenVPN
  
• An example of setting up access between local networks of Keenetic Internet Centers using the OpenVPN server located in the cloud hosting
  
• Is it possible to create an OpenVPN server like TAP?
  
• Using the OpenVPN client (for NDMS versions 2.11 and earlier)
  
• OpenVPN server on Keenetic (for NDMS versions 2.11 and earlier)
  
• Connecting via SSTP from Windows
  
• SSTP connection from Android
  
• SSTP VPN server
  
• L2TP / IPsec Client (L2TP over IPsec)
  
• Connecting to the integrated L2TP / IPSec VPN server from a device on iOS and Windows
  
• L2TP / IPsec connection example in Windows 7
  
• VPN server L2TP / IPsec
  
• Configuring Windows Firewall for connections from the network behind a Keenetic VPN server

Digital television:

• Setting up an IPTV connection (IPTV)
  
• Setting up Keenetic Internet Center for watching digital television (IPTV) (for NDMS versions 2.11 and earlier)
  
• UDP proxy
  
• Setting up IPTV viewing using the UDP Proxy function (UDP-HTTP proxy) (for NDMS versions 2.11 and earlier)
  
• Setting up access to the Internet and IPTV when the provider provides both services with tagged traffic (VLAN)
  
• How can I set up IPTV viewing through a connection to a PPTP server on the Internet center?
  
• Setting up Keenetic DSL Internet Center for IPTV
  
• The option of using the Internet center to watch IPTV, which comes to the GPON-modem
  
• Setting up an IPTV from Rostelecom when connected to the Internet via Ethernet
  
• Setting up simultaneous access to the Internet and IPTV service through two different providers
  
• Setting up access to the Internet and IPTV when the provider provides both services with tagged traffic (VLAN)

CLI (command line), SSH:

• Internet Center Command Line Interface (CLI)
  
• Terminal program for Windows
  
• Enabling Telnet and TFTP services in Windows
  
• Connect to the command line interface (CLI) of the Internet Center from Mac OS

Modes:

• Additional modes of operation
  
• Access Point Mode
  
• Amplifier Mode
  
• Adapter Mode
  
• Expansion of Wi-Fi network coverage in "Amplifier" mode (for NDMS versions 2.11 and earlier)
  
• How to configure the wireless bridge mode in the Internet center? (for NDMS versions 2.04)
  
• Access to the Keenetic web configurator when it works in one of the additional modes
  
• Ability to access the web configurator when Keenetic Lite III is in Access Point mode (for NDMS versions 2.11 and earlier)
  
• Internet center in the mode of a normal wireless access point (for NDMS version 2.04)
  
• Update NDMS OS when the Internet center is operating in the mode of a normal wireless access point
  
• An example of remote access to home network resources via the KeenDNS service when Keenetic operates in the Amplifier, Adapter or Access Point mode

IntelliQoS:

• IntelliQoS service
  
• Description of the setting and operation of the IntelliQoS function (for NDMS versions 2.11 and earlier)
  
• How is the bandwidth of the Internet channel between the devices in the local Keenetic network?

http://www.speedtest.net/ru/
https://www.nperf.com/ru/
https://2ip.ru/speed/

Attention! Testing servers are provided by external providers and the results of such tests depend on many technical factors.

Test results from these services can only be used for diagnostic purposes.