New patch OTnHappymaNn came out, the list of changes is not yet

RN5 Camera Patch module v1.004a (Custom 8.1) .zip(1.02 MB)

RN5 Camera Patch module v1.004a (Miui 10) .zip(1.03 MB)

RN5 Camera Patch module v1.004a (Pie 9.0) .zip(3.96 MB)


Post has been editedstydent_thebest - 07.10.18, 23:14

If you're talking about this patchThen he put out of TVRP

Information on patches of nHappymaNn

Changelog for all versions (from 0.994a to 1.004a):
+ Dual Pixel PDAF for all modes (30/60/120 / 240fps)
+ New stable focus for 60/120/240 fps
+ Middle exposure for 60fps
+ Calibration cad line in buildprop (Custom 8.1 / Pie 9.0)
+ HEVC for rear / front (Custom 8.1 / Pie 9.0)
+ More bitrate for video
+ One lib for front cam
+ Two files for secondary cam
+ Support 60fps in Snap cam
------------------------------------------------------
+ Dual Pixel PDAF for all modes (30/60/120/240 fps)
+ New stable focus for 60/120/240 fps
+ New average exposure to 60 fps
+ The string for a calibration cad buildprop (Custom 8.1 / Pie 9.0)
+ HEVC for the main / front (Custom 8.1 / Pie 9.0)
+ More bitrate for video
+ One library for the front camera
+ Two files for the secondary chamber
+ Support for 60fps in Snap cam

RN5 Camera Patch module v1.004a (Custom 8.1) .zip(1.02 MB)

RN5 Camera Patch module v1.004a (Miui 10) .zip(1.03 MB)

RN5 Camera Patch module v1.004a (Pie 9.0) .zip(3.96 MB)


Post has been editedstydent_thebest - 07.10.18, 23:53

segamal, Try this camera, I have it running on HDR + frontalke. Firmware Pixel Experience.


Post has been editednogojjm - 08.10.18, 00:16

Hello!
I have long wanted to write here, but postponed until all threads reading :)

So, a couple of months ago I bought a pH 5 with Global 9.5.13 OEIRUFA on board. I needed from a smart function of photographic images of events and card sharing these photos on the network. Since the budget was limited, I did not expect much from the camera. The last argument in favor of the choice of a smart camera has it, I'm straight to the boutiques otscholkal several shots with the shop assistant as a model and has chosen pH 5 for general feel of the gallery.

My IMHO is such: the camera is good here. Moreover, it is good and in stock and, moreover, when using additional. Soft It is accepted here by the drains, but in the truth to say, in addition to the aggressive noise, there are almost no complaints about it. At least, for me, the pH5 camera was a real revelation - beautiful colors, contrast, unexpectedly wide DD and cool portrait mode. In general, I was pleased. I didn't really steamed pictures, because For a long time I had already overcome this disease. Yes, and in case of serious photo gallery lies in the cabinet Canon 5DII with 50 / 1.2.


While I waited for unlocking the bootloader, I tried different external softiny. The main thing that allowed me to add. software, disable it shumodava, introduced me to the brave new world of pictures with a grainy texture that I like to get to the "adult" technique, of which I have now the Sigma DP2 and the already mentioned FF-SLR.
By meaningless tests on the leaves and brick walls it revealed that the highest quality zhpega give two softiny: Bacon Camera and Snap camera HDR. The first one was a little better, made it possible to really fine-tune Sharpe, but management seemed uncomfortable crash on setting the shutter speed and not give in to store RAW. I blew it.
A Snap camera was. And I still use it as the main camera.


The main charm of Snap camera is that it allows without any pereproshivok, unlocks, patches and rue give the absolute maximum quality, to which the sensor is capable of our Smart. The force HAL1 mode, you can activate the RAW format, and more ... every whim. It happens that the rabbis are filled with a uniform purple - helps tapnut on bayer pattern, even if it is listed in the singular, as in my case.
Rava derived from Snap cameras provide maximum detail, and very, very tyanuchi. In this sense, a sad look on rabbis to 5d2, which was originally much nicer to look at, but dvinesh slider farther permissible - and climbs out of the shadows gray stuff.
I manifest rabbis in Photoshop Express, and as a rule, if you do not play with the filters, the process takes less than a couple of minutes.
Plus, Rava pH5 give some sort of a "look", significantly different from the canon with his "trees should be natural brown."


So in the end I decided to unlock the bootloader, lost all the data gained Ruth and tvrp, and with them with Google camera and LLM mode in the camera Snap. Nice, of course, get a real HDR, and even with the incredible detail that provides gkam. But ... people hdrom better not to take a picture.


In conclusion, the pH 5 camera was much better than what I relied before buying. I wanted to buy Shirikov on DSLR - now just do not buy it. Phone is always with you, makes wonderful pictures, and you can handle them right after the shooting. Endless scope for creativity :)

Post has been editedmelox - 08.10.18, 06:31

No, Nhappymann patches are put through Magisk, and as I understand it is needed for TVP!

Yes, I swing the collection of patches by referenceYou choose which you need, restart the phone in the TVG, be sure to mount the System and Vendor sections, and only after that install the patch, then restart the phone.
How to check the patch fully started? We start the MOD modes, in the camera settings, select the master camera resolution (video) UHD 4K (30 fps), we switch the camera to video mode and if the record is working, the patch works correctly ... If you see, the camera cannot connect, it means that the patch does not work correctly! Then repeat the actions again.
P.S. Regarding the installation of both patches, Nhappymann and the patch which by reference! The sequence of actions should be this, install the patch from Nhappymann through the Magic, reboot the phone to the TWRP mode (it is the same recovery), be sure to mount the System and Vendor sections, and only after that install the patch, then restart the phone!
Why is this sequence of actions? As I understand the patch from Nhappymann, which through Magisk, after installation, lifts the lips from the patch on the link, which through the TWRP, and then back the black photos in the Advanced HDR + mode

Post has been editedstydent_thebest - 08.10.18, 09:07

I wrote several pages backward that the patch on the camera contains a file that after the firmware rubs the internal file .. and therefore the sound becomes g ... who do not like it, simply delete the Mixed_Paths.xml file from the archive and shake as always. Here is the last patch for a mium with a cut file
RN5 Camera Patch module v1.004a (Miui 10) .zip(1.03 MB)


Posted 10/08/2018 09:26 AM:

stydent_thebest, Through Chur Muorny Procedure ... I put a patch through Magisk, reboot in the TWRP, reboot to the system ... Everything! Everything works fine

chizhevskii.valentin, I used this version of Snap Cam:
Snap Camera HDR 8.8.0 (post alex0047 # 71199258)

Firmware stands stock, 9.5.13. I did not update, but as soon as I got the root, I cut / frozen the entire pre-installed trash.

As for Snap Cam settings, the exposer is default, Fixed focus. Focus Duration I put 0. This allows you to not refocus between photos, losing precious seconds.
Snap is mainly in Force Hal1 mode. Only for LLM translate it to the CAM2 API. There are two reasons for that:
1) In these two modes, different scarpe scales, while in CAM2 mode API, the minimum value of 0 gives soap shots, and 1 is already a pass. In Force Hal1 mode, I put the Sharpe on -1 or -2 without bleeding.
2) RAVA obtained in CAM2 mode API is some kind of silent gray guano, from which I never tried, I could not extract any decent.

The ISO setting and the exposal zone are displayed on the screen, there are sharpness, exposure, and activation of the CAM2 API. Sound button adjust the exposure.

In general, today again, I tried the drain of the STOR STOR ECG AI. and gam with different settings. Between the drain and Google, there is still a difference, but between the settings of the ship in Google Camera I did not see the difference not what. May you see a couple seems to me that the settings of the railway + low high or super high to one place. Stock with date and time.
[




Post has been editedNemo2009 - 08.10.18, 14:17

Tax, asked me an employee to update my RN5 4/64 to Miui 10, decided to do it clean and sew through Xiaomiflash. I downloaded the last at the moment v10.0.1.0.oeimifh (MIUI10), in Xiaomiflash put a tank near Clean All and began to sew. After that, the phone was configured and let me roll the programs you need. Next, it was necessary to install TWRP and GCAM, rut the phone it refused.
What will we need for this? Go!))))
Swingingadb, TWRP 3.2.3-0, no-verity-opt-encrypt-6.0, well, the patch itselfXrn5_camera_twrp_10.0.1.0_global.
TWRP 3.2.3-0 Rename in recovery.img and copy to the folder with ADB.
No-Verity-Opt-Encrypt-6.0 files, XRN5_CameRa_TWRP_10.0.1.0_Global throw in the phone's memory card, TWRP 3.2.3-0 is renamed in recovery.img and also copy to the memory card.
Now everything is in order:
We translate the phone to the FastBoot mode (power button + volume-) and connect to PC.
In ADB teamfastboot getvar anti Check the Anti-Rollback version, if it gives anti: 4 then all Hood and proceed on!
We enter the teamfastboot boot recovery.img Phone in the modes of the mod and allow the SYSTEM to modify if it is asked about the start of TWRP! Next, go on the phone in Mount ->Disable MTP ->Enable MTP, then on your phone boldly press Install ->INSTALL IMAGE ->We are looking for our recovery.img and put in the Recovery section.
Reboot your phone back to Recovery and install No-Verity-Opt-Encrypt-6.0, after that rebooting in Recovery by mounting the System Vendor sections and install the XRN5_Camera_TWRP_10.0.1.0_Global patch.
Installed? Now load the phone and install Google Camera, my choice fell on the mod from Al_ro 5.2.022 version 07.3.
After installing the GKAM, go to the phone settings --->All applications --->We find our gkos and tapam on it>Open other permissions and exhibit: System Settings - Allow,
Wi-Fi status - asking, desktop shortcuts - Allow, lock screen - Allow, launch in background - ban.
After that, you can run the Ham yourself, run, give access and go to the camera settings, set the master camera resolution (video) UHD 4K (30 FPS) and go to video mode if the entry does not work with you everything happened! If you write no access to the camera then you need to restart the phone in Recovery by mounting the System Vendor sections and re-install the XRN5_Camera_TWRP_10.0.1.0_Global patch.

