> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.


860 pagesV  < 1 2 3 4 5 6 > »  
 
REPLY
> Xiaomi Redmi Note 5 Global / Note 5 China - MIUI Firmware
Poll
Installed firmware
Firmware from kosmos2011 [ 205 ] ** [8,17%]
MiuiPro [ 257 ] ** [10,24%]
Global stable [ 870 ] ** [34,68%]
Global developer [ 207 ] ** [8,25%]
Miui.AM [ 4 ] ** [0,16%]
Xiaomi.eu [ 117 ] ** [4,66%]
Xiaomi miui hellas [ 4 ] ** [0,16%]
Masik ™ [ 614 ] ** [24,47%]
Mi-globe [ 21 ] ** [0,84%]
MiRoom [ 138 ] ** [5,5%]
RevolutionOS [ 15 ] ** [0,6%]
MiNovo [ 23 ] ** [0,92%]
MIUI Infinity [ 34 ] ** [1,36%]
Your arb?
3 [ 125 ] ** [4,98%]
4 [ 1451 ] ** [57,83%]
Did not check [ 921 ] ** [36,71%]
Having root rights?
Yes [ 1634 ] ** [65,13%]
Not [ 868 ] ** [34,6%]
Is the bootloader unlocked?
Yes [ 2077 ] ** [82,78%]
Not [ 426 ] ** [16,98%]
Is there enough information in the header for flashing the phone yourself?
Yes [ 2284 ] ** [91,03%]
Not [ 209 ] ** [8,33%]
Total votes: 2509
 
bullik01
Message#1
09.03.18, 16:20
Teamsavagemessiahzine.com
*********
[offline]

Group: Curators
Messages 6838
Check in: 31.07.12
Oneplus 5T 8/128

Reputation:-  2246  +

Xiaomi Redmi Note 5 Global / Note 5 China - MIUI Firmware
Attached ImageHMN5P, Xiaomi Redmi Note 5 Pro / Note 5 China,whyred
Description | Discussion | Purchase | Accessories | Marriage and Repair | Xiaomi club | Camera talk | Mi Account | Power consumption and autonomy | Modification and decorations | Bootloader unlocking | Custom Kernels | Unofficial firmware | MIUI firmware


F.A.Q.

Important information!
In connection with the innovation Xiaomi, namely the introduction of the system "Anti Roll Back" (Antiotkat), cases of flashing bricks have become frequent.



Drivers and Utilities
Mi software
Xiaomi firmware updater
Mi Flash
savagemessiahzine.com | AFH| (Mi Flash) Russian - Bullik01 | 2018.05.28.0
MIUI | AFH | (Mi Flash) MIUI ROM Flashing Tool | 2018.05.28.0
MIUI | AFH | (Mi Flash) MIUI ROM Flashing Tool | 2017.04.25.0
MIUI | AFH | (Mi Flash) MIUI ROM Flashing Tool | 2016.08.30.0
MIUI | AFH | (Mi Flash) MIUI ROM Flashing Tool | 2016.04.01.0
MIUI | AFH | (Mi Flash) MIUI ROM Flashing Tool | 2015.10.28.0

MiFlashPro
savagemessiahzine.com | AFH | MiFlashPro | 3.3.703.67 - Flashing Xiaomi smartphone from recovery mode, without unlocking Bootloader

Mi Unlock
MIUI | AFH | Mi Unlock | 3.3.827.31
MIUI | AFH | Mi Unlock | 2.2.406.5
ADB / Fastboot and others
savagemessiahzine.com | ADB Driver Lite | 32/64-bit
savagemessiahzine.com | QDLoader HS-USB Driver | 32/64-bit
savagemessiahzine.com | Platform-tools (adb / fastboot) | r.25.0.4 | Windows
savagemessiahzine.com | Platform-tools (adb / fastboot) | r.23.1_. | Windows- XP support
savagemessiahzine.com | Platform-tools (adb / fastboot) | r.25.0.4 | Linux
savagemessiahzine.com | Platform-tools (adb / fastboot) | r.25.0.4 | macOS
AFH | Minimal ADB and Fastboot | 1.4.2 | Setup
AFH | Minimal ADB and Fastboot | 1.4.1 | Portable
Google | Dropbox | 15 seconds ADB Installer | 1.4.3

Xiaomi Check & Flash
savagemessiahzine.com | Xiaomi Check & Flash | 0.2
savagemessiahzine.com | TOOL ALL IN ONE - Drivers | Unlock | TWRP | Factory Image | Stock Recovery

Hashtab file checksum utility
USBDeview a list of all USB-devices with the possibility of their removal from the system

Firmware

Template design post with firmware
OTA update is on the following firmware:
  • Official- China / Global (Stable / Developer)
  • Xiaomi.eu- Stable / Developer
  • MIUI Russia- Stable / Developer
  • MiuiPro- Stable / Developer (if you have a paid subscription)
  • RevolutionOS
  • MiNovo- Developer


Official:
Localized: (TWRP only)
Updateable post with all firmware
Archive firmware (no longer updated)
Instructions
Installing firmware, Upgrade
Installing TWRP, getting Root

Scattering
Sensor Recovery, EFS

Loader
Anti-rollback

Recovery
Modems, Images, System Files
miscellanea
Uninstall / Disable Xiaomi / Google Services / Applications
Google FRP Workarounds
Poll results
5.03.2019
Attached Image

10.01.2019
Attached Image

09.09.2018
Attached Image





For filling caps, please contact gyord at QMS

Post has been editedgyord- Today, 10:38
Reason for editing: Firmware Versions on GD
RechtsAnwalt
Message#22
10.03.18, 22:44
MEIN HERZ BRENNT ...
*********
[offline]

Group: Honorary Gameday
Messages 3670
Check in: 02.10.10

Reputation:-  1848  +

M
Subject moved to subsectionXiaomi
From now on, this topic is fully operational.

download

and Rules section "Android - Firmware".
I recommend to refrain from flooding and offtopic.
I hope for understanding and pleasant communication!


