#### V0.9 #### - Global Optimized GPS - Fixed backup and restore files if not raised like MM;
- remotely added: crDroidMusic, Etar (CrCalendar), ViaBrowser and PhotoTable, Abstruct, Launcher3QuickStep, TrebuchetQuickStep, ParanoidQuickStep, WallpaperPickerGoogleRelease, Aegis, GalleryPrebuilt, Lawnfeed, Phonograph, MatLog, VinylMusicPlayer;
- In the Cutout Increase Icons added four options icons amount (created additional overlay, just after flashing to choose in "Screen Cut" this overlay.): 4, 5, 6 and 7 - it increases the chance of his work (although Corvus is It does not apply) - as it is removed from the DUBUGMODE because of their more frequent operations (Corvus-OS are not affected);
- Added patch GPay Power Menu (aka menu alternative shutdown is from the bottom, as well as if you have more than two cards - easy access to them) - only as MM (if installation via MMS, immediately activated the menu, but if through TWRP like MM - one minute (as well and is removed by simply remove the module));
- Added patch Unlimited Storage Google Photos - who knows what he needs, he knows - like MM not;
- Added defrost all frozen applications (if you freeze something through TB ​​/ mn then bootloop.);
- Removed the item settings of the patch on the camera out of this patch - well delusions as initially;
- Fullscreen Gestures has been updated to v6.6;
- The Fullscreen Gestures I replaced overlay for Android 10 on your own - this was done because the method in this patch becomes not work on some firmware;
- The Pills Overlay been completely rebuilt all the overlays as well as added new: Point, and 3px 4px to the previously available width (screenshots in the spoiler works) - because of this items have changed places, and added many new ones. I also suffered the removal of modules in the bottom (because of this module is to delete the set, even if nothing has been selected);
- Added patch RoundedUI - makes rounds in the entire system, the values: 0, 5, 10, 15, 20, 25, 30;
- All items have been reversed, as all items were distributed by major category - will be improved;
- Most of the code has been exposed knife, a lot of code has been written, "Aby worked" quietly provided in normal view - as multiple selections have been redone in a universalschinu universalschine;
- From the Reset Screen Lock removed ext. the confirmation;
- Added two urgent and universal patch SafetyNet;
- In GPay and SafetyNet is activated forcibly MMHide (if the MM, and if TWRP then through shshnik at startup);
- Fixed MAGISK_CHECKER - DEBUGMODE when he offered a choice, but most do not have MAGISK in the system;
- Systemless OPLauncher has been upgraded to 2.4;
- Media Volume Steps Patch renamed Volume Steps Patch, it was added a step (10), in the same row on the trip to the high volume of notifications (if it is / was) and added line on the system volume, voice call, the volume of the alarm - with a variation of editing separately or together;
- It turns out that with the action of the patch Fingerprint Action App Switch not only switches between two applications, but also by holding the scanner it will make Splitscreen and hold again it will return the application in the usual form. Just Power Fingerprint was renamed Fingerprint Actions (as it has long had a 11 + 6 elections), and the action Action App Switch to the Patch App Switch / Recent / Split Screen.
- Also in the Fingerprint Actions have been added to these steps: Start the Calendar, Phone Launch, Launch Contacts, the calculator, End call, Start / enable / disable music / end a call, Launch Gmail / Mail;
- Updated lawnchair to 2621 (by fashion fordownloads) and rebuilt overlay - subparagraph renamed Lawnchair Plus - as it was to reduce the patch + classy events;
- The removal of fixed SystemlessLauncher launcher as modules if any of them were selected after entering the item;
- Added TTL Fix, aka nfqttl v2 - only as MM - Appears only if there is support for TTL or NFQUEUE;
- Added Single User Mod - removes user point settings and disables guests and other users;
- Some modules are activated immediately if you have installed via the MM, such as GPay Power Menu;
- Added Google DNS - only as MM;
- Improvements Build.prop fashion;
- In many modules to add a description. Just their versions have been modified;
- Files "Patch Mode" have been removed, they now replaces "PATCHMODE" file, which will be registered "patch mode" and its design (the elections in the old design in the same line as the new);
- Added patch Systemless TZData - both MM and not - for updates on non-updatable firmware tzdata in ancient and not only;
- Added patch GPU Rendering for Android 10+ - like MM not - unless there is a switch in the settings for the developer. Switches forcibly setting the rendering: OpenGL (Default), OpenGL Skia (more faster than OpenGL), OpenGL Skia Vulkan (the fastest option but with possible artifacts);
- Stereo by Kommandoz updated to v12;
- Now against the "Yes" will be a symbol (\) - which means that at this point it is possible to exit the sub;
- LP-hosts has been updated to 8.8.6 - numbers only;
- Patch TMPDIR replaced with / dev / tmp / to / data / local / tmp / - in connection with some modifications;
- Added patch MagiskHide Props Config v5.2.7;
- Removed items in the elections Dipper and Whyred - firmware logo.img and splash.img;
- Removed item in Whyred GPS Fix - obsolete;
- Added items in elections Dipper and Whyred - setting Pulse Audio Mod 3.4 - just like Magisk module;
- Added modular unpack - unpacks only what will be used at this time (reduces the overall time unpacking twice from the original if sewn through the MM, and half the time in TWRP);
- unzip now used from a BB in the patch - because of the peculiarities of some firmware / TWRP which unzip does not work properly;
- BusyBox updated to v1.33.0.1;
- From GBoard Themes was removed one moldboard theme, it was also rebuilt files with themes;
- Since there is a patch for a long time all the files from the patch zipsigner are needed to QS, to which I made along with the installation aapt in the bin - MM and TWRP - as these files will soon be more useful;
- Added patch Cache Cleaner - micro analogue CdMaid through the terminal - removes all empty folders in the / sdcard and subfolders, as well as some unnecessary temporary folder cache, and so on - will improve.
