[X]Assistant

[nobel77nobel77]

DiscussionMagicsee C300Pro and C300, with DVB-S2
DVB-S2 / T2 TV Box on Amlogic S912
Discussion пїЅ

• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
  
• Before posting photos, read the topic Working with Images on the forum
  
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

A photo

Specifications

C300

C300 Manufacturer: Magicsee Operating system: Android 7.1.2
Processor: Amlogic S905D
Video Accelerator: ARM Mali-Mali-450MP.
RAM: 2 GB DDR3.
Memory: 16 GB
Support for micro SD.WiFi memory cards: IEEE 802.11 b / g / n / ac 2.4G
Bluetooth 4.0.
Ethernet: 10 / 100M. Support for video resolution: 4Kx2K 60fps.
Support for HDR10 and HLG HDR.
Video decoding: H.265 4K 60fps 10bits, VP9 Profile 2, H.264 4K 30fps, AVS + 1080P 60fps, etc.
Video Support: HD MPEG1 / 2/4, H.265 / HEVC, HD AVC / VC-1, RM / RMVB, XVID, RealVideo8 / 9/10, AVI / TS / VOB / MKV / MOV / ISO / WMV / ASF / FLV / DAT / MPG / MPEG, etc.
Audio: WMA / AAC / WAV / OGG / DDP / TrueHD / HD / FLAC / APE, etc.
Photo: HD JPEG / BMP / GIF / PNG / TIFF et al. DVB-T2 standard: ETSIEN 302 755.
MPLP support.
Demodulation: QPSK, 16QAM, 64QAM or 256QAM.
DVB-S2 standard: ETS 302 307
Symbol rates: QPSK, 8PSK.
DVB-C standard: ETSI EN300 429 v1.2.1
Demodulation: 16/32/64/128 / 256QAM. Ports:
1 * HDMI 2.0 (4Kx2K 60Hz, HDTV2.0, HDCP2.2)
1 * AV.
1 * LAN.
1 * SPDIF.
1 * DVB-T2 / C.
1 * DVB-S2.
1 * micro SD card slot.
4 * USB 2.0.
1 * Power Port. Included:
1 * TV set-top box.
1 * IR remote control.
1 * HDMI cable.
1 * power supply.
1 * Brief instruction in English.

C300pro

Characteristics C300Pro
General
Brand Name: Magicsee
Model: C300 PRO
Type: TV Box
Black colour

Hardware
Operating system: Android 7.1
Processor: Amlogic S912 Octa-Croe ARM Cortex-A53 1.5Ghz
GPU: ARM Mali-T820MP3
RAM: 2GB
ROM: 16GB

connection
WiFi: Built-in 2.4G / 5G WiFi IEEE 802.11 b / g / n / ac
Blutooth: Bluetooth 4.0
LAN Ethernet: 10 / 100M
Video
Video Decoder: H.265 4K @ 60fps 10btis, VP9 Profile 2, H.264 4K @ 30fps, AVS + 1080P @ 60fps
Video encoder: H.264 1080P @ 60fps
HDR: HDR10 & HLG
Decoder Format: HD MPEG1 / 2/4, H.265 / HEVC, HD AVC / VC-1, RM / RMVB, Xvid, RealVideo8 / 9/10
Media Format: Avi / Rm / Rmvb / Ts / Vob / Mkv / Mov / ISO / wmv / asf / flv / dat / mpg / mpeg
Music Format: WMA / AAC / WAV / OGG / DDP / TrueHD / HD / FLAC / APE
Photo Format: HD JPEG / BMP / GIF / PNG / TIFF

