[X]Assistant

[-Blue-]

Fly FS517 Cirrus 11 - Firmware
Fly FS517 Cirrus 11
Description | Discussion пїЅ | Firmware пїЅ

Drivers and Utilities

Utilities and drivers
All versions of SPD Flash Tool

Official firmware

Official SW17 - mirror
Official SW08

Unofficial firmware

Based on SW14 stockfromDemon1228

Installation Instructions!

1. Download firmware Rom6.0ROOT.rar
2. Unpack on the PC (you can also on the phone but it will be a long time)
3. Unpacked archives to throw on the phone or USB flash drive
4. Enter TWRP
5. Make wipes
6. Install archive with firmware!
7. How everything is established do Cache, Data, Dalvik Cache wipe
8. We put SuperSU
9. Turn on!

Instructions

Instructions on firmware using ResearchDownload_R4.0.0001_GB

Getting ROOT rights

Fly Cirrus 11 FS517 SW17 firmware update instructions

We get ROOT-Rights with firmware SW17

Brick restoration

Repair IMEI

Useful

TWRP and ROOT on sw25

Building init.d scripts

TWRP Recovery for SW17

TWRP 3.1.1 under SW14

Ad block! Set to TWRP

There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonunder the messages to which you want to add links.

Post has been edited-Blue- - 18.08.18, 11:04

Reason for editing: Repairing IMEI

[arsevka]

yralsib,
Yes, his bootloader is not blocked, only I have lost the touch on SW08
here is for firmware utility and driver

Attached files

UPGRADEDOWNLOAD_R3.16.0201.zip(2.92 MB)
RESEARCHDOWNLOAD_R2.9.9016.zip(4.66 MB)
Spreadtrum-Drivers.7z(21.54 MB)

[lominion]

I decided to write a detailed guide to get ROOT.
You can not use this method if you have firmware larger version than sw14!
For convenience, I collected all the necessary files in one archive.
First you need to install firmware SW08 and install Recovery (all data that is on the phone will be deleted !!)
Installing drivers
Next we need ResearchDownload
Run the ResearchDownload program in the Bin folder
In the window that opens, select Load packet (Gear in the upper left corner)
Choose our firmware in PAC format
We are waiting until it is loaded, click Settings (button with two gears)
A window opens, select the recovery item, double-click on the path and select our recovery
Click Start downloading (arrow next to the stop button)
We take our device, turn off, hold down the volume button, then connect via USB
The firmware has gone, we wait until Passed appears
Press the stop button, turn off the phone, remove the battery and insert it back)
We turn on the phone (I had a very long launch), here we have firmware SW08 and TWRP
And so we get Root, we throw the UPDATE-SuperSU archive on the USB flash drive and go to recovery.
How to get recovery? (Turn off the device, hold down the power key, after a second the volume key is down. When the splash screen appears, release the power key and hold the volume key until TWRP appears)
Select the Installation item, select the USB flash drive as our drive.
Find our archive UPDATE-SuperSU install and reboot the phone

All the files you need
https: //drive.google.c.…1YME1czMEes81CXtkCa01f

Everything that you do - you do at your own peril and risk!

Post has been editedAlexanderL - 30.11.17, 08:45

Reason for editing: In the header

[Timur3407]

Guys! Here are the drivers for this monster, maybe someone may need it!Files.zip(9.61 MB)

[9791625]

***********************************************************************************************

Fly Cirrus 11 FS517 SW17 firmware update instructions

• Install the driverSPRD USB Driver 1.4
  
• Open upUPGRADEDOWNLOAD R3.16.0201
  
• SelectPAC firmware
  
• Click Download
  
• On the phone off, the SOUND DOWN and connect the cable
  
• Expect completion: popcorm:

Fly Factory SPRD USB Driver 1.4[Download / Download]
Fly Factory UPGRADEDOWNLOAD R3.16.0201[Download / Download]
Fly Factory FS517 SW 20170908 SW17[Download / Download]

After downloading, it is recommended to manually make an additional reset.: smoke:

***********************************************************************************************

Post has been editedgrafom - 30.11.17, 18:39

Reason for editing: In the header

[mixxx28]

We get ROOT-Rights with firmware SW17
Attention! I am not responsible for your actions!
The way works ONLY on firmware SW17 !!! If you are lower, then I askRoot for SW08
If anything, I attach screenshots, see them from the end
So, let's begin.
----------------------------
Sew phone
1. Just in case, backup all data to the cloud or somewhere else.
2. Downloadthis archive
3. Unpack in a convenient place for you (preferably in daddy)
4. Install drivers from the drivers folder
5. Turn off the phone, charge it, the charge should be at least 55%
6. Open the SPD_Upgrade_Tool_R4.0.0001 folder.
7. Run the .exe fileResearchdownload
8. Click on the very first gear, follow the path to our files.
9. Choose firmware in .pac format
10.We are waiting until it is loaded, after loading we press on two gears, we are looking forRecovery
11. Click on the path, then on three points, go to our files and select recovery.img (thankslominionper port for firmware SW17), click OK
12. Click on the arrow to the right of the gears, hold the volume down on the phone, connect to USB (if you are from the hospital, I advise USB to plug into the mother's ports (which are behind), waiting for the inscriptionPassed
13. Click Stop (to the right of the arrow), take out the USB, distort the battery (remove and insert), turn on
14. Configure the device, connect to USB, select MTP file transfer
-------------------------
Getting ROOT
15. We discard without unpacking the archive.UPDATE-SuperSU ... to sd card
16. Turn off the phone, hold the power on and after a second the volume down. After the Fly logo appears, release the power and keep the volume down
17. We get to TWRP, click Installation, select the SD card, look for our archive
18. We are waiting for the end and rebuy in the OS
19. You should have a SuperSU prog (if it doesn't exist, either the root has not got up, or you need to download it from GP)
20. To check if our root is up, download from GP "Root checker". We open it, we give permission to the superuser (if this window appears, then the root has risen, but still it is worth checking)
Congratulations, you got ROOT-rights!