- Removed item Display Cutout No Cutout - outdated / not needed at normal firmware;
- Fixed installation QuickSwitch;
- SystemlessHosts updated to v200717-v12.0;
- SystemlessLauncher OneUIHome and Pixel updated to v2.1 and also v1.3 ShadyLauncher up and OP to v3.0 - as other improvements on the launcher;
- Added a choice to install the patch presets for ViperFX or not (initially staged gun);
- Multiple other improvements to the modules and other files as well as a lot of things that I had forgotten the past month;
- Due to lack of time / desire as well as work - in this version of the patch, I did not much like that - so it might after version 1.0+ something will be more classy (and maybe will not);
#### V0.8 #### - Added a checker on GApps;
- Universal GMS Doze does not appear on the firmware without GApps (logical);
- From DDVFE it was deleted by Busybox, which will now be copied from the patch and after reassemble (weight optimization patch);
- Just out DDVFE x86 folder was deleted - I do not support in his patch "IS";
- If you do not arm architecture or arm64 - it will be displayed a message that it is not supported;
- Fixed character to unmount - could cause problems when unmounting, but I did not notice them;
- Some other improvements and code cleanup;
- Viper-FX Fix v1.0 & v2.0 will not appear on Miui (where such problems were observed that had these fixes were needed);
- GPSFix for Whyred is now shown only in DebugMode (because it is out of date);
- I am aware of the problem: "linker: Warning: could not read" and "WARNING: linker: Warning: could not read" on some devices (at RN5 so exactly available) - these errors do not affect the operation of the patch, just do not convenient to watch logs (these errors are only in TWRP);
- This version of the patch was with some fixed / improvements, etc. .. In version 0.9 I plan to add about 10+ points and 20+ elections and much of the rest, and version 1.0 will be the final (version 1.1+ will be, but not soon as 0.9) and does not have great changes and fixes (mostly fixes, because so fast I release 0.8 that would be less bugs and take rasslabone of 0.9).
#### V0.7 #### - Display Cutout No Cutout, and Cutout Increase Number Not Icons are no longer shown on Miui (logical);
- Returned UniversalGMSDoze only for MM - because they do not work on the MM version 0, and there is nothing we can do about it;
- In UniversalGMSDoze returned / added opt.sh with a choice to install it;
- Added UniversalGMSDoze v1.7.7 (BETA) - the choice is made between versions STABLE v1.7.6;
- Added Systemless ShadyLauncher v1.2 in the corresponding item;
- General other improvements Systemless Launcher'am, Movement of overlays and QuickSwitch;
- Updated stereo modes on Kommandoz to v11;
- Returned show stereo mods 10-ke (I cleaned it-because the microphone is not working, but it depends on the firmware version);
- In stereo mode it will now be written by the author of a bet, rather than what has been;
- Removed one stereo modes from Dipper choice;
- Fixed FIND Miui before pervonachalkoy in TWRP;
- In all the (hopefully) put ui_pirn'tax release patches and other improvements;
- Changed FIND MM, now he findid its first installation (it will be used for the appearance / absence of certain items / patches that will be in the "original" archive);
- So carried away that he forgot about DDVFE that I simply did not return after some manipulation;
- Added fix butlupa at 900+ DPI for Miui (who is experienced, he knows why he was) - only for MM from under TWRP (after running it will self-destruct);
- BB has been updated to v1.32.1.2 - only numbers;
- LP Hosts has been updated to v8.7.9 (1639) - only numbers;
- The Build Prop Tweaks were removed some lines because some of firmware they have worked in the opposite direction;
- remotely been added to the application: Papers (on EvoX is supposedly the wallpaper (it would be better they were not there ...)), CarrierServices, CameraGo, RetroMusicPlayer;
- Hide Pills Overlay (FullScreenGestures) updated to v6.5;
- Raising the version of the patch from the changes that were in previous versions of this patch (that was not the most important);
- Fix "a null object reference" after the BB install TWRP through both MM - this is due to "feature" firmware and at the same time by MM (almost complete random) - was little changed from the installation method under the TWRP like MM;
- Transfer zipsigner and zipsigner-3.0-dexed.jar of QuickSwitch in the Addon. Just added zipalign and zip in batch file Addon - from under them once will be magic;
- Added search for and delete the BusyBox (in the same paragraph as the setting) - both from this patch and just system, with its full symlinks (can no longer be put on top of the BB / close if he is already in the system (TWRP));
- Added wallpaper removal (Fix Softloop (who is experienced, he knows what he is)) - appears only in TWRP and if you are wallpapers;
- Reset Screen Lock yet now shown only in TWRP;
- Removed the choice of how to put in the TWRP: MM or not - it can include creating DEBUGMODE file without an extension in the / sdcard - his, in turn, I will use for testing and others. The same will be saved logs from TWRP to / sdcard / logs;
- Fixed typos found in the patches and modules;
- Added battery test (how many charge cycles, how much wear and so on) - is working as it is, it appears only on newer devices where there are files from which you can take Old. Also in the calculation of how much mAh the two values ​​- one of them is correct (done because two different devices at the design infa written differently) - will probably improve with the calculation of interest on the project and other details;
- Display Cutout No Cutout, and Cutout Increase Number Not Icons were transferred to DebugMode - of a rare work on different firmwares;
- And many other minor changes / improvements checker / AC and other things.