--------------------
Die Würde des Menschen ist unantastbar!
elvis574184
Message#23
11.03.18, 00:10
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2062
Check in: 30.07.13
Xiaomi Redmi Note 5 3/32

Reputation:-  148  +

Please add this to the cap!


--------------------
Xiaomi Redmi Note 5 3/32Installed Masik X 1.6
elvis574184
Message#24
11.03.18, 00:10
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2062
Check in: 30.07.13
Xiaomi Redmi Note 5 3/32

Reputation:-  148  +

bullik01 @ 03/10/18, 14:37*
Types of MIUI firmware and their differences


For new users of Xiaomi smartphones and just newbies, the types of firmware, their differences and why there are so many types of them are often incomprehensible.
Therefore, many users simply do not update their devices or, on the contrary, are waiting for updates on firmware that will never be updated.

And so, let's look at the variety of firmware MIUI, so that later you know that the firmware MIUI are divided into several types and subspecies.
Initially, MIUI is presented in two versions: the Anglo-Chinese (China ROM) and global (Global ROM).

China ROM
The “Anglo-Chinese” version is focused on China and is equipped with various functions and software relevant only for China. Of the available languages, it contains only English and Chinese, which is clear from the name.


Global ROM
It is “Global”, “Multilingual”, in turn, is aimed at users outside of China and is not provided with services for China, but on the contrary, Google services are installed. There are many more languages ​​available, among them Russian and Ukrainian.


Developer ROM
She is “Weekly”, “Developer”, “Beta”. Developer firmware is the most relevant and innovative, as it gets all the innovations first. This firmware is official from Xiaomi itself and first of all it was created for advanced users to test innovations.
It is updated every week, usually on Friday, with the exception of Chinese holidays and serious bugs, when developers postpone the release of the update. However, you should not be afraid, if you encounter an error, most likely, next Friday it will be eliminated.
Yes, and many users use the weekly firmware without worrying about bugs.
Formation rules and firmware release number you can see here.


Stable ROM
She's “Stable.” This firmware, like Weekly, is official and is released by the MIUI development team at Xiaomi. It is the main assembly and is a kind of standard:
It is stable, all functions have been debugged and optimized, all the bugs that are found in the weekly firmware have been fixed. It is recommended to install it if you do not strive for all the innovations and related bugs, but you need a stable system operation without surprises.
The name of the stable firmware versions is not tied to the release date, but to the accumulated updates, so it is updated irregularly. Updates can come every two weeks or once every three months.


Ported rom
She is “Custom”, “Informal”. The number of custom builds includes various localized versions from third-party development teams, assemblies of enthusiasts (author).
Custom assemblies are always based on the Stable or Weekly official assemblies. They can also be updated once a week, and with a large interval. Many custom assemblies are not updated over the air, so you have to install them every time. You will ask quite a reasonable question, and what is the difference between the firmware localizers. You can read the answer to this question here.


Samopal ROM
This is a kind of subspecies, a branch of custom firmware. I apologize for such a free interpretation of the names of these “versions” of the firmware, however, recently they have become even more and unscrupulous sellers do not disdain to install them on smartphones of gullible buyers. Basically, these are handicraft firmwares with disgusting translation, frequent errors and commonly encountered bugs. Stable operation of such firmware is absolutely not guaranteed and often spoils the impression of the device. It is always recommended to install assemblies of the first three types, but rather simply Stable.


Other firmware versions
There are several types of firmware that are not so common. TD ROM and WCDMA ROM - firmware created for a specific type of connection in a particular country.
For example, the TD version is designed for the same type of 3G connection only in China. Phones with TD ROM will work only within China, and in our region the sense of them will be slightly more than zero.
Phones with WCDMA ROM are designed for 3G communication, which is widespread throughout the world. However, there are some varieties like WCDMA HK, WCDMA Singapore, WCDMA Taiwan, WCDMA Malaysia, which also will not work outside of these countries.


Full ROM
It is also “Full Firmware Package”. This is the complete firmware file, which is usually used when installing software from scratch or for the first time.
Also, installing the firmware by downloading the full package often helps to fix some errors that were previously in the device. The full version of the firmware includes all applications and services, even those that have not changed in the update.
Typically, a full service pack weighs from 600 MB to 2 GB.


Incremental rom
It is also “OTA update”, “Obnova”. Includes only new files, as well as updates, fixes and additions.
Usually this is the update that comes to the device via OTA (over the air). Such updates, as a rule, do not have significant and weigh from 20 MB to 200 MB.
Thus, that the Developer firmware, the Stable firmware, you get as an OTA update, and if you want, you can download the full firmware package in the standard Updater application of your device.
Official (global, English-Chinese / weekly, stable) firmware updates are always updated over the air with the exception of improper installation or any other incorrect user actions that could damage system files.
In case your official firmware does not want to be updated, you need to install the firmware in manual mode. You can download official builds from the MIUI forum or the topic of your device.
Custom firmware for the most part are not updated over the air, and require manual installation. In the event that your bootloader is correctly unlocked, some custom builds will receive updates over the air, if provided.

And, the main thing. Firmware update occurs only within one assembly. That is, you will not be able to upgrade over the air to a stable firmware if you have weekly installed and vice versa. But in some cases you can switch from weekly to stable and vice versa.
To do this, see the instructions in the subject of your device.


