Redmi Note 5A / Y1 Lite How to change the boot logo (Splash logo)
Purely by our machine !!!
Description :
It is not bootanimation, is a screensaver ( 'Mi' boot logo, which is displayed when the device is turned on)
This is for the Redmi Note 5A = Y1 Lite = only ugglite (options Snapdragon) ..
It is not dlya'Redmi Note 5A Prime = Y1 Lite Prime = ugg '.
Requirements:
1.
ROOTfor Xiaomi Redmi Note 5A / Y1 Light (ugglite)
2. Required: emulator application terminal or User recovery, or at least work fastboot computer, TWRP
3. You do so at your own risk.
Splash.img steps to create a screen saver:
1. Download and extract it:
Redmi_Note_5A_Y1_Lite_Splash_Maker2. Make sure you have an image with a resolution of 720x1280 or below.
INFA:
This program has a certain amount of a few can go to download the image, so that only a very lightweight image can be used.
(If you change this limit in the script, the picture will not appear fastboot in fastboot mode ..)
It is recommended to use an image with only 2 or 3 colors, like black and white photos.
So you have to try a lot of pictures until you get success.
3. Now rename image logotip.png logotip.jpg or in accordance with its format and replace it in the folder "pics" folder extracted.
(Similarly, you can change the other pictures too)
4. Finally, run 'CREATE_LOGO, to create splash.img, which you can find in the folder "output" when finished.
Manufacturing Process:If you receive the error message "large picture", it is impossible to create a logo using the following image.
In this case, try any of them below:
1. Try
compressPNG.comreduce no colors in the PNG image.
Upload your photo, click "Settings", reduce the number of colors to 2, apply and load it and try again.
2. Lower the image resolution.
For example, this image:
thisYou can edit something like this:
this(I hope you understand what I'm saying)
3. Try a different picture.
Next steps:
Zdelali backup splash.img stock terminal emulator via
su
dd if = / dev / block / bootdevice / by-name / splash of = / sdcard / splash.img
Installation :
Now select any easy way to install:
1. Use rekaveri:
Transfer flashable_splash.zip to the device and from flash TWRP or CWM or Philz or any other user recovery.
2. Sew with the terminal emulator:
Transfer splash.img the internal memory of your device, Open the terminal emulator and type the following to flash it:
su
dd if = / sdcard / splash.img of = / dev / block / bootdevice / by-name / splash
3. For firmware from Fastboot mode:
fastboot flash splash splash.img
I note:
If something goes wrong or the device will not boot, application in advance to make a backup of the user splash.img recovery or fastboot.
You can publish your created screen image ..
Link to download :
Redmi_Note_5A_Y1_Lite_Splash_Maker.zip (9.01 MB)
Translated by himself more available !!!
There is also a splash in the cap stock to recover, or to use as a basis for the patch to rekaveri !!!!
Who seeks will always find!!!
Post has been editedstydent21rus - 04.04.18, 15:40