#### V0.6 #### - In this version of the patch, I tried many things to fix but add a lot of new;
- When you delete instead of $ MSGSD Found ($ FINDTRASH) In $ NAMEPATHDELLTRASH was $ MSGSD Found ($ FINDTRASH) - that would not TWRP spam spam;
- Just in time remove a bit reworked ui_print and at the very end put to sleep 3 (if you removed it takes just to the bottom proskipali but skipnuli another selection);
- Removed file keycheck, because the old method with him I deleted still in the 0.1 - hopefully forever;
- The files LEDLight Animation optimized code (a very important change (no));
- Fixed a ReMount after flashing DDVFE and CPFMD;
- Added setting UniversalGMSDoze (without Watch and elections on Android version) v1.7.6 As MM, and not - with the ability to delete if there was not set as MM;
- Added setup App Systemizer (Terminal Emulator) v17.3.1 - only as MM;
- Because of the GPU to update the driver in many normal firmware and this in Build Prop fashion choice was taken away and Performance Powersave remained only general tweaks do not affect the performance of special or energozberezhenie (4K in YouTube, etc.);
- aapt was moved from the module in the Quick Switch Addons - from under them in the future will be magic in front of a lot of waiting for all drop dead in this patch (no);
- Added three hosts (empty, disabling hosts) v1.0 - who knows what he needs, he knows what he needs ... Logically .;
- Added four hosts v11.5 (80000+);
- Update the hosts file on the LP to v8.7.4 and alternative (As it were thrust line of MiRoom);
- Other upgrades and minor changes to the hosts file;
- All the files in the patch were re-optimize;
- Some improvements ui_print (Just a few lines have been "cut" that would be on a par (well, almost) in TWRP);
- In the extraction mode I added FIND rmlist.sh (in /sdcard/rmlist.sh) - This means that you can assign to the folder name, and they will be offered in the elections to remove if I found (it will be convenient for those who He asked me what would that change your add and then delete an application);
- Search mode removal has been improved - now it is the actual, rather than all possible derriktoriyam (reduces application latency search for the same work);
- The removal mode has been added to the choice: if it finds rmlist.sh (in /sdcard/rmlist.sh) - Delete the election results every application or with no choice but simply to find a remove without elections - if you trust what is written in rmlist. sh (for the election of the patch does not apply, and will be the default selection);
- The removal mode has been added to the choice: if it finds rmlist.sh (in /sdcard/rmlist.sh) - Delete only under this file or from a file and the patch;
- The removal mode has been added to a number of applications (mainly still in Google went - in patch work more spoiler can be read);
- Departures Magiks Manager'a in no way connected with the patch. Yes, fast switching to the following items increases the chance of his departure, but it is a problem of Magiks Manager'a. He can fly for no reason, this applies to both Canary and Stable builds;
- The spoiler where the items I tried more detail (I hope that more than it was, but I just brushed some of the job descriptions) to describe the election and by-elections to them, rather than just list them (finally (will be improved)) ;
- Added a patch to hide the bangs stock overlays (for Android 9-10) - if they are not present in the most piercing (may not work on the firmware of the type Corvus-OS, on the Havoc-OS - works);
- Added patch to increase the number of icons notification when the recess / hide point of bangs (for Android 9-10) (depending on the established DPI, 590 DPI at a time and placed 5-five icons with a point instead of 4) (works much like Notch Notification Fix) - in two variants: 24px (stock row size in the landscape mode) and 20px (reduced row in landscape mode) (may not work in firmware type Corvus-OS, on Havoc-OS - running);
- Fixed IDNAME NavBarSpace and added value of 5, 15, 25;
- Fixed IDNAME ShowHideNavigationBar;
- Added a patch to change the volume steps, available values: 15, 20, 25, 30, 35, 40;
- Completely redesigned point and Viper-FX Fix yourself working mechanism, you can now choose only one thing: v1.0 or v2.0 (no matter what you put not as MM, selecting any option you restore that set up this (putting v1.0 and v2.0, after selecting you uninstall v1.0 and vice versa));
- Some code multiple choice after choice has been redesigned and optimized (I always do anyhow to work, and then only optimizes);
- Fixed assignment of the Power button on the fingerprint (nothing happened after the selection);
- At MM 20409 are observed with service.sh problems and not only (may not work);
- Added a patch to a new kind of gesture "tablets" - 10 pieces, with more screenshots in the spoiler of the principle of operation;
- Removed patch Immersive Gestural Navigation Bar (transparent "tablet") - is replaced by a patch above;
- Patch Fullscreen Gestures has been moved to a new patch on navye gestural "tablets" - more in the spoiler of the principle of operation;
- Now with the patch will be installed on ViperFX some presets (you can throw me his and I'll add them in the patch) (in / sdcard / ViPER4Android / Profile (Legacy) and /sdcard/Android/data/com.pittvandewitt.viperfx/files/ Preset (Normal));
- Fixed the problem is not very pleasant leading to a complete suspension of MM when installing the AIC system not - concerned ViperFX QuickSwitch and if they are already installed;
- Added patch Global Optimized GPS (only appears on the SDM, or MSM) - Optimizes file gps.conf for better GPS performance;
- Just I remind you all that concerns mounted as a module and having a overlay folder - leads to the battery, with the active Zhora Hide MM.
