[X]Assistant

[enpa]

Keenetic Lite (KN-1310)- Discussion
ZyXEL Keenetic Lite III - Discussion

Information

• Official Keenetic Community Firm Support Forum
  
• Official Support Center on Keenetic.net (registration is required)
  
• Registering a device on Keenetic.net (3 years warranty from the date of purchase + 1 year upon registration)
  
• Keenetic authorized service centers:Russia, Ukraine, Kazakhstan, Republic of Belarus
• Transmitter Power at Keenetic Home Internet Centers

Description

• Product Name:Lite
  
• Part Number:KN-1310-01RU
  
• NDM HW ID:KN-1310

• Any Internet tariffs up to 100 Mbps, MultiWAN, IPTV and Smart TV
  
• High-precision 5-dBi printed Wi-Fi antennas
  
• 4 modes of operation: Internet center, access point, adapter, Wi-Fi amplifier
  
• Switch on the case for easy setup in additional modes
  
• Yandex.DNS and SkyDNS: protection against cyber threats and parental control
  
• Configure and manage your home network via mobileattachment

Additional photo

foto by enpa

Specifications

Main characteristics

Model Index - KN-1310
The processor - MediaTek MT7628N (MIPS24Kc) 575MHz
RAM - 64 MB (DDR2)
Flash Memory - 16 MB (Dual Boot)
Wi-Fi 2.4 - Yes
Wi-Fi Class - WiSoC 2T2R / 300Mbps (2.4GHz)
Antennas - 2x 5dBi (eLNA)
Ethernet Ports - 5x FE (10/100) LED
Wi-Fi / WPS button вњ”
Modes of access point, amplifier, adapter - Yes, with a switch on the case

Performance

2.4 GHz Wi-Fi network speed - 300 Mbps
IPoE / PPPoE Routing - Up to 95 Mbps
L2TP / PPTP Routing - Up to 95 Mbps

Functions and protocols

IPoE вњ”
PPPoE вњ”
PPTP вњ”
L2TP вњ”
802.1x
CABiNET вњ”
Multiple PPP Tunnels вњ”
PAP / CHAP / MS-CHAP / MS-CHAP v2 вњ”
MPPE (Auto / 40/56/128)
VLAN IEEE 802.1Q вњ”
Route Table (DHCP / Manual) вњ”
Link Duo вњ”
DHCP (client / server) вњ”
IPv6 Dual Stack вњ”
NAT вњ”
Igmp вњ”
UPnP
Manual port forwarding вњ”
PPTP / L2TP Transit вњ”
SPI DoS Attack Firewall вњ”
Ping checker вњ”

Wi-Fi wireless network

WEP / WPA-PSK / WPA2-PSK Network Protection вњ”
Support for additional guest Wi-Fi network вњ”
MAC access control вњ”
WPS Quick Setup вњ”
Wi-Fi Multimedia (WMM)

Applications

Mobile application for Android and iOS вњ”
UDP to HTTP proxy вњ”
IPSec VPN Client / Server вњ”
PPTP VPN VPN 10
Internet filter Yandex.DNS вњ”
Parental control SkyDNS вњ”
Dynamic DNS client вњ”

Physical characteristics and environmental conditions

Device dimensions without antenna, W x D x H - 159mm x 110mm x 29mm
Mass device - 200g
Operating temperature range - 0-40 В° РЎ
Humidity of the ambient air during operation - 20% - 95% (no condensation)
Power supply - 100–240 V 50/60 Hz

Diagnostics and control

Web configurator in Russian вњ”
Command Line (CLI) by TELNET
The ability to control from the external network вњ”
Backup and restore configuration вњ”
Software update features вњ”
Logging system events вњ”

Equipment

Device
Power adapter вњ”
Ethernet cable вњ”
Instructions for use вњ”

Certificates

RU C-TW.РђРЇ46. Р’.82580 (up to 10.26.2022) .pdf.zip(3.25 MB)

RU00000034753 (up to 12/31/2025) .pdf.zip(506.05 KB)

Documentation

Instructions for use KN-1310.pdf(449.89 KB)

Description and Specifications KN-1310.pdf(1.02 MB)

Reference CLI Command Interface KN-1310.pdf(3.86 MB)

Reviews, links

Keenetic Resources

Keenetic official website
Official Keenetic Block
VK official group
Official Facebook page
Instagram official page
Keenetic Telegram's Unofficial Channel
Information channel Keenetic firmware in Telegram
KeeneticOS Developer Forum

Reviews, tests, reviews

Full information about Lite KN-1310 on Keenetic.net website
Keenetic Lite KN-1310 on the market.yandex.ru

