5 pagesV  < 1 2 3 4 5 > »  
 
REPLY
> Keenetic Lite (KN-1310) - Discussion | [wifirouter]
enpa
Message#1
09.02.18, 11:10
case # number
*********
[online]

Topics Curator
Group: Curators
Messages 4328
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

Keenetic Lite (KN-1310)- Discussion
ZyXEL Keenetic Lite III - Discussion
Attached Image

Information
Description
  • Product Name:Lite
  • Part Number:KN-1310-01RU
  • NDM HW ID:KN-1310
  • Any Internet tariffs up to 100 Mbps, MultiWAN, IPTV and Smart TV
  • High-precision 5-dBi printed Wi-Fi antennas
  • 4 modes of operation: Internet center, access point, adapter, Wi-Fi amplifier
  • Switch on the case for easy setup in additional modes
  • Yandex.DNS and SkyDNS: protection against cyber threats and parental control
  • Configure and manage your home network via mobileattachment
Additional photo
Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

Attached Image

foto by enpa
Specifications
Main characteristics

Model Index - KN-1310
The processor - MediaTek MT7628N (MIPS24Kc) 575MHz
RAM - 64 MB (DDR2)
Flash Memory - 16 MB (Dual Boot)
Wi-Fi 2.4 - Yes
Wi-Fi Class - WiSoC 2T2R / 300Mbps (2.4GHz)
Antennas - 2x 5dBi (eLNA)
Ethernet Ports - 5x FE (10/100) LED

Wi-Fi / WPS button ✔
Modes of access point, amplifier, adapter - Yes, with a switch on the case

Performance

2.4 GHz Wi-Fi network speed - 300 Mbps
IPoE / PPPoE Routing - Up to 95 Mbps
L2TP / PPTP Routing - Up to 95 Mbps

Functions and protocols

IPoE ✔
PPPoE ✔
PPTP ✔
L2TP ✔
802.1x
CABiNET ✔
Multiple PPP Tunnels ✔
PAP / CHAP / MS-CHAP / MS-CHAP v2 ✔
MPPE (Auto / 40/56/128)
VLAN IEEE 802.1Q ✔
Route Table (DHCP / Manual) ✔
Link Duo ✔
DHCP (client / server) ✔
IPv6 Dual Stack ✔
NAT ✔
Igmp ✔
UPnP
Manual port forwarding ✔
PPTP / L2TP Transit ✔
SPI DoS Attack Firewall ✔
Ping checker ✔

Wi-Fi wireless network

WEP / WPA-PSK / WPA2-PSK Network Protection ✔
Support for additional guest Wi-Fi network ✔
MAC access control ✔
WPS Quick Setup ✔
Wi-Fi Multimedia (WMM)

Applications

Mobile application for Android and iOS ✔
UDP to HTTP proxy ✔
IPSec VPN Client / Server ✔
PPTP VPN VPN 10
Internet filter Yandex.DNS ✔
Parental control SkyDNS ✔
Dynamic DNS client ✔

Physical characteristics and environmental conditions

Device dimensions without antenna, W x D x H - 159mm x 110mm x 29mm
Mass device - 200g
Operating temperature range - 0-40 ° С
Humidity of the ambient air during operation - 20% - 95% (no condensation)
Power supply - 100–240 V 50/60 Hz

Diagnostics and control

Web configurator in Russian ✔
Command Line (CLI) by TELNET
The ability to control from the external network ✔
Backup and restore configuration ✔
Software update features ✔
Logging system events ✔

