Keenetic Omni (KN-1410) - Discussion | [Wifirouter]



Rep: (1230)
Keenetic Omni (KN-1410)- Discussion
Attached Image

Information
Description
  • Product Name: Omni
  • Part Number: KN-1410-01RU
  • NDM HW ID: KN-1410
  • Any Internet tariffs up to 100 Mbps, MultiWAN, IPTV and Smart TV
  • Wi-Fi with receive amplifiers and high-precision 5 dBi printed antennas
  • USB port for 3G / 4G / LTE / DSL modems, disks, printer or DECT station
  • File server, DLNA, Time Machine, standalone torrent client Transmission
  • Yandex.DNS and SkyDNS: protection against cyber threats and parental control
  • Configure and manage your home network via mobileattachment

A photo
Specifications
Main characteristics

The model index is KN-1410
The processor - MediaTek MT7628N (MIPS24Kc) @ 575MHz
RAM - Winbond W971GG6SB-25 128 MB (DDR2)
Flash-memory - Winbond W25Q256JVFQ 32 MB (Dual Boot, SPI)
Wi-Fi 2.4 - Yes
Class Wi-Fi - MediaTek MT7603 2T2R / 300Mbps (2.4GHz)
Antennas - 2x 5dBi (FEM Infineon BF776 (eLNA))
Ports - 5x FE (10/100)

Wi-Fi / WPS button ✔
FN button - Yes
USB Ports - USB 2.0
3G / 4G connectivity - Via compatible USB modem
Connect via DSL ADSL2 + / VDSL2 viaKeenetic Plus DSL
Telephony support -C Keenetic Plus DECT
Support module for Wi-Fi ✔

Performance

2.4 GHz Wi-Fi network speed 300 Mbps
IPoE / PPPoE Routing Up to 95 Mbps
L2TP / PPTP Routing Up to 95 Mbps
Read from USB disk Up to 12 MB / s

Functions and protocols

IPoE ✔
PPPoE ✔
PPTP ✔
L2TP ✔
802.1x
CABiNET ✔
Multiple PPP Tunnels ✔
PAP / CHAP / MS-CHAP / MS-CHAP v2 ✔
MPPE (Auto / 40/56/128)
VLAN IEEE 802.1Q ✔
Route Table (DHCP / Manual) ✔
Link Duo ✔
IntelliQoS ✔
DHCP (client / server) ✔
IPv6 Dual Stack ✔
NAT ✔
Igmp ✔
UPnP
Manual port forwarding ✔
PPTP / L2TP Transit ✔
SPI DoS Attack Firewall ✔
Ping checker ✔

Wi-Fi wireless network

Seamless roaming 802.11 k / r / v ✔
Pre-configured protection Wi-Fi ✔
WEP, WPA-PSK ✔
WPA2-PSK, WPA2-Enterprise ✔
WPA3-PSK, WPA3-Enterprise, OWE ✔
Multi-SSID and guest network ✔
MAC access control ✔
Wi-Fi Multimedia (WMM)

Applications

Mobile application for Android and iOS ✔
Transmission torrent client ✔
File server ✔
DLNA server ✔
UDP to HTTP proxy ✔
FTP server ✔
Print server ✔
IPSec VPN Client / Server ✔
PPTP VPN server 10 tunnels
Internet filter Yandex.DNS ✔
Parental control SkyDNS ✔
Dynamic DNS client ✔

Physical characteristics and environmental conditions

Dimensions without antenna, W x D x H 159mm x 110mm x 29mm
Mass device 200g
Operating temperature range 0-40 ° С
Humidity of the ambient air when working 20% ​​- 95% (no condensation)
Power supply voltage 100–240 V 50/60 Hz

Diagnostics and control

Web configurator in Russian ✔
Command Line (CLI) by TELNET
The ability to control from the external network ✔
Backup and restore configuration ✔
Software update features ✔
Logging system events ✔