Useful information

Problem solving, setup

NDMS V2 + Entware
Keenopt setup
OpenVPN setup
[Entware] Raise OpenVPN server
[Entware] Openvpn client on the router
Enable 802.11n standard on NDMSv2 firmware (via CLI TELNET)
Forced assignment of N mode (compatibility N) for Wi-Fi via CLI from enpa
Wordpress on Entware
How to print from phone to printer via Android OS
Antenna Comfast CF-ANT2410DA for a place native to Keenetic II, Giga II
Flash modem in HiLink for maximum speed
CAT5 HiLink Speed ​​Test
All about IP Cloud (KeenDNS)
"White" IP from Rostelecom using Entware
Wake on Lan (WOL) function in ZyXEL Keenetic routers
A bit of theory on the mechanism of updating NDMSv2 firmware from _Danila_Master_
Yandex disk / WebDAV in ZyXEL Keenetic
Wi-Fi signal attenuation coefficients when passing through various environments
How to change the network name of the smartphone in Android?
EaseUS Partition Master Free is a handy program for partitioning a hard disk into partitions (suitable for creating a partition in ext3, creating two ntfs & ext3 partitions).
What type of file system and paging file is best to use? Enpa description
What type of file system and paging file is best to use? Option from miltt
Correction of the Transmission operation without reinstalling the router firmware from enpa
How to determine the type of antenna connector (SMA / RP-SMA)?
NTP SERVERS - time servers
Using the zram paging file (LZO) for the swap location from enpa
Creating an ISP (Internet Service Provider) interface via CLI (command line) from enpa
Lock site by name on the firmware from dezhik
If you need port 5 to distribute the Internet to devices on the wire from enpa
Speed ​​limit via CLI (command line) from enpa
PuTTY is a client program for working with network protocols SSH, Telnet, SCP, SFTP, for connecting via a COM port and ZModem, a utility for generating RSA and DSA digital SSH keys.
Solving the problem with ping in games specifically WOT for Wi-Fi from freealbert
WPS on a router - what it is and how to use it
Setting up a connection to a working VPN server using a "gray IP" at the provider from YEDkii
Forced assignment of speed on the port of the router through the CLI from enpa
Resetting factory settings (factory-reset) via CLI from enpa
2 ways to change the MAC address of a computer network card
Zyxel Keenetic Giga III + Zyxel Keenetic Plus DECT - Internet and telephony in the office from WOOF11
The impact of USB 3.0 devices on the quality of data transmission over the air
ОњTorrent client setup
Zyxel GIGA III router: setting up simultaneous work with several Internet channels from Sergei Golubitskiy (youtube video instruction)
Extending your home Wi-Fi network with Dalex-NEMAN ZyXEL PLA4201v2 EE powerline adapters
We fix the display of interfaces in the Connections section of enpa
Installing Keenetic Giga III in a private house from olezel
Setting up remote access Transmission from enpa
Setting up and installing minidlna (1.1.6 + git-8a996b-1) opag-package from enpa
Configuring and installing the syslog-ng opkg-package for recording logs to external media from enpa
Firmware update using enpa CLI TELNET command line
Turning off the LEDs of the router using the CLA TELNET command line from enpa
Disabling the FN button LED using the enpa CLI TELNET command line
When adding a torrent, you can choose which files to download?
Solving display problems \ login by domain name (hostname) of Keenetic router in Windows 10 from enpa
Using the WAN port as a LAN port in Keenetic Giga III \ Ultra II using the enpa CLI TELNET command line
Changing a Wi-Fi wireless channel in Keenetic using the enpa CLI TELNET command line
Configure automatic reboot using CLI TELNET by _Danila_Master_
Comments on the work of the Padavana TX Burst
Four Stream - Does the KN-1010 HT processor software support? Information from balian007
Turn on seamless Wi-Fi roaming and block Internet advertising on Keenetic routers from hwp.ru

TTL lock

How to fix TTL
Management of TTL value for incoming (from provider) and outgoing (to provider) packets

Keenetic Recovery

Example of restoring service code (servicetag) from olegk1
Example of restoring service code (servicetag) from LuckyNeo
An example of recovery through the unsoldered connector of the router console from Must_Die
Example of firmware recovery with the replacement of the firmware file from Leonid28
Detailed instructions for restoring environment variables in ZyXEL Keenetic series Internet centers and new Keenetic series from _Danila_Master_

Instructions

Keenetic Support Center (articles, instructions)

Internet connection setup:

• NetFriend Initial Setup Wizard
  
• Ways to connect to the Internet
  
• Ethernet connection to the Internet
  
• Internet connection via optics (SFP module)
  
• PPPoE Internet connection
  
• Connect to the Internet via PPTP or L2TP
  
• Connecting to the Internet via a 3G / 4G modem
  
• Connect to the Internet via ADSL
  
• Connect to the Internet via VDSL
  
• Configure a VDSL connection between two Internet centers
  
• Connecting to a Wi-Fi network (Wireless ISP)
  
• Other connections
  
• Connection Priorities
  
• Connecting home network devices
  
• Web Configurator (control panel)
  
• Instructions for the initial setup of Internet centers through the Quick Setup Wizard (for NDMS versions 2.11 and earlier)
  
• Self-configuring Keenetic to connect to the Internet via an Ethernet cable (for NDMS versions 2.11 and earlier)
  
• Internet Center and GPON-modem sharing options
  
• MTU value setting
  
• Configuring the network adapter MAC address cloning (for NDMS versions 2.11 and earlier)
  
• WAN MAC address change

Install and configure KeeneticOS:

• System monitor
  
• Host traffic monitor
  
• Network accelerator
  
• Windows network (file and printer access)
  
• Online Center Software Update
  
• Automatic update of the operating system
  
• Beta Software Update
  
• Installing and updating firmware by downloading the system file
  
• Saving startup-config configuration file
  
• Saving self-test system file
  
• Change the mode of operation and assignment of network connectors
  
• Purpose of buttons and indicators of the Internet center
  
• Indicator Management
  
• Users and access (how to change the administrator password)
  
• Description of the components of the Internet Center firmware
  
• Installing and upgrading NDMS versions by downloading a file (for NDMS versions 2.11 and earlier)
  
• Configuration files (system files)
  
• Updating the components of the Internet center through the mobile application My.Keenetic
  
• Installation of NDMS operating system components via a web interface (for NDMS versions 2.11 and earlier)
  
• Setting up Internet center user accounts
  
• Internet center light indicators control (for NDMS versions 2.11 and earlier)
  
• Why is Keenetic Internet Center unavailable at my.keenetic.net web address, but only at IP address?
  
• How to assign functions to the buttons that are located on the Keenetic case (for NDMS versions 2.11 and earlier)
  
• Variants of the DHCP server on the interfaces of the Internet center
  
• Option "Install updates automatically" (for NDMS versions 2.11 and earlier)

Reset:

• Resetting the Internet center and administrator password
  
• Resetting the Internet center and administrator password (using the Reset button)

Diagnostics:

• Diagnostics
  
• Collecting logs from the Keenetic system log when the device is unavailable (hang)
  
• Perform diagnostics (debugging) to resolve configuration issues or troubleshoot (for NDMS versions 2.11 and earlier)
  
• Saving configuration file, system log and diagnostic file (for NDMS versions 2.11 and earlier)
  
• Configure SNMP server
  
• Saving the log of system messages (logs) on the Syslog server
  
• Diagnostics of client and DHCP server operation
  
• Capture network packets using Wireshark
  
• Using the built-in network packet capture module (for NDMS versions 2.11 and earlier)
  
• How to find out port numbers for some services displayed on the Connections tab in the System Monitor?
  