- As for the design of the patch: now, instead of "NEXT" will | and / or, but rather "EXIT" will // (I hope soon to determine the design, I just I test different options and currently looks haypovo). | - means that the next elections will be in this sub-paragraph to paragraph. A / - means that the next elections will be the last in this subparagraph points to the possibility of coming out of it and nothing stitching (such following items support: 2N-th and 3N th in choosing Dipper, 8 th, 14 th, 19 th , 21 minutes, 25 minutes, 26 minutes, 28 minutes and 34 minutes). Just at some points of the type 34 25 And it works crooked, because you have to make the determination ui - fix will be in the next version of the patch with other interface improvements;
- LED Light Animation Mod has been completely redesigned (as well have been improved themselves sh-nicks): Improved FIND fact that there is in the phone (Flash, Hard Keys, and LED notifications (before it was too, but the curve)) - respectively patch elections are from there on the phone. Just added to the test mode "on the spot", testing the available animation is given a choice: Tests on or sew it tested - more on this in the spoiler works;
- You can also sew a patch or (if installation via MM) and after a firmware upload MM - to do just that, and not only did I TMPDIR cleaning before firmware patch;
- Stereo Mod on Dipper will not be shown on Android 10 (due to the lack of sound through a microphone) - later made a mod on the stereo (if lazy is not);
- Systemless Launcher been greatly improved. Added a couple of launcher to replace. Full correction Lawnchair with firmware prior to initial installation (as my patch can be sewn after a full wipe and then flash the firmware / MM / This patch had a bug that flew Lawnchair Now he does not take off.);
- chmod was replaced by the alternative logical which further reduces the number of problems with Magisk modules to a minimum;
- Completely redesigned installation ViperFX, now as version 2.7 can be supplied as a system application - more on this in the spoiler works;
- In the meantime, I'll take a rest ...
#### V0.5 #### - Added forced Google Sync (If you wrote Waiting to buck up) - only for MM;
- HideGesBar updated to 6.4 - this is the only module that appears on Android 11 (check on the 11th was added in version 0.1 patch);
- Fixed installation HideNavBar and HideGesBar (when added to the installation path and HideNavBar HideGesBar 0.3, forgot to add namepatch ... (Correct one another and break it - rule));
- Version 0.4 has been redesigned the entire installation is installed as a module not, so better to remove the version that put in this version everything changes completely;
- Now in the / system / bin will always be aiopfmdph folder - which will be kept Finder some patches are now installed as a module has not only;
- Miui_Checker evacuated to before. version due to its inoperability - because it did not have some items on Miui;
- Removed set media 0 at any election (when the volume becomes 0) - too much delay, I was hung up;
- Fixed installation Systemless Launcher (not there else set to FIND Fitting not through MM);
- Renamed in Quick Switch Fix Battery Drain Fix For SL Or QS;
- Battery Drain Fix For SL Or QS was swapped places with Systemless Launcher - moved to the bottom of which is logical, just put Systemless Launcher and select the patch immediately;
- The Battery Drain Fix For SL Or QS was added choice (TWRP Only) - if installed Quick Switch or one of Systemless Launcher, will be given the choice if MM - Move the overlay from the Quick Switch or Systemless Launcher and method UnHide GMS;
- Many fixes have also been added and improved universal variables;
- remotely added: mab, MiuiSuperMarket, UPTsmService;
- Rollback of all due to ViperFX of patch version 0.1 and a little of 0.2 (thanks rand Magisk Memeger);
- Append and changed some ui_print;
- Fixed a couple of egregious errors related Show Hide Navigation Bar;
- Removed a couple of unnecessary files;
- In version 1.0 (if it is) will be a maximum of fixes since version even be stable.
#### V0.4 #### - Removed a couple of unnecessary files;
- Added setting Systemless Launcher'ov but Magisk module removably;
- Fixed a bug when you select ViperFX installation as a module - it is not delivered as a module;
- Fixed a bug that did not allow selection of audio engines;
- Added installation of audio engines but Magisk module removably;
- Added a few universal commands to optimize code;
- Added some logical inscription in the elections (if it detects that something is already there, or set / unset) Viper-FX Fix V1.0, Viper-FX Fix V2.0, Stereo in all modes and GPS Fix (I had already done, but forgot to do sdes - just adds to the understanding and the information content of what you are doing);
- Now, when elections in Magisk Memeger volume will always be 0, regardless of whether you press + or -. While it is so, then I think of something with the volume panel;
- Just change up slightly increases the delay elections - even useful for departures from Magisk Memeger with rapid appearance sets ui_print.