Equipment

Device
Power adapter ✔
Ethernet cable ✔
Instructions for use ✔
Documentation
Reviews, links
Useful information
Problem solving, setup
NDMS V2 + Entware
Keenopt setup
OpenVPN setup
[Entware] Raise OpenVPN server
[Entware] Openvpn client on the router
Enable 802.11n standard on NDMSv2 firmware (via CLI TELNET)
Forced assignment of N mode (compatibility N) for Wi-Fi via CLI from enpa
Wordpress on Entware
How to print from phone to printer via Android OS
Antenna Comfast CF-ANT2410DA for a place native to Keenetic II, Giga II
Flash modem in HiLink for maximum speed
CAT5 HiLink Speed ​​Test
All about IP Cloud (KeenDNS)
"White" IP from Rostelecom using Entware
Wake on Lan (WOL) function in ZyXEL Keenetic routers
A bit of theory on the mechanism of updating NDMSv2 firmware from _Danila_Master_
Yandex disk / WebDAV in ZyXEL Keenetic
Wi-Fi signal attenuation coefficients when passing through various environments
How to change the network name of the smartphone in Android?
EaseUS Partition Master Free is a handy program for partitioning a hard disk into partitions (suitable for creating a partition in ext3, creating two ntfs & ext3 partitions).
What type of file system and paging file is best to use? Enpa description
What type of file system and paging file is best to use? Option from miltt
Correction of the Transmission operation without reinstalling the router firmware from enpa
How to determine the type of antenna connector (SMA / RP-SMA)?
NTP SERVERS - time servers
Using the zram paging file (LZO) for the swap location from enpa
Creating an ISP (Internet Service Provider) interface via CLI (command line) from enpa
Lock site by name on the firmware from dezhik
If you need port 5 to distribute the Internet to devices on the wire from enpa
Speed ​​limit via CLI (command line) from enpa
PuTTY is a client program for working with network protocols SSH, Telnet, SCP, SFTP, for connecting via a COM port and ZModem, a utility for generating RSA and DSA digital SSH keys.
Solving the problem with ping in games specifically WOT for Wi-Fi from freealbert
WPS on a router - what it is and how to use it
Setting up a connection to a working VPN server using a "gray IP" at the provider from YEDkii
Forced assignment of speed on the port of the router through the CLI from enpa
Resetting factory settings (factory-reset) via CLI from enpa
2 ways to change the MAC address of a computer network card
Zyxel Keenetic Giga III + Zyxel Keenetic Plus DECT - Internet and telephony in the office from WOOF11
The impact of USB 3.0 devices on the quality of data transmission over the air
ÎœTorrent client setup
Zyxel GIGA III router: setting up simultaneous work with several Internet channels from Sergei Golubitskiy (youtube video instruction)
Extending your home Wi-Fi network with Dalex-NEMAN ZyXEL PLA4201v2 EE powerline adapters
We fix the display of interfaces in the Connections section of enpa
Installing Keenetic Giga III in a private house from olezel
Setting up remote access Transmission from enpa
Setting up and installing minidlna (1.1.6 + git-8a996b-1) opag-package from enpa
Configuring and installing the syslog-ng opkg-package for recording logs to external media from enpa
Firmware update using enpa CLI TELNET command line
Turning off the LEDs of the router using the CLA TELNET command line from enpa
Disabling the FN button LED using the enpa CLI TELNET command line
When adding a torrent, you can choose which files to download?
Solving display problems \ login by domain name (hostname) of Keenetic router in Windows 10 from enpa
Using the WAN port as a LAN port in Keenetic Giga III \ Ultra II using the enpa CLI TELNET command line
Changing a Wi-Fi wireless channel in Keenetic using the enpa CLI TELNET command line
Configure automatic reboot using CLI TELNET by _Danila_Master_
Comments on the work of the Padavana TX Burst
Four Stream - Does the KN-1010 HT processor software support? Information from balian007
Installing and configuring Transmission 2.93 from Opkg Entware-3x for Keenetic Giga KN-1010 from enpa
Turn on seamless Wi-Fi roaming and block Internet advertising on Keenetic routers from hwp.ru
TTL lock
Keenetic Recovery
Internet speed testing
http://www.speedtest.net/ru/
https://www.nperf.com/ru/
https://2ip.ru/speed/

Attention! Testing servers are provided by external providers and the results of such tests depend on many technical factors.

