Assistant
REPLY |
![]() |
Message#1 ![]() | |
Novice ![]() ![]() ![]() [offline] Group: Active users Messages 48 Check in: 02.06.15 Apple iPhone 4S Reputation: ![]() ![]() | DiscussionNomi C070012 Corsa 3 ![]() Discussion �
Specifications Screen view Capacitive Screen diagonal 7" RAM 1 GB Wireless capabilities Wi-Fi Bluetooth 3G (UMTS) operating system Android 7.0 Internal memory 16 GB Screen resolution 1280x800 Number of Cores 4 CPU MediaTek MT8321 (1.3 GHz) Rear camera 2 Mp Navigation system GPS Matrix type IPS Front-camera 0.3 MP Memory card support microSD / microSDHC Maximum capacity of memory cards 32 GB Built-in 3G module there is SIM card dimensions Ordinary The ability to make calls there is Connectors Type C 3.5 mm plug 2 SIM card slots Body material Plastic + metal Additional functions OTG support additional characteristics GPS Navigation: GPS, A-GPS Wi-Fi: 802.11 b / g / n Bluetooth 4.0 Battery 2500 mAh battery Width 107.5 mm Height 186 mm Depth 8.48 mm Weight 265 g Useful There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the button ![]() Post has been editedMgalex - 06.01.19, 18:33 Reason for editing: Resetting Google Account (FRP) in FlashTool |
Message#2 ![]() | |
Novice ![]() ![]() ![]() [offline] Group: Active users Messages 48 Check in: 02.06.15 Apple iPhone 4S Reputation: ![]() ![]() | SP Flash Tool Firmware Information The firmware is made on the basis of a dump from my tablet. Firmware version Nomi_C070012_20171113 Instruction Download the archive with the firmware and extract it to any place convenient to you (it is important that there are no folders with Russian names on the way to the firmware) Launch SP Flash Tool In the Scatter-loading File field, specify MT6580_Android_scatter.txt, which is located in the folder with the extracted firmware Press the Download button and connect the switched off tablet via USB cable. If the drivers are installed correctly, the firmware will go on (first red bar, then yellow) The firmware process lasts for some time, at the end of the firmware a window will appear with a check mark. Then we turn off the tablet, hold down the VOL + and POWER keys, go to Recovery Mode and do Wipe Data / factory reset, then reboot the tablet. Download Post has been editedl7p705s - 05.04.18, 17:29 |
Message#3 ![]() | |
Novice ![]() ![]() ![]() [offline] Group: Active users Messages 48 Check in: 02.06.15 Apple iPhone 4S Reputation: ![]() ![]() | TWRP and Root Instruction Extract the contents of the archive to the root of the disk (any) Launch SP Flash Tool version 5.1744.00.000 (you can downloadhere) In the scatter-loading file field Select the previously extracted MT6580_Android_scatter.txt Press the Download button, connect the disabled tablet to the computer (will offer to install the driver if it has not been previously installed) and wait until the end of the firmware. How to enter recovery To enter recovery, hold and hold the power button and volume + until the menu appears and select Recovery Mode (navigate through the menu with the volume + button to select the desired menu item, press the volume -, when you enter, you must select Swipe to allow modifications) For help in creating the firmware and for the files of recovery and root, I want to express my gratitude to the user separatelymr.dinu Post has been editedAlexanderL - 05.04.18, 22:00 Reason for editing: integrated posts |
Message#4 ![]() | |
del ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() [offline] Group: Honorary Gameday Messages 15780 Check in: 12.02.13 Meizu 16th 6/64 Reputation: ![]() ![]() | M Topic moved to subsectionNomi -------------------- MoreI am not a moderator. For questions related to the forum, you are happy to answer existingModerators of the section "Android - Devices" |
Message#5 ![]() | |
Novice ![]() ![]() ![]() [offline] Group: Active users Messages 48 Check in: 02.06.15 Apple iPhone 4S Reputation: ![]() ![]() | Work Xposed. After receiving Ruth's rights to install Xposed Installer, then go into the application, agree with the security warning for the device. Then click the install or update button, select install, wait for the process to finish, click Reboot now. The first download will be long. Attached files ![]() |
Message#6 ![]() | |
TWRP ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() [offline] Group: Curators Messages 3708 Check in: 21.02.15 Xiaomi Redmi 4X 3/32 Reputation: ![]() ![]() | TWRP 3.2.1 ��� Nomi C070012 Corsa 3 download:![]() Recovery collected on the basis of the Android 7.0 kernel kernel version nomi_C070012_v01_20171116 / 2017 11 20 星期一 17:10:57 CST ATTENTION!! After installing the recovery, provided that changes are allowed in the system, the installation of ROOT is mandatory, otherwise the system will not boot. GettingROOT To get ROOT install this patch from TWRP: ![]() Stock and recovery What does not work If "does not see the internal memory" (it can not decrypt the / data partition and asks TWRP password when starting), then the solution is to format the partition (Purge ->Selective cleaning ->/ data (format data)). (while losing all your data and programs!) Attached files ![]() -------------------- Xiaomi Redmi 4X 3/32 |
Message#7 ![]() | |
a guest ![]() [offline] Group: Users Messages 3 Check in: 11.04.18 Reputation: ![]() ![]() | Hello. I bought this tablet for my father, so that he would just include movies at home. In general, very often if you click a tablet, there are hangs, sometimes Google services, browsers, etc., just pops up not responding I tried to reset to the factory - the same effect. Android 7.0 |
Message#8 ![]() | |
a guest ![]() [offline] Group: Users Messages 2 Check in: 03.01.10 Acer liquid Reputation: ![]() ![]() | |
Message#9 ![]() | |
a guest ![]() [offline] Group: Users Messages 1 Check in: 03.01.13 Archos Arnova 10b G3 Reputation: ![]() ![]() | I stitched my Nomi C070012 Corsa 3 with firmware from the header, now the tablet stupidly does not turn on. It is erased, stitched but does not turn on for charging. 0.45 mA takes ... someone has a normal firmware for this piece of iron, thanks in advance |
Message#10 ![]() | |
Novice ![]() ![]() ![]() [offline] Group: Active users Messages 48 Check in: 02.06.15 Apple iPhone 4S Reputation: ![]() ![]() | Try to do wipe data / factory reset |
Message#11 ![]() | |
a guest ![]() [offline] Group: Users Messages 1 Check in: 23.06.15 phone NO.1 Reputation: ![]() ![]() | I also did not find a working firmware anywhere, I bought it from a friend from an official |
Message#12 ![]() | |
Experienced ![]() ![]() ![]() ![]() ![]() ![]() [offline] Group: Friendssavagemessiahzine.com Messages 646 Check in: 17.11.13 Oukitel U20 Plus Reputation: ![]() ![]() | Kapets, what a braking tablet !!! Tin easy! No optimization. Maybe some firmware will make a normal! -------------------- I am harsh, but fair. Sometimes rude, but I know the measure. |
Message#13 ![]() | |
Visitor ![]() ![]() [offline] Group: Active users Messages 26 Check in: 10.09.17 Samsung Galaxy S7 EDGE SM-G935F Reputation: ![]() ![]() | Reset Google account (FRP-lock) for this tablet: Required:FlashtoolFlash_tool ver. 5.1520 Drivers:DriverDriver_Auto_Installer_v5.1453.03 Start the flash unit, open the Format tab, select Manual Format Flash, prescribe: Region: EMMC_USER Begin Address [HEX]:0x50A0000 Format Lenght [HEX]:0x100000 Push buttonStartconnectofftablet to computer. We waitOKjust a couple of seconds, turn on and use) Used to reset the password forgotten by the client to enter, previously reset through the recovery to the factory settings. Post has been editedRoy111ster - 21.05.18, 17:04 -------------------- Do what you must And come what may. |
Message#14 ![]() | |
a guest ![]() [offline] Group: Users Messages 3 Check in: 04.10.13 Prestigio MultiPhone 4055 DUO Reputation: ![]() ![]() | Does anyone know how to make a root for the tablet Nomi C070030 Corsa3 LTE? there is no thread on the forum with this tablet and nothing is googling on the Internet Or is the tablet strongly new or useless to anyone (( |
Message#15 ![]() | |
a guest ![]() [offline] Group: Users Messages 1 Check in: 14.09.16 Reputation: ![]() ![]() | Hello! People formatted a flash, got a brick, you need firmware to raise this device. The firmware from the caps does not fit. Thanks in advance for your help. |
Message#16 ![]() | |
Experienced ![]() ![]() ![]() ![]() ![]() ![]() [offline] Group: Friendssavagemessiahzine.com Messages 475 Check in: 21.03.13 Reputation: ![]() ![]() | Does anyone have a firmware for a flash that in a post above I caught a glitch asks for a pin code; this code is not even in the reset slot, re-flashing does not help either. And after the reset and the firmware there is no menu for selecting the initial setting language right away this is a fucking pin window code Posted 06/06/2018 16:38: Wrote in support of the second day while Tishena |
Message#17 ![]() | |