Equipment

Device
Power adapter ✔
Ethernet cable ✔
Instructions for use ✔
Certificates
Documentation
Reviews, links
Useful information
Problem solving, setup
NDMS V2 + Entware
Keenopt setup
OpenVPN setup
[Entware] Raise OpenVPN server
[Entware] Openvpn client on the router
Enable 802.11n standard on NDMSv2 firmware (via CLI TELNET)
Forced assignment of N mode (compatibility N) for Wi-Fi via CLI from enpa
Wordpress on Entware
How to print from phone to printer via Android OS
Antenna Comfast CF-ANT2410DA for a place native to Keenetic II, Giga II
Flash modem in HiLink for maximum speed
CAT5 HiLink Speed ​​Test
All about IP Cloud (KeenDNS)
"White" IP from Rostelecom using Entware
Wake on Lan (WOL) function in ZyXEL Keenetic routers
A bit of theory on the mechanism of updating NDMSv2 firmware from _Danila_Master_
Yandex disk / WebDAV in ZyXEL Keenetic
Wi-Fi signal attenuation coefficients when passing through various environments
How to change the network name of the smartphone in Android?
EaseUS Partition Master Free is a handy program for partitioning a hard disk into partitions (suitable for creating a partition in ext3, creating two ntfs & ext3 partitions).
What type of file system and paging file is best to use? Enpa description
What type of file system and paging file is best to use? Option from miltt
Correction of the Transmission operation without reinstalling the router firmware from enpa
How to determine the type of antenna connector (SMA / RP-SMA)?
NTP SERVERS - time servers
Using the zram paging file (LZO) for the swap location from enpa
Creating an ISP (Internet Service Provider) interface via CLI (command line) from enpa
Lock site by name on the firmware from dezhik
If you need port 5 to distribute the Internet to devices on the wire from enpa
Speed ​​limit via CLI (command line) from enpa
PuTTY is a client program for working with network protocols SSH, Telnet, SCP, SFTP, for connecting via a COM port and ZModem, a utility for generating RSA and DSA digital SSH keys.
Solving the problem with ping in games specifically WOT for Wi-Fi from freealbert
WPS on a router - what it is and how to use it
Setting up a connection to a working VPN server using a "gray IP" at the provider from YEDkii
Forced assignment of speed on the port of the router through the CLI from enpa
Resetting factory settings (factory-reset) via CLI from enpa
2 ways to change the MAC address of a computer network card
Zyxel Keenetic Giga III + Zyxel Keenetic Plus DECT - Internet and telephony in the office from WOOF11
The impact of USB 3.0 devices on the quality of data transmission over the air
ΜTorrent client setup
Zyxel GIGA III router: setting up simultaneous work with several Internet channels from Sergei Golubitskiy (youtube video instruction)
Extending your home Wi-Fi network with Dalex-NEMAN ZyXEL PLA4201v2 EE powerline adapters
We fix the display of interfaces in the Connections section of enpa
Installing Keenetic Giga III in a private house from olezel
Setting up remote access Transmission from enpa
Setting up and installing minidlna (1.1.6 + git-8a996b-1) opag-package from enpa
Configuring and installing the syslog-ng opkg-package for recording logs to external media from enpa
Firmware update using enpa CLI TELNET command line
Turning off the LEDs of the router using the CLA TELNET command line from enpa
Disabling the FN button LED using the enpa CLI TELNET command line
When adding a torrent, you can choose which files to download?
Solving display problems \ login by domain name (hostname) of Keenetic router in Windows 10 from enpa
Using the WAN port as a LAN port in Keenetic Giga III \ Ultra II using the enpa CLI TELNET command line
Changing a Wi-Fi wireless channel in Keenetic using the enpa CLI TELNET command line
Configure automatic reboot using CLI TELNET by _Danila_Master_
Comments on the work of the Padavana TX Burst
Four Stream - Does the KN-1010 HT processor software support? Information from balian007
Turn on seamless Wi-Fi roaming and block Internet advertising on Keenetic routers from hwp.ru
TTL lock
Keenetic Recovery
Instructions

Internet connection setup:

Install and configure KeeneticOS:

Reset:

Diagnostics:

Recovery firmware:

Reservation

Speed ​​Limit:

Remote access:

VLAN:

Forwarding and port configuration:

Wi-Fi setup:

WPS (Wi-Fi Protected Setup):

Security and DNS:

schedule:

Tunnels: PPTP, L2TP \ IPSec, IPSec, SSTP, OpenVPN, VPN server:

Digital television:

CLI (command line), SSH:

Modes:

IntelliQoS:
Internet speed testing
http://www.speedtest.net/ru/
https://www.nperf.com/ru/
https://2ip.ru/speed/

Attention! Testing servers are provided by external providers and the results of such tests depend on many technical factors.