Test results from these services can only be used for diagnostic purposes.
Instructions

Internet connection setup:

Install and configure KeeneticOS:

Reset:

Diagnostics:

Recovery firmware:

Reservation

Speed ​​Limit:

Remote access:

VLAN:

Forwarding and port configuration:

Wi-Fi setup:

WPS (Wi-Fi Protected Setup):

Security and DNS:

schedule :

Tunnels: PPTP, L2TP \ IPSec, IPSec, SSTP, OpenVPN, Wireguard, VPN-server:

File server and USB-drives:

FTP server:

BitTorrent Transmission Client:

DLNA:

Digital television:

USB printer:

CLI (command line), SSH:

Modes:

3G / 4G modems:

Digital telephony:

OPKG packages:

IntelliQoS:
Application to manage the router
Firmware


The official version of KeeneticOS
KeeneticOS out of the box

2.11

2.12

2.13

2.14

2.15

3.01

3.03

3.04

3.05
Debug version of KeeneticOS
Debug - test (draft) release of the operating system. Repeats the functionality that is in the officially released versions of "Release" or "Beta", but also contains additional fixes and new features. The debug version is under development and may contain bugs.

  • Testing debug versions of KeeneticOS is carried out on the forum Keenetic -here.
  • Changelog of debug versions of KeeneticOS -here.
Program for firmware recovery
KeeneticOS firmware catalog

The curator of the topic is enpa


Post has been editedenpa - 25.11.20, 22:01
Reason for editing: Stable version Keeneticos 3.05.c.4.0-1 of 25.11.2020 for KN-1410



Rep: (0)
Hello!
I bought this router and YOTA USB modem.
Checking the speed encountered the following.
On a computer, the speed is 7-16 Mbit
On phones on Android no more than 1, but as it spotted 4 mbps.
Called in YOTA told to contact those. ZyXEL support, we can’t cut the speed over Wi-Fi.
And actually the questions, is this a router? If so, what to do about it.
If you connect it to a normal network over the LAN, the problem remains?
Before that, SkyLink went away because of the eternal dump of the network, there was some kind of Chinese router with it that had no Wi-Fi problems.
Thank you in advance.

Attached images
Attached Image
Attached Image



Rep: (6)
* Mrrock,

Keenetic Omni c Huawei E3372 Velcom Belarus
Speedtest test on Nokia 6.1 Plus (Android) wi-fi connection with Keenetic Omni.

Attached Image



Rep: (0)
It turns out in fact, that I have with W-Fi on it.
Although in the settings now looked speed up to the phone shows 65 MB / s.

Attached images
Attached Image



Rep: (300)
Tell me how to get rid of this error?
Error: Read-only file system (/ tmp / mnt / AgeStar / download / Desktop Wallpapers (4K) Ultra HD Part (181) / 001_Desktop Wallpapers 4K Ultra HD (3)

The latest firmware is 2.13.C.0.0-3. Yesterday I connected the router and updated yesterday. Folder permissions - read and write. Download management tried in different ways and through the application and through the web and through gui. I read here and on the Internet. Maybe I missed something. XP axis.



Rep: (300)
Found why the error.
In the Transmission settings, I specified the hdd root for the download, and I just need a folder. Created, indicated, the download went.



