TP-LINK ARCHER C50 - discussion [0.9.1 2.1 v0045.0 Build 160,318 Rel.47820n] | [Wifirouter] [wifirouter]: 300Mb \ s - 867Mb \ s | one



Rep: (0)

TP-LINK ARCHER C50
wifirouter: 2.4GHz (300Mbit \ s) - 5GHz (867Mbit \ s) | USB: 1
Attached Image


Topic rules
Attached Image

Description
4 LAN ports 10/100 Mbps
1 10/100 Mbps WAN port
1 USB 2.0 port
WPS / Reset button
Wireless Broadcast On / Off Button
Power on / off button
12V / 1.5A
182.95 x 123.5 x 32.1 mm
2 external fixed antennas
Specifications
https: //www.tp-link.co...50.html#specifications

QoS (prioritization of data) WMM, Bandwidth Control
WAN connection type Dynamic IP / Static IP / PPPoE /
PPTP (Dual Access) / L2TP (Dual Access)
Management Access Control
Local management
Remote control
DHCP server, client, list of DHCP clients,
address reservation
Port Forwarding Virtual Server, Port Triggering, UPnP, DMZ
Dynamic DNS DynDns, Comexe, NO-IP
VPN traffic pass PPTP, L2TP, IPSec
Access Control Parental Control, Local Management Control, Node List, Scheduled Access, Rules Management
Network security (firewall) Protection against DoS attacks, SPI firewall, filtering by IP address / MAC address, domain name, binding by IP and MAC address
Supported protocols IPv4 and IPv6
Shared via USB Support Samba (storage device) / FTP server / media server / print server
One visited network visited network 2.4GHz
One 5 GHz guest network
Firmware
Useful


пїЅ Attention! There will be no new releases of LEDE, and OpenWrt 18.06 is an extreme release and further development of LEDE. Questions like "and when there will be an update," etc. are deleted!


Post has been editedferhad.necef - 24.02.20, 22:30
Reason for editing: for firmware instruction router TP-LINK ARCHER C50 V4



Rep: (4)
2zero @ 08/08/2018, 14:11*
...
Has managed to flash. Happened. Everything is cool, but WPS did not work for wai wai. I want to go back and pass the piece of metal, but no. Do not sew the original from the web. Pretends, and remains on OpenWrt. Sho do?

I only came to Openwrt through wi-fi. I decided to flash the factory one also through tftd. Version 1. Got a brick. When turned on, red lights up for a moment and everything goes dead. Now it seems like a programmer is needed, from the topic about c20



Rep: (39)
* viks71000 , one to one!



Rep: (16)
TP-Link Archer C50v1 without any problems stitched on tftp. Naturally, if you do everything right.herea lot of pictures.
and that's why people are bringing their routers torecovery only through programmer it will be clear if you look at the code of the doder with a slightly armed look):

Attached images
Attached Image



Rep: (19)
+1 also after openwrt died during the firmware on the drain.



Rep: (16)
and this is why people are bringing down their routers to recovery only through the programmer, it will be clear if you look at the code of the lader with a slightly armed look):

I see people do not understand, because in a personal ask how to recover. but to restore it in any way ... if software restoration is implied.
why nothing - can be seen from the picture. it is enough to see only two key points:erase and 0x00000 . Ie when restoring the firmware, the flash drive rubs from the very beginning. Ie with buta. and if the file is incorrect, the boot is simply killed. Ie after the first unsuccessful time, the router is dead.
who wants to expand the horizon for recovery - can lookhere).



Rep: (4)
theme for restoring a similar device without solderingTP-Link Archer c20 - Discussion (Post Stafilo # 77296381)

Post has been editedviks71000 - 25.12.18, 16:00



Rep: (1237)
+1 brick, take in the ranks. While waiting for the programmer, tell me plz, will the MAC address survive after the firmware? Or will there be some default? Or in general there will not be any?