• Setting speed / duplex parameters on the Ethernet port (for NDMS versions 2.11 and earlier)
  
• When do I need to collect network packet dumps from a computer or a router port?
  
• The ability to use one of the LAN ports as a WAN port in Keenetic Giga III / Ultra II

Recovery firmware:

• How to restore the operating system of the Internet center?
  
• KeeneticOS recovery method (for advanced users)

Reservation

• Connect to multiple providers and reserve online channel
  
• Setting up Internet reservations via 3G / 4G-modem
  
• Internet Accessibility Checker - Ping Check (for NDMS versions 2.11 and earlier)
  
• Simultaneous connection to two providers and reservation of the Internet channel (for NDMS versions 2.11 and earlier)

Speed ​​Limit:

• Speed ​​limit for home network devicesGuest Wi-Fi network
  
• Setting a speed limit for a home network device (for NDMS versions 2.11 and earlier)
  
• Connection speed limit for Guest Wireless devices (for NDMS versions 2.11 and earlier)
  
• How is the bandwidth of the Internet channel between the devices in the local Keenetic network?

Remote access:

• Domain Name Service KeenDNS
  
• An example of remote access to home network resources via KeenDNS
  
• Access to the Internet center via KeenDNS over HTTPS
  
• How to provide remote access to Keenetic Internet Center for technical support?
  
• Remote access via SSH to the Keenetic command line
  
• What is the difference between the "white" and "gray" IP-address?Using KeenDNS remote access service (for NDMS versions 2.11 and earlier)
  
• An example of remote access to home network resources via KeenDNS using domain names 4th level (for NDMS versions 2.11 and earlier)
  
• Setting up remote access to the Internet center from the Internet
  
• Remote access from the Internet to a home network computer connected via Keenetic (for NDMS versions 2.11 and earlier)
  
• An example of remote access to home network resources via the KeenDNS service when Keenetic operates in the Amplifier, Adapter or Access Point mode
  
• An example of remote access to home network resources via the KeenDNS service (using classic NAT rules)
  
• Wake device over network (Wake-on-LAN)
  
• Transfer the domain name KeenDNS to another Internet center

VLAN:

• Sharing tagged and untagged traffic on the WAN port of the Internet centerConfiguring simultaneous operation with tagged and untagged traffic
  
• Organization of several local networks with different main gateways
  
• Creation of several independent subnets on the local area network's Internet using VLAN
  
• Internet reservations between two Internet centers

Forwarding and port configuration:

• Port Forwarding
  
• Forwarding all ports to a local network host (organization of a DMZ host)
  
• Using Xbox and PS4 when connected via Keenetic
  
• Syntax and description of the ip static command to configure NAT network address translation
  
• What to do if port forwarding does not work?
  
• What to do if port forwarding does not work? (for NDMS versions 2.11 and earlier)
  
• When should you use port forwarding and firewall rules?
  
• Port forwarding through the VPN server’s Internet channel to a remote local network behind the VPN client
  
• Configuring port forwarding through a backup connection
  
• Configuring port forwarding in the Internet center (for NDMS versions 2.11 and earlier)
  
• Setting port forwarding in Keenetic to work correctly with the ВµTorrent program
  
• Configure forwarding of all ports to one computer in a local network (for NDMS versions 2.11 and earlier)
  
• How to replace the port number of the Internet center?
  
• Change of standard ports of control of the Internet center
  
• UPnP service

Wi-Fi setup:

• Wi-Fi seamless roaming
  
• Captive portal
  
• Connect to a Wi-Fi network
  
• How to change the name and password of the Wi-Fi network?
  
• 2.4 GHz wireless Wi-Fi network
  
• Wi-Fi 5 GHz Wireless Network
  
• General recommendations for the placement in the apartment of an Internet center with Wi-Fi interface for stable and high-quality wireless network
  
• What affects the operation of wireless networks, Wi-Fi? What could be a source of interference and what are their possible causes?
  
• Keenetic Wireless Power Level Indicator Scale
  
• Wireless connection to the Internet center from Windows 10
  
• Mobile device does not see the Wi-Fi network 5 GHz?
  
• Wi-Fi signal attenuation coefficients when passing through various environments
  
• Why is the Wi-Fi connection speed lower than stated?
  
• MAC address of the access point (BSSID) to connect
  
• Print a QR code to connect to a Wi-Fi network
  
• Wi-Fi network management with a button on the case
  
• Same network name (SSID) in the 2.4 / 5 GHz band
  
• The "Hide SSID" option in the access point settings
  
• Do I need to register an Internet center in Roskomnadzor?
  
• Guest Wi-Fi network
  
• Setting up a Wi-Fi guest wireless network (for NDMS versions 2.11 and earlier)
  
• Setting up an Internet center in WISP mode to work with an upstream access point or a Wi-Fi provider (for NDMS versions 2.11 and earlier)
  
• Selecting a wireless channel for the access point to work
  
• Real connection speed used in Wi-Fi technology
  
• How to scan a Wi-Fi network and determine the most free channel?
  
• How to set the direction of antennas on the Internet center of the Keenetic series?
  
• No internet access from the guest Wi-Fi network
  
• Create additional Wi-Fi access points
  
• What affects the change in the signal power parameter in the settings of the access point?
  
• Basic provisions of the IEEE 802.11ac standard
  
• Basic provisions of the IEEE 802.11n standard
  
• Setting the width of the wireless channel 20/40 MHz
  
• Ways to increase connection speed, bandwidth and stability of a wireless Wi-Fi network
  
• Possible malfunctions of the Wi-Fi network after connecting a USB 3.0 device to the Internet center
  
• Band steering
  
• Beamforming technology
  
• How the Band Steering mechanism works and why include it (for NDMS versions 2.11 and earlier)
  
• Differences in the 2.4 GHz and 5 GHz frequency bands

WPS (Wi-Fi Protected Setup):

• Connect to a Wi-Fi network using the WPS standard
  
• Quick WPS configuration (for NDMS versions 2.11 and earlier)
  
• Setting up a connection to the Internet center via Wi-Fi from a mobile device running Android OS using the WPS function

Security and DNS:

• How is the firewall implemented?
  
