Keenetic Giga (KN-1010) - Discussion | [wifirouter]



Rep: (1133)
Keenetic Giga (KN-1010)- Discussion
ZyXEL Keenetic Giga III - Discussion
Attached Image

Information
Description
  • Product Name: Giga
  • Part Number: KN-1010-01RU
  • NDM HW ID: KN-1010
  • Wi-Fi AC1300 Wave 2 MU-MIMO 2.4 + 5 GHz with four amplifiers and 5 dBi antennas
  • Any Internet tariffs up to 1 Gbps, MultiWAN, IPTV and Smart TV
  • SFP port for connecting via fiber optic cable
  • USB 2.0 and 3.0 for 3G / 4G / LTE / DSL modems, disks, printer or DECT station
  • File server, DLNA, Time Machine, standalone torrent client Transmission
  • Yandex.DNS and SkyDNS: protection against cyber threats and parental control
  • Configure and manage your home network via mobileattachment

Additional photo
Specifications
Main characteristics

The index of the model is KN-1010
Processor - MediaTek MT7621AT (MIPS1004Kc) @ 880 MHz, 2 cores
RAM - Nanya NT5CC128M16IP-DI 256MB (DDR3-1600)
Flash-memory - Spansion S34ML01G200TF100 128MB (Dual Boot, NAND)
Wi-Fi 2.4 + 5 GHz - Yes
Class Wi-Fi - MediaTek MT7615DN - 2x 2T2R 2.4 / 5GHz (400 + 867Mbps)
Antennas - 4x 5dBi (FEM Skyworks SKY85303-11 (ePA / eLNA) 2,4GHz, FEM Skyworks SKY85717-21 (ePA / eLNA) 5GHz, fixed PIFA ext), AC1200 (ARM + Andes)
Ports - SFP: 1x GE (RTL8211FS combo GPHY), RJ45: 5x GE (10/100/1000)

Wi-Fi / WPS button ✔
FN button - Yes, two buttons
USB ports ✔
3G / 4G connectivity - Via compatible USB modem
Connect via DSL ADSL2 + / VDSL2 viaKeenetic Plus DSL
Telephony support -C Keenetic Plus DECT
Support module for Wi-Fi ✔

Performance

2.4 GHz Wi-Fi network speed - 400 Mbps
5 GHz Wi-Fi network speed - 867 Mbps
Gigabit home network ✔
For tariffs above 100 Mbit / s ✔
IPoE / PPPoE Routing - Up to 1800 Mbps Duplex
L2TP / PPTP Routing - Up to 800 Mbps
Reading from a USB disk - 90 MB / s (USB 3.0)

Functions and protocols

IPoE ✔
PPPoE ✔
PPTP ✔
L2TP ✔
802.1x
CABiNET ✔
Multiple PPP Tunnels ✔
PAP / CHAP / MS-CHAP / MS-CHAP v2 ✔
MPPE (Auto / 40/56/128)
VLAN IEEE 802.1Q ✔
Route Table (DHCP / Manual) ✔
Link Duo ✔
IntelliQoS ✔
DHCP (client / server) ✔
IPv6 Dual Stack ✔
NAT ✔
Igmp ✔
UPnP
Manual port forwarding ✔
PPTP / L2TP Transit ✔
SPI DoS Attack Firewall ✔
Ping checker ✔

Wi-Fi wireless network

Seamless roaming 802.11 k / r / v ✔
MU-MIMO ✔
Airtime Fairness ✔
Beamforming ✔
Pre-configured protection Wi-Fi ✔
WEP, WPA-PSK ✔
WPA2-PSK, WPA2-Enterprise ✔
WPA3-PSK, WPA3-Enterprise, OWE ✔
Multi-SSID and guest network ✔
MAC access control ✔
Wi-Fi Multimedia (WMM)

Applications

Mobile application for Android and iOS ✔
Transmission torrent client ✔
File server ✔
DLNA server ✔
UDP to HTTP proxy ✔
FTP server ✔
Print server ✔
IPSec VPN Client / Server ✔
PPTP VPN server - 10 tunnels
Internet filter Yandex.DNS ✔
Parental control SkyDNS ✔
Dynamic DNS client ✔