Rep: (1230)
Stable firmware version2.14.C.0.0-0 from 12/03/2018for KN-1410

Component kit
base
easyconfig
storage
config-ap
corewireless
ntfs
ppp
config-client
fat
pppoe
usb
ydns
config-repeater
hfsplus
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
usbdsl
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
usbmodem
pingcheck
usbnet
usblte
trafficcontrol
cifs
ddns
safedns
dlna
nathelper-ftp
transmission
ftp
madwimax
nathelper-pptp
nathelper-rtsp
usbserial
nathelper-sip
nathelper-h323
components

Changes
2.14.C.0.0-0

New features and other improvements:

• Added support for USB modems Alcatel IK40V; Huawei E5776; TELE2 ZTE MF920V MiFi
• Added the ability to simultaneously use WAN connections in balance mode
• KeenDNS: Added option "cloud access over IPv6" (does not require IPv6 on the device)
• Wi-Fi: added setting of the region option "Kazakhstan" for 5 GHz
• Wi-Fi: improvements in roaming
• Web interface: added Host Traffic Monitor
• Web-interface: integrated context help
• Web-interface: added the function of printing a QR-code to connect to a Wi-Fi network
• Web-interface: fixed bugs
• Transmission torrent client: updated to version 2.94
• Updated OpenSSL library
• VPN: increased number of tunnels
• Kabinet: added ability to set the server port

New features of Keenetic Plus DECT:

• Added auto dial function
• Added setting for early voice call encryption
• Added support for Panasonic KX-TGA806, Panasonic KX-TGA810, Panasonic KX-TGA550, Yealink W52P handsets
• Fixed the problem of replacing the outgoing call number when selecting a line through #
• Fixed export of calls to CSV

(c)https://help.keenetic.com/

Installation process and debug mode
1. Download firmware version 2.14.C.0.0-0
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.14.C.0.0-0 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disableshttps://help.keenetic.com/.
6. We send debug self-test fileofficial technical support.

Attached fileKN-1410_stable_2.14.C.0.0-0.zip(9.17 MB)

Mirror:
cloud.mail - v2.04-v2.14 Firmware Keenetic
yandex.disk - v2.04-v2.14 Firmware Keenetic
Picture



Rep: (0)
KN-1410_stable_2.14.C.0.0-0.zip

After installation, DLNA fell off. TV and receiver stopped seeing media files with hdd.
Reverting to the previous 2.13.C.0.0-0 solved the problem.

Can someone come in handy



Rep: (300)
I passed the auto update. At this time, I watched the video on TV through dlna and there was a download on the torrent.
It did not cause any problems, I did not reset. The only thing I did not understand at the beginning was why the network was lost (now the auto was turned off).

A question to the knowledgeable, is it possible and how can I edit the dlna files so that only the folders I need are displayed on the TV, and not all?
The settings indicate the video folder, but all others are visible (music, photo). I read a little forum kinetics, nothing was needed.
If there is, stick a nose.



Rep: (0)
Good time day! I apologize, maybe this stupid question is already somewhere on the pages of the discussion (I tried to look for and did not find anything), even if I don't ask for this model, but still ask: please tell me whether you can ask our favorite piece of "master password" So that it does not disappear when discharged into the factory settings? I'll tell you why. A friend in the hostel almost took the router, bought this model in my advice. As they say cheap and angry. Must with how-thread from theft is difficult. Although though b somehow to harm if they walked. Through keendns and admin
Thank you for your reply

Post has been editedsmiths - 14.12.18, 13:50
Reason for editing: clarification



Rep: (2)
smiths probably nothing can be done in this sense, you can always reflash or reset the settings. You can put a router in the closet under the lock or buy a small one, such as nexx wt3020 and take it with you so that it will not be stolen.



Rep: (1230)
* smiths There is no master password support in Keenetic OS. You set your admin password.



Rep: (6)
I can’t add Yandex.DNS via web-muzzle:

Components :: Manager: component "ydns" is queued for installation.
Dec 21 15:51:55
ndm
Components :: Manager: update task started.
Dec 21 15:51:56
ndm
Core :: Ndss: [9546] cannot connect to the server.
Dec 21 15:51:56
ndm
Components :: Manager: request failed (303).


Internet is available and all pages open. Cant firmware or am I doing something wrong?

Keenetic OS version 2.14.C.0.0-0

Post has been editednkipia - 21.12.18, 16:34



Rep: (-1)
But can it be flashed with some other firmware for this chip and then restore the factory one?
how much is it confused (right from the web interface you can?)