Rep: (1)
I bought this router in the DNS at the end of November 2018. Router version v4 00000002. and firmware 0.9.1 0.1 v009b.0 Build 180,508 Rel.41966n (5255). After 14 days, the router started working WI-FI intermittently and brought back to the shop for repair guarantees. Thus warranty repair any fault is not obnaruzhilos.A router fault is in WI-FI on any channel and at 5 GHz and 2.4 GHz. Especially at 5 GHz frequent crashes. If someone in the home has included on its smartphone Internet, is already on the second device Internet starts to work properly - it is 2.4 GHz. On the laptop at a frequency of 5 GHz channel width of the channel 48 and 80 is impossible in a browser open more pages 3 - router begins to click, heated and even breaks WI-FI. In the 5 GHz on any channel and any channel width it does not work so perfectly. With this router only sit on a cable, and bought it for WI-FI. Maybe the whole thing in itself firmware? But the firmware on the router has no will and no one knows when. It happens that the router itself clicks - clicks can this body. Even when the power supply is disabled via the button, and then for a while the router clicks. Now here I do not know what to do, but at least 3-year warranty.



Rep: (1237)
romas4ka @ 01/06/19 17:21*
But there are no firmwares for this router yet and it is not known when they will be.

How is it not? Did you watch the hat at all?



Rep: (1)
* Schakal There was a view of version 4 of this router. If you mean OpenWrt firmware, then it is installed on version 1. It is on version 4, so far no firmware is available. I pointed out that I have exactly 4 version and indicated which firmware is installed. You somehow inattentively read. Sorry, did not want to offend. Merry Christmas to all.

Posted on 1/7/2019 08:44:

I forgot to add that in version 4 there is no USB port anymore. And version 4 with Russian firmware. Archer C50 (RU).



Rep: (1237)
* romas4ka yes, sinful, inattentively read, sorry .. Here is here craftsmen compiled firmware on V4.



Rep: (0)
http://dl.eko.one.pl/g...quashfs-sysupgrade.bin
It was done right in the webmord of the official firmware without any recovery modes.



Rep: (23)
people, how can you make a list of countries? In the old router there was such a feature, this was removed (you know why =)))



Rep: (3)
The firmware is installed via the web interface of the router
OpenWrt (LUCI) for TP-LINK Archer C50 (RU) v4: https://yadi.sk/d/LPD0pWJXt9kLxw



Rep: (3)
The firmware is installed by Tftp
(Rollback) Stock (Without U-boot, stripped)TP-LINK Archer C50 v4: https://yadi.sk/d/JeMmFdZLCtGwaA

Post has been editediOSDeveloper - 20.02.19, 09:47



Rep: (8)
Found user instructions for the router for all revisions.


Post has been editedscooter4 - 20.02.19, 12:21



Rep: (11)
Tell me I have a router tplink Archer c50
There is a game deteni2, I need for a certain ip to allow me to connect, and the rest to ban, all this on certain ports, ports udp 3074, 3478-3479
I play on ps4

Post has been editedlexxxxxxxxxx - 20.02.19, 15:22



Rep: (3)
Firmware installed via TFTP
(Rollback) Stock (Without U-boot, stripped) TP-LINK Archer C50 v4:https://yadi.sk/d/JeMmFdZLCtGwaA


European firmware (EU), does not have Russian language, perfectly stood onArcher c50 v4 (RU) . It works stably, I update now with EU firmware ... a greater number of channels in 5 GHz mode, and indeed the “feeling” that it is more stable ... On top of the EU firmware, you can roll RU via the web interface

Post has been editediOSDeveloper - 20.02.19, 18:21



Rep: (3)
OpenWrt (LUCI) for TP-LINK Archer C50 (RU) v4:https://yadi.sk/d/LPD0pWJXt9kLxw

RecommendDO NOT PUT THEME : Material like so called, and change to Bootstrap, otherwise the web muzzle will blunt ...

Post has been editediOSDeveloper - 24.02.19, 21:35



Rep: (1)
* romas4ka , Archer c50 v4 (RU) I had the same problem on the stock firmware, I took the firmware from the site's office, installed the interface via the web and changed the port to 9, for a month the flight was normal and there were no failures and disconnections at 2.4 and 5 GHz everything was stable.


Full version    

Help     rules

Time is now: 23/06/20, 12:01