Any modern and not very android Extender does not have enough power (with the exceptionNvidia Shield TV Which is superior in performance to any 2-2.5 consoles released before the year 2019-2020) to serve the torrent server and the client, with a quantity of sources to torrent more than 20-25 !!!
Therefore, do not force their gadgets.
Android TVIt has even less capacity than Extender therefore either reduce the number of sources, or carry serververnuyu part torrserve on Extender or the computer, and the client leave on Android TV.
To view online via Torrserve4K rips, remuksov and blur disks it is desirable to have a Gigabit ethernet channel the provider (i.e., a speed of 100 Mbit / s, no matter what it will PON, WiFi, ethernet importantly, that it could give the stated speed), Gigabit ethernet local area network or a stable WiFi channel in the 5 GHz range (between your router - Extender / TV android). Otherwise, you will receive the output buffering that will stop the content being viewed and resume, if the cache is still extender works properly, but in any case no pleasure from the view you get.
Sample calculations requiredthe speed of your channel Bitrate movie x 2-3, empirical value ~ 150-200 Mbit / s Torrserve optimal settings for android consoles:
- Cache size = 200 MB (megabytes Quantity reserved in RAM for the selected media content Stream)
- Preload buffer size MB = 40 (number of megabytes allocated for the start of the media content)
- Connections per torrent = 20 (The number of persistent connections with a torrent client, that limit is not greater than this target)
- Restriction download speed / impact = 0 (without limitation)
- View the browser to the server (for example,http://192.168.1.10:8090, Ie to the IP address where the server is installed) and changeQuantity DHT compounds from 500 to 0, i.e., without limitation, to go faster search seeders / peers.
Test WAN link load speed when browsing online torrent 4K media
medaipleer - Nvidia Shield TV 2017
player - ViMu v.7.20 (buffer 100 MB)
http torrent - Torrserve v1.1.71 client / server 1.1.70 (200/40/20/0)
router - Keenetic Giga KN-1010
Quality: Blu-Ray Remux (2160p)
Video: HEVC, 49563 Kbit / s, 3840x2160
Audio:Russian (AC3, 6 ch, 640 kbit / s)
, (AC3, 2 ch, 192 kbit / s), English (TrueHD, 8 ch, 5376 kbit / s), (AC3, 6 ch, 640 kbit / s)
Size: 44.58 GB
Record network monitoring. On the first peak in the 15 Mbit / s do not pay attention.Bumblebee_traffic.avi(418.37 KB)
Recording started from the moment the search seeders / 300 (a small traffic of up to 500 kbit / s, about 20 times) and the beginning of the film. After the appearance of the film's title ~ 4 min. 05 (taymlaps video or 3 min 25 sec movie itself) Rewind 40 minutes + some time to load ~ 6 c, and to stop the movie.
As can be seen the monitoring network is loaded is always greater than 100 Mbit / s, over time (speech of dynamic scenes in the film when the bitrate increases) all 150 Mbit / s
As for remuksov in 1080p - the picture is similar: start about 150 Mbit / s, and then decline to 77 Mbit / s, where little of the dynamics of 35-40 Mbit / s
Channel 100 Mb / s from the router to the ISP is sufficient for this type of content.Post has been editedThoughts - 27.04.19, 16:30