DVB-S2 / S System standard DVB-S2: ETS 302 307
Character Values: QPSK, 8PSK
Speed ​​of direct error correction 1/4, 1/3, 2/5, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
Carrier Frequency Range: В± 5MHz for symbol rates above 3 Msps and В± 3MHz for remaining symbol rates
Rollover Factors for Pulse Generation: 0.2, 0.25 and 0.35
Character Values: 1-55 Msps
Code rates: 1/2, 2/3, 3/4, 5/6, 7/8
Input Level: -84 dBm to 0 dBm (average power)
ANT. connector: IEC TYPE F
DVB-T2 / T System standard DVB-T2: ETSIEN 302 755
MPLP support
Demodulation: QPSK, 16QAM, 64QAM or 256QAM
Speed ​​of direct error correction 1/2, 2/3, 3/4, 3/5, 5/6
Guard interval: 1/4, 19/256, 1/8, 19/128, 1/16, 1/32, 1/128
Bandwith: 6/7 / 8MHz
Input Range: 54-860MHz Input Impedance: 75 О©
Input Level: -84 dBm to 0 dBm (average power)
ANT. connector: IEC TYPE, female
DVB C System Standard DVB C: ETSI EN300 429 v1.2.1
Demodulation: 16/32/64/128 / 256QAM
Input Frang Range: 48-860HMz Input Impedance: 75О©
Input Level: -48 dBm to 0 dBm (average power)
ANT Connector: F TYPE, Loop Output: F TYPE
HDTV 2.0 Interface: 4K / 2K HDTV2.0, HDCP2.2
2 * USB HOST: 2 * High Speed ​​USB 2.0, support U DISK and USB HDD
1 * TF CARD: Micro TF card (maximum support 32GB)
1 * AV: CVBS and L / R output
1 * SPDIF: digital audio output
1 * RJ45: 10 / 100M BaseT
1 * DC IN: 12V / 1A DC adapter
Other features Network function: Miracast, Airplay, Skype chatting, Picasa, Youtube, Flicker, Facebook, online movies, etc.
Language: Chinese, English, German, Japanese, Korean, etc. Languages ​​24
power 12V / 1A Power ON: blue; Standby: Red
Package Contents 1 x TV Box
1 x IR Remote
1 x HDTV cable
1 x Power adapter (right AC adapter will be sent as shipping country)
1 x User Manual

Reviews

Magicsee C300 with Android7http: // hd-mediaplayers ... agicsee-c300-review / # 1

Overview of Magicsee C300 with Android 6

http://www.taker.im/re...ir-vse-eto-Magicsee-C3

Useful

Entering Sharing settings on Android 7https://youtu.be/6CLjalgsCWQ

Model on the page of the leader

http: //www.magicsees.c....=13&Id=189&FId=t3: 13: 3

Firmware

Firmware from seller for C300pro
Firmware from seller for C300 in yellow box

Custom firmware

Firmware from Malaysk for C300pro
Firmware from Malaysk for C300

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.
If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).

Post has been editednobel77nobel77 - 09.04.18, 14:57

Reason for editing: firmware

[Marina175]

Good day!
I have a C300 on Android 6.0.1
A profile with limited access was created in the settings. Now I can not go to the main Owner profile. There is no Users section in the settings.
Help, please, how to change the user?

[Flox80]

For firmware everywhere they write that after pressing a hidden button in the AV connector with a toothpick, connecting a USB cable, establishing a connection with software, you need to insert the power cable. When disconnecting the power, I always disconnect, so I was flashing it without connecting the power cable. Already 2 times .. And everything was OK.

[nobel77nobel77]

I have problems setting channels from 36 degrees. Does not scan all channels. I start scanning in manual mode. Those found first stop working. They write no signal.

LNB Settings

If someone is watching from 36 degrees, discard the backup of all channels. I'll try to fill it.

Post has been editednobel77nobel77 - 15.02.18, 23:11

[dimkoro]

Good morning!
Are custom firmware from KIII pro suitable for magicsee?

[Flox80]

[email protected], 08:07

Are custom firmware from KIII pro suitable for magicsee?

No, they do not fit (discussed in the profile topic on K)

In terms of price / iron, the Magicsee C300 is a great device. While everything spoils the software part. Competent enthusiasts who would finish the firmware are really required.