Test results from these services can only be used for diagnostic purposes.
Application to manage the router
Firmware


The official version of KeeneticOS
Debug version of KeeneticOS
Debug - test (draft) release of the operating system. Repeats the functionality that is in the officially released versions of "Release" or "Beta", but also contains additional fixes and new features. The debug version is under development and may contain bugs.

  • Testing debug versions of KeeneticOS is carried out on the forum Keenetic -here.
  • Changelog of debug versions of KeeneticOS -here.
  • Binary files of debug versions of KeeneticOS, you can download in Keenetic firmware storage -hereandhere.
The program for recovering firmware Keenetic Lite KN-1310.
KeeneticOS firmware catalog

The curator of the topic is enpa


Post has been editedenpa - 25.05.19, 17:51
Reason for editing: Keenetic (Android) - beta version of the new application for managing routers Keenetic
Zhyrnov
Message#42
09.12.18, 18:49
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 83
Check in: 19.12.13
Apple iPhone 7

Reputation:-  2  +

Gap37 @ 08.12.18, 18:57*
Tell me which is better to take?


Lite has amplifiers of reception of a radio signal, are unsoldered on a payment directly before an exit on feeders.
The rest is all the same +1 port.
enpa
Message#43
30.12.18, 00:25
case # number
*********
[online]

Topics Curator
Group: Curators
Messages 4328
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

Stable firmware version2.14.C.0.0-4 from 12/26/2018for KN-1310

Component kit
base
easyconfig
config-ap
corewireless
ppp
config-client
pppoe
ydns
config-repeater
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
pingcheck
trafficcontrol
ddns
safedns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes
2.14.C.0.0-4

Corrections:

Fixed renewal of SSL certificates

(c)https://help.keenetic.com/

Installation process and debug mode
1. Download firmware version 2.14.C.0.0-4
2. Installby file upload.
3. Dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.14.C.0.0-4 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disabledebug mode.
6. We send debug self-test fileofficial technical support.

Attached fileKN-1310_stable_2.14.C.0.0-4.zip(5.99 MB)

Mirror:
cloud.mail - v2.04-v2.14 Firmware Keenetic
yandex.disk - v2.04-v2.14 Firmware Keenetic
Picture
Vlacher
Message#44
03.01.19, 19:41
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 58
Check in: 17.06.15
Huawei Y3 II LUA-U22

Reputation:-  1  +

Good evening everyone. I bought this device, but I can not configure it. Provider Beeline. As soon as he didn’t exhaust, there is no connection. I tried to configure via the configurator (writes that the configuration is complete, but failed to connect to the Internet) .. Before that, there was a dirk of 300, it worked stably, but the speed was severely cut off. How to configure it will tell. thank

Post has been editedVlacher - 03.01.19, 19:42


--------------------
Once I thought that the phone was exclusively for calls, but time showed that I was wrong. Now until the heap of Powerbank is missing ....
Ilya Khrupalov
Message#45
05.01.19, 01:50
Old resident
*******
[online]

Group: Friendssavagemessiahzine.com
Messages 758
Check in: 26.02.18
Samsung Galaxy A3 (2017) SM-A320F / DS

Reputation:-  78  +

* Vlacher,in support of the kinetics did not help?


--------------------
Does Keenetic not work? Ask not here, but in official support.
Kaizeres
Message#46
05.01.19, 10:54
User
****
[offline]

Group: Friendssavagemessiahzine.com
Messages 65
Check in: 23.01.13

Reputation:-  1  +

Good afternoon. IPTV from Rostelecom pull?

* Docent_75RU, hi. problem with Rostelecom managed to solve? atoms are going to buy this model

Post has been editedenpa - 09.01.19, 14:28
enpa
Message#47
09.01.19, 14:28
case # number
*********
[online]

Topics Curator
Group: Curators
Messages 4328
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

* Kaizeres,Yes, Keenetic supports any type of IPTV connection.

IPTV + Rostelecom setup example -here.