Attached images

Post has been editedgrafom - 30.11.17, 20:08

Reason for editing: In the header

[anubis31]

Restoration brick If your next screen saver does not load, the flashing from the header hangs on one of the items, congratulations, the internal memory layout has been damaged. But it is curable.
To start swingfactory.7z(4.89 MB)
andSPD Upgrade Tool R4.0.0001.7z(2.29 MB)

Unpack archives and install drivers from the header.

1. In the bin folder, run fromadministrator nameFactoryDownload file Until the end of the process from the programdo not go out
   
2. Click the gear and select the firmware file
   
3. We are waiting for download
   
4. Push the arrow
   
5. Turn off the phone
   
6. Remove the battery
   
7. Next you need to get ready to do the following 3 steps quickly.
   
8. Hold down the volume -
   
9. Stick usb
   
10. We connect the battery
    
11. Waiting for the green lettering
    
12. Repeat 3 steps. Waiting for system finish
    
13. Close the program.
    
14. We open ResearchDownload from the second archive fromadministrator name
    
15. Click the gear and select the firmware file
    
16. We are waiting for download
    
17. Push the arrow
    
18. Turn off the phone
    
19. Remove the battery
    
20. Next you need to get ready to do the following 3 steps quickly.
    
21. Hold down the volume -
    
22. Stick usb
    
23. We connect the battery
    
24. Wait for finish
    
25. Close the program.
    
26. Remove the battery, and again set
    
27. The first download will take 5-10 minutes, this is normal
    

P.S. The method was tested by me personally. Hour an hour ago the client's phone.You take full responsibility for your actions.

Post has been editedMgalex - 09.02.18, 16:35

Reason for editing: In the header

[-Blue-]

Instructions on how to enter the engineering menu

In the dialer enter: * # * # 83781 # * # *
And shaman: D

Building init.d scripts fromDemon1228

Installation:
Unpack archiveinit.d.zip(5.68 KB)
in system / etc

Post has been editedEvgenyi228 - 25.02.18, 15:33

[-Blue-]

Remove advertising!

If you have Root, then remove the STS application and the ad will disappear!
If there is no Root then go to settings>applications, click in the upper right corner of the three points, select the system applications. We find the STS, click off, click on the "Permissions" and remove the daws where they stand

[amakasoff]

Can SW17 firmware be flooded to the cloud? I can not download ...

M

Section Rules"Android - Firmware"
3.12.It is forbidden to place requests for reloading files from sites, trackers, slow file services to a forum or to any other file sharing service convenient for you. To do this, use a special theme.Perezalete ...

Post has been editedklich007 - 31.03.18, 09:11

[Nudnji]

When the firmware issues this

[lanundefindet]

Nudnji
Today I solved this problem by the method indicated by Eugene above.

[Nudnji]

lanundefindetThe same mistake was on the screen?

Post has been editedNudnji - 16.04.18, 18:20

[lanundefindet]

Nudnji, Yes

[Nudnji]

lanundefindet, did you do it?Fly Cirrus 11 - Official firmware (Post Evgenyi228 # 70742550)

[4ynka]

People tell me I can not put not off firmware SW14 gives error 7 !!! what to do??? worth firmware SW17! thank you in advance

[Nudnji]

4ynkaGenerally, error 7 is an archive error, try to create an archive again.

[-Blue-]

4ynka, download the archive with the firmware. Unpack it to the root of the SD or Internal Memory and put

Posted on 04/18/2018 20:48:

4ynka, Fly Cirrus 11 - Official firmware (Post Evgenyi228 # 70741448)

[David_Black]

AntonAS @ 04/18/18, 23:04

Please reset new

Latest versionandunbrick.zip(8.29 MB)


All versions of SPD Flash Tool

Post has been editedMgalex - 19.04.18, 13:49

Reason for editing: In the header

[quatrox7m]

There was such a device, hung on the screen saver, stuck with the firmware. After restoring according to the instructions that I found in this topic, the device started up, but it was with another imei. (By the way, sw17 was sewn) Since the percents of spreadtrum sc9832 helped meinstructionFrom this branch, there is also a MobileTester program. (It works only on the stock recovery) Thanks haker88.

Post has been editedquatrox7m - 19.04.18, 13:03

[-Blue-]

quatrox7m, happy for you: friends: Another IMEI is not a problem)) if there is a root, you can change it to that Imei which is under the battery