Personally, I bought this box to watch cable DVB-C and content from the Internet. So far, the DTV application for viewing the cable is not more comfortable with:
- lack of auto-image format. Now, if you set the Full or 16: 9 setting (when choosing these items, the result is the same), the 4: 3 signal is stretched. And vice versa, when setting in the settings 4: 3 - the 16: 9 signal is pulled out with the addition of black fields above and below;
- there is no autoframe: a picture with a frame rate of 23.296 (foreign TV channels) strobes when xxxp50Hz is set in the image settings, and vice versa - a picture with fps 50 strobes when xxxp60Hz or Auto is set (in this case it will always be 1080p60Hz);
- extremely inconvenient sorting of TV channels in the list - moving a channel is possible only by setting its serial number in the list. With a large number of channels, their sorting eventually turns into flour. Moreover, if you restart the search for channels even at one frequency, the entire previously configured list gets lost. As a result, you have to act like this: take the channel list from the provider, do it sorting in Excel on your computer, print it out and from this list set the channel numbers in DTV
- The quality of the signals from the tuner is, after all, so-so. At least noticeably loses to the tuner built into the TV.

Post has been editedFlox80 - 16.02.18, 12:01

[Flox80]

[email protected], 23:05

I have problems setting channels from 36 degrees. Does not scan all channels.

Perhaps the matter is in the quality of the signal (on foreign resources, they pay attention to the weakness of the DVB-T / T2 tuner for this device)

[nobel77nobel77]

Yes, the fact of the matter is that there is no problem with signal quality. You scan one frequency, the other stops working. I myself am facing the first time. GI 8120 runs on this antenna.
I confirm that the DTV application in 7 android sucks. Some frequencies from 36 degrees are not in the transponder list.

Post has been editednobel77nobel77 - 16.02.18, 18:47

[kotomkin74]

In my installed Andrew 7 I can not find the protocol byss. where did they find him? : drag: help anyone has info!

Post has been editedkotomkin74 - 16.02.18, 20:08

[nobel77nobel77]

I did not find it seems no.

[kotomkin74]

nobel77nobel77,
It can’t be most likely hidden somewhere under the code as well as the train! Yes, that's just where the hell knows! : blush:

[kotomkin74]

[email protected], 20:47

6 andryusha steers

that on andryusha6 byss protocol sits with the balloons is good! but on the 7th where to add keys byss? : wallbash:

[Flox80]

[email protected], 17:47

6 andryusha steers

Is the DTV there, interestingly, as miserable as on 7.1.2?
By the way, I tried my box, which came preinstalled with 7.1.2, to upgrade to the 6th Android - it is flashing without errors, but the tuners do not work - when I launch the same DTV, the error "Cannot detect any demond / tuner"

Interestingly, in all reviews, the devas comes in a black box with a blue MagisSee inscription. My prefix came in a box of plain unpainted cheap yellow cardboard ..

Post has been editedFlox80 - 18.02.18, 19:11

[nobel77nobel77]

I have such a simple box.

New box

Post has been editednobel77nobel77 - 18.02.18, 22:46

[nobel77nobel77]

[email protected], 19:36

Recently translated menus on the seven for magiksi whales. I hope the new firmware will be released soon))

I would rather. I can’t configure all channels ++++.
Where are the list and channel parameters? I want to see what is changing.

[nobel77nobel77]

[email protected], 20:12

I would at this stage change to 6. If it doesn’t work, then all the questions on Skype

So when switching to 6k, DVB will stop working. Therefore, it is hardly worth going over.

[nobel77nobel77]

And what is this protocol?

Gscam

[temamix]

nobel77nobel77 @ 02/18/18, 10:45 PM

transition to 6ku DVB will cease to work.

It looks like you have to identify the revisions of the boards. Ps. I am in some perplexity. Those data in the header for c300 pro. Amlgic 912. Links to c300 reviews, Amlogic 905.
So this topic is still for what box?)) Cardboard box - c300 pro. Multicolored c300

Post has been editedtemamix - 19.02.18, 11:51

[nobel77nobel77]

There are no Pro reviews yet, so I posted the C300 review.

[nobel77nobel77]

I suggest discussing both boxes here because of the little information about both. And there we will divide the branches.

[temamix]

Flox80 @ 02.19.18, 19:47

Other hardware, without DVB-C

There is dvb / s and it works. Only the search is just as wild. But a noticed glitch on hd channels with a weak signal, a freeze picture, it seems to be missing there. But the sss in the initial firmware did not work. And now we are looking for the opportunity to download this firmware. Everything is in the process. Ps. Perhaps the color box of the c300 is early, with 6 android.

Post has been editedtemamix - 19.02.18, 21:56