#### V0.3 #### - Updated Quick Switch to v3.1.6-2;
- Systemless OPLauncher Updated to version 2.1 have also been improvements in the rest of the launcher (OPLauncher with addons will not shove in the patch);
- Added a few universal commands to optimize code;
- Added installation path and to HideNavBar HideGesBar in / system / overlay / system / vendor / overlay / system / product / overlay with FIND (as was originally intended by the developer of the module)
- Systemless Launcher, Quick Switch, HideNavBar, HideGesBar and GoogleFaceUnLock - does not appear if you Miui (logical);
- HideGesBar has been updated to 6.3 (only numbers, since the files themselves are not changed);
- Maybe something else that I forgot.
#### V0.2 #### - Added setting ViperFX v2.7.1.6 - if put directly through MM, put APK and you just need to restart your phone. Permissive SeLinux put on the next patch and just restart your phone. If through TWRP as modules or not APK will be in the / sdcard / ViPER4Android;
- Added a choice of installation ViperFX v2.5.0.5 in or as a user application (only MM);
- Updated and added system mount'a FIND / vendor for "bezvendornyh older devices";
- On phones with Section / vendor in / system (not a symlink) - Magisk ViperFX module will not work (problem MM) - so put only through TWRP;
- Installation ViperFX will not occur as a Magisk module (in TWRP, when was chosen Magisk setting) if you have your phone with Section / vendor in / system;
- FingerPrint Mod does not appear if you do not have a fingerprint scanner (logical);
- FingerPrint Mod was swapped places with the installation of the Hosts file;
- Quick Switch has been updated to v3.1.6 from 20.04;
- Rename Fix Charging LEDLight in LED Light Off Mod;
- The LED Light Off Mod have been added to the line off the red, green and blue LEDs (tested);
- GPay Fix does not appear if you have not installed the app itself GPay (logical, as the main action of the patch occurs precisely at the prescribed GPay application);
- Added setting 4 launcher system version 2.0 (Systemless Launcher (Alt Variant Quick Switch)): Lawnchair, OPLauncher, OneUIHome, PixelLauncher - Forced activation recent provider (if it finds that the installed Quiuck Switch - remove it);
- Select Systemless Launcher removes Quiuck Switch if it is, and vice versa;
- Added patch Start LEDLight Animation - when booting the phone will flash the LED, hard keyboard, a flashlight - to the elections separately or together (depending on what you have - are supported by red, green, blue and white) (to mi 8 fun option Only LED looks like - it is recommended) (mod to collide with the LED off) - All that is associated with LED - acts as an LED Light off Mod;
- Many fixes / improvements in the code;
- HideNavigationBar, ShowNavigationBar and ShowHideNavigationBar - if put on top - are removed together (logical);
- Noticed departures Magisk manager - his problems, can not withstand the load ui_print campaign - in connection with the added cleaning TMPDIR before stitched.
#### V0.1 #### - Implemented the installation through Magisk Manager (script works around through Magisk variables (volume until is displayed, it will try to "fix") panel);
- Completely changed the design of the patch that is changed depending on where it is sewn - in TWRP, or MM (in beautiful MM, as Unicode to Android wider than the meager TWRP);
- Changed variables paths will continue to improve with the mounting (same fixed mount / system_root);
- Set of revisions to this poluperenosu compatibility with normal operation in Magisk Manager;
- Changed (some pullback not universalschinu) and improved a lot ui_print (will be improved and changed in certain triggers);
- Added setting Brutal Busybox v1.32.1 (thanks
feravoltbehind a computer) as a Magisk module and the system (or the bin directory xbin) with activation of symbolic links (as Busybox useful to me for the normal operation of the patch and / or some of its functions (tested until it works only on the tar - used to unpack tar.xz why some TWRP be unable to decompress it));
- Added setting QuickSwitch (only as Magisk module) as the terminal (v13) version and the conventional (APK install TWRP costs through reliable crutch that it is not lost after selecting the launcher and then restart) (v3.1.3);
- Fix Now QuickSwitch for terminal version and no;
- Added file for overlay / product and the updated file to / vendor for a fix QuickSwitch;
- Added setting ViperFX Legacy v2.5.0.5 (like Magisk or compulsory installation of wood with yourself APK directly into the system) (if they request to do the installation 2.7.1.0, even though I took it because there 2.5.0.5 normal interface and disable Selinux it is useful not using SELinux Changer) with my mod icons and interface (for himself made this point, but can someone come in handy)
- Removed test setup items: Firmware, Magsik, Gapps (will return in the future can do if randomly generating the last date and version);
- Added a fix installation of GPS as a module for Whyred (which does not seem to me to-date and can be cut in the next version);
- Since the added / deleted / changed some items - Model Behavior - on the spoiler in the operating principle of the patch;
- Updated Fullscreen Gestures (he's in the patch Without Strip And Working Gestures On The Sides I incidentally confused with With Transparent Strip And Working Gestures On The Sides and they worked well as they should, but on the contrary - corrected) to v6.2 (Build 8 );
