[X]Assistant

[enpa]

Keenetic Air (KN-1610)- Discussion
ZyXEL Keenetic Air - Discussion

Information

• Official Keenetic Community Firm Support Forum
  
• Official Support Center on Keenetic.net (registration is required)
  
• Registering a device on Keenetic.net (3 years warranty from the date of purchase + 1 year upon registration)
  
• Keenetic authorized service centers:Russia, Ukraine, Kazakhstan, Republic of Belarus
  
• Transmitter Power at Keenetic Home Internet Centers

Description

• Product Name:Air
  
• Part Number:KN-1610-01RU
  
• NDM HW ID:KN-1610

• Wi-Fi AC1200 2.4 + 5 GHz with high-precision 5 dBi printed antennas
  
• Any Internet tariffs up to 100 Mbps, MultiWAN, IPTV and Smart TV
  
• 4 modes of operation: Internet center, access point, adapter, Wi-Fi amplifier
  
• Switch on the case for easy setup in additional modes
  
• Yandex.DNS and SkyDNS: protection against cyber threats and parental control
  
• Configure and manage your home network via mobileattachment

Additional photo

[attachment = "12825174: a12.jpg"]








foto by enpa

Specifications

Main characteristics

The model index is KN-1610
The processor - MediaTek MT7628AN (MIPS24Kc) @ 580MHz
RAM - 64 MB (DDR2)
Flash Memory - 16 MB (Dual Boot)
Wi-Fi 2.4 + 5 GHz - Yes
Wi-Fi class - WiSoC 2T2R / 300Mbps (2.4GHz) + MediaTek MT7612EN 2T2R / 867Mbps (5GHz)
Antennas - 4x 5dBi (fixed ext)
Ethernet Ports - 4x FE (10/100), Mode Selector
Wi-Fi / WPS button вњ”
Modes of access point, amplifier, adapter - Yes, with a switch on the case

Performance

2.4 GHz Wi-Fi network speed - 300 Mbps
5 GHz Wi-Fi network speed - 867 Mbps
IPoE / PPPoE Routing - Up to 95 Mbps
L2TP / PPTP Routing - Up to 95 Mbps

Functions and protocols

IPoE вњ”
PPPoE вњ”
PPTP вњ”
L2TP вњ”
802.1x
CABiNET вњ”
Multiple PPP Tunnels вњ”
PAP / CHAP / MS-CHAP / MS-CHAP v2 вњ”
MPPE (Auto / 40/56/128)
VLAN IEEE 802.1Q вњ”
Route Table (DHCP / Manual) вњ”
Link Duo вњ”
IntelliQoS вњ”
DHCP (client / server) вњ”
IPv6 Dual Stack вњ”
NAT вњ”
Igmp вњ”
UPnP
Manual port forwarding вњ”
PPTP / L2TP Transit вњ”
SPI DoS Attack Firewall вњ”
Ping checker вњ”

Wi-Fi wireless network

WEP / WPA-PSK / WPA2-PSK Network Protection вњ”
Support for additional guest Wi-Fi network вњ”
WPS Quick Setup вњ”
Wi-Fi Multimedia (WMM)

Applications


Mobile application for Android and iOS вњ”
UDP to HTTP proxy вњ”
IPSec VPN Client / Server вњ”
PPTP VPN server 10 tunnels
Internet filter Yandex.DNS вњ”
Parental control SkyDNS вњ”
Dynamic DNS client вњ”

Physical characteristics and environmental conditions

Device dimensions without antenna, W x D x H - 159mm x 110mm x 29mm
Mass device - 236g
Operating temperature range - 0-40 В° РЎ
Humidity of the ambient air during operation - 20% - 95% (no condensation)
Power supply - 100–240 V 50/60 Hz

Diagnostics and control

Web configurator in Russian вњ”
Command Line (CLI) by TELNET
The ability to control from the external network вњ”
Backup and restore configuration вњ”
Software update features вњ”
Logging system events вњ”

Equipment

Device
Power adapter вњ”
Ethernet cable вњ”
Instructions for use вњ”

Certificates

RU C-TW.РђРЇ46. Р’.82580 (up to 10/26/2022) .pdf(3.34 MB)

RU00000034754 (up to 12/31/2025) .pdf(592.03 KB)

Documentation

Instructions for use KN-1610.pdf(435,07 KB)

Description and Specifications KN-1610.pdf(247.55 KB)

Reference CLI Command Interface KN-1610.pdf(3.87 MB)

Reviews, links

Keenetic Resources

Keenetic official website
Official Keenetic Block
VK official group
Official Facebook page
Instagram official page
Keenetic Telegram's Unofficial Channel
Information channel Keenetic firmware in Telegram
KeeneticOS Developer Forum

Reviews, tests, reviews

Full details of the Air KN-1610 on Keenetic.com
Keenetic Air KN-1610 on the market.yandex.ru
Review Keenetic Air (KN-1610). Dual-band apartment and office router from megaobzor.com

Useful information

Problem solving, setup

NDMS V2 + Entware
Keenopt setup
OpenVPN setup
[Entware] Raise OpenVPN server
[Entware] Openvpn client on the router
Enable 802.11n standard on NDMSv2 firmware (via CLI TELNET)
Forced assignment of N mode (compatibility N) for Wi-Fi via CLI from enpa
Wordpress on Entware
How to print from phone to printer via Android OS
Antenna Comfast CF-ANT2410DA for a place native to Keenetic II, Giga II
Flash modem in HiLink for maximum speed
CAT5 HiLink Speed ​​Test
All about IP Cloud (KeenDNS)
"White" IP from Rostelecom using Entware
Wake on Lan (WOL) function in ZyXEL Keenetic routers
A bit of theory on the mechanism of updating NDMSv2 firmware from _Danila_Master_
Yandex disk / WebDAV in ZyXEL Keenetic
Wi-Fi signal attenuation coefficients when passing through various environments
How to change the network name of the smartphone in Android?
EaseUS Partition Master Free is a handy program for partitioning a hard disk into partitions (suitable for creating a partition in ext3, creating two ntfs & ext3 partitions).
What type of file system and paging file is best to use? Enpa description
What type of file system and paging file is best to use? Option from miltt
Correction of the Transmission operation without reinstalling the router firmware from enpa
How to determine the type of antenna connector (SMA / RP-SMA)?
NTP SERVERS - time servers
Using the zram paging file (LZO) for the swap location from enpa
Creating an ISP (Internet Service Provider) interface via CLI (command line) from enpa
Lock site by name on the firmware from dezhik
If you need port 5 to distribute the Internet to devices on the wire from enpa
Speed ​​limit via CLI (command line) from enpa
PuTTY is a client program for working with network protocols SSH, Telnet, SCP, SFTP, for connecting via a COM port and ZModem, a utility for generating RSA and DSA digital SSH keys.
Solving the problem with ping in games specifically WOT for Wi-Fi from freealbert
WPS on a router - what it is and how to use it
Setting up a connection to a working VPN server using a "gray IP" at the provider from YEDkii
Forced assignment of speed on the port of the router through the CLI from enpa
Resetting factory settings (factory-reset) via CLI from enpa
2 ways to change the MAC address of a computer network card
Zyxel Keenetic Giga III + Zyxel Keenetic Plus DECT - Internet and telephony in the office from WOOF11
The impact of USB 3.0 devices on the quality of data transmission over the air
ОњTorrent client setup
Zyxel GIGA III router: setting up simultaneous work with several Internet channels from Sergei Golubitskiy (youtube video instruction)
Extending your home Wi-Fi network with Dalex-NEMAN ZyXEL PLA4201v2 EE powerline adapters
We fix the display of interfaces in the Connections section of enpa
Installing Keenetic Giga III in a private house from olezel
Setting up remote access Transmission from enpa
Setting up and installing minidlna (1.1.6 + git-8a996b-1) opag-package from enpa
Configuring and installing the syslog-ng opkg-package for recording logs to external media from enpa
Firmware update using enpa CLI TELNET command line
Turning off the LEDs of the router using the CLA TELNET command line from enpa
Disabling the FN button LED using the enpa CLI TELNET command line
When adding a torrent, you can choose which files to download?
Solving display problems \ login by domain name (hostname) of Keenetic router in Windows 10 from enpa
Using the WAN port as a LAN port in Keenetic Giga III \ Ultra II using the enpa CLI TELNET command line
Changing a Wi-Fi wireless channel in Keenetic using the enpa CLI TELNET command line
Configure automatic reboot using CLI TELNET by _Danila_Master_
Comments on the work of the Padavana TX Burst
Four Stream - Does the KN-1010 HT processor software support? Information from balian007
Installing and configuring Transmission 2.93 from Opkg Entware-3x for Keenetic Giga KN-1010 from enpa
Solving the problem of hard disk sleep using the OPKG package hdparm from balian007
Turn on seamless Wi-Fi roaming and block Internet advertising on Keenetic routers from hwp.ru

TTL lock

How to fix TTL
Management of TTL value for incoming (from provider) and outgoing (to provider) packets

Keenetic Recovery

Example of restoring service code (servicetag) from olegk1
Example of restoring service code (servicetag) from LuckyNeo
An example of recovery through the unsoldered connector of the router console from Must_Die
Example of firmware recovery with the replacement of the firmware file from Leonid28
Detailed instructions for restoring environment variables in ZyXEL Keenetic series Internet centers and new Keenetic series from _Danila_Master_

Instructions

Keenetic Support Center (articles, instructions)

Internet connection setup:

• NetFriend Initial Setup Wizard
  
• Ways to connect to the Internet
  
• Ethernet connection to the Internet
  
• Internet connection via optics (SFP module)
  
• PPPoE Internet connection
  
• Connect to the Internet via PPTP or L2TP
  
• Connecting to the Internet via a 3G / 4G modem
  
• Connect to the Internet via ADSL
  
• Connect to the Internet via VDSL
  
• Configure a VDSL connection between two Internet centers
  
• Connecting to a Wi-Fi network (Wireless ISP)
  
• Other connections
  
• Connection Priorities
  
• Connecting home network devices
  
• Web Configurator (control panel)
  
• Instructions for the initial setup of Internet centers through the Quick Setup Wizard (for NDMS versions 2.11 and earlier)
  
• Self-configuring Keenetic to connect to the Internet via an Ethernet cable (for NDMS versions 2.11 and earlier)
  
• Internet Center and GPON-modem sharing options
  
• MTU value setting
  
• Configuring the network adapter MAC address cloning (for NDMS versions 2.11 and earlier)
  
• WAN MAC address change

Install and configure KeeneticOS:

• System monitor
  
• Host traffic monitor
  
• Network accelerator
  
• Windows network (file and printer access)
  
• Online Center Software Update
  
• Automatic update of the operating system
  
• Beta Software Update
  
• Installing and updating firmware by downloading the system file
  
• Saving startup-config configuration file
  
• Saving self-test system file
  
• Change the mode of operation and assignment of network connectors
  
• Purpose of buttons and indicators of the Internet center
  
• Indicator Management
  
• Users and access (how to change the administrator password)
  
• Description of the components of the Internet Center firmware
  
• Installing and upgrading NDMS versions by downloading a file (for NDMS versions 2.11 and earlier)
  
• Configuration files (system files)
  
• Updating the components of the Internet center through the mobile application My.Keenetic
  
• Installation of NDMS operating system components via a web interface (for NDMS versions 2.11 and earlier)
  
• Setting up Internet center user accounts
  
• Internet center light indicators control (for NDMS versions 2.11 and earlier)
  
• Why is Keenetic Internet Center unavailable at my.keenetic.net web address, but only at IP address?
  
• How to assign functions to the buttons that are located on the Keenetic case (for NDMS versions 2.11 and earlier)
  
• Variants of the DHCP server on the interfaces of the Internet center
  
• Option "Install updates automatically" (for NDMS versions 2.11 and earlier)

Reset:

• Resetting the Internet center and administrator password
  
• Resetting the Internet center and administrator password (using the Reset button)

Diagnostics:

• Diagnostics
  
• Collecting logs from the Keenetic system log when the device is unavailable (hang)
  
• Perform diagnostics (debugging) to resolve configuration issues or troubleshoot (for NDMS versions 2.11 and earlier)
  
• Saving configuration file, system log and diagnostic file (for NDMS versions 2.11 and earlier)
  
• Configure SNMP server
  
• Saving the log of system messages (logs) on the Syslog server
  
• Diagnostics of client and DHCP server operation
  
• Capture network packets using Wireshark
  
• Using the built-in network packet capture module (for NDMS versions 2.11 and earlier)
  
• How to find out port numbers for some services displayed on the Connections tab in the System Monitor?
  
• Setting speed / duplex parameters on the Ethernet port (for NDMS versions 2.11 and earlier)
  
• When do I need to collect network packet dumps from a computer or a router port?
  
• The ability to use one of the LAN ports as a WAN port in Keenetic Giga III / Ultra II

Recovery firmware:

• How to restore the operating system of the Internet center?
  
• KeeneticOS recovery method (for advanced users)

Reservation

• Connect to multiple providers and reserve online channel
  
• Setting up Internet reservations via 3G / 4G-modem
  
• Internet Accessibility Checker - Ping Check (for NDMS versions 2.11 and earlier)
  
• Simultaneous connection to two providers and reservation of the Internet channel (for NDMS versions 2.11 and earlier)

Speed ​​Limit:

• Speed ​​limit for home network devicesGuest Wi-Fi network
  
• Setting a speed limit for a home network device (for NDMS versions 2.11 and earlier)
  
• Connection speed limit for Guest Wireless devices (for NDMS versions 2.11 and earlier)
  
• How is the bandwidth of the Internet channel between the devices in the local Keenetic network?

Remote access:

• Domain Name Service KeenDNS
  
• An example of remote access to home network resources via KeenDNS
  
• Access to the Internet center via KeenDNS over HTTPS
  
• How to provide remote access to Keenetic Internet Center for technical support?
  
• Remote access via SSH to the Keenetic command line
  
• What is the difference between the "white" and "gray" IP-address?Using KeenDNS remote access service (for NDMS versions 2.11 and earlier)
  
• An example of remote access to home network resources via KeenDNS using domain names 4th level (for NDMS versions 2.11 and earlier)
  
• Setting up remote access to the Internet center from the Internet
  
• Remote access from the Internet to a home network computer connected via Keenetic (for NDMS versions 2.11 and earlier)
  
• An example of remote access to home network resources via the KeenDNS service when Keenetic operates in the Amplifier, Adapter or Access Point mode
  
• An example of remote access to home network resources via the KeenDNS service (using classic NAT rules)
  
• Wake device over network (Wake-on-LAN)
  
• Transfer the domain name KeenDNS to another Internet center

VLAN:

• Sharing tagged and untagged traffic on the WAN port of the Internet centerConfiguring simultaneous operation with tagged and untagged traffic
  
• Organization of several local networks with different main gateways
  
• Creation of several independent subnets on the local area network's Internet using VLAN
  
• Internet reservations between two Internet centers

Forwarding and port configuration:

• Port Forwarding
  
• Forwarding all ports to a local network host (organization of a DMZ host)
  
• Using Xbox and PS4 when connected via Keenetic
  
• Syntax and description of the ip static command to configure NAT network address translation
  
• What to do if port forwarding does not work?
  
• What to do if port forwarding does not work? (for NDMS versions 2.11 and earlier)
  
• When should you use port forwarding and firewall rules?
  
• Port forwarding through the VPN server’s Internet channel to a remote local network behind the VPN client
  
• Configuring port forwarding through a backup connection
  
• Configuring port forwarding in the Internet center (for NDMS versions 2.11 and earlier)
  
• Setting port forwarding in Keenetic to work correctly with the ВµTorrent program
  
• Configure forwarding of all ports to one computer in a local network (for NDMS versions 2.11 and earlier)
  
• How to replace the port number of the Internet center?
  
• Change of standard ports of control of the Internet center
  
• UPnP service

Wi-Fi setup:

• Wi-Fi seamless roaming
  
• Captive portal
  
• Connect to a Wi-Fi network
  
• How to change the name and password of the Wi-Fi network?
  
• 2.4 GHz wireless Wi-Fi network
  
• Wi-Fi 5 GHz Wireless Network
  
• General recommendations for the placement in the apartment of an Internet center with Wi-Fi interface for stable and high-quality wireless network
  
• What affects the operation of wireless networks, Wi-Fi? What could be a source of interference and what are their possible causes?
  
• Keenetic Wireless Power Level Indicator Scale
  
• Wireless connection to the Internet center from Windows 10
  
• Mobile device does not see the Wi-Fi network 5 GHz?
  
• Wi-Fi signal attenuation coefficients when passing through various environments
  
• Why is the Wi-Fi connection speed lower than stated?
  
• MAC address of the access point (BSSID) to connect
  
• Print a QR code to connect to a Wi-Fi network
  
• Wi-Fi network management with a button on the case
  
• Same network name (SSID) in the 2.4 / 5 GHz band
  
• The "Hide SSID" option in the access point settings
  
• Do I need to register an Internet center in Roskomnadzor?
  
• Guest Wi-Fi network
  
• Setting up a Wi-Fi guest wireless network (for NDMS versions 2.11 and earlier)
  
• Setting up an Internet center in WISP mode to work with an upstream access point or a Wi-Fi provider (for NDMS versions 2.11 and earlier)
  
• Selecting a wireless channel for the access point to work
  
• Real connection speed used in Wi-Fi technology
  
• How to scan a Wi-Fi network and determine the most free channel?
  
• How to set the direction of antennas on the Internet center of the Keenetic series?
  
• No internet access from the guest Wi-Fi network
  
• Create additional Wi-Fi access points
  
• What affects the change in the signal power parameter in the settings of the access point?
  
• Basic provisions of the IEEE 802.11ac standard
  
• Basic provisions of the IEEE 802.11n standard
  
• Setting the width of the wireless channel 20/40 MHz
  
• Ways to increase connection speed, bandwidth and stability of a wireless Wi-Fi network
  
• Possible malfunctions of the Wi-Fi network after connecting a USB 3.0 device to the Internet center
  
• Band steering
  
• Beamforming technology
  
• How the Band Steering mechanism works and why include it (for NDMS versions 2.11 and earlier)
  
• Differences in the 2.4 GHz and 5 GHz frequency bands

WPS (Wi-Fi Protected Setup):

• Connect to a Wi-Fi network using the WPS standard
  
• Quick WPS configuration (for NDMS versions 2.11 and earlier)
  
• Setting up a connection to the Internet center via Wi-Fi from a mobile device running Android OS using the WPS function

Security and DNS:

• How is the firewall implemented?
  
• Firewall
  
• Configuring Firewall Rules from the Command Interface
  
• Copy, move and delete multiple firewall rules
  
• The brute force protection feature for accessing the Internet Center
  
• Denying access to the web configurator from the guest network
  
• AdGuard DNS Internet Filter
  
• Internet filter Yandex.DNS
  
• Internet filter SkyDNS
  
• Home network protection and content filtering using the Yandex.DNS service (for NDMS versions 2.11 and earlier)
  
• Protect your home network and filter content using SkyDNS (for NDMS versions 2.11 and earlier)
  
• DDNS Domain Name
  
• Setting up and using the dynamic DNS service from No-IP
  
• Dynamic DNS Service Setup - DNS Master
  
• Using a firewall to provide different access rights to the Internet
  
• Examples of using firewall rules
  
• Examples of using firewall rules (for NDMS versions 2.11 and earlier)
  
• Internet access control feature on home network devices page
  
• How in the Internet center to block access to the Internet on port 80 (HTTP) to all users, except one, with the specified IP address?
  
• How to block access to a specific site?
  
• Configuring the Internet Center to block the access of the home network to a specific web resource (for NDMS versions 2.11 and earlier)
  
• How to block access to your own Internet center resources (web, cli, cifs, ftp, transmission) from the Guest Wireless Network?
  
• Configure Internet Center firewall rules that use a range of IP addresses or ports
  
• Examples of Internet center firewall rules that use port ranges
  
• When should you use port forwarding and firewall rules?
  
• Wi-Fi access control
  
• MAC access control for Wi-Fi wireless network (for NDMS versions 2.11 and earlier)
  
• In what order are the firewall rules executed?
  
• Using public DNS servers in the Internet center
  
• Firewall Description (for NDMS 2.11 and earlier)
  
• WPA2 KRACK vulnerability protection

schedule:

• Connection schedule
  
• Schedule home network devices
  
• Setting up schedules in the Internet center (for NDMS versions 2.11 and earlier)
  
• Parental Control: Disconnecting the Internet on a Schedule (for NDMS versions 2.11 and earlier)
  
• Disable all indicators on schedule
  
• Internet center reboot on schedule
  
• Schedule of firewall and port forwarding rules

Tunnels: PPTP, L2TP \ IPSec, IPSec, SSTP, OpenVPN, VPN server:

• All about IPIP, GRE and EoIP tunnels (starting with firmware v2.08)
  
• Tuning IPIP, GRE and EoIP tunnels
  
• Setting up an IPSec VPN tunnel between the Internet hub and a Windows computer
  
• IPSec VPN client / server
  
• IPSec VPN tunnel organization between two Keenetic Internet Centers (for NDMS versions 2.11 and earlier)
  
• An example of creating IPSec connections using Windows operating system
  
• Connect Windows to IPsec Virtual-IP via Shrew VPN Client
  
• Setting up an IPSec VPN (IPSec Virtual IP) tunnel between Keenetic and a mobile device with Android OS
  
• Setting up an IPSec VPN tunnel (IPSec Virtual IP) between Keenetic and a mobile device with iOS
  
• Setting up an IPSec VPN (IPSec Virtual IP) tunnel between Keenetic and a Windows computer
  
• Setting up an IPSec VPN (IPSec Virtual IP) tunnel between Keenetic and a computer with Mac OS
  
• Combining two local area networks with gray IP addresses using Keenetic via vpnki
  
• PPTP VPN server
  
• Setting up a PPTP VPN server in Keenetic (for NDMS versions 2.11 and earlier)
  
• Creating a PPTP Connection in Windows OS to the Internet Center VPN Server
  
• Static IP address for user when connecting to Keenetic PPTP server
  
• Connection to the PPTP server of the Internet center for several users under one account
  
• How can I set up IPTV viewing through a connection to a PPTP server on the Internet center?
  
• Network Routing through VPN
  
• Connect two local networks using Keenetic Internet Centers using PPTP Server (for NDMS versions 2.11 and earlier)
  
• Connect to the VPN server of the Internet center to access a remote local network and to gain access to the Internet
  
• Features of connecting to the PPTP server of the Internet center from Windows
  
• Is it possible to connect more than two home networks with the help of Internet centers using PPTP Server?
  
• Port forwarding through the VPN server’s Internet channel to a remote local network behind the VPN client
  
• OpenVPN Client
  
• OpenVPN server
  
• Local area networking via OpenVPN
  
• An example of setting up access between local networks of Keenetic Internet Centers using the OpenVPN server located in the cloud hosting
  
• Is it possible to create an OpenVPN server like TAP?
  
• Using the OpenVPN client (for NDMS versions 2.11 and earlier)
  
• OpenVPN server on Keenetic (for NDMS versions 2.11 and earlier)
  
• Connecting via SSTP from Windows
  
• SSTP connection from Android
  
• SSTP VPN server
  
• L2TP / IPsec Client (L2TP over IPsec)
  
• Connecting to the integrated L2TP / IPSec VPN server from a device on iOS and Windows
  
• L2TP / IPsec connection example in Windows 7
  
• VPN server L2TP / IPsec
  
• Configuring Windows Firewall for connections from the network behind a Keenetic VPN server

Digital television:

• Setting up an IPTV connection (IPTV)
  
• Setting up Keenetic Internet Center for watching digital television (IPTV) (for NDMS versions 2.11 and earlier)
  
• UDP proxy
  
• Setting up IPTV viewing using the UDP Proxy function (UDP-HTTP proxy) (for NDMS versions 2.11 and earlier)
  
• Setting up access to the Internet and IPTV when the provider provides both services with tagged traffic (VLAN)
  
• How can I set up IPTV viewing through a connection to a PPTP server on the Internet center?
  
• Setting up Keenetic DSL Internet Center for IPTV
  
• The option of using the Internet center to watch IPTV, which comes to the GPON-modem
  
• Setting up an IPTV from Rostelecom when connected to the Internet via Ethernet
  
• Setting up simultaneous access to the Internet and IPTV service through two different providers
  
• Setting up access to the Internet and IPTV when the provider provides both services with tagged traffic (VLAN)

CLI (command line), SSH:

• Internet Center Command Line Interface (CLI)
  
• Terminal program for Windows
  
• Enabling Telnet and TFTP services in Windows
  
• Connect to the command line interface (CLI) of the Internet Center from Mac OS

Modes:

• Additional modes of operation
  
• Access Point Mode
  
• Amplifier Mode
  
• Adapter Mode
  
• Expansion of Wi-Fi network coverage in "Amplifier" mode (for NDMS versions 2.11 and earlier)
  
• How to configure the wireless bridge mode in the Internet center? (for NDMS versions 2.04)
  
• Access to the Keenetic web configurator when it works in one of the additional modes
  
• Ability to access the web configurator when Keenetic Lite III is in Access Point mode (for NDMS versions 2.11 and earlier)
  
• Internet center in the mode of a normal wireless access point (for NDMS version 2.04)
  
• Update NDMS OS when the Internet center is operating in the mode of a normal wireless access point
  
• An example of remote access to home network resources via the KeenDNS service when Keenetic operates in the Amplifier, Adapter or Access Point mode

IntelliQoS:

• IntelliQoS service
  
• Description of the setting and operation of the IntelliQoS function (for NDMS versions 2.11 and earlier)
  
• How is the bandwidth of the Internet channel between the devices in the local Keenetic network?

Internet speed testing

http://www.speedtest.net/ru/
https://www.nperf.com/ru/
https://2ip.ru/speed/

Attention! Testing servers are provided by external providers and the results of such tests depend on many technical factors.

Test results from these services can only be used for diagnostic purposes.

Application to manage the router

My.Keenetic (iOS) - provides management of basic settings and built-in services of Keenetic Internet Centers

My.Keenetic (Android) - provides management of basic settings and built-in services of Keenetic Internet Centers

Keenetic (Android) - beta version of the new application for managing routers Keenetic

Firmware

Table of current versions of KeeneticOS

Information about releases of KeeneticOS (Announcements of new versions of the embedded operating system with a list of changes)

The official version of KeeneticOS

KeeneticOS out of the box

Keenetic Air_KN-1610_2.10.C.2.0-4.zip(5.9 MB)

2.11

Stable version of the firmware 2.11.C.1.0-3 from 04/12/2018 for KN-1610

2.12

The official beta firmware version 2.12.B.0.0-0 dated 05.23.2018 for KN-1610

The official beta firmware version 2.12.B.0.0-2 dated 05.31.2018 for KN-1610

Stable firmware version 2.12.C.1.0-3 dated 08.08.2018 for KN-1610

2.13

The official beta firmware version 2.13.B.0.0-0 of 08/30/2018 for KN-1610

The official beta firmware version 2.13.B.0.0-2 of 09/07/2018 for KN-1610

Stable firmware version 2.13.C.0.0-1 dated 10/02/2018 for KN-1610

Stable version of the firmware 2.13.C.0.0-3 from 10/17/2018 for KN-1610

2.14

The official beta firmware version 2.14.B.0.0-1 dated 11/08/2018 for KN-1610

Stable firmware version 2.14.C.0.0-0 dated 12/03/2018 for KN-1610

Stable firmware version 2.14.C.0.0-4 from 12/26/2018 for KN-1610

2.15

The official beta version of the firmware 2.15.B.0.0-1 from 02/11/2019 for KN-1610

Stable firmware version 2.15.C.0.0-0 dated 02.28.2019 for KN-1610

Stable version of KeeneticOS 2.15.C.3.0-0 from 04/01/2019 for KN-1610

Stable version of KeeneticOS 2.15.C.4.0-1 from 05/16/2019 for KN-1610

Debug version of KeeneticOS

Debug - test (draft) release of the operating system. Repeats the functionality that is in the officially released versions of "Release" or "Beta", but also contains additional fixes and new features. The debug version is under development and may contain bugs.