User ![]() ![]() ![]() ![]() [offline] Group: Friendssavagemessiahzine.com Messages 54 Check in: 08.04.13 Reputation: ![]() ![]() | Does anyone have a firmware for a flash that in a post above I caught a glitch asks for a pin code; this code is not even in the reset slot, re-flashing does not help either. And after the reset and the firmware there is no menu for selecting the initial setting language right away this is a fucking pin window code Posted 06/06/2018 at 15:38: Wrote in support of the second day while Tishena [email protected], 09:47 ![]() Hello! People formatted a flash, got a brick, you need firmware to raise this device. The firmware from the caps does not fit. Thanks in advance for your help. Try my Rom-backuphttps: //drive.google.c...tD-dw/view? usp = sharing Instruction 1. Start the Sp Flash Tool and press the key combination Ctrl + Alt + V (Advanced Mode should appear in the window title) 2. Then we standardly flush our scatter file from the device and make sure that we have a tick on the preloader and that the preloader itself is physically present and loaded (there is a scatter and preloader in the unpacked archive). 3. Next, in the toolbar, click on the Window tab, put a tick on the write memory item and immediately get to a new tab. 4. In the File Patch field we need to specify the path to our created ROM file. To do this, click on the folder button to the right of the line and select our file. For all three Roma in the line below Begin Addres (HEX) set: 0x0 5. In the Region field, select the region corresponding to the name of the ROM file you selected in paragraph 4. 6. Next, click on the write memory button and connect the switched off device to the computer. The recording of the block will begin and a green circle will appear on completion. Disable yusb and repeat from point 4 for the remaining roms. If there are application errors - make wipe through standard recovery. on my own: the child’s tablet and backup were made hastily, managed to get out of the accounts, but didn’t delete the games. Because of this, the size of the rum file in the reaped state turned out to be 4GB and, accordingly, the firmware took about 40 minutes. The stock firmware was not changed (since there was no TVRP then) so put the rights from the TVRW and root root, change the launcher and delete all the garbage then the tablet will come to life and mistakes will be gone.IMEI will be changed to mine, but with the help of root rights you can restore it to yours. Post has been editedGxP.unknown - 22.06.18, 04:29 |
Message#18 ![]() | |
Experienced ![]() ![]() ![]() ![]() ![]() ![]() [offline] Group: Friendssavagemessiahzine.com Messages 475 Check in: 21.03.13 Reputation: ![]() ![]() | |
Message#19 ![]() | |||
a guest ![]() [offline] Group: Users Messages 1 Check in: 04.12.16 Reputation: ![]() ![]() | Who can help to revive this miracle of technology, after unsuccessful formatting, the preloader has disappeared, when connected to a computer, it is recognized as MediaTek Usb Port (port number), and not as a preloader. I never docked with this situation. I wanted to try through the check point, but I could not find where the necessary point was. Can someone tell me the thread or how the thread can be installed in a different way preloader? When trying to install via Flashlight, it gives error 4032. | ||
Message#20 ![]() | |
a guest ![]() [offline] Group: Users Messages 1 Check in: 18.03.14 HTC Desire HD Reputation: ![]() ![]() | Guys who will tell you where you can download drivers for sowing a piece of plastic !! (USB MTP device failure !!! (because of this I can not flash through the SP Flash Tool! (It seems like the firmware was successful, but when overloaded, the old screen saver is loaded and goes to overload constantly !!!Help me please!!! |
Message#21 ![]() | |
User ![]() ![]() ![]() ![]() [offline] Group: Friendssavagemessiahzine.com Messages 54 Check in: 08.04.13 Reputation: ![]() ![]() | Guys who will tell you where you can download drivers for sowing a piece of plastic !! (USB MTP device failure !!! (because of this I can not flash through the SP Flash Tool! (It seems like the firmware was successful, but when overloaded, the old screen saver is loaded and goes to overload constantly !!!Help me please!!! Try to install the program from the archive, then connect the phone. If the url of the site does not help in the archive, read the solution to your problem. You can also try to boot into safe mode and connect the phone to install the driver. Above there is a link to Rom-backup which will definitely raise a brick, if the firmware suddenly can not help. Attached files ![]() |
mobile version | Now: 05/19/19, 06:37 |