- Added an option (the ban to shit) Libov off points for fixation of sound wheeze at 1.0 and 2.0 BETA how Magisk module (tested);
- Removed ReadMe of zip (Shiz);
- Updated DDVFEC from 03.05.2020;
- DDVFEC not appear when stitched through Magisk Manager (logical);
- Now, the team find, unzip, and the like are sent to / dev / null (in Durkee);
- Updated GPay Fix to version 2.2 (with completion and full integration scripts and selecting delete the cache / data Gpay application (thanks to my script originally keycheck));
- Added 26 for the GBoard, c installation Magisk as a unit, and not (at MiRoom and Havoc-OS - running));
- Improved removal of layers Swift Installer (Now also removes Magisk module);
- Removed some of both informative and useless messages that were in previous versions (almost purely on the UI choices (how do you want to do with the Wolf ui_print));
- Removed the selection to include other items;
- Selection of the installation as a Magisk module, and is not - does not appear if you put a patch over Magisk Manager (placed immediately Magisk module);
- Added 2 more options to hide / show navbara now if you choose Magisk, will be installed with system.prop bar is hidden;
- Added another 2 Stereo alternative fashion for Dipper (In Q blobsah microphone does not work at Havoc to 3.3 so accurately);
- Added a patch to increase the margins by using the keyboard as a Magisk module and no - There are 4 options: Standart (0 (or disable / remove the patch (for those who have the default firmware is greater than 0))), the Small (10) , Medium (20), Large (30) (appears only for Android 10);
- Removed MagiskFiles folder;
- Added patch SeLinux Changer like Magisk module (appears in all modes (in TWRP default choice will always be the Permissive - in TWRP from Permissive, and visibility selinux will always be different than the real system)) with the possibility of switching to Enforcing or Permissive (if it finds that the system in Enforcing - offers select Permissive and vice versa);
- Because of the many changes and improvements may not be correct conclusions informative messages and not only (correct if found);
- The archive with the patch, some items have been packed more (to reduce weight) - unpacked after the selection of these same elements with a minimum of delay;
- leave the choice of deleting passwords / Graf.Klyucha / pincode / etc. in Magisk Manager (do not know how it will be useful in MM);
- Disable logging - if necessary copy logs through TWRP / Magisk Manager manually (checkers have been pulled out and others for the correct operation of the patch);
- leaving one method Binda key selection itself does not provide a bind. This is due to the method of randomly work bindi both keys on different phones / TWRP / MM (This method is tested on 3 different phones, 5 insertions and 4 TWRP, touch / screen can safely flipping);
- Added patch BuildProp Tweaks like Magisk module (with Performance option (here xs, or as + or - faster) and Powersave (on it rigidly lag)) - placebo? Maybe yes. To put or not - your choice;
- Added "Delete Mode" (looking for an application if it finds - asks to remove or not (displays the name of the folders / APK).)
That is all that is deleted (delete what you know, I'm not going to chew - made for myself and that's all delete and before / after replacing alternatives) (You can also remove GCam!) - the list will be updated (perhaps because there are basic)
#### Miui-Shit ####
AnalyticsCore
CatchLog
CloudPrint2
FM
FM_TEST
FileExplorer
FileExplorerGlobal
Gamecenter
GameCenterGlobal
GlobalTrendNews
GlobalUserGuide
Health
HybridAccessory
HybridPlatform
IdMipay
InMipay
Joyose
KoreanIMEStub
MSA-Global
MiBrowser
MiDrop
MiGalleryLockscreen
MiHealth
MiMusic
MiPicks
MiService
MiShare
MiVideo
Mimoji
MiuiBugReport
Miuicompass
MiuiScanner
MiuiVideo
MiuiVideoGlobal
MiuiVideoPlayer
Netflix_activation
NextPay
Notes
PaymentService
PersonalAssistant
PersonalAssistantGlobal
Quicksearchbox
TouchAssistant
Videos
XiaomiKeyboard
YouDaoEngine
facebook-appmanager
facebook installer
facebook services
greenguard
#### Google-Shit ####
BuiltInPrintService
CalculatorGooglePrebuilt
CalendarGooglePrebuilt
Chrome
Drive
Duo
GalleryGoPrebuilt
Gmail2
GoogleContacts
Googledialer
GoogleFeedback
Googlekeyboard
GooglePrintRecommendationService
GoogleTTS
HotwordEnrollmentOKGoogle
HotwordEnrollmentXGoogle
LatinIME
LatinIMEGooglePrebuild
LatinIMEGooglePrebuilt
LatinImeDictionaryPack
LatinImeGoogle
Lenses
MarkupGoogle
MatchmakerPrebuilt
NexusLauncherRelease
PartnerBookmarksProvider
Photos
Picots
PixelLiveWallpaperPrebuilt
PrebuiltBugle
PrebuiltDeskClockGoogle
RecorderPrebuilt
SafetyHubPrebuilt
SoundPickerPrebuilt
TipsPrebuilt
Turbo
TurboPrebuilt
Velvet
Wallpaper
WallpaperPickerGooglePrebuilt
WallpapersBReel2019
WellbeingPrebuilt
YouTube
arcore
com.google.ar.core
talkback
#### Stock Android-Shit ####
AdAway
Audiofx
BatteryTile
BookmarkProvider
Browser
CMFileManager
Camera2
Delete_Var_Univers
EasterEgg
Eleven
Email
EngineerMode
ExactCalculator
Exchange2
FM2
FMRadio
Gcam
Gallery2
GoogleCamera
HTMLViewer
Jelly
LineageSetupWizard
Mms
Music
Music2
Musicfx
NexusLauncher
PixelLauncher
PureBrowser
Recorder
Snap
Tag
Terminal
Trebuchet
Via
WeatherTile
Ygsp
Yellowpage
madCamera
madLauncher
madWallpapers
messaging