• Testing debug versions of KeeneticOS is carried out on the forum Keenetic -here.
  
• Changelog of debug versions of KeeneticOS -here.
  
• Binary files of debug versions of KeeneticOS, you can download in Keenetic firmware storage -hereandhere.

The program for recovering firmware Keenetic Air KN-1610.

Keenetic-Air-KN-1610-Recovery.zip(6.03 MB)

KeeneticOS firmware catalog

• Keenetic firmware store on cloud.mail from enpa
  
• Keenetic firmware repository on yenpa.disk from enpa
  
• File storage from ndmsystems

The curator of the topic is enpa

Post has been editedenpa - 25.05.19, 17:51

Reason for editing: Keenetic (Android) - beta version of the new application for managing routers Keenetic

[safronoff343]

Hello. Connect the router tp-link n300 as an amplifier and it does not find keenetic. A lot of what is, but not keenetic. While other devices are connected easily to keenetic.
What's wrong?

[enpa]

safronoff343,which channel is put in setting up a basic wireless router? What is billed 802.11 mode of operation?

[enpa]

Official beta firmware version2.14.B.0.0-1 dated 11/08/2018for KN-1610

Component kit

base
easyconfig
config-ap
corewireless
ppp
config-client
pppoe
ydns
config-repeater
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
pingcheck
trafficcontrol
nortondns
ddns
safedns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes

2.14.B.0.0-1

Available for: Keenetic Air, Keenetic Start II, Keenetic Lite III rev.B., Keenetic Start (KN-1110), Keenetic Lite (KN-1310), Keenetic City (KN-1510), Keenetic Air (KN-1610),

New features and other improvements:

• Added the ability to simultaneously use WAN connections in balance mode
• Web interface: added Host Traffic Monitor
• Web-interface: added the function of printing a QR-code to connect to a Wi-Fi network
• Web-interface: fixed bugs
• KeenDNS: Added option "cloud access over IPv6" (does not require IPv6 on the device)
• VPN: increased number of tunnels
• Kabinet: added ability to set the server port

(c)http://service.ndmsystems.com/

Installation process and debug mode

1. Download firmware version 2.14.B.0.0-1
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.14.B.0.0-1 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Keenetic Air_KN-1610_2.14.B.0.0-1.zip(6.69 MB)

Mirror:
cloud.mail - v2.04-v2.14 (Test, Beta Firmware) All Keenetic
yandex.disk - v2.04-v2.14 (Test, Beta Firmware) All Keenetic

[enpa]

Stable firmware version2.14.C.0.0-0 from 12/03/2018for KN-1610

Component kit

base
easyconfig
config-ap
corewireless
ppp
config-client
pppoe
ydns
config-repeater
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
pingcheck
trafficcontrol
ddns
safedns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes

2.14.C.0.0-0

New features and other improvements:

• Added support for USB modems Alcatel IK40V; Huawei E5776; TELE2 ZTE MF920V MiFi
• Added the ability to simultaneously use WAN connections in balance mode
• KeenDNS: Added option "cloud access over IPv6" (does not require IPv6 on the device)
• Wi-Fi: added setting of the region option "Kazakhstan" for 5 GHz
• Wi-Fi: improvements in roaming
• Web interface: added Host Traffic Monitor
• Web-interface: integrated context help
• Web-interface: added the function of printing a QR-code to connect to a Wi-Fi network
• Web-interface: fixed bugs
• Transmission torrent client: updated to version 2.94
• Updated OpenSSL library
• VPN: increased number of tunnels
• Kabinet: added ability to set the server port

New features of Keenetic Plus DECT:

• Added auto dial function
• Added setting for early voice call encryption
• Added support for Panasonic KX-TGA806, Panasonic KX-TGA810, Panasonic KX-TGA550, Yealink W52P handsets
• Fixed the problem of replacing the outgoing call number when selecting a line through #
• Fixed export of calls to CSV

(c)https://help.keenetic.com/

Installation process and debug mode

1. Download firmware version 2.14.C.0.0-0
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.14.C.0.0-0 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disableshttps://help.keenetic.com/.
6. We send debug self-test fileofficial technical support.

KN-1610_stable_2.14.C.0.0-0.zip(6.44 MB)

Mirror:
cloud.mail - v2.04-v2.14 Firmware Keenetic
yandex.disk - v2.04-v2.14 Firmware Keenetic

[vladismrn]

Tell me what's the difference from the old air kn-1610? Or just a design change? That the differences found.

[enpa]

Stable firmware version2.14.C.0.0-4 from 12/26/2018for KN-1610

Component kit

base
easyconfig
config-ap
corewireless
ppp
config-client
pppoe
ydns
config-repeater
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
pingcheck
trafficcontrol
ddns
safedns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes

2.14.C.0.0-4

Corrections:

Fixed renewal of SSL certificates

(c)https://help.keenetic.com/

Installation process and debug mode

1. Download firmware version 2.14.C.0.0-4
2. Installby file upload.
3. Dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.14.C.0.0-4 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disabledebug mode.
6. We send debug self-test fileofficial technical support.