Recovery ROM
This is the firmware that is flashed using stock / custom Recovery (extension (img). To flash this firmware, you need to put the firmware archive into the root of the internal memory of the smartphone, then boot into the recovery and select the "firmware to be archived".
When installing the Recovery ROM firmware, your personal data and files in the storage will remain intact (if you do not do Wipe- (cleaning) unnecessary partitions))
About wipes, more here.


Fastboot rom
This is the firmware that needs to be flashed with the help of special. programs and computer.
For the firmware, you need to use the MiFlash Tool program and the firmware for Fastboot (extension (tgz)).

Add this post to the cap!


--------------------
Xiaomi Redmi Note 5 3/32Installed Masik X 1.6
bullik01
Message#25
11.03.18, 00:18
Teamsavagemessiahzine.com
*********
[offline]

Group: Curators
Messages 6838
Check in: 31.07.12
Oneplus 5T 8/128

Reputation:-  2246  +

RechtsAnwalt
Message#26
11.03.18, 00:27
MEIN HERZ BRENNT ...
*********
[offline]

Group: Honorary Gameday
Messages 3670
Check in: 02.10.10

Reputation:-  1848  +

M
bullik01appointed curator of the topic.


--------------------
Die Würde des Menschen ist unantastbar!
bullik01
Message#27
11.03.18, 18:10
Teamsavagemessiahzine.com
*********
[offline]

Group: Curators
Messages 6838
Check in: 31.07.12
Oneplus 5T 8/128

Reputation:-  2246  +

V9.2.5.0.NEIMIEK(Android 7.1) → Incremental OTA Update [9.2.4.0 → 9.2.5.0] →Link

V9.2.5.0.NEIMIEK(Android 7.1) → Full ROM →Link


--------------------
Camerado
Message#28
13.03.18, 15:00
Mark Knopfler fan
*********
[online]

Group: Friendssavagemessiahzine.com
Messages 9929
Check in: 07.12.12
Xiaomi Mi Max 3 4/64

Reputation:-  4055  +

Set of firmware and instructions for Redmi Note 5 China / Global (whyred)

All instructions are written under the officially unlocked bootloader!

Utilities and applications
savagemessiahzine.com | Platform-tools (adb / fastboot) | r.28.0.2 | Windows
savagemessiahzine.com | Platform-tools (adb / fastboot) | r.23.1.0 | Windows- XP support

Hashtab file checksum utility
Firmware
Official
Global
Firmware with pre-installed GApps. Of the languages ​​- Chinese, English, Russian, Ukrainian, and many bourgeois.

Firmware on the official website
Stable firmware
Weekly firmware
Russia
Firmware with pre-installed GApps. Of the languages ​​- Chinese, English, Russian, Ukrainian, and many bourgeois. The main difference from Global is the pre-installed software for the local market (Yandex, etc.) and more rare updates.

Firmware on the official website
Stable firmware
China
Firmware with pre-installed Chinese applications and services. Of the languages ​​- Chinese and English, no Russian.

Firmware on the official website
Stable firmware
Weekly firmware

Build based on official
xiaomi.eu
mi-globe
"Constructor" based on xiaomi.eu assemblies.

Select the required parameters in the Expert Settings section and clickCreate ROM

Firmware on the project website
MiRum
Masik ™
Minovo
malchik-solnce
Details about the assembly can be read in the author's Telegram-channel.

Yandex | 9.4.25 | 10 | 9| TWRP
Yandex | 9.4.18 | 10 | 9| TWRP
Revolution OS

1. List of official firmware indexes
Global

9.2.13.0 | 9.5.6.0 | 9.5.13.0 | 9.5.14.0 | 9.5.17.0 | 9.5.19.0 | 9.6.4.0 | 10.0.1.0 | 10.0.2.0 | 10.0.4.0 | 10.0.6.0 | 10.2.1.0 | 10.2.2.0

Russia

9.5.27.0

China

9.5.4.0 | 9.5.12.0 | 9.5.14.0 | 9.5.16.0 | 9.5.21.0 | 9.5.22.0 | 9.6.3.0 | 9.6.4.0 | 10.0.2.0 | 10.2.2.0 | 10.3.4.0

Not official

Containing more than 4 digits in the index and different from the official: 9.2.6.0.0, 9.2.15.10, 93.0.0.0, etc.

Which digital index is between official, but does not coincide with them: 9.2.0.0, 9.2.8.0, etc.

The letter index of which is different from OEIMIxx, OEIRUxx and OEICNxx
2. Check loader status
1.SwingingPlatform-tools (adb / fastboot)(spoilerUtilities and applications) and unpack the contents of the archive into an empty folder on your PC / laptop
2.We transfer the smartphone to the modefastboot(turn off, hold down the power and volume buttons minus, after the vibration release the power button and wait for the picture with the hare to appear). We connect it to a PC / laptop
3.In the file folderadb / fastbootwe clampShiftand by pressingright mouse buttonchooseOpen command window
Screenshot
Attached Image

4.In the console window that opens, sequentially type the commands
fastboot devices
fastboot oem device-info

Screenshot
Attached Image

If afastbootgives outDevice unlocked:true- loaderunlocked
If afastbootgives outDevice unlocked:false- loaderblocked by
3. Smartphone firmware
3.1. fastboot
1.SwingingPlatform-tools (adb / fastboot)(spoilerUtilities and applications) and unpack the contents of the archive into an empty folder on your PC / laptop. It is recommended to create a folder in the root of the local disk and specify a simple name (for example, 111)
2.Downloading firmware (spoilerFirmwareversion forfastboot) and unpack the folder with filesadb / fastboot. Unpack necessary so that the list of files in the folderaboutmatched the screenshot below (the number of files may differ in the end, depending on the firmware version):
Screenshot
Attached Image