- Added Power Fingeprint Mod for many firmware until the elections: the power button Turning the screen, go to your home screen, Run the default player, camera launch Launch Browser Back key, Menu key, switch between applications (looks nice, to switch between the two applications over recent) button Play / Pause, Run default Assistant. - Installation Magisk as a module, and is not;
- Added 7 audio engine with Masik X for Dipper (for Miui firmware on Havoc tested, but wound up with a fixed sound "Viper-FX Fix V2") (3 for PIE and 4 for the TEN - only as long as Magisk module!);
differences from
the merged version- Billion;
- Reworked version check Android (SDK supports all, even on Android 0 sew), as added support for the basic version - 4.4.4, 5.1, 6.0. Selecting a version is not given if the patch did not find it in your shit firmware;
- to select the phone now appear on the actual version of the Android phones the most (9, 10+) (Who?);
- Everything that is related to the type of build.prop modes: GBoard Themes, BuildProp Tweaks, NavBar Space, Hide NavBar - backup in build.prop (Data / Time) .bak, so if there is a problem - it will be easier to recover;
- Quick Switch Fix was verified on some firmware / phones - as a result, it can both help with zhorom batteries (in 10% of cases), and make the abyss network break notch / indent overlay curtain and maybe something else - So he was taken away;
- Added an alternative fix for battery Jora Quick Switch - he played with force Magisk Hide (or rather with com.google.android.gms (when the phone start) which may affect the GPay or similar work (it will be possible to hide back, although some insertions after restarting Magisk it back itself Hayden, or vice versa way back not hide except forced through the terminal or patches) (this method works in 99% of cases). also zhor observed after removal Quick Switch and reset provider to the drain and the fixed also helped ;
- Added patch All Regions;
- Added patch Hosts files from LP (67000+ lines) and alternative (140000+ lines) - Magisk as a module, and is not;
- Added firmware logo.img without inscription Unlocked and stock logo.img for Dipper;
- Added firmware splash.img without inscription Unlocked and stock splash.img for Whyred;
- Added patch Fix Charging LEDLight - Disables charging indicator - only as Magisk module, do not module until it is unrealistic;
- Added mount / cust (not Mount unless Miui);
- Now there is no choice in the selection if it finds that the file after selecting installed and offers to remove / restore and immediately offers to delete / restore (logically);
- Moved patch work GCam without franca of CPFMD with many improvements (as updated stub);
- Everything that is placed as a module can be placed on top of the module (everything is clean and overwritten (logical));
- Face UnLock does not appear if you do not find the Google services (logical);
- Maybe something else I've forgotten a lot of changes, 99% patchabylo perelopacheno.
Changelog (EOL)
#### v1.3 (BETA) #### - Changed Magisk location code (united that would not be repeated code);
- Changed ui_print (added information content) that are stitched (will be improved) for more understanding;
- Added a lot of test code and the elections (for yourselves);
- possibility is realized not only through the installation of TWRP, but also through Magisk Manager directly;
- Added install the latest DDVFE who is now in the patch;
- Added alt version hiding navbara / tablets with and without robots side gestures;
- Added search and delete services.sh detection in fixed Ainur Sauron folder and the folder with the updates;
- Added patch installation from under my patch (patch it with native code instead of the code under which I would have pulled out of the patch that was going to flash) Thanks for the implementation of
nonamer1990!
in this post.
These include: DDVFE, Patch on the camera (three versions, 3.7 O +, 3.7 Q- and yet unreleased 3.8) - "For ordinary users". For themselves: Rom, Magisk, Gapps (Bit, Open) (on this I then popoteyu to generate the latest possible date and do for everyone, but in any case, while it may appear to all (there is a choice to install or not).). All these items appear, if they find a patch of the original name in the / sdcard (Gapps versions of the Android version will appear).
- Added search and delete Swift Overlay, can someone will be useful to my friend who suffered Bootloop after Swift Installer'a (only appears if there are layers, APK does not delete);
- Added patch installation which makes the transparent strip by using gestures with the working tens gestures on the sides (Module Magisk not);
- Added patch installation that removes strip using gestures with the working tens gestures on the sides (Magisk module or not);
- Added Fix for the terminal QuickSwitch version (removes battery Jordania) (appears there is a terminal installed QuickSwitch);
- Just added myself to the installation Viper-FX modules, Busybox - Magisk firmware to detect if we set up a system reboot when a clean installation (you have these items do not appear);
- Repaired choice of versions (this error is and in a patch on the camera (yet to version 3.8 it will not be)) Android if the patch did not find them - obsessed selection or to exit, or to the last selection (who is faced with this and not He told me - butlupa trap);
- Added ReadMe in the zip patch in Russian;
- I Changed a lot of code, suffered / added / changed / fixed variables (one variable at a variety of activities, etc.).
