[X]Assistant

[Mak76simka]

ZTE Nubia Z17 - Firmware
NX563J
Description | Discussion пїЅ | Purchase пїЅ | Firmware пїЅ | Owners Club пїЅ | NubiaUI Themes пїЅ | Modifications and decorations пїЅ

Important information! Be sure to read!

• Any actions to prepare for a flashing and / or flashing of a smartphone are preferably done with a battery charge of at least 50%.
  
• Before you make a backup or reflash the phone, it is recommended to remove all types of locks (finger, pin, password, etc.).
  
• Everything you do is at your own risk!
  
• The authors of manuals and firmware are not responsible for the wrong actions of the owners!
  
• Attention! Before installing the firmware, it is strongly recommended to make a backup copy of the current firmware version and IMEI!
  
• Also, for convenient and correct perception by the community, info about the current firmware can be fixed in the signature of your profile, like this:
  FIRMWARE, "such a version." Root or not Root. Established: "Side patch". "Such a mod."
  
• The topic does not discuss the release of firmware

Drivers and Utilities

Current Nubia Z17 driver

Nubia Driver.zip(10.5 MB)

• Utilities for working with firmware

Firmware

Official firmware

• NubiaUI 6 v6.10 Android 9
  
• Official Nubia firmware

Based on official

• NubiaUI by EDAStudio

Unofficial firmware

• Lineage 15.1
  
• Lineage 14 Unofficial
  
• Resurrection Remix OS
  
• Mokee
  
• MIUI 9 xiaomi.eu 9.2.4
  
• miui.pro 7.11.30
  

• Service firmware

Instructions

• Current IMEI / MEID Repair Guide
  
• Issuance of permissions to Google services for reading SMS, without having root rights
  
• User manual for installing firmware 4.xx and root rights
  
• IMEI repair instructions (Warning)
  
• Instructions for installing firmware based on Project Treble
  
• Instructions for installing TWRP and installing firmware based on NubiaUI 5. **
  
• Instructions for installing unofficial firmware
  
• Editing EFS / QCN backup with your IMEI and MEID(Warning)
  
• Instructions for the restoration of "brick"
  
• Resetting unlock counter or FASTBOOT UNLOCK COUNT
  
• Remove Chinese characters in standard dialer
  
• Installing root on NubiaUI 5. **
  
• How to add stabilization to the stock camera
  
• We include support for the second camera module on custom firmware
  

Recovery

• TWRP for Mokee on Android Pie
  
• The most current version of TWRP
  
• TWRP with Project Treble support + instruction
  
• NFound's Newest TWRP with Project Treble (Vendor) Support
  

miscellanea

• Recover all types of locks
  
• Translation of system applications for NubiaUI versions 5. **
  
• Remove the "distort"
  

Irrelevant

• Installing root on NubiaUI 5. ** (old way)
  
• Modems from old firmware
  
• Configuring Notifications for NubiaUI V3.08
  
• Translated stock applications for NubiaUI based on Android 7
  
• Old hat
  

History of changes caps

• 22.03.2019 —Connection of the second module
  
• 19.02.2019- TWRP for Mokee Android 9
  
• 04.02.2019- Recover locks
  
• 13.01.2019- Instructions for the restoration of IMEI / MEID
  
• 06.01.2019- NubiaUI Themes
  
• 05.01.2019- Remove the "distort"
  
• 20.12.2018- Added instructions for installing service firmware
  
• 09.12.2018- Added new instructions
  
• 05.12.2018- Added club
  
• 05.11.2018- Added firmware Lineage 15.1
  
• 17.09.2018- How to add stabilization to the drain chamber
  
• 04.09.2018- Installation Instructions Treble
  
• 02.09.2018- Added new TWRP from NFound
  
• 30.08.2018- Added TWRP with Project Treble support
  
• 23.08.2018- Root on NubiaUI 5. **
  
• 21.08.2018- It is resulted in the standard of section
  
• 14.08.2018- Minor fixes
  
• 13.08.2018- Writing caps from scratch

Topics Curator - Orinicol



Post has been editedOrinicol - 16.04.19, 09:08

Reason for editing: Updating headers

[brather82]

Attention! You perform this operation at your own risk. Administrationsavagemessiahzine.comand the authors of the instructions are not responsible for the actions of users.
You can disable the phone with incorrect actions without the possibility of recovery. Therefore, if you are not confident in your knowledge and skills, please do not do any of these instructions.
Translated TWRP firmware manualwithxda.

пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ. пїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅ "пїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ" пїЅ "пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ - пїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ", 7 пїЅпїЅпїЅ пїЅпїЅпїЅпїЅ пїЅпїЅ пїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅ (пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅ пїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅ). пїЅ пїЅпїЅпїЅпїЅ "пїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ" пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ (5-пїЅпїЅ пїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅпїЅ). download

Training. We will need:
1) The Nubia Z17 phone itself.
2) USB type-C cable for connecting the phone to the computer.
3) Computer with Windows OS and installed drivers for adb-fastboot mode (on the Internetfull of instructions).
4) You need to download and unpack to your computer archive Nubia Z17 Pack. You can download it here:1, 2.

Step-by-step instruction:
1) Download the archive with everything you need from the link above.
2) Unzip the contents of the archive into a folder.
3) Right-click on the folder after holding down the SHIFT key and in the context menu select "Open Powershell window here" or "Open command window" depending on the version of Windows.
Note: in the first variant you need to enter the command in the consolecmd .
4) Put the phone in modefastbootholding the volume down key and the power key simultaneously while the phone is switched off, and connect the phone to the computer.
5) In the console window, enter the commandfastboot devicesand if you have order with the drivers, then something like this should appearof this.
6) To unlock the bootloader, enter the following command in the consolefastboot oem nubia_unlock NUBIA_NX563J, now the bootloader is unlocked!
7) Enter the following command for TWRP firmwarefastboot flash recovery TWRP_recovery.img, now TWRP is flashed in return for stock recovery!
8) To reboot into the recovery, you must select the item with the volume buttonsreboot recovery"and press the power button to confirm.
And here we are waiting for a little problem, I do not know about you, but I do not know Chinese, so let'schange language.
9) On the first screen when loading recovery clickright buttonand choose a language from the list which one you like (I always advise English).
10) Now you can get root access by going toAdvanced>Toolsand pressRoot device.
Now you have an unlocked bootloader, TWRP and root custom recovery firmware!

Post has been editedAkella_MC - 23.01.18, 18:08

Reason for editing: In the header

[brather82]

Attention! You perform this operation at your own risk. Administrationsavagemessiahzine.comand the authors of the instructions are not responsible for the actions of users.
You can disable the phone with incorrect actions without the possibility of recovery. Therefore, if you are not confident in your knowledge and skills, please do not do any of these instructions.
Instructions for firmware ResurrectionRemix-N 5.8.4 withxda:
Before flashing, we check that the phone is sufficiently charged and not discharged during the flashing process. Well and nobody canceled backups, we save all necessary.
1) If you do not have a custom recovery installedTWRPthen install according to the instructions from thisfasting.
2) Download to computerfirmware, patchandgapps.
Note. On the site with gapps platform chooseARM64, Android: 7.1And the necessary Google application pack.
3) Copy the downloaded archives to the root of the disk on the phone.
4) Boot into the recovery, check that the firmware, patch and gapps files are in place.
5) go to sectionWipe - Advanced wipesand tick oppositeSystem, Data, CacheandART / Dalvik Cache.
Attention!In no case, do not select the internal storage section for wipe - because you will lose the files for the firmware and you will have to sculpt the OTG flash drive.
6) go to sectionInstalland alternately flash the firmware file, patch (removeapps5.8.4.zip), gapps.
7) Reboot into the system, wait a few minutes for the first boot, set up the phone and enjoy the result.
Feedback forumchanin firmware readhereor in the original topic onxda.
UPD. Magisk can not be updated, otherwise you will get an infinite download, so either turn off checking new versions orread the topic description how to flash another version of recoverywhere update magisk through recovery works.
UPD.2When trying to roll this firmware onStock ROM Nubia UI 5.0 v3.08 the radio module does not work and the sims are not detected. Therefore, it seems necessary to flash from a different version. If you still have time to flash and SIM cards are not displayed, then just change the firmware based on the drain and try to upgrade to RR from another firmware version.