3.We transfer the smartphone to the modefastboot(turn off, hold down the power and volume buttons minus, after the vibration release the power button and wait for the picture with the hare to appear). We connect it to a PC / laptop
4.In the file folderadb / fastbootrunflash_all.bat

You cannot use the flash_all_lock.bat batch file ("flash and lock the bootloader") when installing the official (Global / Russia) firmware on the Chinese version of the smartphone
You can use the flash_all_lock.bat batch file ("flash and lock the bootloader") when switching from the official (Russia) firmware to the official (Global)
If after starting flash_all.bat the console window opened and immediately closed
We start the console through Win + R (in the opened window type cmd)
Go to the file folderadb / fastboot
cd folder path

Drag the batch file to the console window and press Enter

5.Wait for the reboot and disconnect the smartphone
4. Install / Update TWRP
4.1. Installation
4.1.1. fastboot
1.SwingingPlatform-tools (adb / fastboot)(spoilerUtilities and applications) and unpack the contents of the archive into an empty folder on your PC / laptop. It is recommended to create a folder in the root of the local disk and specify a simple name (for example, 111)
2.Swingingarchiveand unpack its contents in the folder with the filesadb / fastboot
3.We transfer the smartphone to the modefastboot(turn off, hold down the power and volume buttons minus, after the vibration release the power button and wait for the picture with the hare to appear). We connect it to a PC / laptop
4.In the file folderadb / fastbootrunflash_twrp.batand wait for the launch of TWRP

We allow to modify the System if it is asked about this when launching TWRP!

5.Wipe ➞ Format Data (confirm formatting by enteringyes). Reboot ➞ Recovery
If at this stage the smartphone hangs on the Mi logo
Clamping the power and volume buttons plus
After the vibration, release the power button and wait for the launch of TWRP

6.Copy to the root of the internal memory (for the convenience of searching in TWRP)twrp.imgandDm-Verity & ForceEncrypt Disablerand disconnect the smartphone
7.Install ➞ choose Dm-Verity & ForceEncrypt Disabler ➞ install
8.InstallInstall Image➞ chooseTWRP image➞ sectionRecovery➞ install
9.Reboot ➞ System
4.2. Update
4.2.1. fastboot
TWRP update viafastbootno different from the installation. Just rename the desired image totwrp.imgand move it with the replacement in the folder with the filesadb / fastboot
4.2.2. TWRP
1.We connect the smartphone to the PC / laptop, copy to the root of the MicroSD / internal memory (for the convenience of searching in TWRP) the desired image and disconnect it. Or download this image directly via smartphone
We translate the smartphone in TWRP
Turn off
Clamping the power and volume buttons plus
After the vibration, release the power button and wait for the launch of TWRP

2.InstallInstall Image➞ choose the image of TWRP ➞ sectionRecovery➞ waiting for the end of the process
3.Reboot ➞ Recovery
If at this stage the smartphone hangs on the Mi logo
Clamping the power and volume buttons plus
After the vibration, release the power button and wait for the launch of TWRP

5. Install / update build based on official
5.1. Installation installation based on the official
It is highly recommended to install the firmware copied to MicroSD / USB Flash in order not to get a smaller amount of free internal memory!

1.Downloading firmware (spoilerFirmware)
2.Check the MD5 firmware after downloading. Perfect for this purpose.Hashtab(tab in the file properties)
3.Install TWRP according to the instructions4.1.1(first 5 points)
4. WipeAdvanced wipe➞ sectionsCache, Data(the remaining sections will be overwritten by the firmware installation script)
5. Reboot ➞ Recovery
If at this stage the smartphone hangs on the Mi logo
Clamping the power and volume buttons plus
After the vibration, release the power button and wait for the launch of TWRP

6.Configure TWRP (language selection, time zone setting, etc.)
7.Copy the firmware to the root of USB Flash and connect via OTG-cable. Either we connect the smartphone to the PC / laptop, copy it to the root of the MicroSD / internal memory (for the convenience of searching in TWRP) and disconnect the smartphone
8.Install ➞ choose firmware ➞ tick on reboot after installation ➞ wait for the end of the process
5.2. Update build based on the official
1.Downloading firmware (spoilerFirmware)
2.Check the MD5 firmware after downloading. Perfect for this purpose.Hashtab(tab in the file properties)
We translate the smartphone in TWRP
Turn off
Clamping the power and volume buttons plus
After the vibration, release the power button and wait for the launch of TWRP

3.Making the necessary wipe (instructions6.2)
4. Reboot ➞ Recovery
If at this stage the smartphone hangs on the Mi logo
Clamping the power and volume buttons plus
After the vibration, release the power button and wait for the launch of TWRP

5.Copy the firmware to the root of USB Flash and connect via OTG-cable. Either we connect the smartphone to the PC / laptop, copy it to the root of the MicroSD / internal memory (for the convenience of searching in TWRP) and disconnect the smartphone
6.Install ➞ choose firmware ➞ tick on reboot after installation ➞ wait for the end of the process
6. Firmware Update
6.1. Official (Global / Russia / China)
When updating via the system updater ("3 points")

Can update

Global (MI) ➞ Global (MI)
Russia (RU) ➞ Russia (RU)
China (CN) China (CN)


Withraisingfirmware version data will be saved
Withloweringfirmware version /transition from stable firmware to developer and vice versaall data will be deleted

All other transitions

In the presence of an unlocked bootloader, via fastboot (more details in the instructions7.1.1and7.2.1)
If there is an unlocked bootloader, through TWRP (more details in the instructions7.1.2and7.2.2)
In the presence of a locked bootloader - through disassembly of the smartphone and test point. Put in this way the official (Global / Russia) firmware on the Chinese version of the smartphonecan't
6.2. Build based on official
Withraisingfirmware versions andassembly from the same team or author: Wipe sectionCache
Withloweringfirmware versions andassembly from the same team or author: Wipe sectionCache
Withraising / lowering / savingfirmware versions andtransition to assembly from another team or author: Wipe sectionsCacheandData
7. Transition from firmware to firmware
7.1. Russia / China ➞ Global
7.1.1. fastboot
Instruction3.1
7.1.2. TWRP
It is highly recommended to install the firmware copied to MicroSD / USB Flash in order not to get a smaller amount of free internal memory!