• Firewall
  
• Configuring Firewall Rules from the Command Interface
  
• Copy, move and delete multiple firewall rules
  
• The brute force protection feature for accessing the Internet Center
  
• Denying access to the web configurator from the guest network
  
• AdGuard DNS Internet Filter
  
• Internet filter Yandex.DNS
  
• Internet filter SkyDNS
  
• Home network protection and content filtering using the Yandex.DNS service (for NDMS versions 2.11 and earlier)
  
• Protect your home network and filter content using SkyDNS (for NDMS versions 2.11 and earlier)
  
• DDNS Domain Name
  
• Setting up and using the dynamic DNS service from No-IP
  
• Dynamic DNS Service Setup - DNS Master
  
• Using a firewall to provide different access rights to the Internet
  
• Examples of using firewall rules
  
• Examples of using firewall rules (for NDMS versions 2.11 and earlier)
  
• Internet access control feature on home network devices page
  
• How in the Internet center to block access to the Internet on port 80 (HTTP) to all users, except one, with the specified IP address?
  
• How to block access to a specific site?
  
• Configuring the Internet Center to block the access of the home network to a specific web resource (for NDMS versions 2.11 and earlier)
  
• How to block access to your own Internet center resources (web, cli, cifs, ftp, transmission) from the Guest Wireless Network?
  
• Configure Internet Center firewall rules that use a range of IP addresses or ports
  
• Examples of Internet center firewall rules that use port ranges
  
• When should you use port forwarding and firewall rules?
  
• Wi-Fi access control
  
• MAC access control for Wi-Fi wireless network (for NDMS versions 2.11 and earlier)
  
• In what order are the firewall rules executed?
  
• Using public DNS servers in the Internet center
  
• Firewall Description (for NDMS 2.11 and earlier)
  
• WPA2 KRACK vulnerability protection

schedule:

• Connection schedule
  
• Schedule home network devices
  
• Setting up schedules in the Internet center (for NDMS versions 2.11 and earlier)
  
• Parental Control: Disconnecting the Internet on a Schedule (for NDMS versions 2.11 and earlier)
  
• Disable all indicators on schedule
  
• Internet center reboot on schedule
  
• Schedule of firewall and port forwarding rules

Tunnels: PPTP, L2TP \ IPSec, IPSec, SSTP, OpenVPN, VPN server:

• All about IPIP, GRE and EoIP tunnels (starting with firmware v2.08)
  
• Tuning IPIP, GRE and EoIP tunnels
  
• Setting up an IPSec VPN tunnel between the Internet hub and a Windows computer
  
• IPSec VPN client / server
  
• IPSec VPN tunnel organization between two Keenetic Internet Centers (for NDMS versions 2.11 and earlier)
  
• An example of creating IPSec connections using Windows operating system
  
• Connect Windows to IPsec Virtual-IP via Shrew VPN Client
  
• Setting up an IPSec VPN (IPSec Virtual IP) tunnel between Keenetic and a mobile device with Android OS
  
• Setting up an IPSec VPN tunnel (IPSec Virtual IP) between Keenetic and a mobile device with iOS
  
• Setting up an IPSec VPN (IPSec Virtual IP) tunnel between Keenetic and a Windows computer
  
• Setting up an IPSec VPN (IPSec Virtual IP) tunnel between Keenetic and a computer with Mac OS
  
• Combining two local area networks with gray IP addresses using Keenetic via vpnki
  
• PPTP VPN server
  
• Setting up a PPTP VPN server in Keenetic (for NDMS versions 2.11 and earlier)
  
• Creating a PPTP Connection in Windows OS to the Internet Center VPN Server
  
• Static IP address for user when connecting to Keenetic PPTP server
  
• Connection to the PPTP server of the Internet center for several users under one account
  
• How can I set up IPTV viewing through a connection to a PPTP server on the Internet center?
  
• Network Routing through VPN
  
• Connect two local networks using Keenetic Internet Centers using PPTP Server (for NDMS versions 2.11 and earlier)
  
• Connect to the VPN server of the Internet center to access a remote local network and to gain access to the Internet
  
• Features of connecting to the PPTP server of the Internet center from Windows
  
• Is it possible to connect more than two home networks with the help of Internet centers using PPTP Server?
  
• Port forwarding through the VPN server’s Internet channel to a remote local network behind the VPN client
  
• OpenVPN Client
  
• OpenVPN server
  
• Local area networking via OpenVPN
  
• An example of setting up access between local networks of Keenetic Internet Centers using the OpenVPN server located in the cloud hosting
  
• Is it possible to create an OpenVPN server like TAP?
  
• Using the OpenVPN client (for NDMS versions 2.11 and earlier)
  
• OpenVPN server on Keenetic (for NDMS versions 2.11 and earlier)
  
• Connecting via SSTP from Windows
  
• SSTP connection from Android
  
• SSTP VPN server
  
• L2TP / IPsec Client (L2TP over IPsec)
  
• Connecting to the integrated L2TP / IPSec VPN server from a device on iOS and Windows
  
• L2TP / IPsec connection example in Windows 7
  
• VPN server L2TP / IPsec
  
• Configuring Windows Firewall for connections from the network behind a Keenetic VPN server

Digital television:

• Setting up an IPTV connection (IPTV)
  
• Setting up Keenetic Internet Center for watching digital television (IPTV) (for NDMS versions 2.11 and earlier)
  
• UDP proxy
  
• Setting up IPTV viewing using the UDP Proxy function (UDP-HTTP proxy) (for NDMS versions 2.11 and earlier)
  
• Setting up access to the Internet and IPTV when the provider provides both services with tagged traffic (VLAN)
  
• How can I set up IPTV viewing through a connection to a PPTP server on the Internet center?
  