Physical characteristics and environmental conditions

Device dimensions without antenna, W x D x H - 214mm x 154mm x 33mm
Mass of the device - 488g.
Operating temperature range - 0–40 ° С
Humidity of the ambient air during operation - 20–95%
Power supply - 100–240 V 50/60 Hz

Diagnostics and control

Web configurator in Russian ✔
Command Line (CLI) by TELNET
The ability to control from the external network ✔
Backup and restore configuration ✔
Software update features ✔
Logging system events ✔

Equipment

Device
Power adapter ✔
Ethernet cable ✔
Instructions for use ✔
List of supported SFP modules
Certificates
Documentation
Reviews, links
Useful information
Problem solving, setup
NDMS V2 + Entware
Keenopt setup
OpenVPN setup
[Entware] Raise OpenVPN server
[Entware] Openvpn client on the router
Enable 802.11n standard on NDMSv2 firmware (via CLI TELNET)
Forced assignment of N mode (compatibility N) for Wi-Fi via CLI from enpa
Wordpress on Entware
How to print from phone to printer via Android OS
Antenna Comfast CF-ANT2410DA for a place native to Keenetic II, Giga II
Flash modem in HiLink for maximum speed
CAT5 HiLink Speed ​​Test
All about IP Cloud (KeenDNS)
"White" IP from Rostelecom using Entware
Wake on Lan (WOL) function in ZyXEL Keenetic routers
A bit of theory on the mechanism of updating NDMSv2 firmware from _Danila_Master_
Yandex disk / WebDAV in ZyXEL Keenetic
How to change the network name of the smartphone in Android?
EaseUS Partition Master Free is a handy program for partitioning a hard disk into partitions (suitable for creating a partition in ext3, creating two ntfs & ext3 partitions).
What type of file system and paging file is best to use? Enpa description
What type of file system and paging file is best to use? Option from miltt
Correction of the Transmission operation without reinstalling the router firmware from enpa
How to determine the type of antenna connector (SMA / RP-SMA)?
NTP SERVERS - time servers
Using the zram paging file (LZO) for the swap location from enpa
Creating an ISP (Internet Service Provider) interface via CLI (command line) from enpa
Lock site by name on the firmware from dezhik
If you need port 5 to distribute the Internet to devices on the wire from enpa
Speed ​​limit via CLI (command line) from enpa
PuTTY is a client program for working with network protocols SSH, Telnet, SCP, SFTP, for connecting via a COM port and ZModem, a utility for generating RSA and DSA digital SSH keys.
Solving the problem with ping in games specifically WOT for Wi-Fi from freealbert
WPS on a router - what it is and how to use it
Setting up a connection to a working VPN server using a "gray IP" at the provider from YEDkii
Forced assignment of speed on the port of the router through the CLI from enpa
Resetting factory settings (factory-reset) via CLI from enpa
2 ways to change the MAC address of a computer network card
Zyxel Keenetic Giga III + Zyxel Keenetic Plus DECT - Internet and telephony in the office from WOOF11
The impact of USB 3.0 devices on the quality of data transmission over the air
ΜTorrent client setup
Zyxel GIGA III router: setting up simultaneous work with several Internet channels from Sergei Golubitskiy (youtube video instruction)
Extending your home Wi-Fi network with Dalex-NEMAN ZyXEL PLA4201v2 EE powerline adapters
We fix the display of interfaces in the Connections section of enpa
Installing Keenetic Giga III in a private house from olezel
Setting up remote access Transmission from enpa
Setting up and installing minidlna (1.1.6 + git-8a996b-1) opag-package from enpa
Configuring and installing the syslog-ng opkg-package for recording logs to external media from enpa
Firmware update using enpa CLI TELNET command line
Turning off the LEDs of the router using the CLA TELNET command line from enpa
Disabling the FN button LED using the enpa CLI TELNET command line
When adding a torrent, you can choose which files to download?
Solving display problems \ login by domain name (hostname) of Keenetic router in Windows 10 from enpa
Using the WAN port as a LAN port in Keenetic Giga III \ Ultra II using the enpa CLI TELNET command line
Changing a Wi-Fi wireless channel in Keenetic using the enpa CLI TELNET command line
Configure automatic reboot using CLI TELNET by _Danila_Master_
Comments on the work of the Padavana TX Burst
Four Stream - Does the KN-1010 HT processor software support? Information from balian007
Installing and configuring Transmission 2.93 from Opkg Entware-3x for Keenetic Giga KN-1010 from enpa
Solving the problem of hard disk sleep using the OPKG package hdparm from balian007
Jellyfish Video Bitrate Test Files -.mkv files for testing streaming video and playing multimedia.
Installing and configuring ntfs-3g-utils from Opkg Entware for Keenetic from enpa
MT7615 Wireless Driver Information 4.4.1.2 from Padavan
Information about capacitors in KN-1010 \ KN-1810 from Ilya Khrupalov
Bridge mode for the optical terminal Rostelecom from healer2001
An example of creating a directory using the command 'mkdir' in the console from enpa
Using Emoji in the name of the Access Point of the Keenetic router from enpa
Registering the MAC address of the host in the Home segment using the console from enpa
Adding the MAC address of the Wi-Fi client device to the white or black list. When will the setting return to WebUI?
Setting up selective routing via imageMaster TOR
Anonymous access requests username / password via SMB \ CIFS protocol
Configuring access to the web interface via the Guest network from enpa
Turn on seamless Wi-Fi roaming and block Internet advertising on Keenetic routers from hwp.ru
4K and KN-1010 bedrocker tuning and testing recommendation
How to make friends with a device with GPON Rostelecom via SFP connector
Installing and configuring the smstools3 package on the Keenetic Giga (KN-1010) router for sending SMS
Example of setting up connection priority for a torrent client from enpa
Setting push notifications and alerts from Keenetic router from enpa
How to set up simultaneous access to files and printers in the user WindowsOS of 0998987
TTL lock
Keenetic Recovery
Instructions