1.Downloading firmware (spoilerFirmware) andDm-Verity & ForceEncrypt Disabler
2.Check the MD5 firmware after downloading. Perfect for this purpose.Hashtab(tab in the file properties)
3.Install TWRP according to the instructions4.1.1(first 5 points)
4. WipeAdvanced wipe➞ sectionsCache, Data(the remaining sections will be overwritten by the firmware installation script)
5. Reboot ➞ Recovery
If at this stage the smartphone hangs on the Mi logo
Hold the power button and both volume buttons
After the vibration, release the power button and wait for the launch of TWRP

6.Configure TWRP (language selection, time zone setting, etc.)
7.We copy the firmware and Dm-Verity & ForceEncrypt Disabler to the root of the USB Flash and connect via the OTG cable. Either we connect the smartphone to the PC / laptop, copy it to the root of the MicroSD / internal memory (for the convenience of searching in TWRP) and disconnect the smartphone
8.Install ➞ select firmware ➞ add Dm-Verity & ForceEncrypt Disabler to the queue ➞ tick on reboot after installation ➞ wait for the process to finish
7.2. Build based on official ➞ Global
7.2.1. fastboot
Instruction3.1
7.2.2. TWRP
It is highly recommended to install the firmware copied to MicroSD / USB Flash in order not to get a smaller amount of free internal memory!

1.Downloading firmware (spoilerFirmware) andDm-Verity & ForceEncrypt Disabler
2.Check the MD5 firmware after downloading. Perfect for this purpose.Hashtab(tab in the file properties)
We translate the smartphone in TWRP
Turn off
Clamping the power and volume buttons plus
After the vibration, release the power button and wait for the launch of TWRP

3. WipeAdvanced wipe➞ sectionsCache, Data(the remaining sections will be overwritten by the firmware installation script)
4. Reboot ➞ Recovery
If at this stage the smartphone hangs on the Mi logo
Hold the power button and both volume buttons
After the vibration, release the power button and wait for the launch of TWRP

5.Configure TWRP (language selection, time zone setting, etc.)
6.We copy the firmware and Dm-Verity & ForceEncrypt Disabler to the root of the USB Flash and connect via the OTG cable. Either we connect the smartphone to the PC / laptop, copy it to the root of the MicroSD / internal memory (for the convenience of searching in TWRP) and disconnect the smartphone
7.Install ➞ select firmware ➞ add Dm-Verity & ForceEncrypt Disabler to the queue ➞ tick on reboot after installation ➞ wait for the process to finish
7.3. Global / Russia / China ➞ build based on the official
Instruction5.1
8. Install / Uninstall Magisk
8.1. Installation
8.1.1. Official (Global / Russia / China)
1.Install TWRP according to the instructions4.1.1(first 4 points)
2.SwingingMagisk stable or Magisk Beta
3.Copy Magisk to the root of USB Flash and connect via OTG-cable. Either we connect the smartphone to the PC / laptop, copy it to the root MicroSD (for the convenience of searching in TWRP) and disconnect the smartphone
4.Install ➞ choose Magisk ➞ tick on reboot after installation ➞ wait for the end of the process
8.1.2. Builds based on official
1.SwingingMagisk stableorMagisk Beta
2.We connect the smartphone to the PC / laptop, copy it to the root MicroSD / internal memory (for the convenience of searching in TWRP) and disconnect the smartphone. Or download directly via smartphone
3.Install ➞ choose Magisk ➞ tick on reboot after installation ➞ wait for the end of the process
8.1.3. Firmware update with installed Magisk
1.Downloading firmware (spoilerFirmware)
2.Check the MD5 firmware after downloading. Perfect for this purpose.Hashtab(tab in the file properties)
3.SwingingMagisk stable or Magisk Beta
We translate the smartphone in TWRP
Turn off
Clamping the power and volume buttons plus
After the vibration, release the power button and wait for the launch of TWRP

4.Making the necessary wipe (instructions6.2)
5. Reboot ➞ Recovery
If at this stage the smartphone hangs on the Mi logo
Clamping the power and volume buttons plus
After the vibration, release the power button and wait for the launch of TWRP

6.We copy the firmware and Magisk to the root of the USB Flash and connect via the OTG cable. Either we connect the smartphone to the PC / laptop, copy it to the root of the MicroSD / internal memory (for the convenience of searching in TWRP) and disconnect the smartphone
7.Install ➞ select firmware ➞ add to queue Magisk ➞ tick on reboot after installation ➞ wait for the process to finish
8.2. Deletion
1.We connect the smartphone to a PC / laptop and copy it to the root of the MicroSD / internal memory (for the convenience of searching in TWRP)Magisk Uninstaller. Or download directly via smartphone
We translate the smartphone in TWRP
Turn off
Clamping the power and volume buttons plus
After the vibration, release the power button and wait for the launch of TWRP

2.Install ➞ chooseMagisk Uninstaller➞ put a tick on the reboot after installation ➞ waiting for the end of the process
9. Restoring the selection of regions
1.SwingingPlatform-tools (adb / fastboot)(spoilerUtilities and applications) and unpack the contents of the archive into an empty folder on your PC / laptop. It is recommended to create a folder in the root of the local disk and specify a simple name (for example, 111)
2.We swing onreference cust.imgandflash_cust.batand move them to the file folderadb / fastboot
3.We transfer the smartphone to the modefastboot(turn off, hold down the power and volume buttons minus, after the vibration release the power button and wait for the picture with the hare to appear). We connect it to a PC / laptop
4.In the file folderadb / fastbootrunflash_cust.bat

Boot, persist, recovery images from global firmware


Post has been editedCamerado- Yesterday, 17:06
Reason for editing: Updating instructions


--------------------
Xiaomi Mi Max 3, M1804E4A - MIUI 10.3.1.0 xiaomi.eu #Magisk
Apple iPad Air, A1474 - iOS 12.2
We haven't changed since ancient times ...
Silvice
Message#29
14.03.18, 11:07
a guest
*
[offline]

Group: Users
Messages 8
Check in: 18.07.11
Xiaomi Redmi Note 4 3/32

Reputation:-  0  +

Sorry .. mixed up the topic. Please delete the message.

Post has been editedSilvice - 14.03.18, 11:34
ShadyTiger
Message#30
19.03.18, 09:07
Techno geek
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 2123
Check in: 15.12.09

Reputation:-  179  +

Did the guys who own the miracle manage to unlock the bootloader?)

One year later
P.S. I unlocked my first in 5 minutes with a loophole after 2 accounts, the second waited a month, anyway I am glad to be the owner of this miracle and to have one of the first posts in this topic!


Post has been editedShadyTiger - 10.04.19, 19:36


--------------------
4FOREVER
RechtsAnwalt
Message#31
19.03.18, 21:35
MEIN HERZ BRENNT ...
*********
[offline]

Group: Honorary Gameday
Messages 3670
Check in: 02.10.10

Reputation:-  1848  +

M
bullik01removed from the post of curator of the topic.


--------------------
Die Würde des Menschen ist unantastbar!
alex.msk
Message#32
20.03.18, 08:56
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 8594
Check in: 09.04.15
Asus Zenfone Max Pro (M2) ZB631KL

Reputation:-  1560  +

* ShadyTigerand what should have failed to distinguish that? It is unlocked just like on other xiaomi.


--------------------
EvolutionX by alex.msk
Zenfone MaxPro m2
FRust79
Message#33
20.03.18, 18:30
Rw
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 4105
Check in: 06.10.14
Pocophone F1 6/64

Reputation:-  2792  +

Instructions for beginners / beginners to check the bootloader and install custom recovery through fastboot and .....
All instructions in this post for unlocked bootloader
Please do everything as in the instructions, without adding gag, before starting work, before installing the drivers and later, before working with the bootloader, I recommend restarting the computer and smartphone.
Driver installation and connection check
We go to the settings-about the device-tap according to the version of MIUI, until it registers that you became a developer. Further settings-extra-for developers (developer mode) we look to enable factory unlocking and USB debugging
Attached Image
You can also see the bootloader unlock status (the easiest way), sometimes the item may differ slightly, instead ofBootloader status-Unlocked m. Lock open (unlocked) or closed (locked)And even as a precursor of an unlocked bootloader, when the device is loaded before the boot animation, there must be an inscription on the MI iconunlocked
Note, it is desirable to connect the cable from the phone to the computer from the "back" side (from the motherboard side), there are people who have the front side defined in the controller and in the MTP mode, but with commands via fastboot, which we will use below, sends computer mother.
1. We startAttached fileadb.zip(9.26 MB)
and unpack, preferably on the C drive (I call the folder in Latin, without spaces or dashes) I did
So
Attached Image

2. We transfer the phone to fastboot (power button + volume minus, until a hare appears in the earflap with the inscription FASTBOOT) and connect it to the computer.
3. Check (for example, windows 7), go to the Control Panel — all the device manager programs should be
So
Attached Image
, without question marks, if the question mark is downloading driversAttached fileADB + driver + v1.17 + lite.zip(9.04 MB)
depending on your system (32/64)
4. Next we go to the folder with adb and the shift combination + right mouse button
Attached Image
- a window will appear select Open command window (it may not always work the first time) Appear
window
Attached Image

5. To check that our device was defined, we enter a command, for a start
fastboot getvar product
get confirmationproduct: whyredthis is our apparatus, then enter the command
fastboot devices
if the device is determined to appear its number, if not prescribewaiting device
If our device is determined, enter the command
fastboot oem device-info
and get
conclusion
Attached Image
where oppositedevice unlockedworth ittruemeans the bootloader is unlocked iffalseis closed. This command tz. more sure way to check bootloader

Install TWRP
Before you begin the procedure, I propose to get acquainted with the first spoiler instructions. And for starters, a link to the official TWRPhere, twrp is updated here and you can download it here. Informal recoveries can be viewed in the topic header and third-party resources.
Ready auto installer. Download installer from TWRP 3.2.1-2Attached fileInstalTWRP (redmiNote5) .rar(24.67 MB)
, unpack and throw on the C drive (desirable), transfer the phone to Fastboot mode (hold down the power button and the volume minus at the same time, it doesn't matter if it is turned off or on), connect the folder with the installer to the computer and double-click on the Flash_twrp
Attached Image
in the window that opens, select the options, in my case, the installation number 1 and Enter
Attached Image
The installation of TWRP will begin and after a few seconds the device will reboot into TWRP itself.ImportantWhen using official firmware, install a protection script from under TvRPAttached fileno-verity-opt-encrypt.zip(656.89 KB)
orSuperSUorMagiskStarting with android 7.x.x SuperSU, you need to install at least 2.79>>If for some reason you forgot to do this and when you start the system, the device hangs on the MI icon, do not panic, simply reboot into rekoveri (pens / power button + volume plus /) and flash either the script or SU / Magisk. When using TWRP with localized or custom firmware, it is not necessary to flash the script or SU / Magisk specifically.
P.S. For the future, you can download any TWRP, drop it into the folder with the installer, delete the previous one, and rename the new one to twrp
Attached Image
Attached Image
Attached Image

Afterword: Sometimes after installing TWRP, it can request a password (to go to the TWRP menu to tap on a cancel) without thereby releasing it into the internal memory, for this you need to do data formattingfirst three screenshots, but in this case all data is deleted, for this, in order not to lose data, you need to install a script or SU / Magisk, in this case we connect external media to a CD card or flash drive via OTG, select a drive and calmly flash, load into the system and save , after quietly doing data formatting

Deleting passwords / fingerprints (pin graph)
InstructionshereFrom myself I would add a "manual" deletion, it would be good to remember, suddenly there is no possibility to use fix (there is no access to download)

Installing firmware / cleaning, etc. working with TWRP
Not a big preface: If during the use of the firmware, some fixes, kernels were not installed correctly, something was deleted in the system, because of this, errors, glitches, or the device did not boot into the system, etc., download the firmware that You are now on board, for recovery, we throw it into the phone, wipe both caches and flash the firmware, everything should work, except that different modes, custom kernels and other "uluchalki" will be removed to restore the system as you had before. .. without flashing firmware from the top, you need to make a Backup from to d TWRP
For starters, for convenience, we will translate into Russian as in the screenshots
Attached Image

1. Next, before stitching another firmware, we do the cleaning, there are two ways a) Full cleaning with data formatting (for me the best way) Go to section. Cleaning>>Formatting data>>in the line we write YES and a tick as on
here
Attached Image
It is necessary to understand that with this method all data is deleted, so transfer data to another medium in advance (card / OTG / comp)
b) With this method, we do not touch the internal memory (if laziness, if it is not possible to transfer data to another medium), then immediately go to section>>Selective cleaning>>select items / Dalvik / ART Cashe / System / Data / Cashe>>Swipe for cleaning
Attached Image
With this cleaning, I recommend to delete two folders Android and Miui. for this we go to p. Advanced>>Conductor>>sdcard>>Android>>checkmark in the bottom right corner>>Delete>>Swipe to confirm again in>>sdcard>>MIUI>>checkmark in the bottom right corner>>Delete>>Swipe to confirm
2. a) Install the firmware. After the Cleaning procedure, I recommend to reboot into TWRP, then go to p. Installation>>Select the folder where you downloaded our files (in my case, the Download folder, select the Firmware (symbol), if you want to add so-called. Google apps for joint firmware (usually not bundled with custom firmware), then click on Add more zip (you can add up to 10 zip) choose Gapps and Swipe for firmware
Attached Image

b) Update via TWRP. There are two ways to "dirty roll" and update with wipe. When dirty, just go to the folder where our firmware is downloaded, tap it and swipe for the firmware, the second way, before updating, go to Cleanup and select as in the screenshot
Attached Image
After we go to the folder where our firmware is taped and if it was installed for example supersu We add another zip and select the file supersu (This is done because with the wipe the cache will fly off everything that was added by the mods not embedded in the firmware)
In the same way we can, through TWRP, separately to the firmware, you can sew mods, fixes, etc.
In case you did not backup the firmware and thanks to fashion, fix, etc. the phone does not boot (often hangs on the MI logo), you can artificially reboot into rekoveri (power button + volume plus, to the victorious "), make wipe cache and flash our firmware with a new one, in this case 99% of the firmware will safely boot, thus avoiding data loss

Installing the drain via Fastboot
1. Preparation: lookfirst spoilerthe instructions are complete, i.e. prepare adb folderAttached fileadb.zip(9.26 MB)
check bootloader and drivers
2. Download the official firmware, look herehereScroll through to our device, at the moment there is no, how to appear, I will add.
3. Unpack (double unpack) and transfer files from the unpacked folder to the folder with ADB, should look like
So
Attached Image

4. We transfer the device to fastboot mode (power buttons + volume minus, until a hare appears in the earflap), connect it to the computer, and press
Attached Image
where we choose one of three batch file:
Green-firmware install cleanly, tz "plant" all data is deleted the system and the data is reformatted, the bootloader will remain open
Blue- System partition is reinstalled as a “factory”, but user data will not be erased (photos, game applications, etc.),
the bootloader will accordingly remain open

Red - firmware install on clean, tz. "plant" all data is deleted system and data is reformatted, bootloaderCLOSED / LOCKED.
P.S. There are various circumstances when you need to flash the device via fastboot, I’m doing it on the "old memory" periodically in order to "reset" the phone, sometimes there are glitches that can only help with firmware via fastboot.

Return to stock with OTA without data loss
For those who want to return OTA after flashing custom SU / Magisk recovery
My example, I flashed the developer (it is possible and stable), but in order not to lose data, from the previous firmware or from another phone, I patched the custom recovery, then I patched SuperSU, I restored the application data using Titanium backup. Further..
1. We delete the rights, if SuperSU is worth, then we are flashingAttached fileuninstallSU.zip(4.74 KB)
from under TWRP, if Magisk is installed then take removal fixhere
2. From TWRP we boot into Fastboot, connect it to the computer, go to the folder with the firmware, which for fastboot / Miflash>>images folder we find the recovery file there, copy it to the folder with the firmware or to the folder with adb.
Attached Image
Attached Image
Attached Image

3. From under the folder where you copied the recovery with a combination of Shift buttons + right mouse button - open the command window and prescribe
fastboot flash recovery recovery.img
We press Enter, it is stitched to the stock recovery, we check it, we boot into the system, after that we can safely flash the OTA with an automatic machine without fear of getting a bootlap.
Note: if you deleted the system apk or other files, before returning to the stock condition, I highly recommend wiping both caches and flashing the firmware that you currently have, naturally, the firmware is needed for recovering with the zip ending.

Backup via TWRP
Create backup. Boot into TWRP>>Backup>>We select partitions for backup (I do only those that are ticked by me, you can do a full one), you can immediately choose a drive where the backup will be made>>Svayp for a start, now you need patience until a backup is made.
Attached Image
Attached Image
Attached Image
Attached Image

Recovery.Before restoring, I recommend transferring the backup to a card or to another medium, then do ashereorherein the second case, respectively, the backup will remain in the internal memory of the phone. Next n. Recovery>>The choice of backup, their m. several, each one contains the date and name of the firmware, immediately the choice of media from where the backup will be restored>>Selection of sections>>Swipe for recovery.
Attached Image
Attached Image
Attached Image


If there are errors, glitches and other delights, reinstalling TvRP and firmware does not help, I recommend "resetting" the phone with the firmware of the drain via fastboot, followed by, if necessary, installing TvRP and local / custom firmware.
If you find flaws or errors, please write to koumiss.

Post has been editedfayzrus - 29.06.18, 14:39
Reason for editing: In the header


--------------------
All that I write is my personal opinion, that is, it strenuously confirms that this opinion is mine as an author and it is not connected with official or other interpretation.
alex.msk
Message#34
20.03.18, 20:58
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 8594
Check in: 09.04.15
Asus Zenfone Max Pro (M2) ZB631KL

Reputation:-  1560  +

MIUI_V9.5.4.0 China- 8.1.0_Oreo


Log
1- o rom
2- better camera.
3- support QC charging.
4- support more bands
5_Dual 4G
6-RN5 support full display features
Flash in fastboot method
Noted unlock bootloader needs

Link: Download
proof
Attached Image

P.S firmware for fastboot, respectively, you need to unlock to start, and then sew

Post has been editedbrant34 - 20.03.18, 21:50
Reason for editing: In the header


--------------------
EvolutionX by alex.msk
Zenfone MaxPro m2
alex.msk
Message#35
20.03.18, 21:20
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 8594
Check in: 09.04.15
Asus Zenfone Max Pro (M2) ZB631KL

Reputation:-  1560    +

TWRP-3.2.1.0 whyred

fastboot flash recovery twrp-3.2.1-0-whyred.img

Attached Image

Attached filetwrp-3.2.1-0-whyred.img(56.52 MB)


Post has been editedbrant34 - 20.03.18, 21:52
Reason for editing: In the header


--------------------
EvolutionX by alex.msk
Zenfone MaxPro m2
bullik01
Message#36
21.03.18, 00:57
Teamsavagemessiahzine.com
*********
[offline]

Group: Curators
Messages 6838
Check in: 31.07.12
Oneplus 5T 8/128

Reputation:-  2246  +

* Alex.volk.1993What is the difference between this recovery and that published in the second post?

Post has been editedbullik01 - 21.03.18, 00:57


--------------------
alex.msk
Message#37
21.03.18, 08:37
Guru
*********
[offline]

Group: Friendssavagemessiahzine.com
Messages 8594
Check in: 09.04.15
Asus Zenfone Max Pro (M2) ZB631KL

Reputation:-  1560  +

* bullik01another collector


--------------------
EvolutionX by alex.msk
Zenfone MaxPro m2
chilvov
Message#38
21.03.18, 23:29
Old resident
*******
[offline]

Group: Friendssavagemessiahzine.com
Messages 794
Check in: 15.03.14
ZTE Nubia M2 NX551J

Reputation:-  68  +

What do you think, how much the unlock counter will be?
Camerado
Message#39
21.03.18, 23:31
Mark Knopfler fan
*********
[online]

Group: Friendssavagemessiahzine.com
Messages 9929
Check in: 07.12.12
Xiaomi Mi Max 3 4/64

Reputation:-  4055  +

* chilvov
15 days, standard.


--------------------
Xiaomi Mi Max 3, M1804E4A - MIUI 10.3.1.0 xiaomi.eu #Magisk
Apple iPad Air, A1474 - iOS 12.2
We haven't changed since ancient times ...
pzhargalov
Message#40
23.03.18, 12:07
a guest
*
[offline]

Group: Users
Messages 6
Check in: 10.10.12

Reputation:-  1  +

Now I am in China, I ordered Redmi Note 5 on the 20th, today he came to me. It has firmware for China (yes?), I just can not understand how it can be reflashed into Russian, for the first time I come across MIUI. As I understand it, you need to unlock it, install the global firmware? Please tell me how to do it correctly, I don’t want to turn a new phone into a brick on the very first day of use ...
Camerado
Message#41
23.03.18, 12:46
Mark Knopfler fan
*********
[online]

Group: Friendssavagemessiahzine.com
Messages 9929
Check in: 07.12.12
Xiaomi Mi Max 3 4/64

Reputation:-  4055  +

* pzhargalovIn private messages look.


--------------------
Xiaomi Mi Max 3, M1804E4A - MIUI 10.3.1.0 xiaomi.eu #Magisk
Apple iPad Air, A1474 - iOS 12.2
We haven't changed since ancient times ...
Xiaomi
 

860 pagesV  < 1 2 3 4 5 6 > » 


 mobile version    Now: 04/29/19 15:18