P.S. Already the second RN5 with a fully working chamber, without black photos in Advanced HDR + mode
P.P.S may be useful

Post has been editedstydent_thebest - 08.10.18, 15:18

Can with the XRN5_Camera_TWRP_10.0.1.0_twrp_10.0.1.0_twrp_10.0.1.0_twrp_10.0.1.0_global
But if you do everything and the same with patches (with modules for TWRP) from Nhappymann, for example 0.940A or 1.004a - 4K KG (30 FPS) there is but not start ... as soon as I did not install - and mounted, and cleaned. The fact that in the stock of the buns are installed and AI and manual mode

Post has been editedbadren - 08.10.18, 15:25

Version 10.2
P.S. Version 07.2 I like more, the color is more natural

2 photos
5.2.025 Version 10.0

5.2.022 Version 07.2


With dark lighting, the difference is generally huge, 5.2.025 Version 10.0 goes into pink shades

Post has been editedstydent_thebest - 08.10.18, 17:58

Stock

Gkk

Patch from the headquarters archive!
P.S. The lighting in the apartment is not bright, everything works and without a black photo!

I share what happened. Before resolving the issue, everything was installed as everyone knows, I'm talking about patch - cleaning, mounting, TWRP, etc.
I have 10 8.9.20 global, daily. Paul a day did not work on the portrait on the GKAM (Malevich), and the video was not launched in the GKAM.
Was found:
GCAM-5.1.018-Pixel2MOD-ARNOVA8G2-V8.3BFIX and RN5 + Camera + Patch + Module + V0.940A + (MIUI + 10) (Machika Module).
Just that, from Masik, moved to TWRP - and in a stupid again (at which time) mounted systems and vendor, reboot into the system.
And Wu-a la Earned the video in the GKAM 4K (I do not need it) but the fact, and the portrait mode in the GKAM (even if very dark).
I draw a conclusion, the algorithm is not clear, but so-like all the Shalko Valko, with mods and patches ... - Just experiment, and perhaps you will also earn.
All who helped, and even more so did not help - of course "minus" ... then it seems to be in fashion.
All good pictures and video
P.S. I still have - BusyBox Pro V67 Rus. To be honest, I don't know why he ... as in that anecdote - everyone puts, and I set ...
PS-2 remembered - BUSYBOX PRO is needed for Viper4, the sound set to remark

Post has been editedbadren - 08.10.18, 23:31

Installed with POM. Magisk

Rebooted into the TWRP, then into the system.

Installed MGC_5.2.025_WHYRED_AL_10.0.APK from the header, according to the instructions from the header. Launched, did not climb anywhere in the settings.
The main chamber takes off, everything seems to be ok. The front line in HDR + mode does not create a photo, only "shoe" is frightened. In the Advanced HDR + mode + stable black rectangle.

Miipro 8.9.20

What am I doing wrong??

Post has been editedNeuromantic - 08.10.18, 20:10

aasman all perfectly

Posted on 10/08/2018, 20:24:

Neuromantic, I had so, I came out and unloaded from the system, then earned. But I still do not use it ..

What does the AUTO Exposure settings in the ARNOVA chamber correspond to the AUTO Exposure settings?

Nemo2009 ,

It seems to me that or after installing the patch of the camera, the flow has bent and Arnov and the AL RO in detail :) ?? Interesting :). Stock with date.



Post has been editedNemo2009 - 09.10.18, 13:03

Some photos in cloudy weather, it is pressed all on googcamera-pixel3mod-arnova8g2-v1, miniso and maximum quality settings. On the 4K monitor in HDR mode, it looks just great. I am very pleased with the quality photo :)


P.S. Comparison of photos on Googkamera-Pixel3Mod-Arnova8G2-V1 and 5.2.022 GKKOV 07.2 Version 07.2
The first photo of Arnov, the second al_ro

what do you think?