[X]Assistant

[Mak76simka]

ZTE Nubia Z17 - Firmware
NX563J
Description | Discussion пїЅ | Purchase пїЅ | Firmware пїЅ | Owners Club пїЅ | NubiaUI Themes пїЅ | Modifications and decorations пїЅ

Important information! Be sure to read!

• Any actions to prepare for a flashing and / or flashing of a smartphone are preferably done with a battery charge of at least 50%.
  
• Before you make a backup or reflash the phone, it is recommended to remove all types of locks (finger, pin, password, etc.).
  
• Everything you do is at your own risk!
  
• The authors of manuals and firmware are not responsible for the wrong actions of the owners!
  
• Attention! Before installing the firmware, it is strongly recommended to make a backup copy of the current firmware version and IMEI!
  
• Also, for convenient and correct perception by the community, info about the current firmware can be fixed in the signature of your profile, like this:
  FIRMWARE, "such a version." Root or not Root. Established: "Side patch". "Such a mod."
  
• The topic does not discuss the release of firmware

Drivers and Utilities

Current Nubia Z17 driver

Nubia Driver.zip(10.5 MB)

• Utilities for working with firmware

Firmware

Official firmware

• NubiaUI 6 v6.10 Android 9
  
• Official Nubia firmware

Based on official

• NubiaUI by EDAStudio

Unofficial firmware

• Lineage 15.1
  
• Lineage 14 Unofficial
  
• Resurrection Remix OS
  
• Mokee
  
• MIUI 9 xiaomi.eu 9.2.4
  
• miui.pro 7.11.30
  

• Service firmware

Instructions

• Current IMEI / MEID Repair Guide
  
• Issuance of permissions to Google services for reading SMS, without having root rights
  
• User manual for installing firmware 4.xx and root rights
  
• IMEI repair instructions (Warning)
  
• Instructions for installing firmware based on Project Treble
  
• Instructions for installing TWRP and installing firmware based on NubiaUI 5. **
  
• Instructions for installing unofficial firmware
  
• Editing EFS / QCN backup with your IMEI and MEID(Warning)
  
• Instructions for the restoration of "brick"
  
• Resetting unlock counter or FASTBOOT UNLOCK COUNT
  
• Remove Chinese characters in standard dialer
  
• Installing root on NubiaUI 5. **
  
• How to add stabilization to the stock camera
  
• We include support for the second camera module on custom firmware
  

Recovery

• TWRP for Mokee on Android Pie
  
• The most current version of TWRP
  
• TWRP with Project Treble support + instruction
  
• NFound's Newest TWRP with Project Treble (Vendor) Support
  

miscellanea

• Recover all types of locks
  
• Translation of system applications for NubiaUI versions 5. **
  
• Remove the "distort"
  

Irrelevant

• Installing root on NubiaUI 5. ** (old way)
  
• Modems from old firmware
  
• Configuring Notifications for NubiaUI V3.08
  
• Translated stock applications for NubiaUI based on Android 7
  
• Old hat
  

History of changes caps

• 22.03.2019 —Connection of the second module
  
• 19.02.2019- TWRP for Mokee Android 9
  
• 04.02.2019- Recover locks
  
• 13.01.2019- Instructions for the restoration of IMEI / MEID
  
• 06.01.2019- NubiaUI Themes
  
• 05.01.2019- Remove the "distort"
  
• 20.12.2018- Added instructions for installing service firmware
  
• 09.12.2018- Added new instructions
  
• 05.12.2018- Added club
  
• 05.11.2018- Added firmware Lineage 15.1
  
• 17.09.2018- How to add stabilization to the drain chamber
  
• 04.09.2018- Installation Instructions Treble
  
• 02.09.2018- Added new TWRP from NFound
  
• 30.08.2018- Added TWRP with Project Treble support
  
• 23.08.2018- Root on NubiaUI 5. **
  
• 21.08.2018- It is resulted in the standard of section
  
• 14.08.2018- Minor fixes
  
• 13.08.2018- Writing caps from scratch

Topics Curator - Orinicol



Post has been editedOrinicol - 16.04.19, 09:08

Reason for editing: Updating headers

[gerdim]

Artebell, Yes, I did not decide it, did not work, then it is not necessary, put miuipro. I felt, then rr5.8.5, then mokee and returned to 4.06. Everything happened during the day;)

If it were not for 4.06, I would have stayed on rr5.8.5 or miuipro (which is not exactly known, it was necessary to feel longer).



Post has been editedgerdim - 23.01.18, 19:52

[Artebell]

gerdim
It turns out 4.06 most norms, just need to clean the Chinese ?? !!!

Posted on 1/23/2018 7:57 pm:

Maks-Mix.,
Tell me please, but in firmware 4.06 you wrote a bug with Wi-fi, did you not fix it ???

[gerdim]

Artebellas for me, yes, if you don’t need android pay and it doesn’t scare that sometimes the play market is undermined, but it works.

I cleaned the Chinese one that is deleted without the superuser's rights, the rest is folded in the daddy. Almost everything is removed in three minutes by dragging and dropping into the basket.

Put full_gapps.

It will be necessary to transfer applications from which notifications are needed to the system / app.

You can remove Chinese characters from the dialer.

Post has been editedgerdim - 23.01.18, 20:05

[Artebell]

gerdim
But how to put gapps from the recovery ???
I want to put 4.06 from Makx-Mix, there seems to be already removed Chinese, but it seems like wi-fi is lame.

[gerdim]

Artebell, yes, from himself, namely full. If wifi is lame, then it's easier to delete the applications yourself (then delete them ...).

[well58]

Gerdim @ 01/23/18, 19:45

Put, sims with wifi did not work

Oh, how ... and I just had 5.8.4 normally set, that after full wipes, which is 4.02 .. but 5.8.5 - this one should only be put on the drain, for neither simok, nor wifi .... (tried several times, if that). Now I'm sitting on 4.06 by arceoxis & Fransua1981 - quite a good one. Here are just hieroglyphs from the dialer to remove.

[gerdim]

We clear the dialer from the Chinese characters:

0. Most likely everything is already with the root (if not, then you can delete it via twrp explorer or put the root);
1. Open the explorer folder: system / etc /;
2. Find and delete the file: mobilenuminmainlan.db;
3. Reboot;
4. Clear the call history.
4.1. We try to dial the number and look at the call history :).

Continued ...

Delete folder:TP_YulorePage_v1.0.0
system / app / path
prompts Chinese numbers



Post has been editedgerdim - 30.06.18, 21:45

Reason for editing: raised in the topic header.

[Artebell]

well58,
and can be a reference to 4.06 by arceoxis & Fransua1981 ???

[well58]

ArteBell @ 01/23/18, 20:21

and can be a reference

can.

perezalil several firmware on I-Disk
NX563J-update-ROMV306stock without edits
NX563J v3.08 by arceoxis & Fransua1981
NX563J_402-updatestock without edits
NX563J v4.06 by arceoxis & Fransua1981
NX563J_406-updatestock without edits

Post has been editedwell58 - 23.01.18, 20:35

[flashcon]

Tell me in which firmware Google services work fine and chrome, as well as NFC?

[Mak76simka]

пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ ZTE Nubia Z17

download

: download:https://mega.nz/#!6wVW…B8BGf85h5QuWeprGO3a7qI

Download on PC by:

MEGAsyncSetup.exe(12.69 MB)

==================================================================================

FOR CRAFTS AND PORTERS!

Useful topic for review:Porting firmware to Qualcomm 200/210/400/410/600 / 6xx / 8xx / 820
And for those who wish to test their abilities in romodelii:Development and porting of GSI firmware

Utility for working with firmware + instructions:UR-Tool v1.0 UR-Tool + Prime ++ v1.0 + (1) .zip (10.61 MB)
(read on XDA)https: //forum.xda-deve…g-android-5-8-t3670763
Allows you to unpack udate.zip to the root directory, edit and zanova zapakovat in the image!
Video:https: //redirect.vigli…2Ffont%3E%3C%2Ffont%3E
(According to my observations, I note that for the correct operation of the utility I used a laptop with Windows 7 installed. Maximum X64bit + 8Gb of RAM. Java and Python installed!)


To repack boot / recovery.img under Windows:CarlivImageKitchen_Windows_v1.3 (2) .zip(6.29 MB)

Text editor:notepad_6.5.1-spaces.ru.zip(7.08 MB)

HEX editor:free-hex-editor-neo.exe(16.3 MB)

Archiver:7zip-spaces.ru.exe(1.52 MB)

Also a useful topic:В®Unpacker Kitchen for Android (UKA).
Still:Update Script Generate

=====================================================================================================================

POSSIBLE DONORS

for Porting firmware to our phone!
ZTE Nubia Z17S - Discussion
OnePlus 5 - Discussion
Nokia 8 - Discussion
Xiaomi Mi 6 - Discussion
Sony Xperia XZ Premium - Discussion
AGM X2 Max
HTC U11 - Discussion
LeEco Le Pro 4
Google Pixel 2 XL - Discussion
Asus ZenFone 4 Pro ZS551KL - Discussion
Razer Phone - Discussion
Development and porting of GSI-firmware (Post bullik01 # 71234056)

Post has been editedMak76simka - 07.04.19, 07:41

[Artebell]

How to clean the firmware from the Chinese?
Yesterday I installed a stock 4.06 - the market works, but a lot of Chinese.
In firmware 4.06 by arceoxis & Fransua1981 - the market and chrome did not work.
Clean-Mix_2_nx563j-Official - when installing, it fell into error 7.

[vitoss2013]

ArtebellI yesterday from Francois put 4.06 everything works there

Posted on 1/24/2018 09:28:

ArtebellChinese just delete in the basket. What is not deleted is put in a folder or put es explorer, turn on root explorer and delete

Post has been editedvitoss2013 - 24.01.18, 09:29

[Artebell]

vitoss2013,
And what firmware did you install on ??? I have runoff 2.44 may be in trouble?

[vitoss2013]

Artebell, I put on stock 4.06. And so usually I tear everything under clean and put
I smoked half a day yesterday and today is 4.06 from Francois, not happy ((
Akum eats not sickly, the device heats up the scribe, the notifications work crookedly in contrast to the drain. Apart from AR, I see nothing good in it! I will go back to stock 4.06.

[Artebell]

And what firmware did you have out of the box and what did not suit you?

[vitoss2013]

was 2.44, Akum also guzzled too much

[Artebell]

vitoss2013,
I have a buggy buggy, instead of one click, it perceives as five, the sound disappears and you just need to reboot, notifications do not come, in the cold it reboots itself, with the charge showing different each time when turned on, the applications crash.
Yesterday, when I put 4.06 in general, a completely different phone, but a lot of Chinese trash. I will put stock 4.06 and clean.

[gerdim]

ArteBell @ 01.24.18, 9:51

notifications do not come

Notifications themselves on 4.06 will not come either, you need to drag applications into the system / app / from which they are needed.

[vitoss2013]

gerdimyou don’t have to drag anything anywhere, you just need to set everything up correctly