• Setting up Keenetic DSL Internet Center for IPTV
  
• The option of using the Internet center to watch IPTV, which comes to the GPON-modem
  
• Setting up an IPTV from Rostelecom when connected to the Internet via Ethernet
  
• Setting up simultaneous access to the Internet and IPTV service through two different providers
  
• Setting up access to the Internet and IPTV when the provider provides both services with tagged traffic (VLAN)

CLI (command line), SSH:

• Internet Center Command Line Interface (CLI)
  
• Terminal program for Windows
  
• Enabling Telnet and TFTP services in Windows
  
• Connect to the command line interface (CLI) of the Internet Center from Mac OS

Modes:

• Additional modes of operation
  
• Access Point Mode
  
• Amplifier Mode
  
• Adapter Mode
  
• Expansion of Wi-Fi network coverage in "Amplifier" mode (for NDMS versions 2.11 and earlier)
  
• How to configure the wireless bridge mode in the Internet center? (for NDMS versions 2.04)
  
• Access to the Keenetic web configurator when it works in one of the additional modes
  
• Ability to access the web configurator when Keenetic Lite III is in Access Point mode (for NDMS versions 2.11 and earlier)
  
• Internet center in the mode of a normal wireless access point (for NDMS version 2.04)
  
• Update NDMS OS when the Internet center is operating in the mode of a normal wireless access point
  
• An example of remote access to home network resources via the KeenDNS service when Keenetic operates in the Amplifier, Adapter or Access Point mode

IntelliQoS:

• IntelliQoS service
  
• Description of the setting and operation of the IntelliQoS function (for NDMS versions 2.11 and earlier)
  
• How is the bandwidth of the Internet channel between the devices in the local Keenetic network?

Internet speed testing

http://www.speedtest.net/ru/
https://www.nperf.com/ru/
https://2ip.ru/speed/

Attention! Testing servers are provided by external providers and the results of such tests depend on many technical factors.

Test results from these services can only be used for diagnostic purposes.

Application to manage the router

My.Keenetic (iOS) - provides management of basic settings and built-in services of Keenetic Internet Centers

My.Keenetic (Android) - provides management of basic settings and built-in services of Keenetic Internet Centers

Keenetic (Android) - beta version of the new application for managing routers Keenetic

Firmware

Table of current versions of KeeneticOS

Information about releases of KeeneticOS (Announcements of new versions of the embedded operating system with a list of changes)

The official version of KeeneticOS

KeeneticOS out of the box

Keenetic Lite_KN-1310_2.10.B.1.0-1.zip(5.43 MB)

Keenetic Lite_KN-1310_2.10.C.2.0-6.bin.zip(6.77 MB)

2.11

The official beta firmware version 2.11.B.1.0-0 dated 02.22.2018 for Lite KN-1310

Stable version of firmware 2.11.C.0.0-1 from 03/03/2018 for Lite KN-1310

Stable version of the firmware 2.11.C.1.0-2 from 04/06/2018 for KN-1310

2.12

The official beta firmware version 2.12.B.0.0-0 dated 05.23.2018 for KN-1310

The official beta firmware version 2.12.B.0.0-2 dated 05.31.2018 for KN-1310

Stable firmware version 2.12.C.1.0-3 dated 08.08.2018 for KN-1310

2.13

The official beta firmware version 2.13.B.0.0-0 of 08/30/2018 for KN-1310

The official beta firmware version 2.13.B.0.0-2 from 09/07/2018 for KN-1310

Stable firmware version 2.13.C.0.0-1 dated 10/02/2018 for KN-1310

Stable version of the firmware 2.13.C.0.0-3 from 10/17/2018 for KN-1310

2.14

The official beta version of the firmware 2.14.B.0.0-1 from 11/08/2018 for KN-1310

Stable firmware version 2.14.C.0.0-0 dated 12/03/2018 for KN-1310

Stable firmware version 2.14.C.0.0-4 from 12/26/2018 for KN-1310

2.15

The official beta version of the firmware 2.15.B.0.0-1 from 02/11/2019 for KN-1310

Stable firmware version 2.15.C.0.0-0 dated 02.02.2019 for KN-1310

Stable version of KeeneticOS 2.15.C.4.0-1 from 05/16/2019 for KN-1310

Debug version of KeeneticOS

Debug - test (draft) release of the operating system. Repeats the functionality that is in the officially released versions of "Release" or "Beta", but also contains additional fixes and new features. The debug version is under development and may contain bugs.

• Testing debug versions of KeeneticOS is carried out on the forum Keenetic -here.
  
• Changelog of debug versions of KeeneticOS -here.
  
• Binary files of debug versions of KeeneticOS, you can download in Keenetic firmware storage -hereandhere.

The program for recovering firmware Keenetic Lite KN-1310.

Keenetic_Lite_KN-1310-Recovery.zip(6.22 MB)

KeeneticOS firmware catalog

• Keenetic firmware store on cloud.mail from enpa
  
• Keenetic firmware repository on yenpa.disk from enpa
  
• File storage from ndmsystems

The curator of the topic is enpa

Post has been editedenpa - 25.05.19, 17:51

Reason for editing: Keenetic (Android) - beta version of the new application for managing routers Keenetic

[alexey65536]

That's not good that the mode switch is not drowned, but sticks out. Easy to hook.

[Bartd]

Accidentally do not hook. The switch is very low and switches with some force.

[enpa]

Stable unofficial firmware version2.10.C.2.0-4 dated 01.15.2018for Lite KN-1310

Component kit

base
chilli
cloud
cloudcontrol
components
config-ap
config-client
config-repeater
corewireless
ddns
dhcpd
dpi
easyconfig
eoip
gre
igmp
interface-extras
ipip
ipsec
kabinet
l2tp
miniupnpd
nathelper-ftp
nathelper-h323
nathelper-pptp
nathelper-rtsp
nathelper-sip
ntced
openvpn
pingcheck
ppe
ppp
pppoe
pptp
skydns
trafficcontrol
tunnel
vpnserver
ydns

Changes

Version 2.10.C.2.0-4:

• Wi-Fi: Band Steering defaults to passive mode - without sending a forced DEAUTH client
  
• Wi-Fi: Fixed desynchronization of the Band Steering tables after the timeout expired, which led to the client being locked
  
• Wi-Fi: Fixed shutting down client isolation when adding an additional access point to a segment
  
• Wi-Fi: fixed the passage of multicast and broadcast packets between clients of one access point when isolation is turned on
  
• Wi-Fi: fixed a possible reason for blocking BBP with the termination of the distribution of beacons for 10-15 seconds

(c)https://forum.keenetic.net/

Keenetic Lite_KN-1310_2.10.C.2.0-4.bin.zip(6.77 MB)

Mirror:
cloud.mail - 2.10.C.2.0-4 Firmware Keenetic
yandex.disk - 2.10.C.2.0-4 Firmware Keenetic

[enpa]

Official beta firmware version2.11.B.1.0-0 dated 02.22.2018for Lite KN-1310

Component kit

base
easyconfig
corewireless
config-ap
ppp
config-client
ydns
pppoe
ppe
skydns
pptp
config-repeater
dhcpd
l2tp
igmp
dot1x
miniupnpd
kabinet
cloud
angular-ndw
cloudcontrol
pingcheck
trafficcontrol
ddns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes

Version 2.11.B.1.0-0 (official beta *):

• Fixed deadlock in hw_nat when deleting PPP interface
  
• fixed bug with broken flow control on WAN MDI and SFP ports KN-1010
  
• Improved the performance of the ISP Giga III interface when the flow-control is disabled by the provider
  
• Fixed the operation of the E3272s-210 HiLink modem in RNDIS mode
  
• fixed PPTP GRE processing with ppe software enabled
  
• replaced the kernel network stack discipline from pfifo_fast to fq_codel (with BQL), providing minimal latency under load
  
• corrected session breaks in the DHCP client "rebind" handler
  
• Wi-Fi: Band Steering defaults to passive mode - without sending a forced DEAUTH client
  
• Wi-Fi: fixed WPS button operation with Band Steering
  
• Wi-Fi: Fixed desynchronization of the Band Steering tables after the timeout expired, which led to the client being locked
  
• Wi-Fi: Fixed shutting down client isolation when adding an additional access point to a segment
  
• Wi-Fi: fixed the passage of multicast and broadcast packets between clients of one access point when isolation is turned on
  
• Wi-Fi: fixed a possible reason for blocking BBP with the termination of the distribution of beacons for 10-15 seconds
  
• Wi-Fi: added display of open networks in site-survey (KN-1010)
  
• Wi-Fi: fixed reboot with double deletion of STA record, prone to Giga (KN-1010)
  
• Wi-Fi: fixed possible deadlock system, subject to Keenetic Giga III, Ultra II, Air, Extra
  
• Wi-Fi: fixed bug with 2-way / 4-way handshake (GTK / PTK), all mt7628 models are affected
  
• Wi-Fi: added Reason logging for DEAUTH and DEASSOC events
  
• DNS: Enables the use of provider's servers for non-filtered Yandex.DNS and Norton hosts.
  
• Netflow: fixed launch of flow-export on hotplug interfaces (reported by @feoser)
  
• Transmission: added ability to get Magnet links
  
• Web (beta): added CIFS and AFP setting
  
• Web (beta): added support for access point, adapter and repeater modes
  
• Web (beta): added segment management in access point mode
  
• Web (beta): English added
  
• Web (beta): fixed scrolling on high resolution screens
  
• Web (beta): added current status next to IPoE, PPP sections
  
• Web (beta): Added a list of 3G profiles in UsbModem connection settings
  
• Web (beta): added directory access control
  
• Web (beta): added support for 6in4 connections
  
• Web (beta): added support for Keenetic Plus DECT
  
• Web (beta): updated file browser component

* Officially released for Keenetic Giga (KN-1010), Start (KN-1110), 4G (KN-1210), Lite (KN-1310), Start II, Lite III rev.B, 4G III rev.B, Giga III , Ultra II, Air and Extra II.
Rebuilt into delta for Keenetic II, III, Giga II, Ultra, Lite II, Lite III, 4G III, Omni, Omni II, Viva, Extra, DSL, VOX and LTE.

(with)https://forum.keenetic.net/

Installation process and debug mode

1. Download firmware version 2.11.B.1.0-0
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.11.B.1.0-0 you have problems, you will need to do the following:

1. Disable disable all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all the devices from the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Keenetic Lite_KN-1310_2.11.B.1.0-0.bin.zip(6.05 MB)

Mirror:
cloud.mail - v2.04-v2.12 (Test, Beta Firmware) All Keenetic
yandex.disk - v2.04-v2.12 (Test, Beta Firmware) All Keenetic

[evgen11113]

Who bought much different from keenetic lite iii rev B?
Or is it in another wrapper?

Post has been editedevgen11113 - 27.02.18, 12:45

[enpa]

evgen11113,

Lite III rev B

The processor - MT7628N 575 MHz
RAM - 64 MB DDR2
Flash memory - 8 MB
Wi-Fi Class - WiSoC 2T2R / 300Mbps (2.4GHz)
Antennas - 2 x 5 dBi
Ethernet ports - 5 x 100 Mbps
Wi-Fi / WPS Button - Yes
Modes of access point, amplifier, adapter - Yes, with a switch on the case

characterized by the fact that in the new model there are "printed antennas" and the reception signal will be better.

[enpa]

Stable firmware version2.11.C.0.0-1 dated 03/05/2018for Lite KN-1310

Component kit

easyconfig
base
ppp
corewireless
config-ap
pppoe
ydns
config-client
pptp
ppe
skydns
config-repeater
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
angular-ndw
cloud
cloudcontrol
pingcheck
trafficcontrol
ddns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes

Version 2.11.C.0.0-1 (official release *):

• restored compatibility with NordVPN
  
• fixed change of priorities of connections at boot
  
• IPsec: improved connection stability, fixed removal of CHILD_SA
  
• CIFS: fixed buffer overflow and process restart when writing in large blocks
  
• CIFS: fixed Unix directory permissions
  
• CIFS: fixed calculation of the volume of network drives with long names
  
• CIFS: Fixed flags in NetBIOS Registration Requests
  
• CIFS: Keenetic NetBIOS detection fixed, for example, using NetBScanner
  
• CIFS: Fixed work with WD TV Live

* Officially released for Keenetic Giga (KN-1010), Start (KN-1110), 4G (KN-1210), Lite (KN-1310), Start II, Lite III rev.B, 4G III rev.B, Giga III , Ultra II, Air and Extra II.
(c)https://forum.keenetic.net/

Installation process and debug mode

1. Download firmware version 2.11.C.0.0-1
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.11.C.0.0-1 there are problems, you will need to do the following:

1. Disable disable all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all the devices from the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Keenetic Lite_KN-1310_2.11.C.0.0-1.zip(6.05 MB)

Mirror:
cloud.mail - v2.04-v2.11 Firmware Keenetic
yandex.disk - v2.04-v2.11 Firmware Keenetic

[Docent_75RU]

Good time to all! I found the same router (in the sense of Kinetics), which is configured on Rostelecom Internet and iptv with the presence of the function of parental control and work on a schedule. But even here, not without the "fly in the ointment": it cuts the speed when connecting to the provider directly (iptv hangs, the Internet speed drops from 75 to 3), if you connect this problem to the router successively NO! Are there any solutions to this problem? I do not want to depend on the whim of the provider.

Post has been editedDocent_75RU - 18.03.18, 11:03

[enpa]

Stable firmware version2.11.C.1.0-2 dated 04.04.2018for KN-1310

Component kit

easyconfig
base
config-ap
corewireless
ppp
config-client
ydns
pppoe
skydns
pptp
config-repeater
ppe
l2tp
dhcpd
igmp
dot1x
kabinet
miniupnpd
cloud
angular-ndw
cloudcontrol
pingcheck
trafficcontrol
ddns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes

Version 2.11.C.1

Available for: Keenetic Start II, Keenetic Lite III rev.B., Keenetic Start (KN-1110), Keenetic Air, Keenetic Lite (KN-1310), Keenetic City (KN-1510), Keenetic Air (KN-1610),

New features and other improvements:

• Fixed possible errors in the work of Internet Filters

(c)http://service.ndmsystems.com/

Installation process and debug mode

1. Download firmware version 2.11.C.1.0-2
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.11.C.1.0-2 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Keenetic Lite_KN-1310_2.11.C.1.0-2.zip(6.1 MB)

Mirror:
cloud.mail - v2.04-v2.11 Firmware Keenetic
yandex.disk - v2.04-v2.11 Firmware Keenetic

[enpa]

Official beta firmware version2.12.B.0.0-0 dated 05.23.2018for KN-1310

<Starting with firmware version 2.12, the old web interface has been removed. >

Component kit

base
easyconfig
config-ap
corewireless
ppp
config-client
pppoe
ydns
config-repeater
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
pingcheck
trafficcontrol
nortondns
ddns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

New WebUI Screenshots

Changes

Version 2.12.B.0.0-0 (official beta *):

Available for: Keenetic Air, Keenetic Start II, Keenetic Lite III rev.B., Keenetic Start (KN-1110), Keenetic Lite (KN-1310), Keenetic City (KN-1510), Keenetic Air (KN-1610),

New features and other improvements:

• Changed web interface design
• Added the ability to select the default route for hosts and home network segments (Policy Based Routing)
• SSTP server and client added
• Added SSH server
• AdGuard DNS filter added.
• Added support for ARP Proxy on L2TP / IPsec and SSTP server
• Improved Wi-Fi performance
• SIP: SIP ALG port setting added
• IPsec: improved connection stability
• IPv6: added ability to set home host access rules over TCP / UDP
(with)http://service.ndmsystems.com/changelog.html

Installation process and debug mode

1. Download firmware version 2.12.B.0.0-0
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.12.B.0.0-0 there are problems, you will need to do the following:

1. Disable disable all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all the devices from the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Keenetic Lite_KN-1310_2.12.B.0.0-0.zip(5.75 MB)

Mirror:
cloud.mail - v2.04-v2.12 (Test, Beta Firmware) All Keenetic
yandex.disk - v2.04-v2.12 (Test, Beta Firmware) All Keenetic

[enpa]

Official beta firmware version2.12.B.0.0-2 of 05/31/2018for KN-1310

<Starting with firmware version 2.12, the old web interface has been removed. >

Component kit

base
easyconfig
config-ap
corewireless
ppp
config-client
pppoe
ydns
config-repeater
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
pingcheck
trafficcontrol
nortondns
ddns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes

Version 2.12.B.0.0-2 (official beta *):

Available for: Keenetic 4G III rev.B., Keenetic 4G (KN-1210), Keenetic Air II, Keenetic Start II, Keenetic Lite III rev.B, Keenetic Start (KN-1110), Keenetic Lite (KN-1310), Keenetic City (KN-1510), Keenetic Air (KN-1610),

New features and other improvements:
• A number of fixes and improvements in the user interface on the pages "Users"
• Also reduced the load on the processor of the Internet center, created by the work of the web interface
• Fixed co-operation of the PingChecker service with OpenVPN
• Fixed access to web applications on the home network via KeenDNS in SSL mode
(with)http://service.ndmsystems.com/changelog.html

Installation process and debug mode

1. Download firmware version 2.12.B.0.0-2
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.12.B.0.0-2 there are problems, you will need to do the following:

1. Disable disable all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all the devices from the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Keenetic Lite_KN-1310_2.12.B.0.0-2.zip(5.76 MB)

Mirror:
cloud.mail - v2.04-v2.12 (Test, Beta Firmware) All Keenetic
yandex.disk - v2.04-v2.12 (Test, Beta Firmware) All Keenetic

[jackcross]

Hello. One antenna interferes, can it be removed carefully?

[enpa]

jackcrossantennas built-in, you can remove the antenna, if only "with the root."

[enpa]

Stable firmware version2.12.C.1.0-3 dated 08.08.2018for KN-1310

Component kit

base
easyconfig
config-ap
corewireless
ppp
config-client
pppoe
ydns
config-repeater
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
pingcheck
trafficcontrol
nortondns
ddns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes

Version 2.12.C.1

Available for: Keenetic 4G III rev.B., Keenetic 4G (KN-1210), Keenetic Air II, Keenetic Start II, Keenetic Lite III rev.B, Keenetic Start (KN-1110), Keenetic Lite (KN-1310), Keenetic City (KN-1510), Keenetic Air (KN-1610),

New features and other improvements:
• Added work schedule selection for VPN tunnels and modems
• Fixed error updating the KeenDNS IP address in direct access mode for PPP connections
• Fixed problem with reconnection OpenVPN
• Fixed possible authentication error through the web interface.
• Fixed loading page "Other connections"
• Fixed registration of home network devices by MAC address
• Fixed the layout of the "Wi-Fi Clients" page in the "Access Point" and "Amplifier" modes
• Fixed display of mobile application clients
• Fixed the size of the log window on a mobile device

(c)http://service.ndmsystems.com/

Installation process and debug mode

1. Download firmware version 2.12.C.1.0-3
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.12.C.1.0-3 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Keenetic Lite_KN-1310_2.12.C.1.0-3.zip(6.04 MB)

Mirror:
cloud.mail - v2.04-v2.12 Firmware Keenetic
yandex.disk - v2.04-v2.12 Firmware Keenetic

Official beta firmware version2.13.B.0.0-0 of 08/30/2018for KN-1310

Component kit

base
easyconfig
config-ap
corewireless
ppp
config-client
pppoe
ydns
config-repeater
ppe
pptp
skydns
dhcpd
l2tp
dot1x
igmp
kabinet
miniupnpd
adguard-dns
cloud
cloudcontrol
pingcheck
trafficcontrol
nortondns
ddns
nathelper-ftp
nathelper-pptp
nathelper-rtsp
nathelper-sip
nathelper-h323
components

Changes

Version 2.13.B.0.0-0

Available for: Keenetic Air, Keenetic Start II, Keenetic Lite III rev.B., Keenetic Start (KN-1110), Keenetic Lite (KN-1310), Keenetic City (KN-1510), Keenetic Air (KN-1610),

New features and other improvements:
• Implemented access to the device via backup connections
• Fixed TTL fix on outgoing packets
• Web: changed the menu design on the main page
• Web: added option for additional Multicast VLAN and additional PVC for IPTV
• Web: improved adaptive layout for small screens
• Web: fixed bugs
• Wi-Fi: implemented MAC-Repeater mode without translating MAC addresses
• Wi-Fi: support for MAC ACL access lists on segments
• Wi-Fi: support for 802.11k / r in manual configuration mode
• Wi-Fi: support for SSID encoded in UTF-8
• IPv6: Yandex.DNS support implemented
• SSTP: Anonymous-DH mode added for compatibility with non-certificate SSTP servers
• L2TP / IPsec server: fixed adding routes through remote clients
• L2TP / IPsec client: shortened the minimum PSK length to three

(c)http://service.ndmsystems.com/

Installation process and debug mode

1. Download firmware version 2.13.B.0.0-0
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.13.B.0.0-0 you have problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disablesdebug mode.
6. We send debug self-test fileofficial technical support.

Keenetic Lite_KN-1310_2.13.B.0.0-0.zip(6.03 MB)

Mirror:
cloud.mail - v2.04-v2.13 (Test, Beta Firmware) All Keenetic
yandex.disk - v2.04-v2.13 (Test, Beta Firmware) All Keenetic

Post has been editedenpa - 03.09.18, 19:15

[MACTEPnew]

Greetings to all experts.
And I ask you to advise, take me this model or is it worth while to take the old line of Zyxel Keenetic Lite III? I'm not a pro, from the descriptions in the shops did not see the difference. For the "basement" firms, it is characteristic that the updated models of tested devices are often crap. But what about Keenetic? Now the price of the old and the new floats within 5% relative to each other. But apparently, the remnants of the old are already melting. Should you chase after the rest or decide on a new one, maybe raw?
And yes, is there a difference between KN-1310 and KN-1310-01? In one price list, they stand side by side, but with prices of 2100 and 1700, respectively.
Of the tasks: just a home router on native firmware (well, if possible) for 24/7 Wifi webcam surveillance (in the foreseeable future - with the connection of the recorder) plus 4-5 mobile devices and laptops for surfing and torrents. Now there is an old 4G II, but after two walls to the camera almost does not finish.

Post has been editedMACTEPnew - 07.09.18, 13:41

[_mad_]

MACTEPnew,
definitely better than new.
There is no dampness - the kinetic firmware is developing in the same way, and for the new model, three more will arrive.
In the gland, amplifiers of reception were added - it just helps if the signal from the webcam is already weak reaches the router.

[MACTEPnew]

_mad_,I am just confused by the fact that the Zyxel inscription was removed - that is, it is another company that produces iron (if this has not happened before).
And yes, is there a difference between KN-1310 and KN-1310-01, not in the know?

[enpa]

MACTEPnew,I recommend to read that there were no suchNot reallyquestions -Keenetic Company History.

[_mad_]

MACTEPnew,
I know that while kn-1310 is in one single form, and additional figures from some frightened attributed to a particular store where you looked)
perhaps, after some time there will be a new lite with another code like 1311 or 1310-02 - well, how was light II, and then light III)

[enpa]

MACTEPnew @ 09/07/18 09:24

KN-1310 and KN-1310-01

No difference.

Model:KN-1310
Part Number:KN-1310-01RU

And so, and so - right!

Post has been editedenpa - 07.09.18, 16:02