Keenetic Giga (KN-1010) - Discussion | [wifirouter]

Rep: (1135)
Keenetic Giga (KN-1010)- Discussion
ZyXEL Keenetic Giga III - Discussion
Attached Image

  • Product Name: Giga
  • Part Number: KN-1010-01RU
  • NDM HW ID: KN-1010
  • Wi-Fi AC1300 Wave 2 MU-MIMO 2.4 + 5 GHz with four amplifiers and 5 dBi antennas
  • Any Internet tariffs up to 1 Gbps, MultiWAN, IPTV and Smart TV
  • SFP port for connecting via fiber optic cable
  • USB 2.0 and 3.0 for 3G / 4G / LTE / DSL modems, disks, printer or DECT station
  • File server, DLNA, Time Machine, standalone torrent client Transmission
  • Yandex.DNS and SkyDNS: protection against cyber threats and parental control
  • Configure and manage your home network via mobileattachment

Additional photo
Main characteristics

The index of the model is KN-1010
Processor - MediaTek MT7621AT (MIPS1004Kc) @ 880 MHz, 2 cores
RAM - Nanya NT5CC128M16IP-DI 256MB (DDR3-1600)
Flash-memory - Spansion S34ML01G200TF100 128MB (Dual Boot, NAND)
Wi-Fi 2.4 + 5 GHz - Yes
Class Wi-Fi - MediaTek MT7615DN - 2x 2T2R 2.4 / 5GHz (400 + 867Mbps)
Antennas - 4x 5dBi (FEM Skyworks SKY85303-11 (ePA / eLNA) 2,4GHz, FEM Skyworks SKY85717-21 (ePA / eLNA) 5GHz, fixed PIFA ext), AC1200 (ARM + Andes)
Ports - SFP: 1x GE (RTL8211FS combo GPHY), RJ45: 5x GE (10/100/1000)

Wi-Fi / WPS button ✔
FN button - Yes, two buttons
USB ports ✔
3G / 4G connectivity - Via compatible USB modem
Connect via DSL ADSL2 + / VDSL2 viaKeenetic Plus DSL
Telephony support -C Keenetic Plus DECT
Support module for Wi-Fi ✔


2.4 GHz Wi-Fi network speed - 400 Mbps
5 GHz Wi-Fi network speed - 867 Mbps
Gigabit home network ✔
For tariffs above 100 Mbit / s ✔
IPoE / PPPoE Routing - Up to 1800 Mbps Duplex
L2TP / PPTP Routing - Up to 800 Mbps
Reading from a USB disk - 90 MB / s (USB 3.0)

Functions and protocols

IPoE ✔
L2TP ✔
Multiple PPP Tunnels ✔
MPPE (Auto / 40/56/128)
VLAN IEEE 802.1Q ✔
Route Table (DHCP / Manual) ✔
Link Duo ✔
IntelliQoS ✔
DHCP (client / server) ✔
IPv6 Dual Stack ✔
Igmp ✔
Manual port forwarding ✔
PPTP / L2TP Transit ✔
SPI DoS Attack Firewall ✔
Ping checker ✔

Wi-Fi wireless network

Seamless roaming 802.11 k / r / v ✔
Airtime Fairness ✔
Beamforming ✔
Pre-configured protection Wi-Fi ✔
WPA2-PSK, WPA2-Enterprise ✔
WPA3-PSK, WPA3-Enterprise, OWE ✔
Multi-SSID and guest network ✔
MAC access control ✔
Wi-Fi Multimedia (WMM)


Mobile application for Android and iOS ✔
Transmission torrent client ✔
File server ✔
DLNA server ✔
UDP to HTTP proxy ✔
FTP server ✔
Print server ✔
IPSec VPN Client / Server ✔
PPTP VPN server - 10 tunnels
Internet filter Yandex.DNS ✔
Parental control SkyDNS ✔
Dynamic DNS client ✔

Physical characteristics and environmental conditions

Device dimensions without antenna, W x D x H - 214mm x 154mm x 33mm
Mass of the device - 488g.
Operating temperature range - 0–40 ° С
Humidity of the ambient air during operation - 20–95%
Power supply - 100–240 V 50/60 Hz

Diagnostics and control

Web configurator in Russian ✔
Command Line (CLI) by TELNET
The ability to control from the external network ✔
Backup and restore configuration ✔
Software update features ✔
Logging system events ✔


Power adapter ✔
Ethernet cable ✔
Instructions for use ✔
List of supported SFP modules
Reviews, links
Useful information
Problem solving, setup
NDMS V2 + Entware
Keenopt setup
OpenVPN setup
[Entware] Raise OpenVPN server
[Entware] Openvpn client on the router
Enable 802.11n standard on NDMSv2 firmware (via CLI TELNET)
Forced assignment of N mode (compatibility N) for Wi-Fi via CLI from enpa
Wordpress on Entware
How to print from phone to printer via Android OS
Antenna Comfast CF-ANT2410DA for a place native to Keenetic II, Giga II
Flash modem in HiLink for maximum speed
CAT5 HiLink Speed ​​Test
All about IP Cloud (KeenDNS)
"White" IP from Rostelecom using Entware
Wake on Lan (WOL) function in ZyXEL Keenetic routers
A bit of theory on the mechanism of updating NDMSv2 firmware from _Danila_Master_
Yandex disk / WebDAV in ZyXEL Keenetic
How to change the network name of the smartphone in Android?
EaseUS Partition Master Free is a handy program for partitioning a hard disk into partitions (suitable for creating a partition in ext3, creating two ntfs & ext3 partitions).
What type of file system and paging file is best to use? Enpa description
What type of file system and paging file is best to use? Option from miltt
Correction of the Transmission operation without reinstalling the router firmware from enpa
How to determine the type of antenna connector (SMA / RP-SMA)?
NTP SERVERS - time servers
Using the zram paging file (LZO) for the swap location from enpa
Creating an ISP (Internet Service Provider) interface via CLI (command line) from enpa
Lock site by name on the firmware from dezhik
If you need port 5 to distribute the Internet to devices on the wire from enpa
Speed ​​limit via CLI (command line) from enpa
PuTTY is a client program for working with network protocols SSH, Telnet, SCP, SFTP, for connecting via a COM port and ZModem, a utility for generating RSA and DSA digital SSH keys.
Solving the problem with ping in games specifically WOT for Wi-Fi from freealbert
WPS on a router - what it is and how to use it
Setting up a connection to a working VPN server using a "gray IP" at the provider from YEDkii
Forced assignment of speed on the port of the router through the CLI from enpa
Resetting factory settings (factory-reset) via CLI from enpa
2 ways to change the MAC address of a computer network card
Zyxel Keenetic Giga III + Zyxel Keenetic Plus DECT - Internet and telephony in the office from WOOF11
The impact of USB 3.0 devices on the quality of data transmission over the air
ΜTorrent client setup
Zyxel GIGA III router: setting up simultaneous work with several Internet channels from Sergei Golubitskiy (youtube video instruction)
Extending your home Wi-Fi network with Dalex-NEMAN ZyXEL PLA4201v2 EE powerline adapters
We fix the display of interfaces in the Connections section of enpa
Installing Keenetic Giga III in a private house from olezel
Setting up remote access Transmission from enpa
Setting up and installing minidlna (1.1.6 + git-8a996b-1) opag-package from enpa
Configuring and installing the syslog-ng opkg-package for recording logs to external media from enpa
Firmware update using enpa CLI TELNET command line
Turning off the LEDs of the router using the CLA TELNET command line from enpa
Disabling the FN button LED using the enpa CLI TELNET command line
When adding a torrent, you can choose which files to download?
Solving display problems \ login by domain name (hostname) of Keenetic router in Windows 10 from enpa
Using the WAN port as a LAN port in Keenetic Giga III \ Ultra II using the enpa CLI TELNET command line
Changing a Wi-Fi wireless channel in Keenetic using the enpa CLI TELNET command line
Configure automatic reboot using CLI TELNET by _Danila_Master_
Comments on the work of the Padavana TX Burst
Four Stream - Does the KN-1010 HT processor software support? Information from balian007
Installing and configuring Transmission 2.93 from Opkg Entware-3x for Keenetic Giga KN-1010 from enpa
Solving the problem of hard disk sleep using the OPKG package hdparm from balian007
Jellyfish Video Bitrate Test Files -.mkv files for testing streaming video and playing multimedia.
Installing and configuring ntfs-3g-utils from Opkg Entware for Keenetic from enpa
MT7615 Wireless Driver Information from Padavan
Information about capacitors in KN-1010 \ KN-1810 from Ilya Khrupalov
Bridge mode for the optical terminal Rostelecom from healer2001
An example of creating a directory using the command 'mkdir' in the console from enpa
Using Emoji in the name of the Access Point of the Keenetic router from enpa
Registering the MAC address of the host in the Home segment using the console from enpa
Adding the MAC address of the Wi-Fi client device to the white or black list. When will the setting return to WebUI?
Setting up selective routing via imageMaster TOR
Anonymous access requests username / password via SMB \ CIFS protocol
Configuring access to the web interface via the Guest network from enpa
Turn on seamless Wi-Fi roaming and block Internet advertising on Keenetic routers from
4K and KN-1010 bedrocker tuning and testing recommendation
How to make friends with a device with GPON Rostelecom via SFP connector
Installing and configuring the smstools3 package on the Keenetic Giga (KN-1010) router for sending SMS
Example of setting up connection priority for a torrent client from enpa
Setting push notifications and alerts from Keenetic router from enpa
How to set up simultaneous access to files and printers in the user WindowsOS of 0998987
TTL lock
Keenetic Recovery

Internet connection setup:

Install and configure KeeneticOS:



Recovery firmware:


Speed ​​Limit:

Remote access:


Forwarding and port configuration:

Wi-Fi setup:

WPS (Wi-Fi Protected Setup):

Security and DNS:

schedule :

Tunnels: PPTP, L2TP \ IPSec, IPSec, SSTP, OpenVPN, Wireguard, VPN-server:

File server and USB-drives:

FTP server:

BitTorrent Transmission Client:


Digital television:

USB printer:

CLI (command line), SSH:


3G / 4G modems:

Digital telephony:

OPKG packages:

Internet speed testing

Attention! Testing servers are provided by external providers and the results of such tests depend on many technical factors.

Test results from these services can only be used for diagnostic purposes.
Application to manage the router
Transmission Management Application

The official version of KeeneticOS
KeeneticOS out of the box









Debug version of KeeneticOS
Debug - test (draft) release of the operating system. Repeats the functionality that is in the officially released versions of "Release" or "Beta", but also contains additional fixes and new features. The debug version is under development and may contain bugs.

  • Testing debug versions of KeeneticOS is carried out on the forum Keenetic -here.
  • Changelog of debug versions of KeeneticOS -here.
  • Binary files debug versions KeeneticOS, can be downloaded in Files Keenetic -hereandhere
The program for recovering firmware Keenetic Giga KN-1010.
KeeneticOS firmware catalog

The curator of the topic is enpa

Post has been editedenpa - 01.02.20, 20:55
Reason for editing: Cap - technical specifications

Rep: (27)
* valeramalko ,
I'm 100 km from the router so interested in the option to enter into it through the smartphone through My Keenetic, as I understand in this prog does not have these advanced settings, and so it is clear how near it through a Web interface to enter these settings.

Post has been editedWARs74 - 17.09.19, 17:48
Reason for editing: Completed

Rep: (113)
* WARs74 ,
Through keendns you can access a router from anywhere in the world, in the presence of gray ip

Post has been editedebsysert1983 - 17.09.19, 17:57

Rep: (27)
Thanks to everyone to unsubscribe, downloaded set Keenetic beta, went looking pool - stands at 40. What other options can be overflow of the access point, if more freely under 39 devices? Can Reset and reconfigure everything again? So like just bought, managed to set up the network and forwarding the ports for xbox one X, more than anything else is not set up in it. Only update the last set.

Post has been editedWARs74 - 17.09.19, 18:11
Reason for editing: Completed

Rep: (6)
WARs74 @ 17.09.19, 18:07*
Thanks to everyone to unsubscribe, downloaded set Keenetic beta, went looking pool - stands at 40. What other options can be overflow of the access point, if more freely under 39 devices?

You wrote that you have many devices are registered ... Increase the "Pool" to 100 and see.
Still in the "log" to see what was being written when attempting to connect a smart.

Post has been editedAndreBA - 17.09.19, 18:18

Rep: (27)
* AndreBA ,
Total 11 registered: 2CO, XOX, ps4, xbox360, Smart TV 2 and 4 smartphone.
At that time, when a problem is detected, only one PC has been in the network of zaregenyh, and try to go with a smartphone nezaregennogo issue "is full, the access point" despite the fact that 39 of the 40 were free.

Rep: (16)
* boomerchik ,
I have already answered this question ->Keenetic Giga (KN-1010) - Discussion (Post VladimirVV84 # 80654115)

Rep: (6)
WARs74 @ 17.09.19, 18:53*
Total 11 registered: 2CO, XOX, ps4, xbox360, Smart TV 2 and 4 smartphone.

If 11 registered (and fixed IP), means free from 29 40. Should work. Try all the same to make a complete reset (all the more wanted to do) and set up from scratch and check. Will all still refer to of.podderzhku. There will consider and prompt quicker.

Post has been editedAndreBA - 17.09.19, 19:27

Rep: (0)
People tell. Can I customize transmishn using a smartphone without a computer? If so, how? I can not understand.

Rep: (0)
stasyansky @ 17.09.19, 11:41*
Similarly, after the upgrade to 3.1. Devices that are not currently on the network, the devices appear in the list, then disappear.

I thought so. The first day was the "native" firmware 2.15 or below, do not remember exactly, and not notice. But it was not possible to revert and make sure. I wrote yesterday in TP, the reference in the work. Accomplish your goal when the answer.

Post has been editedmmazay - 17.09.19, 22:59

Rep: (1011) @ 18.09.19, 0:45*
Can I customize transmishn using a smartphone without a computer?
can be in the application or My Keenetic Keenetic beta (go to Applications - Torrent, select a folder to download to enable torrent client), and can be in the browser go to the mobile web interface of the router and also include a torrent client.

Post has been editedvaleramalko - 17.09.19, 22:53

Rep: (18)
There is a problem. On the drive connected to the router, movies on your computer weighing over 3gigov not be played. On the TV, go and 25gigov without problems.

Rep: (510)
* dant73,
Look for a solution to the connection settings, go to 100GB at a normal setting.

Rep: (6)
Did bypass locks and ad blocking on this instruction

Now Rides CPU loading to 50-80%. All the way or it is a normal situation.

Rep: (0)
* valeramalko In the application reports that the client is not installed.

Rep: (1011) @ 18.09.19, 8:24*
client is not installed
install the component in the section keeneticOS
Attached Image

Rep: (0)
* valeramalko I slider moves to the right, but nothing changes. When you next log into the application, it is switched off again and says that is not installed. So I think it will not work without a computer set. The description says that the settings should be USB-bit torrent add a tick, and in the mobile app has no such functions. I'll have the computer must look for.

Rep: (0)
Everything was decided trite just updated the firmware, did exactly the same configuration as the firmware from the box and voila .... it worked! Wonders))))

Rep: (1011) @ 18.09.19, 10:58*
the slider moves to the right, but nothing changes.
after adding the component must download and install the firmware on the router, after the selected component to press the top of the '' Device Update ', it takes some time and is not always the first time injected firmware @ 18.09.19, 10:58*
The description says that the settings should be USB-bit torrent add a tick, and in the mobile app has no such functions.
It has the same thing - the slider @ 18.09.19, 10:58*
I'll have the computer must look for.
not necessarily, you can do through the mobile browser settings.

Post has been editedvaleramalko - 18.09.19, 09:12

Rep: (0)
* valeramalko I have it on, but does not burn blue and kenetikOS too] [
attachment = "17377480: Screenshot_20190918-114018_MyKeenetic.jpg"]
Attached Image

Attached images
Attached Image

Rep: (1011) @ 18.09.19, 12:44*
I have it enabled
not enabled, move the slider to the right, will be lower than it is written that the component will be installed, then click 'Update device' '
Now it should look like (on the screenshot the other component for example)
Attached Image

Post has been editedvaleramalko - 18.09.19, 10:50

Full version    

Help     rules

Time is now: 28/02/20, 12:27