Screenshots of the installed system.

Attached images

Post has been editedAkella_MC - 23.01.18, 18:08

Reason for editing: In the header

[SpyceR_Lviv]

OnxdaThe user added 2.54 Gapps, Magisk firmware to the stock and removed the Chinese garbage.
Downloadhere.

I did not use it myself, so put at your own risk.

1. Go to the recovery
2. Make wipe data, cache, dalvik
3. Install the firmware
4. Boot into the system

Post has been editedAkella_MC - 23.01.18, 18:09

Reason for editing: In the header

[DeathRuNNeR]

Seraish @ 09/01/2017, 11:46

Any ideas how to resurrect the ZTE camera in the RR firmware after reinstalling?

Settings-applications-camera-help at the top remove updates ...

Post has been editedgrafom - 03.09.17, 18:12

Reason for editing: In the header

[Couterize]

DeathRuNNeR @ 09/17/17, 12:24

After installing RR magic and gaps, magic asked to upgrade to version 14, I gave it a go, but after rebooting, the phone did not start, I had to reinstall it again. Maybe as it is treated differently, but I did not succeed now, I just refuse to update, but the offer pops up once a day, I just remove it and that's it. Who had this and how to solve the problem. In order for the bluetooth headphones to work, I installed a bluetooht audio widget fri through it, I launch the bluetooth headphones while it seems to be working

The solution has already been discussed in this thread here:ZTE Nubia Z17 - Discussion (Post seraish # 64784660)
Only in post link is broken (ellipsis instead of characters). You need to take the download link from the post on xda:https: //forum.xda-deve...=73696276&postcount=99
The bottom line is that you need to install a new recovery with the ability to enable the Verified BootSigner feature. Exe-shnik on the link from the post on xda offers to install a new recovery in one of 3 ways and enable this feature.
Direct link to exe-shnik:https: //drive.google.c...OPQWpTODlUb2ZxYmM/view
In the running exe-shnik I chose method 3 - via fastboot. Everything is working.

Yesterday, I still suffered from Android Pay - I always got an error about “you have root access or unlocked bootloader”, although the magisk is worth, hiding the root-a from Android Pay is enabled. Sberbank-online is fully operational.
In order for Android Pay to work, you need to flash through safetynet-fix for Magisk via recovery:universal-safetynet-fix-v2-beta-5.zip(2.5 MB)


Post has been editedAkella_MC - 23.01.18, 18:13

Reason for editing: In the header

[gutfresh]

MoKee official builds here -Klats

Post has been editedAkella_MC - 23.01.18, 18:09

Reason for editing: In the header

[mastersmit]

Nubia UI 5.0 v3.08 + GApps + Magisk
Mega Gdrive YaDisk

Make wipe dates, cache, dalwik.
Flash
Restart.

To work without problems Android Pay / Sberbank / other putUniversal SafetyNet Fix module.

Original source

Post has been editedAkella_MC - 23.01.18, 18:10

Reason for editing: In the header

[voland663]

Apparently the correct settings of the applications themselves solve the problem.

To set up notifications for stock 3.08 with gapps, I used the following techniques:

1. Lock on the application (open the application manager and swipe down on the desired application)

2. Work at NeoSafe:
пїЅпїЅпїЅпїЅResolution:
a) Auto Start Control ->choosing the right applications

b) Application permissions ->Application ->Select the desired application ->Main class (draw at the top: allow; Background start activity: allow; LockScreen display windows: allow)
Notification category (draw above: allow)

пїЅпїЅпїЅпїЅEnergy Saving:
Application power managment ->Select the desired application ->choose the item Regardless of control
We include the item Background cleanup protection (in theory, this item should put a lock on the application in the controller, but I did not observe this)

3. On the curtain without any notifications, we poke in the Notification Manager ->Third-party apps ->choose the right application ->choose the types of alerts that interest us.