Internet connection setup:

Install and configure KeeneticOS:

Reset:

Diagnostics:

Recovery firmware:

Reservation

Speed ​​Limit:

Remote access:

VLAN:

Forwarding and port configuration:

Wi-Fi setup:

WPS (Wi-Fi Protected Setup):

Security and DNS:

schedule :

Tunnels: PPTP, L2TP \ IPSec, IPSec, SSTP, OpenVPN, Wireguard, VPN-server:

File server and USB-drives:

FTP server:

BitTorrent Transmission Client:

DLNA:

Digital television:

USB printer:

CLI (command line), SSH:

Modes:

3G / 4G modems:

Digital telephony:

OPKG packages:

IntelliQoS:
Internet speed testing
http://www.speedtest.net/ru/
https://www.nperf.com/ru/
https://2ip.ru/speed/

Attention! Testing servers are provided by external providers and the results of such tests depend on many technical factors.

Test results from these services can only be used for diagnostic purposes.
Application to manage the router
Transmission Management Application
Firmware


The official version of KeeneticOS
KeeneticOS out of the box

2.10

2.11

2.12

2.13

2.14

2.15

3.00

3.01

3.03
Debug version of KeeneticOS
Debug - test (draft) release of the operating system. Repeats the functionality that is in the officially released versions of "Release" or "Beta", but also contains additional fixes and new features. The debug version is under development and may contain bugs.

  • Testing debug versions of KeeneticOS is carried out on the forum Keenetic -here.
  • Changelog of debug versions of KeeneticOS -here.
  • Binary files debug versions KeeneticOS, can be downloaded in Files Keenetic -hereandhere
The program for recovering firmware Keenetic Giga KN-1010.
KeeneticOS firmware catalog

The curator of the topic is enpa


Post has been editedenpa - 01.02.20, 20:55
Reason for editing: Cap - technical specifications



Rep: (6)
* Hagakurje
Judging by the last record (in the provided "log"), you have not had a lot of successful attempts to obtain a certificate. And that is why, it is a question. Maybe you have the settings are not allowed. Because of.podderzhka quickly understand.



Rep: (163)
* AndreBA, I would say that according to the penultimate entry, the request for acme-v02.api returned that something is not right. In support wrote, let's see what will say.

Post has been editedHagakurje - 28.09.19, 21:05



Rep: (5)
A question. Why is the mobile app me keenetic some settings and when logging in through a browser a few others. For example wpa3 encryption type does not appear in the application for Android



Rep: (12)
Hagakurje @ 28.09.19, 19:45*
I decided to include KeenDNS yesterday. I choose a domain name, and have about a day writes "Obtaining the certificate ...". It works over HTTP access. Something you can do with it, or wait for another?
The latest stable firmware 3.1

The same story was to support the answer:
The problem is related to the update server on the CDN-party certification authority.
Server updated to version KeeneticOS 3.1.5
Updated to 3.1.6 and got the certificate.



Rep: (113)
* ezhik_13 ,
Wpa3 have the new version of the application



Rep: (163)
space75man @ 28.09.19, 21:30*
Updated to 3.1.6 and got the certificate.

and precisely in the description 3.1.4 "ACME: improved compatibility with the new CDN Let's Encrypt;". Interestingly, when the stable version will be this year or next?



Rep: (12)
ezhik_13 @ 28.09.19, 21:29*
For example wpa3 encryption type does not appear in the application for Android

So yuzayte through a browser (domain name), in the mobile application is less than the settings.



Rep: (18)
There is a problem. Every day (a week for sure) when I go to a removable drive attached to the router, see Photo.scr files in each folder on the disk. Kaspersky removes them immediately. It is clear that this kind of disgusting, but as it gets there, and how to stop it?



Rep: (12)
Hagakurje @ 28.09.19, 21:34*
Interestingly, when the stable version will be this year or next?

Yes like is not delayed, once a month or two out.



Rep: (12)
dant73 @ 28.09.19, 21:35*
but how it gets there, and how to stop it?

A quick search on Yandex showed a PC on Windows: c: \ frst \ photo.scr - Trojan.Win32.Agentb.btdr (BitDefender: Trojan.GenericKD.3039704)
And here's another version about ftp:


Post has been editedspace75man - 28.09.19, 22:01



Rep: (18)
And this Trojan can settle in the router? Sorry for the stupid question. Just sometimes the list of connected devices appears an unknown device is connected through a wire. All passwords which can already be replaced.



Rep: (12)
dant73 @ 28.09.19, 22:45*
And this Trojan can settle in the router?

That's the theme of a similar problem, but it is unclear how to cure.



Rep: (15)
* dant73 With half a year ago I was the same faced with such a problem, even in this thread Signed Off. It all began with the fact that I have received from the provider white ip and set up access to FTP, but forgot to uncheck anonymity is conferred in access! Immediately the same could not understand where this stuff climbs on infected computers and home to the heap: lol:, the benefit can be easily removed this crap!



Rep: (163)
space75man @ 28.09.19, 21:30*
The same story was to support the answer:
The problem is related to the update server on the CDN-party certification authority.
Server updated to version KeeneticOS 3.1.5
Updated to 3.1.6 and got the certificate.

And I support said:
good day
We observed technical problems with certificate.
If the problem is not resolved on Monday, please.

Pro firmware update does not say, look, tomorrow may still work.



Rep: (106)
Hagakurje @ 29.09.19, 10:49*
space75man @ 28.09.19, 21:30
The same story was to support the answer:
The problem is related to the update server on the CDN-party certification authority.
Server updated to version KeeneticOS 3.1.5
Updated to 3.1.6 and got the certificate.

And I support said:
good day
We observed technical problems with certificate.
If the problem is not resolved on Monday, please.

Pro firmware update does not say, look, tomorrow may still work.

I have the same problem - hanging "certification" for the third day. Risked renewed on a prerelease version 3.1.6 - it worked.
ZY IMHO even "Control Panel" became more bright work



Rep: (163)
* bokin,
I'll wait until probably :)



Rep: (12)
Hagakurje @ 29.09.19, 11:49*
Pro firmware update does not say, look, tomorrow may still work.

And on Monday advised to upgrade).



Rep: (106)
Comrades. A question.
Can I set up a VPN on the router to bypass the blocking of sites? Poke your nose into an available manual



Rep: (113)
* bokin ,
https://m.habr.com/ru/post/428992/



Rep: (16)
bokin @ 29.09.19, 12:04*
Comrades. A question.
Can I set up a VPN on the router to bypass the blocking of sites? Poke your nose into an available manual


The best way to thishttps: //forum.keenetic...B5%D1%80%D0%B5/page/3/


Full version    

Help     rules

Time is now: 25/02/20, 16:14