KN-1610_stable_2.14.C.0.0-4.zip(6.44 MB)

Mirror:
cloud.mail - v2.04-v2.14 Firmware Keenetic
yandex.disk - v2.04-v2.14 Firmware Keenetic

[Dm.vz]

Prompt, and how to adjust the width of the channel 160 MHz in the range of Wi-Fi 5 GHz? In the settings you can see the choice of values:
Channel width:
-20 MHz
-20/40 MHz
-20/40/80 MHz

Version Keenetic OS 2.14.C.0.0-4
Used in conjunction with the network card Intel Wireless AC-9260 160 MHz.

Or the device is not able to this at all? : Blush:

Post has been editedDm.vz - 12.01.19, 11:39

[enpa]

Dm.VZ,in this model does not support bandwidth of 160 MHz.

Post has been editedenpa - 12.01.19, 18:05

[enpa]

Official beta firmware version2.15.B.0.0-1 of February 11, 2019for KN-1610

Component kit

base
easyconfig
config-ap
corewireless
ppp
config-client
pppoe
ydns
config-repeater
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
pingcheck
trafficcontrol
ddns
safedns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes

2.15.B.0.0-1

Supported Models:

Keenetic Giga (KN-1010)
Keenetic Start (KN-1110)
Keenetic 4G (KN-1210)
Keenetic Lite (KN-1310)
Keenetic Omni (KN-1410)
Keenetic City (KN-1510)
Keenetic Air (KN-1610)
Keenetic Extra (KN-1710)
Keenetic Ultra (KN-1810)
Keenetic Viva (KN-1910)
Keenetic DSL (KN-2010)
Keenetic Duo (KN-2110)
Zyxel Keenetic Start II
Zyxel Keenetic Lite III rev.B
Zyxel Keenetic 4G III rev.B
Zyxel Keenetic Giga III
Zyxel Keenetic Ultra II
Zyxel Keenetic Air
Zyxel Keenetic Extra II

Beta version is the official release of updated components that have undergone internal testing and are at the stage of final debugging.

To install the beta version, we recommend updating the Internet Center from mobile devices via the My.Keenetic application or the web configurator.

New features and improvements:

The component "Wi-Fi system controller" has been added to automatically control access points connected via cable;
Implemented support for 802.11v WNM BTM (BSS Transition Management);
Fixed PMK-R1 key exchange problems in FT roaming;
Implemented traffic monitor for arbitrary registered devices;
Implemented ACMEv2 protocol and getting wildcard certificates for KeenDNS domain names;
A form for accepting an End-user License Agreement has been added to the Quick Setup Wizard;
Added support for new Keenetic mobile app;
The automatic connection mode ADSL / VDSL (models KN-2010, KN-2110) is implemented;
Added support for USB modems MTS 872FT, MTS 874FT, MTS 835FT (MF920T) (for models with USB port);
Additional modes: port 0 has been added to the segment settings (for Keenetic Giga III, Ultra II, Giga, Ultra and Viva);
Fixed 802.1p packet transmission with zero VLAN ID;
The implementation of the SMB / CIFS server has been changed from CIFS NQ to Tuxera SMB (for models with USB storage support):
- Support for durable filehandles (launch applications from a network drive, etc.);
- Support master browser function;
- Support for Windows Backup;
- Support for Apple Time Machine.

New features Zyxel Keenetic Plus DECT:

Added support for Panasonic KX-TG7175, Panasonic KX-TG8562, Panasonic KX-PRXA10;
The correct display of numbers with an extension set on CAT-iq 2 handsets is implemented;
Implemented limiting line selection through # in accordance with the rules of dialing;
Fixed problem when re-copying call history or phone book;
Fixed replacing the outgoing call number when the replacement rule contains T;
Fixed line selection through # when dialing one character at a time.

(c)https://help.keenetic.com/

Installation process and debug mode

1. Download firmware version 2.15.B.0.0-1
2. Installby file upload.
3. Check the work.

If after installing 2.15.B.0.0-1 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disabledebug mode.
6. We send debug self-test fileofficial technical support.

KN-1610_beta_2.15.B.0.0-1.zip(6.74 MB)

Mirror:
cloud.mail - v2.04-v2.15 (Test, Beta Firmware) All Keenetic
yandex.disk - v2.04-v2.15 (Test, Beta Firmware) All Keenetic

Post has been editedenpa - 12.02.19, 13:25

[Old 47]

I bought this router in December 2018. Worked 2 weeks and gone online. Deleted connect via webcam and connected provider again, there was an Internet. Such troubles occur several times a week or even a day. Exchanged letters with support, send them files with the tests. Has watched that answer. Inet from MTS. Today, off the Internet again, no faults and restarting did not help. I took out an old tp-link it all works. Kinetic like that can be controlled so that the child did not climb anywhere and when you want to access remotely zablokiroaat.

Post has been editedOld 47 - 13.02.19, 16:52

[balian007]

STARYY47 @ 02/13/19, 16:48

I bought this router in December 2018. Worked 2 weeks and gone online. Deleted connect via webcam and connected provider again, there was an Internet. Such troubles occur several times a week or even a day. Exchanged letters with support, send them files with the tests. Has watched that answer. Inet from MTS. Today, off the Internet again, no faults and restarting did not help. I took out an old tp-link it all works. Kinetic like that can be controlled so that the child did not climb anywhere and when you want to access remotely zablokiroaat.

You like to have answered, that waits for a response from the support, without seeing logs is difficult to say that you have and how vskidku usually the words
.... gone online. Deleted connect via webcam and connected provider again, there was an Internet. Such troubles occur several times a week or even a day ..... He took an old tp-link it all works ....
most likely a problem with DNS or as a result of using filters - Yandex, Sky or Adguard, can check for example on your client disabling it but here I think will not help, but if you remove the filter for all clients, then you can clearly tell what and how. Again, this is guesswork without seeing your router settings. Well, the update to the current release and wait a bit.