4. Configure the program's notifications (for Gmail, for example, Settings->tyk in account name, checkbox on Alerts, tyk in "Ring and Vibrate", checkbox on "Alert for this label", checkbox on "Alert about each message").

5. My phone ignores the setting "Wifi in sleep mode: do not turn off", so in any application that supports it, you must check or select the "always connected" option. Perhaps this setting makes ignore the enabled option "WLAN power saving mode".

After such manipulations, I receive all notifications (at least sound, because some applications do not show pop-up notifications, although, in theory, they should).

Post has been editednonlocal - 31.10.17, 19:52

Reason for editing: In the hat!

[mastersmit]

Meow 9 beta on the way
NFC and Gapps do not work (

But in any case, we are silently sawing :)

Post has been editedAkella_MC - 23.01.18, 18:20

Reason for editing: In the header

[mastersmit]

RessurectionRemix v5.8.5
(Nov 2, 2017, beta)

Download:Mega, YaDisk, GDrive(675 MB)

Changes are not known.

After installing the firmware to remove some Chinese programs, install the archiveRemoveApps. And put Gapps (any suitable from pico to full). Next, through any Explorer with root support (ES Explorer, Root browser, etc), delete the remaining Chinese programs (they are with hieroglyphs) from the system \ priv-app folder. After the reboot, you get a clean custom with root.

When installed on the drain to avoid the lack of have -PLAY ONLY OVER 3.08+
When installing on custom to avoid the lack of have -POSITION ONLY ON CONDITION THAT THE CAST WAS DELIVERED ON 3.08+
If these conditions were not met and you still have lost - put the stock 3.08-4.06 and further RR.

Post has been editedAkella_MC - 23.01.18, 18:16

Reason for editing: in the header

[DeathRuNNeR]

Has anyone already set this subject?Gizrom
xda has very good reviews from one user, says that the speed of work is comparable to RR and the Russian is present and the gaps and notifications seem to come

Post has been editedAkella_MC - 23.01.18, 18:17

Reason for editing: In the header

[Sho0oT]

MIUI 9

Description: Custom miui9 firmware for ZTE Nubia Z17
Authorship: Xi Yan XY - base,MIUIPRO- tasty bunsextremalex- connected the first with the second and will update and finish,Zver_sky- tester, without which this mod would not be

Installation

Flash through TWRP with a preliminary Data wipe, provided that you switch from another custom firmware or from a drain. When switching from the previous version of MIUI PRO, no wipes are needed.
P.S .: SuperSu is built in!Magisk'a not in the firmware, if necessary, then delete the folder in the firmware"META-INF / com / mp / miui_pro_root"and after installing the firmware set magic.

Screenshots

Log

09/27/17 - the first version

Known issues:

- The camera does not start with lock mode
- Some menu items do not work
- NFC does not work
- Awakening with a double tap on the screen from the settings does not work and will not work natively. We will look for a crutch. (while you can choose an alternative in the playmarket for yourself)
- Problems with BT communication are likely

Buns

- Sound:Viperfx | Dolby
- Camera:Gcam | Oneplus 5 | Camera MX | Open camera
- Xposed
- Catalog of themes MIUI v6 / v7 / v8 / v9

Download : MIUI PRO

Updates will no longer be:
- Mi6 is the base for the firmware, it is transferred to Oreo, nothing new can be crafted.
- XY author of the firmware "banned" to cut at its base.
- I do not have a smartphone to try to fix troubles.

If you want to continue ...

Post has been editedAkella_MC - 23.01.18, 18:18

Reason for editing: In the header

[axlaf]

spaik380,
There was a similar problem with the MIUI firmware - it is time to add the magisk to the firmware itself. Checked - the system started.
MIUI firmware from miuipro with built-in magisk instead of supersu
MIUI miuipro 7.11.30 with magisk

Post has been editedAkella_MC - 23.01.18, 18:19

Reason for editing: In the header

[qiyas25]

Before those who decide to install this firmware, we must make a backup.

ZTE Nubia Z17 - Discussion (Post qiyas25 # 68588925)

zte z17 NX563J 2.44official firmware global with google + services for unbrick

stitched only !!!QIFL
1) instruction !! 1 method !!!

1) install the driverhereor manual installationhere(diagnostic usb port and Qualcomm HS-USB QDLoader 9008)after that, if anyone has a problem with the certificate, we reboot the computer when the computer starts up, or if you hold the f8 button on the keyboard and disable the driver signature verification !!!
2) installQPTSI used this version!!! on old does not work only on fresh ones !!!
3) downloadmega yandiskUnzip the firmware and folder!! images !!we dump only ships Program Files (x86) \ Qualcomm \ QPST \ bin
4)open the start menu, find the QPST folder and find the QFIL in it, launch the program
5)in the QFIL window that opens, we take our port and go. Configuration gave fireHouse.
6) and for those who have a brick press the volume down at the same time the shutdown button should openfastbootthere you have to choose using the volume rocker!! boot to eload mode !!!The smartphone will be cut off. We do not panic while holding the volume button up and insert our usb cable and our smartphone is recognized as (Qualcomm HS-USB QDLoader 9008)
7)Who has a brick then we put on charging somewhere for an hour smartphone, then press the volume up and the button to turn off and hold the pack recognizes our smartphone computer(Qualcomm HS-USB QDLoader 9008)
8) after our patient is recognized in the QFIL window, transfer the selection toFlat build
9) Browse ... our folder for resuscitationProgram Files (x86) \ Qualcomm \ QPST \ bin \ imagesand there we chooseprog_ufs_firehose_8998_ddr.elf
10) go down and click onLoad XML ...in the opened window we takerawprogram0and alsopatch0and pushDownload if someone didn’t succeed, we don’t panic, it’s just the glitch of the QFIL program, we repeat point 6 again The blue slider may not go into the firmware process, but below it will display INFO information ...... then everything is OK !!!
!!! after the end we press the volume up and the shutdown button will appear in the log and go into the recovery menu and load normally!!!!
11) if someone didn’t do this and hung on the nubia log, then repeat item 6 and change only the rawprogram1 / 2/3/4/5 item only and also, accordingly, patch1 / 2/3/4/5 should be flashed everything in sequence without error! !! !! repeat step 6 after each procedure with a patch and Rav !!
12) who, after the firmware, has a problem with having or even rolling back backup?1null 2nulldelete all stripped then flashing (go to qfil / tools / partition manager delete all stripped and flashing service firmware, then roll back backup (qcn efs .....) if someone has no backup then youshipsor contact help !!!!

2) instruction !!2 method!!!

Here's another mui stitcher that can flash our smartphone with my flooded firmware !!!
!!! you can download it only with this version, you can check it yourself, you can use this method or GFД°L from qualcomm (GUYS BEFORE MANIPULATIONS WITH A SMARTPHONE BECAPNITY QCN !!!) Because your firmware is configured with a smartphone on a Chinese locked operator, and this will cost you time to restore it !!! and therefore be sure to make a QCN back !!!, you can do it with the help of Qfil))) or ZTE Nubia Z17 - Discussion (Post qiyas25 # 68588925) so quickly
here is a full instruction but do not forget to backup QCN !!!
(1 nubia Z17 should be off
(2) Press the volume button and the power button simultaneously enter the fastboot mode.
(3) Volume buttons Press to select the "download edload", then press the "power" button to confirm, finally, enter "9008 mode"
(4) Connect Nubia Z17 using a USB cable to the computer
(5) MUi flash sethere
(6) After unpacking and installing mi Flash, complete (if you have a system security request, select allow to install), open MiFlash.EXE and click on Select then click on the refresh button, Mi flash automatically detects the phone, then click on FLASH to Start the INSTALLATION. (if you do not see our smartphone, then press the top button and the power button with the connected smartphone as you see, we release and do everything according to item 6)
(7) Wait for it to root successfully, the phone can reboot automatically.
(8) Finally step, the phone goes into "engineering mode" when you first reboot, you need to long press the power button, and then restart to enter this Andriod phone.

