Keenetic Giga (KN-1010) - Discussion | [wifirouter]
Instructions for use KN-1010.pdf
Keenetic Giga_KN-1010_2.10.B.1.0-2.bin.zipMilitary_medic @ 12/16/18, 17:09
IPsec in the home network. Channel itself set up set up, but I'm changing IP daily
Make via client-server option.
To implement the L2L, you need a white IP. Believe me, 150r, not the costs, ate it is really vital.
Vladr , So I have a white IP, but dynamic. The channel itself is not vital or related to work. All this is done solely from the point of view of general self-education. At one time, I used the built-in DYNDNS service on the Linksys router and the service itself is glory notification when changing IP.
Military_medic @ 12/16/18, 19:22
So I have a white IP, but dynamic.
I apologize. Incorrectly said. Need not just "white", namely static. It is bought from the provider for a penny.
Just the presence of a "public" address gives only the ability to use the service mentioned by you and others that are clogged in the router firmware, such as NO-IP, access the router and internal network resources from the outside domain name.
In this case, the tunnel will work perfectly in the client-2-LAN version, but not LAN-2-LAN. In the second case, that you want to implement, in the description of the tunnel, you must specify the IP address of the gateway explicitly.
Friends, do not be bad for a question, but is it worth overpaying for ultra version or not? The difference in price is 2500, but judging by the specification, iron is almost the same. Or all the same postpone?
Rupreht @ 16.12.18, 22:55
Is it worth overpaying for ultra version or not?
If you find a wifi client 4x4, then it is worth it. Giga has one MT7615DN controller for both bands, Ultra has two MT7615N controller (for each range). The rest of the iron and software are the same.
Post has been editedVladAsta - 16.12.18, 23:07
VladAsta , Sorry, I'm not greatly visible. I need a router for home network, mostly all customers (laptop, phones, tablets, TV), sit by 2.4. The apartment is not a small and router from the kitchen to the extreme room, it seems badly for 2.4, not to mention 5 GHz. And what kind of client should be 4x4? Do not quite understand.
Rupreht @ 12/17/18, 2:01
To the extreme room finishes badly and for 2.4, not to mention 5 GHz.
Under such communication conditions it is worth thinking about add. TD in the far room. Connect wire and not wifi repeater
military_medic, I will give you the Council of another kind. You bought a router, the price of which includes full technical support. No head of any forum compares with the knowledge base on the Keenetic support site. Similarly, if you ask a question there, it is necessary to answer it (and not, if desired), qualified engineers will answer, and will answer you until you call the appeal. Post has been editedIlya Khrupalov - 17.12.18, 13:05
Good day, there are those who managed to make friends this device with GPON Rostelecom via SFP connector?
Are there any suitable SFP-ONT terminals for this device.
In compatible there are ELTEX NTU-SFP-100 (GPON), will it take off?
In Rostelecom itself, nothing can be said about this, but they gave a list of officially supported terminals:
Are there any suitable SFP-ONT terminals for this device.
In compatible there are ELTEX NTU-SFP-100 (GPON), will it take off?
In Rostelecom itself, nothing can be said about this, but they gave a list of officially supported terminals:
- B-FOCUS 4G2PW
- Huawei HG8240 / HG8245
- Ericsson T073G, T063G
- ISKRATEL F50-F55
- ELTEX NTP-RG-1402
- ATPON RFT620.
- PSG-590.
- Qont-9-4G-2V-2W-1U
- Sercomm RV6699
- ZTE ZXHN F670.
military_medic, By the way, note that with the latest firmware versions there are contextual help (poke into a question) with reference to the knowledge base.Deart.69 @ 12/17/18, 11:59
Tamble this device with GPON Rostelecom via SFP connector
If moderators allow, a couple of links tell on the topic
Reference 1
Reference 2
reference 3
It seems that there was a positive experience in some region with the D-Link DPN-100 module
Post has been editedenpa - 17.01.19, 19:11
Reason for editing: in the header
Question to experts. Only today began to use Sabzh, never had a business with the kinetics (he switched from Asus) and disappointment immediately arose. In Asus, I actively use the Network Services Filter, in which you can limit the device in the locator to go to certain IP addresses / ports (see Screenshot). And in the kinetics I did not find this. Called in TP, they said that such a functionality was not yet implemented. Is it so? And is there any way to implement this, using packages, Opkg? I would not want to take a router because of this. Thank you in advance.
Post has been editedcool78 - 17.12.18, 18:06
Attached images
 |
Post has been editedcool78 - 17.12.18, 18:06
Question about Sabzh, how does he cope with torrents 200-300Megabit pulls? And does the external tight 8-10 terrabite sees?
Aseeer, 1. Maximum torrent recording speed up to 15 MB.
2. Yes, without problems, it determines and works with a large-volume carrier, the table of sections of the MBR \ GPT, the factory \ not factory markup.
enpa, Thanks for the answer. And the mass injection (10-15torrents) it will pull out?
I have a question, and if you take ultra (model more expensive), how much will it pull?
Yeshe the question, what will be the speed of a gigabit network from USB 3.0 hard, through FTP, for example?
Post has been editedAseeer. - 17.12.18, 19:01
Cool78 @ 12/17/18, 18:05
In Asus, I actively use the Network Services Filter, in which you can limit the device in the locator to go to certain IP addresses / ports (see Creinshot)
Network rules, firewall.
Choose an interface and write the rules.
Aseeer, In KN-1810, a similar switch \ chip, so the power is similar, only the wireless part is more powerful.Cool78 @ 12/17/18, 18:05
In Asus, I actively use the Network Services Filter, in which you can limit the device in the locator to go to certain IP addresses / ports (see Screenshot). And in the kinetics I did not find this. Called in TP, they said that such a functionality was not yet implemented. Is it so?
Everything is configured in the firewall. You have already given links. Support something stepped or did not understand you on the phone.
Posted on 12/17/2018, 19:30:
Aseeer @ 12/17/18, 19:00
And the mass injection (10-15torrents) it will pull out?
For all, I will clarify that if you swing a computer - any speed will crawl through the guy / ultra. If the integrated transmission, then do not count more than 100 Mbps. And 10-15 downloads simultaneously only slow down the process in general. It is better to set up a queue for one or three simultaneous downloads. Distribute, however, the kinetics may well be dozens of torrents.
©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement