[X]Assistant

[gorets2]

Highscreen Boost 3 SE / Boost 3 SE PRO - Firmware
Boost 3 SE / Boost 3 SE Pro
Description | Discussion пїЅ | Music пїЅ | Firmware пїЅ

Information is a must-read.

I strongly recommend reading the topic header, and if there is no answer, you can safely ask questions.

I also strongly recommend that you make a backup before any manipulations. It is easier to recover from a backup than to restore the firmware, nvram and stuff!

A little about the behavior in the topic

If you do not have a SE model, then you are in this topic -Highscreen Boost 3 / Boost 3 pro

Firmwares are suitable (most, exception - firmware with 5 android - do not fit on CE devices at all), but there will be glitches / bugs or they will not start at all. There are cases where the firmware fit almost perfectly, but this is more luck than compatibility, respectively, we are talking about custom firmware. Therefore, I advise you to put on your model.

How to find out SE or not ...

Drivers and Utilities

Before installing drivers on Windows 10, I recommend disabling driver signature verification.
Drivers
alternativeSP_Drivers.rar(8.27 MB)

FlashTool 3 Firmware Utility
SP_Flash_Tool_exe_Windows_v5.1628.00.000.rar(30.87 MB)

General topic on flashtool onsavagemessiahzine.com
Flashlight specials versions

Firmware

Official firmware (for installation via flash)

Factory firmware L002 Highscreen Boost 3 SE
Factory firmware L002 Highscreen Boost 3 SE Pro
Official firmware L005 - L007
Of Flash Tool Firmware
Of firmware BF167_BOOST3-SE-PRO_L008
Of L008 firmware on Ya.Disk
All firmware from L002 - L008
Official firmware L010 for BOOST 3 SE, PRO SE

BF166 C324 firmwarehanuma50's post | i.disk user dm789011 | i.disk user gorets2

Unofficial firmware (for installation through recovery)

Stock firmware BF167 L010 for Boost 3 SE PRO
LineageOS 13.0 by Decker for Highscreen Boost 3 Pro SE
РЎrDroidAndroid-7.1.2
MIUI 10 (test. From the topic of simple boost)
MIUI 9
MIUI 8 for Boost 3 SE (not pro)
Styled Oreo firmware (6.0)

Custom recovery

TWRP Recovery 3.1.0-0
TWRP Recovery 3.1.1
CWM Recovery (experimental)
Philz Recovery (experimental)

Root

struggle with the root for Sberbank Online- 4pd theme
installing root using FlashTool
a similar way to get root on the example of firmware L007

Instructions

If drivers are not installed on Windows 10

go to options>update>recovery>special download options reboot, the boot screen will pop up, go to the recovery options and boot up with the driver signature off (press 7 or f7). Boot into Windows and calmly install any drivers. after the next reboot, this function crashes and you have to do it all over again.

NWRAM Recovery
How to change pixel density (DPI)
troubleshooting NVRAM err 10 and 0x02 errors
Instructions for configuring Highscreen Boost III SE Pro under Windows 10.
INSTRUCTIONS FOR DELETING "GAPPS"(along with the rest of the trash) AND TRANSITION TO THE ALTERNATIVE - "microG GmsCore is a FLOSS framework"

miscellanea

Auto-turn on the phone when charging is connected [linux]
Change screen saver on / off, as well as their melodies [Root]
Turn off notifications
Remove and restore google
Reassigning physical buttons(Xposed + Root)
Disabling the camera button (from spontaneous clicks)
Brick restoration, just a couple of tipshereandhere
Topic by Xposed onsavagemessiahzine.com
The way not to turn off the screen when charging is connected
Who does not have a touchscreen (sensor) after replacing the module

In the subject there is no curator and in the near future will not. For filling caps, please contactQMSauthor's topics.

Post has been editedgorets2 - 08.04.19, 06:55

Reason for editing: Editing header

[gorets2]

dm789011, did you try to install supersu? And in general, you look at the topic of ordinary boost, and here is the SE option. You are either there, or here take the information and ask. And then you take it, then you ask. It's like buying a computer, breaking it down, and bringing it to the vet for repairs :) I therefore asked to add a description to those links. Look at my post about meow9.

[dm789011]

gorets2,
Did I ask something? Posts on the firmware and the author normally decorated. And I have two Boots both se, one is now flashed by MuiPro over the stock firmware, and the second is the fifth android from Busta 3 pro, so what topic should I go to. Many firmware are quite versatile.
There is no real information on the difference in the gland between the usual and se version until now, all this difference is more like a PR move. Boost 3 pro se stands alone, alone, but no one has succeeded in putting a fifth android from a non-se version on it.

Post has been editeddm789011 - 06.02.19, 22:38

Reason for editing: added

[velikijzhuk]

Custom for SP Flash Tool

1. I highly recommend making backups of 4 partitions, namely proinfo, nvram (this section can be backed up 10 times and saved wherever possible), protect1, protect2.
2. In all firmware TWRP Recovery 3.1.1.
3. In all firmware Magisk 18.1. and the installer Manager 7.0.0 APK file, you need to install after the firmware, first throwing it on SD.

4. What is what and where:

BF167__6.0__BOOST3-SE-PRO_L010_MAGISK_TWRP.7z - Stock 010 with Magisk and TWRP 3.1.1
Boost_3_Pro_SE__BF167__6.0.1__lineage-13.0.7z -Link to donor for recovery
Highscreen_Boost_3__6.0__MIUI10.7z -Link to donor for recovery
Highscreen__Boost_3_Pro_SE__BF167__РЎrDroidAndroid-7.1.2.7z -Link to donor for recovery

Extra_Files.7z - this is for those who first flushes and only then reads point 1
5. All this stuff will fall on the non-PRO version.
6. Sew preferably in Download Only, but if not then with the format(memorable about backups).

Download

https://yadi.sk/d/K_2lZSW1J3dNhQ

Post has been editedvelikijzhuk - 07.02.19, 11:48

[gorets2]

dm789011, it means there are differences, I had about the apparatus, and there were some difficulties. Therefore, he created his post, with all the necessary information. It will work fine for you, others may not. If you have two phones, then both need to be checked. You do not check, check the other, and will complain, but it is not, it is not. For this and need a description. If I were a curator, I would design it for you, and so I am only the author of the topic. So, comradely, himself, handles handles :)

[dm789011]

gorets2,
I would love to do it, but I don’t have enough time - everything is on the run, accessible to the PC only in the evening and not every day.

[gorets2]

velikijzhukso, what do we have here ...: hemp:
You took the bike and changed the wheels / parts, and did not repaint the frame? : spiteful:

Making would be better, instead of tyky better write a la "link to the donor" or something like that. Many people will download these firmwares and try to flash them through a flash drive.

More information for those in the tank and for blondes.

And most importantly - the name. There, after all, not all the custom bfs, bf167 is already in the cap, take the tvrp together with it instead of the drain, then go into it and flash the root - and you could not download your firmware. Plus, I already did 167 for the firmware under the recovery, here, in my opinion (not in my opinion, too), the choice falls more on this method.

The whole thing is under spoilers (for example: links to donors, changes / additions / cuts, installation instructions, etc.). To be honest, I didn’t immediately dare to talk about anything at all, looking at the name.

[gorets2]

dm789011Yes, and you can do it from your phone. Not so convenient of course, but you can: D

[dm789011]

[email protected], 09:54

Sewing is desirable in Download Only, but if not then with the format

I want to add that the flashlight has a FirmwareUpgrade mode, here it is best to sew it, if the nrav wipes up with the format and then you cannot do without backups.
p s Yes, I didn’t spill a bit of garbage, TWRP and Magisk are naturally sewn into Download Only.

Post has been editeddm789011 - 07.02.19, 12:54

Reason for editing: p s

[gorets2]

dm789011, he therefore strongly recommends making a backup: D

[Len_Over]

Hello to all. Who can throw off the Google camera. You are welcome

[gorets2]

Len_OverI am not a supporter of Google, to be honest :) but what happened to the camera?

[Len_Over]

gorets2Nothing. Just wanted a google camera

Posted on 03/16/2019, 18:09:

gorets2Can you tell which firmware is the most productive?

[gorets2]

Len_Over, 7 android works a little faster than 6. I will not know how it will be on games (and I don’t have this phone for a long time already). But on 7ke with charging there is a problem (if not corrected yet).

[Len_Over]

gorets2, then it's better to stay on the official 6. I will put Root and TWRP and Xposed. By the way, do not tell me how to put TWRP? Is there a hat in the cap, but is there another way?

[gorets2]

Len_Over, Unfortunately not. In the cap he described why. From the next topic of a simple boost, Albina did something to install from the factory recovery, if there is a desire, find out from her, or, well, I don’t know

And what's the problem put through the computer? There is a deal for 10 minutes

[Len_Over]

How to remove this terrible shutter sound?

[gorets2]

Len_Over, put a silent profile?)

[Len_Over]

gorets2I don’t want to switch it on every time. By the way, another problem. Highscreen has a terribly pull camera. It is just impossible to take a photo of the text There is a solution?

[gorets2]

Len_OverI don’t have this phone anymore, I don’t remember. He has no optical stabilization, only software, and on video. Ask better in the discussion, no one comes here for a long time.

[dm789011]

Good day to all . In the theme of the firmware simple Boost 3, new ported firmware appearedHighscreen Boost 3 / Boost 3 Pro - Firmware (Post Aruskas # 83649861)
I'm currently testing MiuiPro 9.2.14, a fully-fledged firmware. The first thing I would like to note is that this is the first custom on which the battery charges quickly. So you can test and use it. Yes, the sound is correct, not worse than the drain.