Post has been editedqiyas25 - 03.05.18, 13:05

Reason for editing: paragraph 11 added a detailed description!

[qiyas25]

who has problems with wifi all modemshere

Post has been editedqiyas25 - 10.02.18, 10:57

Reason for editing: Added to header

[qiyas25]

new TWRP 3.2.1: thank_you:for smartphone NX595J NX563J NX529 NX523 NX511 NX507 NX505language onlychinese and english
downloadmega here settingvia pc or recovery compatibility with ROM android - 8.0+ and the new design is very stable compared to TWRP 3.1

Attached images

Post has been editedqiyas25 - 12.02.18, 22:15

Reason for editing: In the header

[qiyas25]

so good time day guys: D

if someone has a problem, there is no network, it is not correct, and then this is for you!
QCN file is edited by me for you !! and I was grantedaxlafand therefore I am very grateful to him for his responsiveness and support and for his help;)
So
1) download the image of our QCN FAILhere
2) and a program for working with our imagehere
3) drag or open our QCN FAIL to HxD !! go to the search section and there will open a window
4) data type we takehexadecimal valueand below we take everywhere
We write this data for search and edit it on our own box.
5) IMEI ConverterWe throw it into this program and convert it and put it !! and we write the maid from the end and leave the letters A0 as it is !!
6)
0002E3F0IMEI1FF FF FF FF FF FF FF FF F1

00026B10IMEI2FF FF FF FF FF FF FF FF F2

00027BC0MEID11 11 11 11 11 11 A0changing two places !!!


6) and save the file, we will have two files !!! .bak and what we edited !!! (zte z17.bak remove the extensionbak zte z17.qcn must stay !!!) we check on our own everything has to correspond !!!
7) Download QPTS canhere
8) go to the start or where installed QPTS we find QFIL and open and connect our device and is recognized asdiagnostic usb portif not, then go to the settings, unlock the developer menu, and there we turn on debugging via usb and agree (we give the go-ahead with this pc)
9) in QFIL we take [b]toolsandQCN BACKUP RESTOREand we select our edited our qcn and press restore and the process should go after we reboot and enjoy: thank_you:

mac and bt do not need to change anything !!!

Post has been editedqiyas25 - 26.02.18, 09:45

Reason for editing: IMEI Converter, and maid correction

[gerdim]

Installing Magisk 15.3 at 4.06 after SuperSU.

It is necessary:
Recovery TWRP 3.2.1take here;
Magisk v15.3take here(copy to the root of the phone);
Magisk Manager v5.5.5take here.
links to Magisk took fromthis post.

1. Install TWRP 3.2.1 recovery, if it is, then skip it.Installation Instructions.;

2. Boot into the installed recovery. You must remove the SuperSU, go Advanced ->Glass Tools ->Uninstall Su swipe and then, after the SuperSU is removed, we do the wipe cache and dalwick cache. We return to the main recovery menu .;

3. Now install the Magisk itself. From the main menu, go to Install, select Magisk-v15.3.zip and click on Install Image. We are waiting for the end of the installation and return to the main menu .;

4. From the main menu, go to Advanced ->Glass Tools ->Verified BootSinger and swipe, exit recovery, reboot into system .;

5. Install Magisk Manager in the system - MagiskManager-v5.5.5.apk

Something like this....

Post has been editedAkella_MC - 23.01.18, 18:22

Reason for editing: In the hat!

[mastersmit]

Deodexing Result 1.06

Right Before, Left After

Now, the lack of space in the system section will certainly not sin :-D

Post has been editedmastersmit - 23.01.18, 06:55

[well58]

Mastersmit @ 01/23/18, 06:54

Now, the lack of space in the system section will certainly not sin

Yes, there (in the system section) bulk places! Under system 6 gigs allocated: