Hello!
A brief instruction on the firmware of this router on the OpenWRT firmware, and of course, roll back to the official firmware.
We will flash the program
Tftpd(having previously downloaded it).
1. Download the archive from the post and put the file “ArcherC50V1_tp_recovery.bin” in a separate folder.
2. Change the ip-address in your network card on Big Brother (computer) to 192.168.0.66 (the mask is assigned automatically: 255.255.255.0).
3. Connect the patch cord to any Lan port on the router.
4. Run Tftpd on behalf of the Administrator.
5. In the Current directory field, select the folder where you dropped the firmware file.
6. In the Server interface field there should be the IP address of the BB, which was specified above (192.168.0.66).
7. Turn on the router by holding the WPS / Reset button until the WPS indicator lights up.
8. The TFTP utility will automatically download the firmware to the router.
Rollback to the official version:
Sew the router from the web interface with the file “Archer C50v1_0.9.1_1.0_up (150325) .bin” from the archive.
Attached files
Archive WinRAR.rar(12.59 MB)