- Perform the preparation process as described above, if not done this before
- Download the self TWRP
TWRP for Power 3s from nemo-nemoor
TWRP for Power 3s from jemmini;---
TWRP power 3and scatter file
MT6763_Android_scatter.txt(13.85 KB)
- Create TWRP folder in a convenient location, but the same content without the Cyrillic alphabet, put to both files, rename the file in TWRP himself recovery.img
- Open Flash Tool act similarly as the firmware
- After opening the scatter file from the folder in our TWRP proshivalschika window with a list of checked files should stand just across from recovery
- Click Download connect the phone off, wait until the end of the disabled.
-
Attention! After flashing TWRP not switch on the phone! You need to immediately go to the very rekaveri!
- Hold the volume up button (+) and once the power button, hold until the bootloader menu]
- Select the Volume Up (+) item recovery, confirm selection by pressing the volume down (-) must be loaded our TWRP
- At the initial screen, we are invited to make changes to the system that would work TWRP, making agree swipe from left to right below (move the switch)
- After downloading if the message with the password entry screen, refuse, now we need to reformat the internal drive
- Go to the menu Cleaning out there from the bottom right corner to see format data, press, will appear warning that all files and programs that are on the internal drive will be erased, we agree (or not, it is already possible to go back in all the copy to the SD card or on the PC after return to rekaveri) enter yes or The command, then reboot rekaveri and can already use our fully TWRP