[enpa]

Old 47,at a time when access to the Internet is lost, immediately goes to the router settings and shootingself-test file, sendin support ofa description of the problem.

[Old 47]

Night stood off in the morning on, Inet wound. Filters nothing to do with. He behaves without filters. We provider periodically changing ip router and probably at some point can not get a new ip (this is purely speculation on my part).

[enpa]

Stable firmware version2.15.C.0.0-0 dated February 28, 2019for KN-1610

Component kit

base
easyconfig
config-ap
corewireless
ppp
config-client
pppoe
ydns
config-repeater
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
pingcheck
trafficcontrol
ddns
safedns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes

2.15.C.0.0-0

New features and improvements:

The component "Wi-Fi System Controller" has been added to automatically control access points connected via cable;
Implemented 802.11v WNM BTM (BSS Transition Management) support for seamless Wi-Fi roaming;
Fixed PMK-R1 key exchange problems in FT roaming;
Implemented traffic monitor for arbitrary registered devices;
Implemented ACMEv2 protocol and getting wildcard certificates for KeenDNS domain names;
A form for accepting an End-user License Agreement has been added to the Quick Setup Wizard;
For DSL (KN-2010) and Duo (KN-2110) models, the ADSL / VDSL automatic connection mode is implemented;
Added support for USB modems MTS 872FT, MTS 874FT, MTS 835FT (MF920T) (for models with USB port);
Additional modes: port 0 has been added to the segment settings (for Keenetic Giga III, Ultra II, Giga, Ultra and Viva);
Fixed 802.1p packet transmission with zero VLAN ID;
Fixed counters for OpenVPN connections;
Fixed possible loss of settings for L2TP / IPsec and Virtual IP;
Added support for new Keenetic mobile application (beta testing);
Added support for Tuxera SMB SMB / CIFS server (beta testing) (for models with USB storage support).

Advantages of Tuxera SMB:

Support for Durable Filehandles (launch applications from a network drive, etc.);
Master Browser function support;
Support for Windows Backup;
Apple Time Machine support.

New features of Keenetic Plus DECT:

Added support for Panasonic KX-TG7175, KX-TG8562, KX-PRXA10, KX-TCD450, KX-TGA810, KX-TCA130, KX-TGC310, KX-TGA661, KX-TCA155, KX-TCA125, KX-TCA120; Gigaset 2000S, 3000C;
The correct display of numbers with an extension set on CAT-iq 2 handsets is implemented;
Implemented limiting line selection through # in accordance with the rules of dialing;
Fixed problem when re-copying call history or phone book;
Fixed replacing the outgoing call number when the replacement rule contains T;
Fixed line selection via # when dialing one character at a time;
Fixed problems with Yealink W52H;
Fixed problems with the work lines without registration;
Fixed errors when editing the number containing the dialing rule;
Fixed errors in reading CAT-iq base settings with 2 handsets;
Fixed display on the handset settings redirect incoming call timeout;
Fixed the phone book with a contact without a last name.

(c)https://help.keenetic.com/

Installation process and debug mode

1. Download firmware version 2.15.C.0.0-0
2. Installby file upload.
3. Check the work.

If after installing 2.15.C.0.0-0 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disabledebug mode.
6. We send debug self-test fileofficial technical support.

KN-1610_stable_2.15.C.0.0-0.zip(6.81 MB)

Mirror:
cloud.mail - v2.04-v2.15 Firmware Keenetic
yandex.disk - v2.04-v2.15 Firmware Keenetic

[IceSlam]

People, Good day! The trouble is this, bought today is a miracle, brought it home, set up AC900 and ... literally 10 meters through walls 2.5 - go out on the balcony - 5G signal drops to a minimum and the phone barely barely sees it ... This is the norm for standard or 5G same with my monster is something wrong?

[Vitalk031]

IceSlam @ 4.03.19, 1:00

The trouble is this, bought today is a miracle, brought it home, set up AC900 and ... literally 10 meters through walls 2.5 - go out on the balcony - 5G signal falls to a minimum, and the phone barely barely sees it ...

Honest ten meters or even two and a half brick wall enough that drown out the signal of the Wi-Fi router in the 5 GHz band.

[IceSlam]

Vitalk031 @ 04.03.19, 01:40

Honest ten meters or even two and a half brick wall enough that drown out the signal of the Wi-Fi router in the 5 GHz band.

it is specifically a problem of this model, or any router in this price range with a 5 GHz?

[Vitalk031]

IceSlamRather, the 5 GHz band. But do not worry much because of the low signal level, the most important is the speed with which the device "talks" with the router, although this value is not accurate. Even better correct the situation, if the device is in MIMO, the two streams will greatly increase the speed.

[IceSlam]

Vitalk031,By the way on this issue ... "867 Mbit / s to 80 MHz 11ac 2x2" - this gives the router in the list of devices in my S9 and telly LG Smart TV, but as I already said ... the signal is weak ... I play here with two functions (802.11r and 802.11k / v), but to sense zero - nine of every 10 seconds, reconnect
P.S. And bandwidth satisfied ... On the old castrated bank DIR-300A with castrated firmware barely 30mbit / s to gain speed ... and then steadily from the phone to 5G outputs 100ku (maximum rate)
P.P.S. But since it features WiFi 5, then okay, but I have tomorrow router into boutiques like bear has changed ...
Thank you so much

Post has been editedIceSlam - 04.03.19, 02:30

[_mad_]

IceSlam,
yes, 5 Hz likes walls) 2.4 in this respect even better spreading
so here you can still experiment with the location of the router, if possible
deliver higher (from 1.5 meters above the floor) and in any place where maximum and minimum line of sight obstructions to all parts of the home)