--------------------
enpa
Message#48
12.02.19, 13:09
case # number
*********
[online]

Topics Curator
Group: Curators
Messages 4328
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

Official beta firmware version2.15.B.0.0-1 of February 11, 2019for KN-1310

Component kit
base
easyconfig
config-ap
corewireless
ppp
config-client
pppoe
ydns
config-repeater
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
pingcheck
trafficcontrol
ddns
safedns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes
2.15.B.0.0-1

Supported Models:

Keenetic Giga (KN-1010)
Keenetic Start (KN-1110)
Keenetic 4G (KN-1210)
Keenetic Lite (KN-1310)
Keenetic Omni (KN-1410)
Keenetic City (KN-1510)
Keenetic Air (KN-1610)
Keenetic Extra (KN-1710)
Keenetic Ultra (KN-1810)
Keenetic Viva (KN-1910)
Keenetic DSL (KN-2010)
Keenetic Duo (KN-2110)
Zyxel Keenetic Start II
Zyxel Keenetic Lite III rev.B
Zyxel Keenetic 4G III rev.B
Zyxel Keenetic Giga III
Zyxel Keenetic Ultra II
Zyxel Keenetic Air
Zyxel Keenetic Extra II

Beta version is the official release of updated components that have undergone internal testing and are at the stage of final debugging.

To install the beta version, we recommend updating the Internet Center from mobile devices via the My.Keenetic application or the web configurator.

New features and improvements:

The component "Wi-Fi system controller" has been added to automatically control access points connected via cable;
Implemented support for 802.11v WNM BTM (BSS Transition Management);
Fixed PMK-R1 key exchange problems in FT roaming;
Implemented traffic monitor for arbitrary registered devices;
Implemented ACMEv2 protocol and getting wildcard certificates for KeenDNS domain names;
A form for accepting an End-user License Agreement has been added to the Quick Setup Wizard;
Added support for new Keenetic mobile app;
The automatic connection mode ADSL / VDSL (models KN-2010, KN-2110) is implemented;
Added support for USB modems MTS 872FT, MTS 874FT, MTS 835FT (MF920T) (for models with USB port);
Additional modes: port 0 has been added to the segment settings (for Keenetic Giga III, Ultra II, Giga, Ultra and Viva);
Fixed 802.1p packet transmission with zero VLAN ID;
The implementation of the SMB / CIFS server has been changed from CIFS NQ to Tuxera SMB (for models with USB storage support):
- Support for durable filehandles (launch applications from a network drive, etc.);
- Support master browser function;
- Support for Windows Backup;
- Support for Apple Time Machine.

New features Zyxel Keenetic Plus DECT:

Added support for Panasonic KX-TG7175, Panasonic KX-TG8562, Panasonic KX-PRXA10;
The correct display of numbers with an extension set on CAT-iq 2 handsets is implemented;
Implemented limiting line selection through # in accordance with the rules of dialing;
Fixed problem when re-copying call history or phone book;
Fixed replacing the outgoing call number when the replacement rule contains T;
Fixed line selection through # when dialing one character at a time.

(c)https://help.keenetic.com/

Installation process and debug mode
1. Download firmware version 2.15.B.0.0-1
2. Installby file upload.
3. Check the work.

If after installing 2.15.B.0.0-1 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disabledebug mode.
6. We send debug self-test fileofficial technical support.

Attached fileKN-1310_beta_2.15.B.0.0-1.zip(6.28 MB)

Mirror:
cloud.mail - v2.04-v2.15 (Test, Beta Firmware) All Keenetic
yandex.disk - v2.04-v2.15 (Test, Beta Firmware) All Keenetic
Picture


Post has been editedenpa - 12.02.19, 13:26
Docent_75RU
Message#49
25.02.19, 23:41
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 182
Check in: 08.11.14
Lenovo Vibe P1

Reputation:-  23  +

Hello! Rostelecom did not win, they are smarter;). Moved to another provider.