Rep: (2)
nkipia, IsWin, , if you have some kind of glitch and reset to the factory settings or firmware of the older firmware via the router’s web interface does not help (I, for example, didn’t want to display the item with additional software components), then the firmware upgrade helped me, using a special utility, this instructions


Post has been editedkavboy84 - 23.12.18, 12:24



Rep: (6)
* kavboy84,
This method only helped to roll back to version 2.10.C.2.0-6 ... and now I have lost the traffic monitor.

Keenetic Omni sees updates
Attached Image

but the update attempt ends with this
Attached Image

My.Keenetic is also not happy
Attached Image

Log updates
Dec 26 09: 19: 19ndmComponents :: Manager: update task started.

Dec 26 09: 19: 20ndmCore :: Ndss: [2442] HTTP error: 307 (Temporary Redirect).

Dec 26 09: 19: 20ndmComponents :: Manager: request failed (307).


UPD. Understood.

My operator's jamb
Attached Image

This bad guy blocked traffic to the update server. I plugged the modem of another operator and everything was updated without problems.

Post has been editednkipia - 26.12.18, 09:36
Reason for editing: It was decided.



Rep: (0)
Tell me pliz who knows or send :) where you can find. I can not find in Google.
Does the question of Keennenic Omni 1410 forwards traffic between interfaces? If so, how can it be enabled, well, at least the option that is responsible for it.
Here is my example. C Keennenic Omni 1410 connected to the working VPN server (Keennenic II) I want to access the lacqual network for Keennenic Omni 1410. Routing to Keennenic II set up. Firewall on the KeenNenic Omni 1410 on the VPN interface, everything was allowed, and traffic on the IP address of the client VPN connections raised with Keennenic Omni 1410 does not go. Does not want to be broadcast to the local OMNI network. You are confident in the server setting, because other tunnels work successfully, and this does not want from Omni 1410: ((. Have special tricks in the KeenNenic Omni 1410 setting?



Rep: (0)
I will answer myself))
Keennenic Omni 1410 subya around normally forwards traffic between networks. Routing between networks works on it. I solved my task. My mistake was that on the final device for the Keennenic Omni 1410 the Bredmauer blocked all incoming. He without a tambourine did not want to work with the added rules for permissions. Until the end, I did not understand who I drove more or the wall-wall :) As a result, I made him, for how long :)



Rep: (1230)
Stable firmware version2.14.C.0.0-4 from 12/26/2018for KN-1410

Component kit
base
easyconfig
storage
config-ap
corewireless
ntfs
ppp
config-client
fat
pppoe
usb
ydns
config-repeater
hfsplus
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
usbdsl
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
usbmodem
pingcheck
usbnet
usblte
trafficcontrol
cifs
ddns
safedns
dlna
nathelper-ftp
transmission
ftp
madwimax
nathelper-pptp
nathelper-rtsp
usbserial
nathelper-sip
nathelper-h323
components

Changes
2.14.C.0.0-4

Corrections:

Fixed renewal of SSL certificates

(c)https://help.keenetic.com/

Installation process and debug mode
1. Download firmware version 2.14.C.0.0-4
2. Installby file upload.
3. Dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.14.C.0.0-4 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disabledebug mode.
6. We send debug self-test fileofficial technical support.

Attached fileKN-1410_stable_2.14.C.0.0-4.zip(9.18 MB)

Mirror:
cloud.mail - v2.04-v2.14 Firmware Keenetic
yandex.disk - v2.04-v2.14 Firmware Keenetic
Picture



Rep: (12)
Hello!

What certificates do I need to connect to the Wifi network? My old phone does not want to connect to the network, it seems "An authentication error has occurred."



Rep: (300)
* Isolated_Warrior,
Maybe you should look at which of your start-ups your phone is friends with, and what's in the settings of the router, which channel is selected and which network standard (b, g, n)


Full version    

Help     rules

Now: 12.01.21, 20:21