- If there is a problem or something is not copied / can not find or have any suggestions, there is always a QMS or Telegram, throws logs and explain the problem or your proposal - will be glad to (none).
- Though I did and test / updated / added, but there is a possibility that I might break something / broken (I can not live in TWRP). And anyway, I'm doing these patches mood and free time.
#### v1.2 (BETA) #### - Added search and delete services.sh detection ViperFX folder in the folder with updates Magisk;
- Just cleaned and repaired their variables + add those ui_print.
- fixes the little things, the most important thing is variable;
#### v1.1 (BETA) #### - Added alt stereo modes for Whyred (such as running, can be useful), some have a standard bug with inability to hear the other party before switching to loud and back again, I did not watch at home, but this is the place to be;
- Fixed a problem with FIND stereo patch (without Magisk) for Dipper (replaced modal files as stock);
- Added item "Other" - in the future it will be a lot of different stuff / useful (I personally for myself one patch removed the pair of modules and patches just as it is all combined into one to be mounted as a module so there Magisk)
- The item "Other" item moved to remove an additional confirmation of the password;
- Added hide the nav bar item in the item "Other"
for here itAnd added embodiment as setting Magisk / Not Magisk, Build.prop version removably first on / off / switching the second;
- Added a fix bootloop place on the 10th after installing Android ViperFX usual and Legacy (item appears when the 10th Android'a);
- Fix for small things, a patch on the camera is delayed (lazy, and do not have time, you can install + APK / ZIP_ANX out of memory!).
#### v1.0 (BETA) #### - Stereo Mod Whyred on can be set as Magisk module;
- In the future, will be added a couple of new useful items (in my head a lot of things, it is a pity that the Aroma Script dead, so it would have to do these patches);
- In Stereo patch had a couple of fixes in the code;
- Fixed all the variables (remove duplicates) - has broken a lot;
- Added and repaired a lot of code (well, just maybe a little is broken);
- FaceUnLock for Android 7.1.2, 8.1, 9.0;
- Added a choice (so far) Dipper and Whyred;
- Dipper include: enable / disable the sound Libov (fixed ViperFX (Actually yes)?!), Stereo modes in two flavors (there is a third kind of network but the work is the same (maybe not, then we'll see))
- Whyred includes: Stereo mode in one embodiment (not yet looked for more, I know that runs crooked, can someone go down), GPS Fix - it worked and works, but if relevant?
- On the 10-ke item FaceUnLock removed;
- GPay Fix (both Magisk module) improved performance tested on Havoc 3.0 (recommended to put it after the set-up and run GPay);
- Updated keycheck file;
- Added a choice of versions of Android if the patch does not find (check need to patch FaceUnLock and other checks, without it in any way) his own (will be converted and added a couple of other versions (in thinking));
- Added abort the point of selection versions of Android if it has not been selected (to be redone (in thinking));
- Added # abort button if you have used is not enabled (pressed the same button twice on one choice);
- Added abort when you have assigned two buttons on one action (closes # code, as was added in a week after the patch at the camera - as should have been done before) - will improve check on false keys Bind;
- Fixed selection keys work (the first version without self Binda) where you can press "-" to miss two points - was due to the fact that if you do not touch the screen and immediately press "+" after the notice "Vol Key Test"
"Press a Vol Key:" - fixed (but this method may not work (like working 10-ke - tested, will improve)), but was added to a message that is recommended to touch the screen for self Binda keys (you can, and so and so choose but I recommend method 2);
- When will create a log abort CPFMD_Log_Abort.tar.gz;
#### v1.6 #### - Remove / replace / I fix some of the bones in the code.
#### v1.5 #### - Removed exit if it finds no suitable model device / misspelled code name - as in the case P3R type EEPROM.
#### v1.4 #### - Google Face UnLock can be supplied as Magisk module - if any;
- Google Face UnLock now only for Android 9 (Who is using 8.1 on this phone?)
- Fix the little things.
#### v1.3 #### - At the little things I edited the code for your convenience;
- Returned the complete script select the volume buttons (but originally it was normal, but I changed it a bit, and this caused the "uncontrolled choice if you press the button + or - at the time of writing up");
- Improved logging;
#### v1.2 #### - Updated method for deleting files in the patch Reset Screen Lock;
- Added more informative selection of items;
- Changed / Fixed / Added a lot of things in the code;
- Added a record of all logs in the sdcard / AIOPW_Log.tar.gz (will be improved);
- Modified and improved mounting system (Just what was installed before hand - will not be unmounted);
#### v1.1 #### - Added patch GPS Fix, first sewing backup stock Lieb and replaces the modal - Second Lieb stock returns in place.
#### v1.0 #### - Added patch Google Face Lock for Android 8.1, 9.0 (patch itself defines the version of Android);
- Added a patch Reset Screen Lock.