Post has been editedDocent_75RU - 25.02.19, 23:41
_mad_
Message#50
26.02.19, 18:02
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 346
Check in: 08.02.17
Apple iPad mini 2

Reputation:-  34  +

* Gap37,
besides port 5, the Lite kn-1310 has a mode switch button (from a router, for example, to an access point or an adapter), and additional amplifiers of the received signal, it’s better to hear what weak wireless clients are sending
while the Start kn-1110 has such advantages as price and compactness))
enpa
Message#51
01.03.19, 23:27
case # number
*********
[online]

Topics Curator
Group: Curators
Messages 4328
Check in: 14.07.13
Oneplus 6 8GB RAM

Reputation:-  1012  +

Stable firmware version2.15.C.0.0-0 dated February 28, 2019for KN-1310

Component kit
base
easyconfig
config-ap
corewireless
ppp
config-client
pppoe
ydns
config-repeater
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
pingcheck
trafficcontrol
ddns
safedns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes
2.15.C.0.0-0

New features and improvements:

The component "Wi-Fi System Controller" has been added to automatically control access points connected via cable;
Implemented 802.11v WNM BTM (BSS Transition Management) support for seamless Wi-Fi roaming;
Fixed PMK-R1 key exchange problems in FT roaming;
Implemented traffic monitor for arbitrary registered devices;
Implemented ACMEv2 protocol and getting wildcard certificates for KeenDNS domain names;
A form for accepting an End-user License Agreement has been added to the Quick Setup Wizard;
For DSL (KN-2010) and Duo (KN-2110) models, the ADSL / VDSL automatic connection mode is implemented;
Added support for USB modems MTS 872FT, MTS 874FT, MTS 835FT (MF920T) (for models with USB port);
Additional modes: port 0 has been added to the segment settings (for Keenetic Giga III, Ultra II, Giga, Ultra and Viva);
Fixed 802.1p packet transmission with zero VLAN ID;
Fixed counters for OpenVPN connections;
Fixed possible loss of settings for L2TP / IPsec and Virtual IP;
Added support for new Keenetic mobile application (beta testing);
Added support for Tuxera SMB SMB / CIFS server (beta testing) (for models with USB storage support).

Advantages of Tuxera SMB:

Support for Durable Filehandles (launch applications from a network drive, etc.);
Master Browser function support;
Support for Windows Backup;
Apple Time Machine support.

New features of Keenetic Plus DECT:

Added support for Panasonic KX-TG7175, KX-TG8562, KX-PRXA10, KX-TCD450, KX-TGA810, KX-TCA130, KX-TGC310, KX-TGA661, KX-TCA155, KX-TCA125, KX-TCA120; Gigaset 2000S, 3000C;
The correct display of numbers with an extension set on CAT-iq 2 handsets is implemented;
Implemented limiting line selection through # in accordance with the rules of dialing;
Fixed problem when re-copying call history or phone book;
Fixed replacing the outgoing call number when the replacement rule contains T;
Fixed line selection via # when dialing one character at a time;
Fixed problems with Yealink W52H;
Fixed problems with the work lines without registration;
Fixed errors when editing the number containing the dialing rule;
Fixed errors in reading CAT-iq base settings with 2 handsets;
Fixed display on the handset settings redirect incoming call timeout;
Fixed the phone book with a contact without a last name.

(c)https://help.keenetic.com/

Installation process and debug mode
1. Download firmware version 2.15.C.0.0-0
2. Installby file upload.
3. Check the work.

If after installing 2.15.C.0.0-0 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disabledebug mode.
6. We send debug self-test fileofficial technical support.

Attached fileKN-1310_stable_2.15.C.0.0-0.zip(6.34 MB)

Mirror:
cloud.mail - v2.04-v2.15 Firmware Keenetic
yandex.disk - v2.04-v2.15 Firmware Keenetic
Picture
patrolman
Message#52
03.03.19, 19:13
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 148
Check in: 11.02.14
ZTE Nubia Z11 Mini S

Reputation:-  1  +

Please explain (I understand poorly), the Internet speed from Beeline is 100 Mbps, I get sm.screen on wi-fi, the smartphone is located next to the router. Beeline argues that the reason for the low speed in the router. What to see in the settings of the router?
Attached Image
_mad_
Message#53
03.03.19, 21:32
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 346
Check in: 08.02.17
Apple iPad mini 2

Reputation:-  34  +

* patrolman,
You can start digging from the My Networks and Wi-Fi menu - Device List
There to see how the smartphone connects
patrolman
Message#54
03.03.19, 22:00
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 148
Check in: 11.02.14
ZTE Nubia Z11 Mini S

Reputation:-  1  +

* _mad_,
Watched there all right

Attached images
Attached Image


Post has been editedpatrolman - 03.03.19, 22:02
Reason for editing: Extra
Ssa45
Message#55
04.03.19, 06:04
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 500
Check in: 25.12.09

Reputation:-  49  +

* patrolman,
Contact Keenetic tech support. They will help you faster


--------------------
Main: ZTE Nubia Z7 Max - MK60.1-nx505j-170418-HISTORY
Auxiliary: Micromax Joy X1800
Tablet: Prestigio Visconte Quad PMP880TD
Vlad-F
Message#56
04.03.19, 10:31
a guest
*
[offline]

Group: Users
Messages 5
Check in: 14.11.12
Zopo ZP500 Libero

Reputation:-  0  +

And yet, guys, what is he with Beeline? Does anyone present have the experience of a seamless connection / setup? And then you can not brief instructions directly in steps?
I want to buy KN-1310 in return for the Beeline SmartBox TURBO + imposed by the provider, which, among other things, is a thousand more expensive. Who will competently say whether it makes sense?
_mad_
Message#57
04.03.19, 11:36
Local
*****
[offline]

Group: Friendssavagemessiahzine.com
Messages 346
Check in: 08.02.17
Apple iPad mini 2

Reputation:-  34  +

* patrolman,
Well, here it is already clear that only 72 Mb / s - apparently, the smartphone pulls only 1x1 20 MHz mode (everything is shown in the web interface, it’s better to watch there). Therefore, 100 from the biline cannot be seen, although instead of 15 in speed tests there should be 30-36 (half from about 72).
Ssa45
Message#58
04.03.19, 13:10
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 500
Check in: 25.12.09

Reputation:-  49  +

* _mad_,
I have Beeline, and exactly as you wrote on the connection speed

Posted 04/03/2019 13:14:

* Vlad-F,
Everything works fine, I switched from Beeline SmartBox to kn-1310, there were no problems

Post has been editedSsa45 - 04.03.19, 13:16


--------------------
Main: ZTE Nubia Z7 Max - MK60.1-nx505j-170418-HISTORY
Auxiliary: Micromax Joy X1800
Tablet: Prestigio Visconte Quad PMP880TD
Vlad-F
Message#59
04.03.19, 15:55
a guest
*
[offline]

Group: Users
Messages 5
Check in: 14.11.12
Zopo ZP500 Libero

Reputation:-  0  +

* Ssa45,
Understand you, thank you, as I will have to set up the KN-1310, at least quite tentatively, as an access point for tablets / notebook, if I come with him to the apartment where SmartBox had already been taken off the day before, and without having a mobile Internet access to online resources?
Ssa45
Message#60
05.03.19, 06:15
Experienced
******
[offline]

Group: Friendssavagemessiahzine.com
Messages 500
Check in: 25.12.09

Reputation:-  49  +

* Vlad-F,
I have firmware version 2.14 - it was extreme at that time. You must first connect to the Internet and put the components for L2TP - I have a connection to Beeline through it. Then we simply enter the login and password on the spot and the L2TP connection should rise and make money. I have one more connection via DHCP - it itself appeared when connecting the wire to the router, do not delete it, let it be.


--------------------
Main: ZTE Nubia Z7 Max - MK60.1-nx505j-170418-HISTORY
Auxiliary: Micromax Joy X1800
Tablet: Prestigio Visconte Quad PMP880TD
Vlad-F
Message#61
05.03.19, 10:37
a guest
*
[offline]

Group: Users
Messages 5
Check in: 14.11.12
Zopo ZP500 Libero

Reputation:-  0  +

* Ssa45,
I didn’t quite understand how to “pre-connect and install components”. What components and where exactly to put? At the time of the connection, I will not have an alternative Internet, I thought to plug a Beeline cable into the router under discussion, then connect it with a laptop with a patchcord and already there in the browser, enter the address of the router, configure everything. Do not get so?

5 pagesV  < 1 2 3 4 5 > » 


 mobile version    Now: 05/29/19, 23:14