Rom93 ,

Thank you for your attention, my friend

37 New ConfigsWG

37 Confugs_WireGuard_Mazizith.zip(13.58 Kb)


Post has been editedmazizith - 25.05.18, 10:31

Oleggluk ,
The module is not enough. Definitely need kernel support. And here is ... one thread put on the core operating system on which no PF support this core ??? Do wakes robit?

Brick51,
No, the core is always enchanted by a particular axis.

Redmi 5+, 625 Snap. Firmware miuipro. The question I have been supporting in the nuclei WireGuard?

funtik95 , Why do not you ask in the theme of your smartphone?

yoreek ,
No, there is a core of specific telof custom bikes. Exchanged letters with developers, I will put the kernel with poddkrzhkoy flash kernel

And on this program many cases somebody profile with 1024 bit encryption? :-) not only Russian :-)

Posted 05/27/2018, 8:12:

And on this program many cases somebody profile with 1024 bit encryption? :-) not only Russian :-)

A new version:WireGuard_0.0.20180527.apk(5.3 MB)

What's new:
This is an alpha release, which contains support for both stock devices and custom WireGuard kernel enabled devices.

Changes between versions:
- The Android app itself:https://git.zx2c4.com/wireguard-android/log/
- If you're using an ordinary ROM:https://git.zx2c4.com/wireguard-go/log/
- If you're using a custom ROM with the kernel module:https://git.zx2c4.com/WireGuard/log/

Brick51 ,
And not prompt, where it is possible to look for custom kernel on a custom request and it is on your device? I saw the list of smartphones, whose core is already support this technology, but it is mainly the later models. But where on the old devaysa and custom firmware, you can dig up on the Old modified under the subject cores, I xs.

Piscander ,
Besideshttps: //forum.xda-deve...p=74667371&postcount=2, I know nothing. I do not think that now there is something else. There is a group in the cart.

Good afternoon! Can you explain how this client wireguard use? I downloaded the kernel with support, set magisk module, apk, gave Ruth threw Freestuff configuration, and no vpn icon, how do you know that wireguard Robit? And that there still need to be set?

Post has been editedBrick51 - 28.05.18, 23:36

Brick51 Ruth it is only required to transfer the apk wg in.
If properly implemented support wg, the VPN icon will not be, it somehow slyly work at the system level.
Just turn on the desired configuration, and all (well, of course, you can tweak the configuration itself, if you do not like, for example, or the port mtu).
A check at any speed tester is possible or just the browser type 'my ip address' if you will give some London, Canada .. whichever config included., It means that all the beam.

Oleggluk ,
Ok, ip changed to work, but do not use, then, android api

Post has been editedBrick51 - 28.05.18, 23:37

And who zhor a battery? After installing a subject noticed that the consumption has increased dramatically in the OS android and android system ...

A new version:WireGuard_0.0.20180529.apk(5.3 MB)

What's new:
This is an alpha release, which contains support for both stock devices and custom WireGuard kernel enabled devices.

Changes between versions:
- The Android app itself:https://git.zx2c4.com/wireguard-android/log/
- If you're using an ordinary ROM:https://git.zx2c4.com/wireguard-go/log/
- If you're using a custom ROM with the kernel module:https://git.zx2c4.com/WireGuard/log/

A new version:WireGuard_0.0.20180601.apk(5.31 MB)

What's new:
Changes between versions:
- The Android app itself:https://git.zx2c4.com/wireguard-android/log/
- If you're using an ordinary ROM:https://git.zx2c4.com/wireguard-go/log/
- If you're using a custom ROM with the kernel module:https://git.zx2c4.com/WireGuard/log/

Put wireguard Flash kernel with kernel with support for applications, battery consumption is very increased. Above said that without the support of the core speed is low. Here are returned to the stock kernel:



Post has been editedBrick51 - 03.06.18, 12:21

A new version:WireGuard_0.0.20180604.apk(6.12 MB)

What's new:
Changes between versions:
- The Android app itself:https://git.zx2c4.com/wireguard-android/log/
- If you're using an ordinary ROM:https://git.zx2c4.com/wireguard-go/log/
- If you're using a custom ROM with the kernel module:https://git.zx2c4.com/WireGuard/log/

A good program, but the installation profiles duratsky method :-) where and how to find these zips with profiles :-) who will fiddle with it

A new version:WireGuard_0.0.20180605.apk(6.12 MB)

What's new:
Changes between versions:
- The Android app itself:https://git.zx2c4.com/wireguard-android/log/
- If you're using an ordinary ROM:https://git.zx2c4.com/wireguard-go/log/
- If you're using a custom ROM with the kernel module:https://git.zx2c4.com/WireGuard/log/