Instructions on how to RASKIRPICHIT phones after upgrading to 9 android.
- Disassemble the phone, or rather remove the back cover
- Disconnect the battery by removing the two bolt and removing plaque.
- Download the firmware for Chinese fastbut,egAnd replace it in two filesfrom here. Files to replace in the images folder.
then take miflesh of linksby Dima
. or trythis
Miflesh Open, and select the firmware files which have changed.
Now the phone PROPOSITION NO contacts, and connect the phone to a computer. Miflesh see the phone as a com port. Press start. Everything.
after it is necessary tounlock bootloader
. And to flash on globalku. Can and ninth android. Brick will not. If you have the Developer menu says,that it is already unlocked, and you can not bind Account
Upgrade the OTA until the ninth android. Then you can link your account.
can not receive hello packet - close the EML, and break them on the firmware
Tag and Sig ....- if everything was done according to the instructions, it requires a service account.
It can also help another versionmiflesha
Sometimes it helps to turn on the phone
You are not authorised to download- same as the error slightly higher
If none of this helps (and it happens), then look for a person with a service account. There is no other way.
Post has been editedvitautasres - 14.07.19, 18:58
Unlock the boot loader and want to flash on globalku
.Skachay it.ADB and fastbut
, Extract with disc: / folder and the rename resulting in tools. Then download and unzip the firmware global. All files and images in a folder, move the folder tools, which was created before. Set your phone to fastbut: turn off the phone Press and hold the volume down. Press the power button and hold it until the vibration. Let go of the power button. On the screen appeared a hare with a paunch. Release the volume button.
Connect your phone to a computer and follow the flash_all.bat folder tools.
If flash_all.bat immediately closed, then open a command prompt. (CMD), write cd c: \ tools \, you press enter. Write flash_all.bat you press enter. Wait until the end firmware.
Reason for editing: Added a link to miflesh. Updated reference to ADB